Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷的极化工艺研究

主要研究了极化电场,极化时间和极化温度等工艺参数对Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷介电和压电性能的影响。结果表明:极化电场和极化温度对压电陶瓷的介电、压电性能影响较大,而极化时间则影响较小。适宜的极化电场是3～3.5kV/mm,极化温度70～80℃,极化时间为10～15min。     

Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3系无铅压电陶瓷的制备工艺研究

利用XRD、SEM等分析技术 ,研究了Na0 .5Bi0 .5TiO3 -K0 .5Bi0 .5TiO3 系无铅压电陶瓷的合成温度 ,烧成工艺条件对陶瓷晶体结构、压电性能的影响。结果表明 ,合成温度提高有利于主晶相的形成 ,适当延长保温时间有利于材料的压电性能。该体系随着KBT含量的增加 ,烧结温度提高 ,烧结温度范围变窄。同时研究了极化工艺条件对材料压电性能的影响表明 ,提高极化电场和适当提高极化温度有利于压电性能的提高 ,但过高的温度由于受到材料高温下退极化的影响而导致材料压电性能变差     

(1-x)Na0.5 Bi0.5 TiO3-xNaNbO3系无铅压电陶瓷的机电性能

采用传统陶瓷的制备方法,制备了(1-x)Na0.5Bi0.5TiO3-xNaNbO3(r=0～0．08)压电陶瓷。X射线衍射分析表明：所研究的组成均能够形成纯钙钛矿(ABOx)型固溶体。不同频率下陶瓷材料的介电常数-温度曲线显示该体系材料具有典型的弛豫铁电体特征,且随着x的增加,其弛豫性特征愈明显。室温下陶瓷材料的饱和电滞回线表明：所研究组成均为铁电体．材料的剩余极化强度P1在x=0．02时具有最大值。检测了不同组成陶瓷的雎电性能,发现材料的压电常数d33和平面机电耦合系数Kp随着x值的增加先增加后降低,在x=0．02时．陶瓷的d33=88pC／N,Kp=0．1792,为所研究组成中的最大值．材料的介电常数εI3/ε0和介电损耗tanδ则随x值的增加而增加。     

Na0.5Bi0.5TiO3-Ba0.5Sr0.5Nb2O6无铅压电陶瓷的研究

采用固相法制备了(1-x)(Na0.5Bi0.5)TiO3-xBa0.5Sr0.5Nb2O6(0≤x≤1.0％)(简称(1-x)NBT-xBSN)无铅压电陶瓷,研究了不同BSN含量(x=0,0.1％,0.3％,0.5％,0.7％,1.0％,摩尔分数)样品的物相组成、显微结构及电性能.结果表明:所有样品均为纯钙钛矿结构,随掺杂量x的增加,陶瓷的相对密度pr、压电常数d33和机电耦合系数kp均先增大后降低,机械品质因子Qm和退极化温度Td则逐渐下降.该体系陶瓷具有弥散相变特征,弥散指数介于1.6～1.7.当x=0.5％时,陶瓷获得最佳性能:d33=92pC/N,kp=0.164,Qm=89,εr=650,tanδ=5.47％,pr=96.5％.     

(Na1-xKx)0.5Bi0.5TiO3系的离子挥发性研究

利用固相法制备了(Na1-xKx)0.5Bi0.5TiO3系压电陶瓷,研究其中Bi3 、Na 、K 离子的挥发对其性能的影响。研究结果表明Bi3 的挥发性对样品的性能影响较大,而Na 、K 离子相对较小。     

Bi0.5Na0.5TiO3基无铅压电陶瓷设计与制备研究的新进展

综述了Bi0.5Na0.5TiO3(BNW)基无铅压电陶瓷体系研究的最新进展,介绍了BNT基无铅压电陶瓷的设计方法及其制备技术.用自洽场离散变分法(self-consult charge-discrete variation-Xa,SCC-DV-Xa)等计算方法可为设计新型BNT基陶瓷提供重要的理论指导.用湿化学法,包括:溶胶-凝胶法、柠檬酸盐法、水热法等,可以合成BNT基纳米粉体,该类方法制备的BNT基粉体具有良好烧结活性,利于致密化烧结,使材料电性能得到改善.用模板晶粒生长技术可获得晶粒生长定向程度很高的BNT基压电陶瓷材料,进而提高材料在特定方向的压电性能.     

溶胶-凝胶法合成(Na0.5Bi0.5)TiO3微粉

以钛酸四丁酯、硝酸铋、醋酸钠和冰醋酸为原料,利用溶胶-凝胶工艺得到透明凝胶,经干燥后煅烧成(Na0.5Bi0.5)TiO3微粉。通过对溶胶体系水/醇盐的摩尔比、初始pH值及胶凝温度对(Na0.5Bi0.5)TiO3凝胶体系溶胶-凝胶形成过程影响的研究,发现水/醇盐比R在35≤R≤60,pH在2.2~3.5,反应温度在40~60℃时,能够得到透明的溶胶;通过TG-DTA、SEM、X-ray等分析手段对(Na0.5Bi0.5)TiO3粉体进行测试,表明在650℃合成1h可以得到单一钙钛矿(Na0.5Bi0.5)TiO3晶体;采用TEM对(Na0.5Bi0.5)TiO3干凝胶粉体分析其粒径大小约为10nm。     

CeO2、Sb2O3掺杂(Na0.88K0.12)0.5Bi0.5TiO3无铅陶瓷的压电性能研究

采用传统陶瓷的制备方法制备了CeO2(0～1.0wt%)和Sb2O3(0～0.6wt%)掺杂的(Na0.88K0.12)0.5Bi0.5TiO3无铅压电陶瓷。运用XRD技术研究了样品的晶体结构,测试并分析了样品的介电、压电性能以及谐振频率温度系数。结果表明:所有组成均呈三方结构的钙钛矿型固溶体特征。在适当掺杂剂用量范围内,压电陶瓷的压电常数、介电常数和介电损耗升高,而平面机电耦合系数降低。CeO2和Sb2O3掺杂均改善了(Na0.88K0.12)0.5Bi0.5TiO3压电陶瓷频率温度稳定性。     

Na0.5Bi0.5TiO3基无铅压电陶瓷研究与应用的新进展

综述了钙钛矿结构的Na0.5Bi0.5TiO3(简称BNT)基无铅压电陶瓷的研究现状,并与其它无铅基压电陶瓷进行了对比.列举了近年来BNT 基压电陶瓷的新发展和热门体系,结合笔者承担的相关研究工作内容,总结和指出了BNT基无铅压电陶瓷新的研究思路和相关方向.     

(1-x)(Bi1/2Na1/2)0.900Ba0.088Sr0.012TiO3-x(Bi1/2K1/2)TiO3无铅压电陶瓷的电学和力学性能

利用常规烧结方法制备出了多种A位离子掺杂的钛酸铋纳[(Bi1/2Na1/2)TiO3,BNT]无铅压电陶瓷.对BNT基陶瓷的电学性能和力学性能进行了研究.在(1-x)(Bi1/2Na1/2)0.900Ba0.088Sr0.012TiO3-x(Bi1/2K1/2)TiO3(x=0-0.14)陶瓷体系中,当x=0.10时,可获得最大压电常数(168pC/N).在1 kHz,这种陶瓷的介电常数、介电损耗和平面机电耦合系数分别为1 221,0.0361和0.2281.Curie温度随x的增加先增加,当x=0.12时,达到最高值(300℃),随后,当x值进一步增加,Curie温度降低.该种无铅压电陶瓷的Vickers硬度和断裂韧性分别为5.0GPa和2.0MP·m1/2,均高于Pb(Zr,Ti)O3陶瓷.     

准同型相界附近(Na1-xKx)0.5Bi0.5TiO3的制备及性能研究

利用固相法制备了（Na1-xKx）0.5Bi0.5TiO3系压电陶瓷，XRD分析表明所得陶瓷样品为纯的钙钛矿结构，其准同型相界在x=0．18～0．22之间；电子探针显微分析显示所做陶瓷样品晶粒发育良好，具有规则的外形和明显的晶界；实验所得陶瓷样品损耗tanδ最大不超过5％，最好的压电常数d33=153 pC／N，平面机电耦合系数kp=0．299，它们分别出现在x=0．22和0．20处。     

La3+掺杂钛酸铋钠基无铅陶瓷的压电性能与介电弛豫行为

采用冷等静压成型和密闭烧结工艺,制备了具有微晶结构的稀土离子La3+掺杂0.9TNa0.5Bi0.5TiO3-0.03K0.5Na0.5NbO3基无铅压电陶瓷体系.研究了该体系陶瓷的相结构,显微结构与介电、压电性能.结果表明:在掺杂范围内(0.015≤x≤0.105),La3+可完全固溶进陶瓷晶格形成单一的钙钛矿相.采用等静压成型工艺可明显改善陶瓷的显微结构,使晶粒细化,进而提高材料的压电性能.该陶瓷具有弥散相变和频率色散特征,为典型的弛豫型铁电体.随着La3+掺杂量的增加,材料的铁电-反铁电相变温度下降,Curie温度提高,相对介电常数、介电损耗和压电常数逐渐减小,弛豫特征愈明显.     

Effects of BiMO3 on dielectric,ferroelectric, and piezoelectric properties of perovskite lead‐free piezoelectric BaTiO3–(Bi0.5Na0.5)TiO3 ceramics

New lead‐free piezoelectric ceramics of 0.9BaTiO₃–(0.1?x)(Bi_0.5Na_0.5)TiO₃–xBiMO₃, M=Al and Ga, where x=0.00‐0.10, were fabricated by the solid‐state reaction technique. The effect of BiMO₃ contents on the perovskite structure, phase transition, and dielectric, ferroelectric, and piezoelectric properties was investigated. X‐ray diffraction patterns showed that the ceramics exhibit a monophasic perovskite phase up to x=0.06, suggesting stabilized perovskite structures with B‐site aliovalent substitutions. Compositional‐dependent phase transitions were observed from tetragonal to pseudo‐cubic phase with increasing BiMO₃ amounts. Al³⁺ ions were found to stabilize the transition temperature of the ceramics, while significantly decreasing transition temperature, and a change in the dielectric peak were found with an increasing amount of Ga³⁺. Regarding Al³⁺ substitution, the remanent polarization (P_r) values were found to decrease slightly with the Al³⁺ amount. With regard to Ga³⁺ substitution, P_r values decreased with the Ga³⁺ amount up to 0.06 and then increased slightly. The ceramics became softer with a higher degree of substitution according to the lower coercive field (E_c), when compared with 0.9BaTiO₃–0.1(Bi_0.5Na_0.5)TiO₃ ceramics. Ceramics with a lower degree of substitution and tetragonal phase showed butterfly strain loops that correlated with normal ferroelectric behavior.     

Thermally‐induced phase transformations in Na0.5Bi0.5TiO3–KNbO3 ceramics

The structures and functional properties of Na_0.5Bi_0.5TiO₃–xKNbO₃ (NBT‐xKN) solid solutions, with x in the range from 0.01 to 0.09, were investigated using a combination of high‐resolution synchrotron X‐ray powder diffraction (SXPD) and ferroelectric property measurements. For low KN contents, an irreversible transformation from cubic to rhombohedral phases was observed after the application of a high electric field, indicating that the polar nanoregions (PNRs) in the unpoled state can be transformed into metastable long‐range ordered ferroelectric domains in the poled state. In contrast, the near‐cubic phase of the unpoled ceramics was found to be remarkably stable and was retained on cooling to a temperature of ?175°C. Upon heating, the field‐induced metastable ferroelectric rhombohedral phase transformed back to the nanopolar cubic state at the structural transformation temperature, T_ST, which was determined as approximately 225°C and 125°C for KN contents of 3% and 5% respectively. For the field‐induced rhombohedral phase in the poled specimens, the pseudo‐cubic lattice parameter, a_p, exhibited an anomalous reduction while the inter‐axial angle increased towards a value of 90° on heating, resulting in an overall increase in volume. The observed structural changes were correlated with the results of temperature‐dependent dielectric, ferroelectric and depolarization measurements, enabling the construction of a phase diagram to define the stable regions of the different ferroelectric phases as a function of composition and temperature.