This paper presents a designing of dual-coated miniaturized metamaterial inspired quad band antenna for wireless standards with gain enhancement. Proposed design has compactness in size with electrical dimension of 0.239?×?0.351?×?0.0127 λ (30?×?44?×?1.6 mm3), at lower frequency of 2.39 GHz. The antenna consist a double printed slotted hexagonal shape radiating section with implementation of metamaterial rectangular split ring resonator. Antenna achieve quad bands for wireless standards WLAN (2.4/5.8 GHz), WiMAX (3.5 GHz), IEEE 802.11P (WAVE-5.9 GHz), ITU assigned X bands (7.25–7.75, 7.9–8.4 GHz) and satellite communication systems operating bands (C-band: 7.4–8.9 GHz and X-band: 8–10 GHz for satellite TV). An acceptable gain, stable radiation characteristics and good impedance matching are observed at all the resonant frequencies of the proposed structure. By application of proposed frequency selective surface an average enhancement of gain is about 4–5 dB over the operating band. Antenna fabricated and tested represent good agreement between the simulated and measured results.
相似文献This paper presents the design and analysis of IoT (Internet of Things) controlled frequency reconfigurable triple-band antenna for WiMAX, ISM (Industrial, Scientific, and Medical) band, and X band microwave sensing applications. The designed antenna is constructed on polyimide substrate with a limited ground plane with compact dimensions of 27.5?×?8?×?0.6 mm3. The fabricated antenna is sensing the microwave signals that fall under WiMAX, ISM, & WLAN, and X band with a tunable frequency range of 3.2–3.9, 5.1–6.5, and 8.2–12 GHz, respectively. The operating frequency bands can be tuned by PIN diodes and which will be controlled by using the IoT-based NodeMCU module. The designed antenna resonates at 3.5, 5.9, and 8.45 GHz when the PIN diodes are in ON state and resonating at 3.79, 5.8, and 10.48 GHz when PIN diodes are in OFF state. The proposed antenna has bidirectional radiation at upper-frequency bands and unidirectional at lower frequency bands with gain ranging from 2.2 to 3.25 dB. The proposed frequency reconfigurable triple-band antenna has a more than 90% radiation efficiency at all the operating frequencies in the ON state. A good similarity between the measured (Antenna measurement setup with Vector Network Analyzer) and simulated results (CST Microwave Studio) is observed. In the real-time environment, the proposed reconfigurable antenna is tested by the CDAC (Centre for Development of Advanced Computing, India) Cmote unit found its suitability to microwave sensing applications.
相似文献A small and compact monopole antenna of dimensions 25?×?18?×?1.6 mm3 is presented for UWB communications. The proposed design consists of two kite shaped radiators in coalesced form and a tapered slotted ground plane for the UWB characteristics. The parametric study of the patch and the modified ground plane is made and the measured impedance bandwidth of 14.2 GHz (2.8–17 GHz) is achieved. The measured antenna gain varies from 2.28 to 5.0 dBi for the entire frequency band of application. Group delay, signal analysis and antenna isolation |S21| are also studied at different orientations of the antenna and found to be quite satisfactory to meet the requirements for UWB applications. The co- and cross-polarization patterns are also calculated for E and H-planes, and compared with the measured results. Antenna simulation and optimization are performed using CST Microwave Studio and design is fabricated and measured for the validation of the results.
相似文献Herein, a Conductor Backed Co-Planar Waveguide fed, compact, slotted Multiple–Input–Multiple–Output or MIMO antenna having Super Wideband (SWB) response and tunable band-notching feature is presented. In addition, an improved method for cut-off frequency prediction of the antenna is formulated. A super wide frequency response from 01.21 to 34.0 GHz and notches at Wireless Local Area Networks or WLAN bands (04.92–05.83 GHz) and Worldwide Inter-operability for Microwave Access or WiMAX bands (03.30 GHz–03.70 GHz) are obtained. By fine tuning the dimensions of the Split Ring Resonator Structure introduced in the radiating element, band-notched characteristics centered at 05.50 GHz WLAN band is obtained. A second band notch having centre frequency at 03.50 GHz for the WiMAX band is obtained by the introduction of a Spiral Microstrip Defected Structure in the feeding segment. The antenna is 20?×?36?×?1 mm3 in dimension. Acceptable gain all through the functional bandwidth, excepting the notched bands makes the MIMO antenna a novel contender for SWB operations particularly for Wireless Personal Communications.
相似文献A compact wideband multi frequency microstrip antenna for wireless communication is proposed in this paper. The antenna is designed by introducing meandered slot on the patch and a pair of spur lines along the triangular notch on the finite ground plane. The overall size of the fabricated antenna is very small and low profile as the total dimension is 20?×?16 mm2. The proposed antenna operates at 3.7 GHz, 4.27 GHz and 5.1 GHz which may be suitable for WiMAX and WLAN applications. In addition with multi frequency operation a wide bandwidth (VSWR?≤?2) has been achieved from 6 to 13.7 GHz i.e. 78.2% bandwidth of center frequency, which is suitable for X-band communication and ITU band applications. The meandered slot on the patch causes multi frequency operation of the antenna with 60% compactness and the spur line along with triangular notch on finite ground plane cause bandwidth enhancement.
相似文献In this paper, an UWB micro-strip antenna design has been proposed which is suitable for future cognitive radio applications. The geometry of proposed antenna is composed of two semi-circles with their interior modified in order to achieve higher impedance bandwidth. The semi-etched ground provides further bandwidth enhancement. The proposed antenna is fabricated on an inexpensive dielectric substrate FR-4 with relative permittivity of 4.4 and thickness of 1.6 mm. The overall dimensions of UWB antenna are 60?×?60?×?1.6 mm and have a bandwidth of 5.7 GHz. The designed antenna covers the most commonly used wireless communication bands such as DCS-1800, ISM bands, GPS, Wi-MAX, WLAN, 3G, 4G, etc. The design process and the variations in antenna’s performance due to different parameters has been discussed. The design and simulation of the antenna are carried out in the Ansys Electronic Desktop HFSS. The measured results are in good agreement with simulated results and design theory which shows that the proposed antenna is good candidate for the UWB applications.
相似文献A compact multiband cavity-backed substrate integrated waveguide (SIW) and metamaterial antenna with coplanar waveguide (CPW) feed is designed for S and Ku bands thereby providing low and high frequency applications. Designing simultaneous achievement of high gain in S band and Ku band antennas are challenging task, but the proposed antenna overcomes this limitation. The proposed antenna has a ground structure with radiating T-shaped stub opposite to the feed line and a combination of SIW and metamaterial. SIW and complementary square split ring resonator (CSSRR) are used to enhance efficiency, directivity, gain and bandwidth. The proposed antenna structure uses FR-4 epoxy as the substrate material with ?r?=?4.4 with a dimension of 40 × 40?×?1.6 mm and analyzed using ANSYS HFSS. The designed antenna resonates at three frequencies (i.e.), 4.23, 13.63 and 17.05 GHz with a gain greater than 5 dBi and efficiency greater than 80%. It is suitable for S band (ISM, WLAN, WiMax) and Ku band (radar, satellite communications) applications. The designed antenna is linearly polarized with high gain and efficiency at both the bands.
相似文献A new compact pentagonal microstrip patch antenna with slotted ground plane structure, developed for use in ultrawideband applications, is studied in this article. The proposed antenna is mainly constituted by a pentagonal shaped patch antenna, a defected ground plane structure, two stubs, and four slots to improve the bandwidth. The designed antenna has an overall dimension of 30?×?17.59?×?1.6 mm3, for WIMAX/WLAN/WiFi/HIPERLAN-2 /Bluetooth/LTE/5G applications with a very large bandwidth starting from 2.66 to 10.82 GHz (S11?<???6 dB). A parametric study of the ground plane structure was carried out to find the final and the optimal UWB antenna, and to confirm that the antenna has good performance and broader bandwidth. The proposed antenna prototype has been fabricated. The measured results indicate that the antenna has a good impedance matching. The antenna has an electrically small dimension with a good gain, a notable efficiency, and a wide impedance bandwidth, which makes this antenna an excellent candidate for ultrawideband wireless communication, microwave imaging, radar applications, and the major part of the mobile phone frequencies as well.
相似文献This paper proposes the design of three compact antennas for WiMAX, WLAN and ISM band applications. Antenna 1 consists of a monopole radiating element with an electromagnetic band gap (EBG) structured ground. By employing the EBG structure, an ultra-wide band frequency of 2.4–4.8 GHz (66.66%) is achieved. Antenna 2 is configured with an electric-LC (ELC) element, which achieved an ultra-wide band (UWB) frequency of 2.38–4.91 GHz (69.41%). Antenna 3 is integrated with ELC and EBG together, in which a UWB frequency of 2.3–5.3 GHz (78.94%) is obtained with improved impedance matching. The three antennas have omnidirectional radiation patterns which cover the ISM band at 2.4 GHz and WiMAX at 2.5/3.5 GHz over the operating bands. The radiation efficiency is?>?75% throughout the operating bands of all the antennas. In addition to the WiMAX and ISM bands, antenna 3 covers WLAN in the 5.2 GHz band. The proposed design can be applied to wireless mobile communication systems, which have the advantage of ease of fabrication and compactness.
相似文献
A new CPW fed elliptical antenna for ultra-wideband (UWB) is proposed. The novelty of this antenna are very small size and uniplanar structure, which results in easy and low cost fabrication. This antenna has elliptical slot configuration which is fed by the CPW. This elliptical slot UWB antenna is enclosed in the extended surface of ground for decreasing the chip surface area. This antenna is designed with the optimal design parameters for the UWB spectrum. The designed antenna is printed on FR4 substrate and Vector Network Analyser is used for measuring return loss. The results of measurement results are similar to simulation results. The complete chip volume of antenna is 18.3?×?23?×?1.6 mm3.
相似文献A compact rectangular microstrip-fed Ultra Wideband patch antenna with double band notched feature at Wi-Max and WLAN is offered in this paper. The designed antenna is composed of an ordinary rectangular patch antenna with a partially defective ground structure. For achieving dual notch characteristics a ‘U’ and ‘Reversed U’ slots are embedded in the radiating patch. The partial ground plane structure with U shaped slot in the middle is incorporated for achieving additional resonance and bandwidth enhancement. The proposed antenna has a measurement of 20 × 33 × 1.6 mm3. First notch created by U shaped slot at frequency 3.5 GHz is for Wi-Max (from 2.9 to 4.5 GHz) and Second notch which is generated by Reversed U shaped slots at frequency 5.4 GHz is for WLAN (from 5.49 to 6.45 GHz). The antenna covers almost complete range of Ultra Wideband (3.1–10.6 GHz). The Simulation analysis of the proposed antenna is carried out using CST-2011 simulation software. The radiation pattern of the simulated antenna is near Omnidirectional and the Gain of proposed antenna is almost stable over the range of UWB excluding notch bands.
相似文献This article presents the design and development of a compact broadband “+” shaped aperture coupled carpet fractal antenna with a defected ground structure (I shaped slot in the ground) for broadband/ultra wideband (UWB) and a multiband characteristics. The antenna has overall dimensions of 8.4 cm?×?5.5 cm?×?3.2 mm and is fed using aperture coupled feeding mechanism. It shows an impedance bandwidth (<?10 dB) of 4460 MHz from 6.93 to 11.39 GHz with fractional bandwidth of 0.48 at the center resonant frequency of 9.16 GHz. A multiband behavior is also exhibited by this antenna from 3.9–4.08 GHz, 4.8–5.06 GHz and 6.1–6.4 GHz with impedance bandwidths of 180 MHz, 260 MHz and 300 MHz respectively. It therefore supports the wireless applications of Wi-MAX (3.8–4.1 GHz), Wi-BAN/long distance radio telecommunication (4.8–5.06 GHz), wireless sensor networks (6.1–6.4 GHz), satellite (7.4–7.8 GHz) and UWB (6.9–11.03 GHz). The antenna is designed as a ‘+’ shaped patch with fractal rectangular slots cut out from it up to iterations of second order that allow the antenna to support multiband characteristics. The bandwidth at these bands is improved by using I shaped defected ground structure (DGS) and a parasitic feeding method i.e. aperture coupled feeding (Karur et al., in: ICMARS (IEEE), Jodhpur, India, pp. 266–270, 2014).The antenna has a compact structure with two layers of FR4 substrate, the ‘+’ shaped carpet fractal printed on the upper substrate layer and the lower substrate has a ground layer printed on its top and feed line on its bottom layer respectively. It shows a simulated peak gain of 4 dB at an operation frequency of 7.95 GHz. The antenna design and simulations are done using CST MWS V14. The Simulation results in terms of impedance bandwidth, smith chart, gain are presented in this article. To validate the impedance bandwidth results, the proposed carpet fractal antenna is experimentally tested using a vector network analyzer and the measured results are found to be closely matching with the simulated ones, allowing the antenna to be practically suitable for the afore mentioned wireless applications.
相似文献