共查询到20条相似文献,搜索用时 93 毫秒
2.
介绍了天钢棒材四切分轧制技术,通过分析三切分与四切分轧制工艺,对螺纹钢成品质量的影响,重新优化设计中轧机组侧压孔型,解决了四切分轧制线差大、工序能力不足的问题,实现了四切分轧制生产稳定;通过优化中轧K5孔型,使侧压孔型K5、预切分孔型K4、切分孔型K3,四线切分轧制中最为关键的3个道次,得到合理匹配,外形尺寸满足国标与用户的要求。K5孔型通过优化设计后,提高了四切分轧制工艺工序能力,螺纹钢力学性能和使用性能得到了有效保障。 相似文献
3.
介绍了河钢宣钢Φ14 mm螺纹钢由三切分改为四切分工艺的开发生产过程.新工艺中,粗中轧孔型与现有孔型系统共用,精轧机组采用预切分—切分的孔型系统,通过切分孔型和切分导卫的共同作用,完成轧件"一分三,三变四"四线切分过程.产品开发一次成功,其几何尺寸、表面质量和力学性能等各项质量指标均符合国标GB/T1499.2-201... 相似文献
4.
5.
6.
7.
介绍了锚杆用热轧带螺纹肋钢筋的孔型设计与开发过程。根据冶金标准和使用要求,设计了合理的产品的化学成分、生产工艺流程、K_0和K_1架次孔型、横肋铣槽间距、特定轧辊直径等参数,从而实现了产品外形尺寸、表面质量、力学性能等达到用户要求。 相似文献
8.
介绍了PSB930预应力混凝土用螺纹钢筋中化学成分设计、孔型设计、控制冷却工艺等研制开发过程.试制结果表明,钢筋的外形尺寸、表面质量和力学性能均满足标准要求. 相似文献
9.
10.
11.
12.
13.
通过对中型轧钢厂螺纹钢负公差生产工艺的优化及生产过程的控制,生产出符合国家标准要求的螺纹钢;螺纹钢的负公差率得到提高。 相似文献
14.
Metallurgist - The paper discusses the use of a secondary smelting technology for reinforcing steel (rebar) production at Baku Steel Company, LLC, noting the feasibility of adding metallized... 相似文献
15.
对英标BS4 4 4 9- 97与国标GB14 99进行了对比 ,并依此对唐山钢铁公司生产的可行性进行了研究 ,探讨了生产英标中 4 6 0B级钢筋的注意事项。 相似文献
16.
主要介绍了水钢铌微合金化HRB400钢筋开发工艺及实施情况,通过对铌微合金化HRB400钢筋试制,初步掌握Nb合金的强化机理,确保该钢种的正常生产,节约公司生产成本。 相似文献
17.
铌微合金化HRB400热轧带肋钢筋的研制 总被引:2,自引:0,他引:2
介绍南钢采用铌微合金化技术研制开发HRB400热轧带肋钢筋系列产品的工艺和产品性能情况。分析了轧制工艺对钢筋力学性能的影响,阐述了控制轧制温度对改善加铌HRB400钢筋力学性能的重要性。 相似文献
18.
HRB400热轧带肋钢筋的性能分析 总被引:1,自引:0,他引:1
为了扩大经营品种,2002年3月韶钢用大电炉生产工艺试制与开发了HRB400Ⅲ级钢筋,本文重点对成品的性能和V微合金化的强化机理进行了分析,分析结果表明,试制的HRB400钢筋性能符合GB1499-1998标准要求,并同时满足二级抗震钢筋的性能要求,生产HRB400钢筋比生产HRB335钢筋可增加销售利润约90元/t。 相似文献
19.
The flexural performance of reinforced concrete-filled glass-fiber reinforced polymer (GFRP) tubes (CFFTs) has been investigated using seven specimens, 220?mm in diameter and 2.43?m long. Specimens were reinforced with either steel, GFRP, or carbon–fiber reinforced polymer (FRP) rebar of various sizes. Prefabricated GFRP tubes with most of the fibers oriented in the hoop direction were used in five specimens. One control specimen included conventional steel spirals of stiffness comparable to the GFRP tube and the other had no transverse reinforcement. Test results have shown that CFFT beams performed substantially better than beams with a steel spiral. Unlike CFFTs with FRP rebar, CFFTs with steel rebar failed in a sequential progressive manner, leading to considerable ductility. An analytical model capable of predicting the full response of reinforced CFFT beams, including the sequential progressive failure, has been developed, verified, and used in a parametric study. It is shown that laminate structure of the tube affects the behavior, only after yielding of the steel rebar. Steel reinforcement ratio significantly affects stiffness and strength, whereas concrete strength has an insignificant effect on the overall performance. 相似文献