Design of Compact Planar Triple Band-Notch Monopole Antenna for Ultra-wideband Applications

In this article a microstrip-fed mickey shaped monopole antenna with triple notched band characteristics for ultra-wideband applications is presented. By etching two slots in the ground plane, improved VSWR bandwidth is achieved. Mickey shape radiating patch provides 10 dB return-loss bandwidth from 3.10 to 10.60 GHz. By etching three simple C-shaped slots on the radiating patch, three existing wireless communication systems which interfere with UWB band is removed which includes WiMAX IEEE802.16 (3.30–3.80 GHz), WLAN IEEE802.11a/h/j/n (5.15–5.35, 5.25–5.35, 5.47–5.725, 5.725–5.825 GHz) and X-band downlink satellite system (7.1–7.9 GHz). Experimental results reveal that the proposed antenna exhibits desirable radiation patterns in the far field, resulting omnidirectional like pattern in the H-plane and nearly dipole like pattern in the E-plane.     

Design of novel compact eight-element lotus shaped UWB-MIMO antenna with triple-notch characteristics on hollow substrate

The design of novel compact two-element and eight-element lotus shaped multiple-input-multiple-output (MIMO) antenna system employing pattern diversity with enhanced isolation characteristics is presented. The proposed two-element antenna system is arranged rotationally on a square-hollow substrate resulting in an eight-element MIMO antenna system employing pattern diversity. The developed eight-element MIMO antenna system resonates in the frequency range 3.1 to 14.6 GHz housing the complete UWB band with triple band-notch characteristics at 3.7–4.5 GHz (C-band satellite down link [3.7–4.2 GHz]), 5.1–5.9 GHz (WLAN) and 6.8–8.25 GHz (X-band satellite down link (7.25–7.75 GHz) and up link (7.9–8.4 GHz)) bands. The antenna system gives element-to-element isolation of more than 25 dB in the majority of the operating band with a peak gain of 6.8 dBi and a maximum 90% efficiency. The important MIMO metrics like ECC (envelope correlation coefficient), DG (diversity gain), total active reflection coefficient (TARC), channel capacity losses (CCL) and MEG (mean effective gain) are presented for both two-element and eight-element to estimate the performance the proposed antennas in multi-antenna environments. The both two- and eight-element designs are fabricated and the measured results of those are well agreed with simulation results.     

CPW-Fed UWB antenna with sharp and high rejection multiple notched bands using stub loaded meander line resonator

This paper presents a CPW-fed UWB filter-antenna with sharp and high rejection multiple band notches for band-notched UWB communication applications. The band notch operation is achieved by employing a sharp bandstop filter (BSF) with multiple reject bands using only one element meander line resonator at the bottom layer through theoretical calculations and parametric studies. The adjustment of the notched bands is successfully accomplished by loading the meander line with open ended stubs to modify the harmonic frequencies to the desired bands. The structure of the proposed BSF is simple and compact so that the proposed filter-antenna is achieved with the same size of the reference UWB antenna without an extra area. Measurement results show that the proposed filter-antenna has two notches at the WiMAX systems operating in the 5.8 GHz (5.725–5.85 GHz) and at the international telecommunication union (ITU) operating in the 8.2 GHz (8.025–8.4 GHz). Also, it has sharp rejection characteristics at the edges of the federal communication commission (FCC) band for UWB communications. The experimental measurements are in good agreement with theoretical and simulation results for the BSF and the filter-antenna. Moreover, the filter-antenna exhibits stable omnidirectional radiation patterns except at the notched bands.     

Ultra-Wideband and Uni-Directional Radiation Slot Antenna for Multi-Band Wireless Communication Applications

In this paper, a ultra-wideband slot antenna is proposed and developed for multi-band wireless communication applications. The radiating slot is fed by a microstrip line with a microstrip fork shaped tuning stub and backed by a finite metallic reflector. The frequency characteristic and radiation performance of the proposed antenna are successfully optimized and the related prototypes are fabricated and tested. The measured results show that the impedance bandwidth can cover the band from 1.85 to 6.1 GHz with return loss of better than 10 dB. The obtained patterns display a high gain and uni-directional radiation patterns within interested bands. With these features, the proposed structure is suitable for application in wireless communication systems, where a single antenna is needed to operate at multi-bands simultaneously, such as PCS (1.85–1.99 GHz), UMTS (1.92–2.17 GHz) and all WLAN bands (2.4–2.48 GHz, and IEEE802.11a WLAN applications: 5.15–5.35 and 5.725–5.825 GHz).     

具有三阻带特性的新型平面超宽带天线研究

设计了一款具有三阻带特性的紧凑型超宽带天线。该天线采用共面波导结构进行馈电且能覆盖3.05~11.05 GHz的频率范围。通过在地表面加载两个对称的L形槽可以滤除WiMAX和卫星通信系统对超宽带系统的干扰,同时5.15~5.25 GHz和5.725~5.825 GHz的WLAN系统对超宽带系统的干扰分别被加载在辐射贴片上的倒C形和馈线上的倒U形槽滤除。天线经过设计,优化和制作,并对其进行了测试。测试结果表明,该天线尺寸为23mm×30 mm,其在3.05~11.05 GHz内VSWR小于2,并在3.30~4.16,5.0~5.4和5.6~6.0 GHz处形成了三个阻带。     

一种具有三阻带和高频截止特性的超宽带天线

为了有效抑制超宽带(UWB)通信系统和窄带通信系统之间潜在的干扰,设计了一款具有三阻带特性和高频截止特性的超宽带天线。天线总尺寸为33 mm×19 mm×1 mm。该天线的辐射单元由一个椭圆形的单极子和一个倒梯形结构组成,由50的矩形微带线馈电,接地板由一个矩形和一个开槽梯形结构构成。对天线进行加工并测试。结果表明,该天线在3.3~3.6 GHz处的阻带由辐射单元上的凹形槽产生,5.15~5.35 GHz和5.725~5.825 GHz处的阻带由微带馈线两旁的U形寄生单元产生,10.8 GHz高频处的截止特性是由微带线两旁对称的凹形寄生单元共同决定的。天线的测试结果与仿真结果吻合良好。     

A Quad Band Metamaterial Miniaturized Antenna for Wireless Applications with Gain Enhancement

This paper presents a designing of dual-coated miniaturized metamaterial inspired quad band antenna for wireless standards with gain enhancement. Proposed design has compactness in size with electrical dimension of 0.239?×?0.351?×?0.0127 λ (30?×?44?×?1.6 mm³), at lower frequency of 2.39 GHz. The antenna consist a double printed slotted hexagonal shape radiating section with implementation of metamaterial rectangular split ring resonator. Antenna achieve quad bands for wireless standards WLAN (2.4/5.8 GHz), WiMAX (3.5 GHz), IEEE 802.11P (WAVE-5.9 GHz), ITU assigned X bands (7.25–7.75, 7.9–8.4 GHz) and satellite communication systems operating bands (C-band: 7.4–8.9 GHz and X-band: 8–10 GHz for satellite TV). An acceptable gain, stable radiation characteristics and good impedance matching are observed at all the resonant frequencies of the proposed structure. By application of proposed frequency selective surface an average enhancement of gain is about 4–5 dB over the operating band. Antenna fabricated and tested represent good agreement between the simulated and measured results.

     

High Diversity Gain MIMO-Antenna for UWB Application with WLAN Notch Band Characteristic Including Human Interface Devices

Wireless Personal Communications - In this paper, a UWB–MIMO antenna with the WLAN band-notch (5.1–5.85 GHz) characteristic is offered. This antenna consists of two radiated...     

A Compact Plus Shaped Carpet Fractal Antenna with an I-Shaped DGS for C-band/X-band/UWB/WIBAN applications

This article presents the design and development of a compact broadband “+” shaped aperture coupled carpet fractal antenna with a defected ground structure (I shaped slot in the ground) for broadband/ultra wideband (UWB) and a multiband characteristics. The antenna has overall dimensions of 8.4 cm?×?5.5 cm?×?3.2 mm and is fed using aperture coupled feeding mechanism. It shows an impedance bandwidth (<?10 dB) of 4460 MHz from 6.93 to 11.39 GHz with fractional bandwidth of 0.48 at the center resonant frequency of 9.16 GHz. A multiband behavior is also exhibited by this antenna from 3.9–4.08 GHz, 4.8–5.06 GHz and 6.1–6.4 GHz with impedance bandwidths of 180 MHz, 260 MHz and 300 MHz respectively. It therefore supports the wireless applications of Wi-MAX (3.8–4.1 GHz), Wi-BAN/long distance radio telecommunication (4.8–5.06 GHz), wireless sensor networks (6.1–6.4 GHz), satellite (7.4–7.8 GHz) and UWB (6.9–11.03 GHz). The antenna is designed as a ‘+’ shaped patch with fractal rectangular slots cut out from it up to iterations of second order that allow the antenna to support multiband characteristics. The bandwidth at these bands is improved by using I shaped defected ground structure (DGS) and a parasitic feeding method i.e. aperture coupled feeding (Karur et al., in: ICMARS (IEEE), Jodhpur, India, pp. 266–270, 2014).The antenna has a compact structure with two layers of FR4 substrate, the ‘+’ shaped carpet fractal printed on the upper substrate layer and the lower substrate has a ground layer printed on its top and feed line on its bottom layer respectively. It shows a simulated peak gain of 4 dB at an operation frequency of 7.95 GHz. The antenna design and simulations are done using CST MWS V14. The Simulation results in terms of impedance bandwidth, smith chart, gain are presented in this article. To validate the impedance bandwidth results, the proposed carpet fractal antenna is experimentally tested using a vector network analyzer and the measured results are found to be closely matching with the simulated ones, allowing the antenna to be practically suitable for the afore mentioned wireless applications.

     

A printed monopole ellipzoidal UWB antenna with four band rejection characteristics

An antenna design with four band rejection characteristics for UWB application is demonstrated. The proposed unique UWB antenna has shape of an embedded ellipse at top of trapezoidal patch (named as ellipzoidal), 50 Ω impedance microstrip line feed and a truncated beveled ground plane. To realize four band stop characteristics, three inverted U-shaped and a single I-shaped slots each of half guided wavelength are utilized on radiating element. The fabricated antenna has dimensions of 27 mm × 36 mm × 1.6 mm. This four band notched ellipzoidal UWB antenna has measured frequency bandwidth 2.8–14 GHz for magnitude of S₁₁ < −10 dB level. The measured ellipzoidal antenna exhibits four band rejection characteristics for magnitude of S₁₁ > −10 dB at 3.55 GHz for WiMAX band (3.26–3.9 GHz), 4.55 GHz for ARN band (4.35–5.05 GHz), 5.7 GHz for WLAN band (5.5–6.65 GHz) and 8.8 GHz for ITU-8 band (7.95–9.35 GHz). The proposed ellipzoidal UWB antenna maintains omnidirectional radiation pattern, gain, linear phase response, <1 ns group delay, and transfer function in the whole UWB operating bandwidth except at notched frequency bands.     

A novel microstrip antenna loaded with EBG and ELC for bandwidth enhancement

This paper proposes the design of three compact antennas for WiMAX, WLAN and ISM band applications. Antenna 1 consists of a monopole radiating element with an electromagnetic band gap (EBG) structured ground. By employing the EBG structure, an ultra-wide band frequency of 2.4–4.8 GHz (66.66%) is achieved. Antenna 2 is configured with an electric-LC (ELC) element, which achieved an ultra-wide band (UWB) frequency of 2.38–4.91 GHz (69.41%). Antenna 3 is integrated with ELC and EBG together, in which a UWB frequency of 2.3–5.3 GHz (78.94%) is obtained with improved impedance matching. The three antennas have omnidirectional radiation patterns which cover the ISM band at 2.4 GHz and WiMAX at 2.5/3.5 GHz over the operating bands. The radiation efficiency is?>?75% throughout the operating bands of all the antennas. In addition to the WiMAX and ISM bands, antenna 3 covers WLAN in the 5.2 GHz band. The proposed design can be applied to wireless mobile communication systems, which have the advantage of ease of fabrication and compactness.

     

E-shaped patch antennas for high-speed wireless networks

Thin, broad-band, E-shaped microstrip patch antennas (ESPAs), operating in the 5-6 GHz frequency range, are presented. They are intended for high-speed (IEEE 802.11a, 54 Mb/s) wireless computer local area networks (WLAN) and other wireless communication systems. They are suitable for WLAN adaptor cards in the PCMCIA (also known as PC) format, allowing users of current notebook computers to upgrade to this high-speed wireless standard at a low cost. Importantly, our antennas are thin enough to be accommodated in a PCMCIA card of standard 5-mm thickness, without making the antenna end thicker than the card itself. Two different closely spaced antenna pairs are also presented for diversity. A new ESPA configuration with a microstrip feed is presented for easy integration with microwave transceivers. In all cases, within the two IEEE 802.11a WLAN bands (5.15-5.35 GHz and 5.725-5.825 GHz), the reflection coefficient at the antenna input is <-10 dB and in both antenna pairs, mutual coupling between the two antennas is <-20 dB.     

具有带阻特性的宽缝隙超宽带天线研究

根据短距离无线电通信系统对超宽带天线的要求,设计制作了矩形宽缝隙超宽带(UWB)天线,并通过加载λg/4开路枝节的方法实现了超宽带天线的带阻特性,分析了天线参数对其辐射特性的影响.仿真及实验结果表明:该天线满足短距离无线电通信系统对UWB天线的要求,实现了4.5～6 GHz的带阻特性,具有稳定的增益,良好的波形保真特性...     

Design and Analysis of Triple-Band Rectangular Microstrip Antenna Loaded with Notches and Slots for Wireless Applications

In this paper, a rectangular triple-band microstrip antenna has been designed for Bluetooth application by successively loading notches and slots of different dimension in radiating patch. The conventional microstrip antenna suffers with narrow impedance bandwidth. The current work affords an alternate option to enhance the bandwidth of antenna that resonates in triple-band operation. Initially, the antenna is resonating in single-band but after loading slots, the bandwidth of microstrip antenna has been obtained 1.97% (lower band), 10.35% (middle band) and 33.16% (upper band) resonating in triple-band with three resonant frequency at 1.422 GHz (lower resonant frequency), 1.791 GHz (middle resonant frequency) and 2.467 GHz (higher resonant frequency). The suggested antenna has upper frequency band in the range of 2.045–2.858 GHz resonating at 2.467 GHz frequency and it is appropriate for Bluetooth applications (2.40–2.48 GHz) and both lower band useful for other wireless (L-band) applications. The return loss of upper band is ??34.52 dB at 2.467 GHz. The suggested microstrip antenna is directly fed by 50 ohm microstrip line feed. The suggested antenna has been designed, simulated and analyzed by IE3D simulation software.

     

Design of a Compact Hexagonal Monopole Antenna for Ultra—Wideband Applications

This paper presents two design compact hexagonal monopole antennas for ultra-wideband applications. The two antennas are fed by a single microstrip line . The Zeland IE3D version 12 is employed for analysis at the frequency band of 4 to 14 GHz which has approved as a commercial UWB band. The experimental and simulation results exhibit good agreement together for antenna 1. The proposed antenna1 is able to achieve an impedance bandwidth about 111%. The proposed antenna2 is able to achieve an impedance bandwidth about (31.58%) for lower frequency and (62.54%) for upper frequency bandwidth. A simulated frequency notched band ranging from 6.05 GHz to 7.33 GHz and a measured frequency notched band ranging from 6.22 GHz to 8.99 GHz are achieved and gives one narrow band of axial ratio (1.43%). The proposed antennas can be used in wireless ultra-wideband (UWB) communications.     

Penta-notched UWB antenna with sharp frequency edge selectivity using combination of SRR,CSRR, and DGS

This work presents penta-notched UWB antenna with sharp frequency edge selectivity using combination of SRR, CSRR, and DGS to reject the WiMAX (3.30–3.60 GHz), lower WLAN (5.150–5.350 GHz), upper WLAN (5.725–5.825 GHz), downlink of X-band satellite communication (7.0–7.40 GHz), and the uplink of X-band satellite communication (8.10–8.50 GHz) frequency bands. All these frequency bands lie within the UWB frequency spectrum. The proposed antenna is suitable for portable communication applications due to its compact dimensions. It sharply notches the existing frequency bands to mitigate the interference caused by nearby wireless communication systems within UWB frequency range. The sharp notching is achieved by the combination of complementary split ring resonators (CSRR) on the radiating semi-circular patch, split ring resonators (SRR) placed at the junction of the feedline, and a pair of defected ground structures (DGS). All notched bands can be well controlled and shifted and the equivalent lumped model of the notched bands are also developed for validation. The proposed antenna simulated, and measured results show better performance over the present state-of-the-art designs. The proposed penta-notched UWB antenna possesses better reflection coefficient, VSWR, stable gain, and small foot print. The proposed antenna has a nearly omnidirectional radiation pattern in the passbands.     

Ultra-Wideband Compact Circularly Polarized Antenna

In this research work, a circularly polarized (CP) monopole antenna is designed for Ultra-Wideband (UWB) applications. The CP UWB antenna is be made up of a reformed ring patch and ground plane. The slots and stubs are inserted in the ground to achieve CP in the UWB antenna. This antenna attained an Axial Ratio Bandwidth (ARBW) of 5 GHz (4.0–9.0 GHz) that lies in the UWB frequency range that is from 3.1 to 10.6 GHz. The designed antenna has a radiation efficiency of around 80% for the complete UWB frequency range. The CP UWB antenna is designed and fabricated using the FR4 with a compact size of 32?×?30?×?1.6 mm³ and with a peak gain of 6.8 dBi. Tested results are in good resembles with simulated ones.

     

Compact UWB monopole antenna with quadruple band notched characteristics

ABSTRACT

A compact planar Ultrawideband (UWB) monopole antenna with quadruple band notch characteristics is proposed. The proposed antenna consists of a notched rectangular radiating patch with a 50 Ω microstrip feed line, and a defected ground plane. The quadruple band notched functions are achieved by utilising two inverted U-shaped slots, a symmetrical split ring resonator pair (SSRRP) and a via hole. The fabricated antenna has a compact size of 24 mm × 30 mm × 1.6 mm with an impedance bandwidth ranging from 2.86 to 12.2 GHz for magnitude of S₁₁ < ?10 dB. The four band notched characteristics of proposed antenna are in the WiMAX (worldwide interoperability for microwave access) band (3.25–3.55 GHz), C band (3.7–4.2 GHz), WLAN (wireless local area network) band (5.2–5.9 GHz) and the downlink frequency band of X band (7–7.8 GHz) for satellite communication are obtained. The measured and simulation results of proposed antenna are in good agreement to achieve impedance matching, stable radiation patterns, constant gain and group delay over the operating bandwidth.     

频率可重构超宽带天线研究

超宽带天线和可重构天线是当今天线领域研究的热点。将可重构天线技术应用到超宽带天线设计中,讨论了频率可重构超宽带天线的设计思路。以印刷单极子椭圆天线为原型,给出了两个可重构天线的具体结构,并对天线进行了可重构带阻设计,避免与相关频段之间的干扰。仿真结果表明:重构后天线Ⅱ的低频获得了扩展,其相对尺寸的长和宽分别减小到最大工作波长的0.116倍和0.087倍,工作频段为0.174～10.9GHz,可重构阻带为5.1～5.95GHz,带宽比可高达62:1.     

Improvement of the Performance Characteristic of UWB Antenna Using a Novel Double-Layer FSSs Operating at the Ku-Band

This paper proposed a novel compact design of UWB antenna. Our design used an uni-planar EBG double-layer of FSSs to enhance performance characteristics of UWB antenna in operation frequency of 14 GHz/Ku Band. This UWB antenna occupies a compact size of 40.36?×?29.36 mm² with space/gap between the radiator patch and double-layer of FSSs is 10 mm. We used a simple rectangular truncated-corner as a radiating patch. Double-layer of FSSs consist of a lower layer of FSS that used a unit cell of rectangular loop and an upper layer of FSS applied a wire grid. Optimized size of the truncated-corner is 2?×?0.5 mm², optimal space/gap between radiator patch and double-layer of FSSs is 10 mm, and the width of a rectangular loop in the lower layer of FSS is 1.742 mm. Our proposed uni-planar EBG double-layer of FSSs based UWB antenna reaches S11 parameter of ?42.381, a ?10 dB impedance bandwidth of 1.941 GHz (12.964–14.905 GHz), and a VSWR of 1.0154 in operation frequency 14 GHz. In addition, our UWB antenna design has a high gain about 6.1 dB. Applying of uni-planar EBG double-layer of FSSs improve significantly the performance characteristic of UWB antenna.