Seismic Response of Multiple Span Steel Bridges in Central and Southeastern United States. II: Retrofitted

Part I of this two-part paper evaluated the seismic response of typical multispan simply supported (MSSS) and multispan continuous steel girder bridges in the central and southeastern United States. The results showed that the bridges were vulnerable to damage resulting from impact between decks, and large ductility demands on nonductile columns. Furthermore, fixed and expansion bearings were likely to fail during strong ground motion. In this paper, several retrofit measures to improve the seismic performance of typical multispan simply supported and multispan continuous steel girder bridges are evaluated, including the use of elastomeric bearings, lead-rubber bearings, and restrainer cables. It is determined that lead-rubber bearings are the most effective retrofit measure for reducing the seismic vulnerability of typical bridges. While isolation provided by elastomeric bearings limits the forces into the columns, the added flexibility results in pounding between decks in the MSSS steel girder bridges. Restrainer cables, which are becoming a common retrofit measure, are effective in reducing the hinge opening in MSSS bridges with steel bearings. However, when used with elastomeric bearings, the restrainer cables negate the isolation effect of the bearings.     

Seismic Fragility of Continuous Steel Highway Bridges in New York State

This paper presents the results of an analytical seismic fragility analysis of a typical steel highway bridge in New York State. The structural type and topological layout of this multispan I-girder bridge have been identified to be most typical of continuous bridges in New York State. The structural details of the bridge are designed as per New York State bridge design guidelines. Uncertainties associated with the estimation of material strength, bridge mass, friction coefficient of expansion bearings, and expansion-joint gap size are considered. To account for the uncertainties related to the bridge structural properties and earthquake characteristics, ten statistical bridge samples are established using the Latin Hypercube sampling and restricted pairing approach, and 100 ground motions are simulated numerically. The uncertainties of capacity and demand are estimated simultaneously by using the ratios of demands to capacities at different limit states to construct seismic fragility curves as a function of peak ground acceleration and fragility surfaces as a function of moment magnitude and epicentral distance for individual components using nonlinear and multivariate regressions. It has been observed that nonlinear and multivariate regressions show better fit to bridge response data than linear regression conventionally used. To account for seismic risk from multiple failure modes, second-order reliability yields narrower bounds than the commonly used first-order reliability method. The fragility curves and surfaces obtained from this analysis demonstrate that bridges in New York State have reasonably low likelihood of collapse during expected earthquakes.     

Implications of Design Assumptions on Capacity Estimates and Demand Predictions of Multispan Curved Bridges

The paper presents a detailed seismic performance assessment of a complex bridge designed as a reference application of modern codes for the Federal Highway Administration. The assessment utilizes state-of-the-art assessment tools and response metrics. The impact of design assumptions on the capacity estimates and demand predictions of the multispan curved bridge is investigated. The level of attention to detail is significantly higher than can be achieved in a mass parametric study of a population of bridges. The objective of in-depth assessment is achieved through investigation of the bridge using two models. The first represents the bridge as designed (including features assumed in the design process) while the second represents the bridge as built (actual expected characteristics). Three-dimensional detailed dynamic response simulations of the investigated bridge, including soil-structure interaction, are undertaken. The behavior of the as-designed bridge is investigated using two different analytical platforms for elastic and inelastic analysis, for the purposes of verification. A third idealization is adopted to investigate the as-built bridge’s behavior by realistically modeling bridge bearings, structural gaps, and materials. A comprehensive list of local and global, action and deformation performance indicators, including bearing slippage and inter-segment collision, are selected to monitor the response to earthquake ground motion. The comparative study has indicated that the lateral capacity and dynamic characteristics of the as-designed bridge are significantly different from the as-built bridge’s behavior. The potential of pushover analysis in identifying structural deficiencies, estimating capacities, and providing insight into the pertinent limit state criteria is demonstrated. Comparison of seismic demand with available capacity shows that seemingly conservative design assumptions, such as ignoring friction at the bearings, may lead to an erroneous and potentially nonconservative response expectation. The recommendations assist be given to design engineers seeking to achieve realistic predictions of seismic behavior and thus contribute to uncertainty reduction in the ensuing design.     

Seismic Performance Assessment of Simply Supported and Continuous Multispan Concrete Girder Highway Bridges

Seismic evaluations of typical concrete girder bridges are conducted for both a multispan simply supported and a multispan continuous girder bridge common to the Central and Southeastern United States. These evaluations are performed for an approximate hazard level of 2% in 50?years by performing nonlinear time history analyses on three-dimensional analytical models. The results show significant vulnerabilities in the reinforced concrete columns, the abutments, and also in unseating of the girders. In general, the longitudinal loading of the bridges results in larger demands than the transverse loading. However, the simply supported bridge sustains bearing deformations in the transverse direction which are on the same order as their longitudinal response. These results suggest that both longitudinal and transverse loading are significant and should be considered when performing seismic hazard analyses of these bridges.     

Effect of Side Retainers on Seismic Response of Bridges with Elastomeric Bearings

Often, to restrain the lateral displacement of elastomeric bearings in slab-girder bridges, two retainers in the form of angles or welded plates are placed on each side of the bearings, with a slight clearance to allow for longitudinal movement of the elastomer. The existence of the gap introduces nonlinearity into the seismic analysis of the structure, which is commonly ignored. In addition, by considering the gap, the elastomer’s stiffness in the transverse direction contributes to the overall stiffness of the system. This paper investigates the behavior of these retainers under earthquake forces. The retainers’ stiffness, the gap distance, and the period of the bridge are used as variable parameters. It is shown that the seismic demand on retainers is nonlinear in nature and depends on the frequency content of the input motion. It is also proved that ignoring the gap in the seismic analysis model can lead to lower seismic demands on the retainers and substructure. Design recommendations are given for bridges with such retainers.     

Seismic Modeling of Skewed Bridges with Elastomeric Bearings and Side Retainers

Elastomeric expansion bearings are often restrained laterally by retainers on each side. The retainers are in the form of a concrete shear block, rolled steel angles, or welded plates. To allow for longitudinal temperature movements, the retainers are placed with a slight clearance (gap) from the elastomer. The gap introduces nonlinearity in the seismic analysis of the bridge and, therefore, is often ignored by designers for the sake of simplicity. This paper compares the seismic response of straight and skewed slab-girder single-span bridges under the conditions of zero gap and standard gap for the retainers. Nonlinear time-history analysis is employed to measure the seismic demand on retainers, elastomers, and pinned bearings in each case. The stiffness of end-diaphragms and elastomeric bearings is included in the analysis. It is shown that these relationships are nonlinear in nature and depend on the frequency content of the input motion. It is also proved that ignoring the nonlinearity in the seismic bridge model can lead to erroneous results that are unsafe to use.     

Experimental Study of the XY-Friction Pendulum Bearing for Bridge Applications

The XY-friction pendulum (XY-FP) bearing is a modified Friction Pendulum (Earthquake Protection Systems, Inc., Vallejo, Calif.) bearing that consists of two perpendicular steel rails with opposing concave surfaces and a connector. The connector resists tensile forces, provides for independent sliding in the two principal directions of the isolators, and ideally, permits unhindered rotation about its vertical axis. Experimental studies on an XY-FP seismically isolated truss-bridge model were undertaken to study response under tridirectional excitations and to evaluate the use of XY-FP bearings for bridges. A truss bridge model was tested on a pair of earthquake simulators using acceleration orbits and near-field earthquake histories. The experimental results demonstrated the effectiveness of the XY-FP bearings as an uplift-prevention isolation system: the XY-FP bearings simultaneously resisted significant tensile loads and functioned as seismic isolators. The bidirectional horizontal response of the small-scale XY-FP isolation system was coupled due to the internal construction of the small-scale connectors that joined the two rails of each XY-FP bearing and the limited free-to-rotate capacity of the XY-FP bearings due to misalignment of the isolators during installation.     

Effects of Pier and Deck Flexibility on the Seismic Response of Isolated Bridges

The seismic response of bridges isolated by elastomeric bearings and the sliding system is investigated under two horizontal components of real earthquake ground motions. The selected bridges consist of multispan continuous deck supported on the piers and abutments. Three different mathematical models of the isolated bridge are considered for the analytical seismic response by considering and ignoring the flexibility of the deck and piers. The mathematical formulation for seismic response analysis of various mathematical models of the bridges isolated by different isolation systems is presented. The accuracy and computational efficiency of various mathematical models of isolated bridges is investigated by comparing their responses under different system parameters and earthquake ground motions. The important parameters selected are the flexibility of deck, piers, and isolation systems. There was significant difference in the computational time required for different models, but it was observed that the seismic response of the bridges obtained from different equivalent mathematical models is quite comparable even for an unsymmetrical bridge. Thus, the earthquake response of a seismically isolated bridge can be effectively obtained by modeling it as a single-degree-of-freedom system (i.e., considering the piers and deck as rigid) supported on an isolation system in two horizontal directions.     

Efficient Longitudinal Seismic Fragility Assessment of a Multispan Continuous Steel Bridge on Liquefiable Soils

The increased failure potential of aging U.S. highway bridges and their susceptibility to damage during extreme events necessitates the development of efficient reliability assessment tools to prioritize maintenance and rehabilitation interventions. Reliability communication tools become even more important when considering complex phenomena such as soil liquefaction under seismic hazards. Currently, two approaches are widely used for bridge reliability estimation under soil failure conditions via fragility curves: liquefaction multipliers and full-scale two- or three-dimensional bridge-soil-foundation models. This paper offers a computationally economical yet adequate approach that links nonlinear finite-element models of a three-dimensional bridge system with a two-dimensional soil domain and a one-dimensional set of p-y springs into a coupled bridge-soil-foundation (CBSF) system. A multispan continuous steel girder bridge typical of the central and eastern United States along with heterogeneous liquefiable soil profiles is used within a statistical sampling scheme to illustrate the effects of soil failure and uncertainty propagation on the fragility of CBSF system components. In general, the fragility of rocker bearings, piles, embankment soil, and the probability of unseating increases with liquefaction, while that of commonly monitored components, such as columns, depends on the type of soil overlying the liquefiable sands. This component response dependence on soil failure supports the use of reliability assessment frameworks that are efficient for regional applications by relying on simplified but accepted geotechnical methods to capture complex soil liquefaction effects.     

Full-Scale Tests of Seismic Cable Restrainer Retrofits for Simply Supported Bridges

Many parts of the central and southeastern United States have recently begun initiating seismic retrofit programs for bridges on major interstate highways. One of the most common retrofit strategies is to provide cable restrainers at the intermediate hinges and abutments in order to reduce the likelihood of collapse due to unseating. To evaluate the force-displacement behavior of the cable restrainer retrofits, a full-scale bridge setup was constructed based on an existing multispan, simply supported steel girder bridge in Tennessee, that has been considered for seismic retrofit using cable restrainers. Seismic cable restrainers were connected to the bridge pier using steel bent plates, angles, and undercut anchors embedded in the concrete as specified by typical bridge retrofit plans. The full-scale bridge model was subjected to monotonic loading to test the capacity of the cable restrainer system and to determine the modes of failure. The results showed that the primary modes of failure are in the connection elements of the pier and girders, and they occur at force levels much lower than the strength of the cable. Modifications to the connection elements were designed and tested. The new connections resulted in a higher strength and deformation capacity of the cable restrainer assembly.     

Site specific probabilistic seismic hazard analysis at Dubai Creek on the west coast of UAE

A probabilistic seismic hazard analysis (PSHA) was conducted to establish the hazard spectra for a site located at Dubai Creek on the west coast of the United Arab Emirates (UAE). The PSHA considered all the seismogenic sources that affect the site, including plate boundaries such as the Makran subduction zone, the Zagros fold-thrust region and the transition fault system between them; and local crustal faults in UAE. PSHA indicated that local faults dominate the hazard. The peak ground acceleration (PGA) for the 475-year return period spectrum is 0.17 g and 0.33 g for the 2,475-year return period spectrum. The hazard spectra are then employed to establish rock ground motions using the spectral matching technique.     

Seismic Vulnerability and Mitigation during Construction of Cable-Stayed Bridges

The implications of earthquake loading during balanced cantilever construction of a cable-stayed bridge are examined. Finite-element models of a cable-stayed bridge were developed and multiple ground motion time history records were used to study the seismic response at the base of the towers for six stages of balanced cantilever construction. Probabilistic seismic hazard relationships were used to relate ground motions to bridge responses. The results show that there can be a high probability of having seismic responses (forces/moments) in a partially completed bridge that exceed, often by a substantial margin, the 10%/50-year design level (0.21% per annum) for the full bridge. The maximum probability of exceedance per annum was found to be 20%. This occurs because during balanced-cantilever construction the structure is in a particularly precarious and vulnerable state. The efficacy of a seismic mitigation strategy based on the use of tie-down cables intended for aerodynamic stability during construction was investigated. This strategy was successful in reducing some of the seismic vulnerabilities so that probabilities of exceedance during construction dropped to below 1% per annum. Although applied to only one cable-stayed bridge, the same approach can be used for construction-stage vulnerability analysis of other long-span bridges.     

Seismic Design of Lifeline Bridge using Hybrid Seismic Isolation

This paper presents the merits of a hybrid seismic isolation system used for the seismic design of a major bridge. The bridge is analyzed for two different arrangements of seismic isolation systems. The first arrangement consists of friction pendulum bearings at all substructure locations; the other incorporates a hybrid system where laminated elastomeric bearings are used at the abutments and friction pendulum bearings at the piers. Analysis results have demonstrated that the hybrid seismic isolation system provided a structure with a fundamental period long enough to attract smaller seismic forces, while controlling the magnitude of isolation bearings displacements. It also provided a more uniform distribution of seismic forces among substructure elements. As a result, higher seismic forces on the piers were reduced, allowing for a more economical design of substructures. The hybrid seismic isolation system helped to control the wind-induced vibrations and reduced the sizes of the isolation bearings.     

Investigation on the Impact of Seasonally Frozen Soil on Seismic Response of Bridge Columns

This paper presents the development of numerical models that investigated the seismic response of a simple two span prototype bridge system during warm and frozen temperatures. Models from both temperature conditions were subjected to a range of seismic intensities to examine the effect of seasonal freezing on the response of the system. Stiffness characteristics were defined using cyclic models of a bridge pier that were previously developed and validated using results from an experimental program on identical full-scale column-foundation units, which were tested during the summer and winter months. Dynamic characteristics of the seismic models were defined using approaches found in the literature. Frozen conditions increased the maximum bending moment and shear force demands for all seismic intensities, with nonlinearity in the column/foundation reducing the difference between the peak responses at higher intensities. At the depth of maximum foundation shear for the frozen model, demand was three times higher than the unfrozen for the 500-year return period and twice during the 2,500-year event. This is significant as one will assume shear is not critical at this location if the effects of frozen conditions are ignored. Apart from the smallest intensity event, increased peak lateral displacements were developed by the warm model down the length of the column and foundation. However, the displacement demand to capacity ratio was higher at the column top for the frozen model, exceeding the capacity during the 2,500-year return period event.     

Dynamic Behavior of Steel Deck Tension-Tied Arch Bridges to Seismic Excitation

The dynamic responses of steel deck, tension-tied, arch bridges subjected to earthquake excitations were investigated. The 620 ft (189 m) Birmingham Bridge, located in Pittsburgh, was selected as an analytical model for the study. The bridge has a single deck tension-tied arch span and is supported by two bridge piers, which in turn are supported by the pile foundations. Due to the complex configuration of the deck system, two analytical models were considered to represent the bridge deck system. Using the normal mode method, seismic responses were calculated for two bridge models and the results were compared with each other. Three orthogonal records of the El Centro 1940 earthquake were used as input for the seismic response analysis. The modal contributions were also checked in order to obtain a reasonable representation of the response and to minimize computational cost. Displacements and stresses at the panel points of the bridge are calculated and presented in graphical form.     

Influence of Inelastic Tower Links on Cable-Supported Bridge Response

A new concept for bridge tower designs in seismic zones incorporates sacrificial link schemes that enable the tower shafts to remain elastic under large seismic excitation. In order to study the influence of inelastic tower links on the seismic response of cable-supported bridges, global seismic time history analyses were performed on models of the new San Francisco-Oakland Bay Bridge East Span self-anchored suspension bridge (SASB) and a cable-stayed bridge (CSB) alternative. The addition of inelastic links to the signature tower improved the behavior of both structures. The tower and overall bridge demands were reduced, including the tower drift and moments as well as the suspension cable, cable stay, and superstructure drifts and axial loads. The inelastic tower links protected the SASB and CSB tower shafts from nonlinear behavior under the 1,500-year Safety Evaluation Earthquake (SEE) event as well as a 2,500-year event. When the inelastic tower links were removed, the SASB tower shafts yielded under the SEE. It was shown that the inelastic tower links could be used to tune the dynamic response of bridge towers in regions of high seismicity.     

Wave Passage and Ground Motion Incoherency Effects on Seismic Response of an Extended Bridge

This paper investigates the implications of ground motion spatial variability on the seismic response of an extended highway bridge. An existing 59-span, 2,164-meter bridge with several bearing types and irregularity features was selected as a reference structure. The bridge is located in the New Madrid Seismic Zone and supported on thick layers of soil deposits. Site-specific bedrock input ground motions were selected based on a refined probabilistic seismic hazard analysis of the bridge site. Wave passage and ground motion incoherency effects were accounted for after propagating the bedrock records to the ground surface. The results obtained from inelastic response-history analyses confirm the significant impact of wave passage and ground motion incoherency on the seismic behavior of the bridge. The amplification in seismic demands exceeds 150%, whereas the maximum suppression of these demands is less than 50%. The irregular and unpredictable changes in structural response owing to asynchronous earthquake records necessitate in-depth seismic assessment of major highway bridges with advanced modeling techniques to realistically capture their complex seismic response.     

Extreme Thermal Loading on Steel Bridges in Tropical Region

In the design of highway bridges, it is important to consider the thermal stresses induced by the nonlinear temperature distribution in the bridge deck irrespective of their spans. To cope with this, design temperature profiles are provided by many bridge design codes, which are normally based on extensive research on the thermal behavior of bridges. This paper presents the results of a comprehensive investigation on the thermal behavior of steel bridges carried out in Hong Kong. A method for predicting bridge temperatures from given meteorological conditions is briefly discussed. The theoretical results have been validated by temperature measurements on experimental models mounted on the roof of a building as well as on an existing steel bridge. Both the theoretical and field results confirm the validity of the one-dimensional heat transfer model on which most design codes are based. Values of design thermal loading for a 50-year return period are determined from the statistics of extremes over 40 years of meteorological information in Hong Kong. The design temperature profiles for various types of steel bridge deck with different thickness of bituminous surfacing are developed.