Water barrier and physical properties of starch/decolorized hsian-tsao leaf gum films: Impact of surfactant lamination

The moisture barrier and physical properties of bilayer films prepared by lamination of starch/decolorized hsian-tsao leaf gum (dHG) and surfactant layers were investigated. It was found that the water vapor permeability (WVP) of tapioca starch/dHG film (1.31 × 10^?10 g/m s Pa) pronouncedly decreased by the aid of a surfactant layer lamination (1.36–5.25 × 10^?12 g/m s Pa). The WVP of bilayer film increased with increasing the concentration of starch/dHG in the surfactant layer, but was not significantly influenced when it was thickened. The sorption isotherms of both monolayer and bilayer films made from starch/dHG showed typical behavior of water-vapor-sensitive hydrophilic biopolymers. However, the equilibrium moisture content of the monolayer film was significantly higher than that of bilayer films when water activity (a_w) reaches 0.33. Both the tensile and puncture force of starch/dHG films did not vary significantly by laminating a surfactant layer, indicating the mechanical strength of surfactant layer is relatively weak, and this surfactant layer mainly served as a barrier for moisture. When compared to emulsion-based starch/dHG films with surfactant, the surfactant laminated starch/dHG films showed higher water barrier property, mechanical strength, and transparency.     

Mechanical and water vapor barrier properties of tapioca starch/decolorized hsian-tsao leaf gum films in the presence of plasticizer

The objectives of this research were to examine the mechanical and water vapor barrier properties of the starch/decolorized hsian-tsao leaf gum (dHG) films as a function of dHG and glycerol concentration. Edible film-forming solutions were prepared by mixing tapioca starch with dHG at different starch/dHG ratios to make a total solid content of 2%. In total, 15–40% glycerol was then added based on the dry film matter. Starch/dHG films were obtained by casting. It was found that the puncture strength, tensile strength, and modulus as well as the inverse of relaxation coefficient of starch/dHG films pronouncedly increased with increasing dHG, accompanied with a decreasing tendency in puncture deformation and tensile strain at break. Such results implied that starch interacted with dHG synergistically, resulting in the formation of a new network to improve the mechanical properties of tapioca starch/dHG films. Mechanical strengths of starch/dHG films decreased and water vapor permeability (WVP) at 75% RH increased with increasing glycerol concentration. However, the plasticizing effect of glycerol became less significant at high dHG concentration, particularly for the puncture deformation and tensile strain at break of the films. Water sorption isotherm results indicated that significant water sorption would only occur at high water activity (about 0.75), and generally became more pronounced with increasing glycerol and dHG concentration, but to a lesser extent for the latter. Dynamic mechanical analysis revealed that the major glass transition of starch/dHG films occurred at about −50 °C.     

Rheological and physical characterization of film-forming solutions and edible films from tapioca starch/decolorized hsian-tsao leaf gum

Rheological properties of the film-forming solutions of tapioca starch/decolorized hsian-tsao leaf gum (dHG) as well as the structural properties and viscoelasticity of the resulting films were characterized as a function of dHG and glycerol concentrations. As compared to film-forming solutions with tapioca starch alone, the apparent viscosity, storage modulus and loss modulus of starch/dHG film-forming solutions increased, and tan δ decreased with increasing dHG. After casting of the film-forming solutions, all starch/dHG films showed relatively low opacity values. SEM and X-ray diffraction analysis revealed that all starch/dHG films exhibited homogeneous and highly amorphous structure. The extensional creep compliance of starch/dHG films increased with increasing glycerol concentration, implying weaker mechanical strength and higher mobility of polymer chains by the plasticizing effect of glycerol. However, addition of dHG pronouncedly increased the mechanical and elastic properties of tapioca starch films as evidenced by a decrease in extensional creep compliance and retardation time. Such results implied that dHG may possibly modify the network structure of tapioca starch film.     

Effect of surfactants on water barrier and physical properties of tapioca starch/decolorized hsian-tsao leaf gum films

The objective of this research is to enhance the water barrier properties of tapioca starch/dHG edible films by incorporating sucrose ester surfactants with different HLB values. The moisture sorption isotherms, mechanical properties, microstructure and optical character of the resulting films were examined as well. It was found that the water barrier property of starch/dHG films is promoted significantly by surfactants, alongside a decreasing tendency in tensile strength and tensile strain at break. Scanning electron micrographs of the starch/dHG/surfactant composite films revealed the folded (multi-layer) microstructure in contrast to the homogeneous matrix of the control films. Starch/dHG/surfactant composite films show low opacity values. With increasing HLB value of the surfactant, the water vapor permeability and tensile strength of starch/dHG/surfactant composite films decrease. Moreover, the water vapor permeability, tensile strength, strain at break, and equilibrium moisture content of starch/dHG/surfactant composite films decrease when the surfactant content is increased, accompanied by an increasing tendency in opacity value. On the other hand, starch/dHG composite film with an emulsion of surfactant and beeswax shows a lower mechanical strength and significantly higher opacity value with less improvement in water vapor permeability.     

Characterization of a starfish gelatin film containing vanillin and its application in the packaging of crab stick

To explore the use of starfish gelatin (SFG) films as a biodegradable material, SFG from starfish was extracted and used as a film material. In addition, to provide antimicrobial activity and enhanced flavor of SFG films, vanillin was incorporated. As the concentration of vanillin increased, the tensile strength of the films increased and water vapor permeability decreased. With regard to the structural characteristics of SFG films containing vanillin, the microstructure of the SFG films was not affected by the addition of vanillin. In addition, the SFG films containing vanillin exhibited antimicrobial activity against Listeria monocytogenes. As the application of the SFG films, crab sticks were packed with SFG films containing 0.05% vanillin. During storage, the populations of L. monocytogenes inoculated on crab sticks wrapped with SFG films containing vanillin were lower than those on the control sample, suggesting that SFG films containing vanillin can be useful in active food packaging.     

Effect of Tapioca Starch/Decolorized Hsian-tsao Leaf Gum-Based Active Coatings on the Qualities of Fresh-Cut Apples

The effect of tapioca starch/decolorized hsian-tsao leaf gum (dHG)-based edible coatings with various food additives (including ascorbic acid, calcium chloride, and cinnamon oil) on the qualities and shelf life of fresh-cut “Fuji” apple pieces was investigated during the refrigerated storage. The initial respiration rate, headspace gas composition, color, texture, microbial quality, peroxidase activity, and sensory qualities were analyzed. The results were also compared to those for samples submerged in distilled water and the samples treated with 120-ppm chlorine solution widely used in the industry. It was found that ascorbic acid and cinnamon oil delayed the browning of fresh-cut apples effectively when being applied in the starch/dHG-based edible coating solutions. In combination with calcium chloride, starch/dHG coated fresh-cut apples retained satisfactory firmness. Incorporation of cinnamon oil in starch/dHG coatings significantly reduced the growth of microorganisms, respiration rate, CO₂, and ethylene production of fresh-cut apples, but these apple pieces received lower scores in overall preference during sensory evaluation. Among the starch/dHG-based active coatings studied, starch/dHG coatings with ascorbic acid and calcium chloride are suggested for fresh-cut apples, as they could enhance qualities in terms of color and firmness, and prolong the shelf life up to 5–7 days by providing reasonable microbial quality.     

Dynamic rheology of structural development in starch/decolourised hsian‐tsao leaf gum composite systems

The gelling process of decolourised hsian‐tsao leaf gum (dHG)/starch mixtures was monitored as a function of starch/gum ratio and starch type using a dynamic rheometer. It was found that the gelling process followed first‐order kinetics. At starch/gum ratios of 5:1, 4:2 and 3:3, dHG interacted with starch synergistically, resulting in a marked increase in storage modulus (G′). Both the gelling reaction rate constant and plateau G′ value as a function of starch/dHG ratio showed a maximum at a certain starch/gum ratio. These results indicated that a suitable starch/dHG ratio could facilitate the formation of a three‐dimensional network structure and the conversion of chains in the sol fraction into a gel. The maximum G′ value reached depended on the unique chemistry of each starch. Mixed systems with tapioca starch generally showed lower plateau G′ values than mixed systems with wheat or corn starch, possibly owing to the lower amylose content of tapioca starch. © 2002 Society of Chemical Industry     

Antimicrobial activity and physical properties of chitosan–tapioca starch based edible films and coatings

Antimicrobial activity of edible coating solutions based on chitosan and blends of chitosan–tapioca starch with or without potassium sorbate (KS) addition was studied. The agar well diffusion assay showed an antagonist effect on the efficiency of chitosan against Lactobacillus spp. when KS and/or tapioca starch were present. A salmon slice coating assay showed that the chitosan solution was the best coating since aerobic mesophilic and psychrophilic cell counts were reduced, pH and weight loss remained acceptable throughout refrigerated storage, extending global quality to 6-days. Chitosan–tapioca starch based films reduced Zygosaccharomyces bailii external spoilage in a semisolid product but were not effective against Lactobacillus spp. The results suggest that antibacterial action depended on the application technique, due to the fact that chitosan is more available in a coating solution than in a film matrix. Interactions between chitosan–starch and/or KS could affect film physical properties and the antimicrobial activity of chitosan. The addition of chitosan reduced water vapor permeability and solubility of starch films.     

Anti-Listeria monocytogenes effect of bacteriocin-incorporated agar edible coatings applied on cheese

Bacteriocins synthesised by lactic acid bacteria are natural alternatives to control Listeria monocytogenes, a foodborne pathogen. Additionally, antimicrobial biopolymer coatings have significant benefits in food packaging and preservation. The effect of anti-L. monocytogenes enterocins synthesised by Enterococcus avium DSMZ17511 was evaluated when supported on agar edible films and applied as antimicrobial coatings on different cheese matrices artificially contaminated with L. monocytogenes 01/155. A decrease of at least 1 log unit in viability of the pathogen was detected. The wetter matrix of soft cheese facilitated rapid diffusion of the antimicrobials, while the drier matrix of semi hard cheese produced a gradual release with prolonged inhibition of the pathogen. Also, DSMZ17511 antimicrobial peptides, only at very high concentrations, exhibited mild cytotoxicity against L929 and Caco-2 cell lines. Therefore, application of these enterocin agar coatings could be an effective, low cost, natural and safe alternative to control L. monocytogenes in cheeses.     

Physical and Antimicrobial Properties of Tapioca Starch-HPMC Edible Films Incorporated with Nisin and/or Potassium Sorbate

The antimicrobial effectiveness of nisin and potassium sorbate, incorporated individual and combined, in films made with tapioca starch and its mixtures with hydroxypropyl methylcellulose were studied. The combination of antimicrobials was more effective against Listeria innocua and Zygosaccharomyces bailii than their individual incorporation, with the added advantage of providing greater inhibitory spectrum. The effect of the formulation on some physical properties was also evaluated. The blended biopolymers-based films showed an increase of stress (σ _r) and elastic modulus (E) but a decrease of the strain at break (ε _r). In turn, the water vapour permeability and solubility in water were enhanced. In addition, these films were clearer than those made only with starch. It must be remark that, despite the antimicrobial agents modified films physical properties, producing a lower σ _r and E, a higher ε _r, solubility and darker films, they maintained a suitable behaviour as a packaging material.     

Efficacy of freezing, frozen storage and edible antimicrobial coatings used in combination for control of Listeria monocytogenes on roasted turkey stored at chiller temperatures

The presence and growth of Listeria monocytogenes on ready-to-eat (RTE) turkey is an important food safety issue. The antilisterial efficacy of four polysaccharide-based edible coatings (starch, chitosan, alginate and pectin) incorporating sodium lactate (SL) and sodium diacetate (SD) as well as commercial preparations Opti.Form PD4, NovaGARD™ CB1, Protect-M and Guardian™ NR100 were compared against L. monocytogenes on roasted turkey. Pectin coating treatments incorporating SL/SD, Opti.Form PD4 with or without Protect-M, and NovaGARD™ CB1 displayed higher antimicrobial efficacy against.L. monocytogenes than the other antimicrobials and coating materials. In the second phase of the study, it was investigated whether frozen storage could enhance the antilisterial effectiveness of pectin coating treatments on chilled roasted turkey. Inoculated roasted turkey samples coated with pectin-based treatments were frozen for up to 4 weeks and subsequently stored at 4 °C for 8 weeks. Frozen storage significantly enhanced the antilisterial activity of various coating treatments; with selected treatments reducing the L. monocytogenes populations by as much as 1.1 log CFU/cm² during the subsequent 8-week chilled storage. This study demonstrates that pectin-based antimicrobial edible coatings hold promise in enhancing the safety of RTE poultry products and frozen storage has the potential to enhance their effectiveness.     

Properties and antimicrobial activity of edible films incorporated with kiam wood (Cotyleobium lanceotatum) extract

The antimicrobial properties of wood extracts are well known; however their application to edible films is limited. In this study, the minimum bactericidal concentration (MBC) of kiam wood extract was established as 300 mg/L at which bacterial growth was completely inhibited. The antimicrobial properties of hydroxypropyl methylcellulose (HPMC) films containing 1-5 fold of MBC of kiam wood extract were tested against Escherichia coli O175:H7, Staphylococcus aureus and Listeria monocytogenes. The edible films containing kiam wood extract exhibited more effective impact on the growth reduction of L. monocytogenes than S. aureus and E. coli (p < 0.05). The use of kiam wood extract at 1 and 2 fold of MBC incorporated into edible HPMC films did not exhibit any antimicrobial activity. However, the inhibitory effect of edible HPMC films containing kiam wood extract was observed at 3, 4 and 5 fold of MBC. The greatest zone of inhibition was observed at 5 fold of MBC incorporated in edible HPMC films. Tensile strength and elongation at break significantly decreased with the incorporation of kiam wood extract, whereas water vapor permeability and film solubility increased. The color of edible films became darker and more reddish-yellowish as well as having a lower transparency as the level of kiam wood extract was increased. Kiam wood extract incorporated in edible film provided the films with a rougher surface than pure edible film. Our results pointed out that the incorporation of kiam wood extract as a natural antibacterial agent has potential for use in extending the shelf life of food products.     

Physico-mechanical and antimicrobial properties of gelatin film from the skin of unicorn leatherjacket incorporated with essential oils

Gelatin films incorporated with bergamot (BO) and lemongrass oil (LO) at various concentrations as glycerol substitute were prepared and characterised. Incorporation of BO and LO at 5–25% (w/w protein) resulted in the decreases in both tensile strength (TS) and elongation at break (EAB) of the films. Water vapour permeability (WVP) were decreased in LO incorporated films, while it was increased in film added with BO at level higher than 5% (P < 0.05). Film solubility and transparency values decreased, and the films had the lowered light transmission in the visible range when BO and LO were incorporated. Films incorporated with LO showed inhibitory effect in a concentration dependent manner against Escherichia coli, Listeria monocytogenes, Staphylococcus aureus and Salmonella typhimurium, but BO added film inhibited only L. monocytogenes and S. aureus. Films containing both BO and LO did not inhibit Pseudomonas aeruginosa. Significant change of molecular organisation and higher intermolecular interactions among gelatin molecules were found in the film structure as determined by FTIR. Thermo-gravimetric analysis (TGA) demonstrated that films added with BO and LO exhibited enhanced heat stability with higher degradation temperature, compared with control film. Scanning electron microscopic (SEM) images revealed the presence of micro-pores in the essential oil incorporated films, which contributed to physical properties of the resulting films. Thus, gelatin films incorporated with BO and LO can be used as active packaging, but the properties could be modified, depending on essential oil added.     

Antimicrobial packaging films with a sorbic acid based coating

Following the enhancing demand for packaged raw food products with extended shelf-life, intensive efforts have been made developing active packaging materials with incorporated antimicrobials. With regard to technical problems in the production of antimicrobial films containing sorbic acid, the aim of this study was to evaluate the feasibility of packaging films coated with a lacquer containing sorbic acid to inhibit the growth of contaminating microorganisms on food surfaces. The antimicrobial efficacy was determined applying the test strains Escherichia coli DSM 498, Listeria monocytogenes DSM 15675 and Saccharomyces cerevisiae DSM 70449 according to the Japanese Industrial Standard Method JIS Z 2801:2000. Storage tests were performed with Gouda cheese and pork loin inoculated with the test strain E. coli and covered with the antimicrobial films and reference films respectively. In both storage experiments the results of the viable cell count showed a significant inhibitory effect on E .coli due to the antimicrobial properties of the developed packaging films, whereas there was no reduction of viable cells on the surface of the reference samples. These findings affirm that antimicrobial packaging films with a sorbic acid based coating are promising to provide a significant contribution to the quality and safety of packaged food.     

Influence of farming methods on microbiological contamination and prevalence of resistance to antimicrobial drugs in isolates from beef

The presence of Escherichia coli, Staphylococcus aureus, Listeria monocytogenes and Salmonella spp. was determined in 75 samples of conventional beef and in 75 samples of organic beef. All samples came from cattle slaughtered and processed in the same slaughterhouse and quartering room. A total of 180 E. coli, 180 S. aureus and 98 L. monocytogenes strains were analyzed by an agar disk diffusion assay for their resistance to 11 antimicrobials, for the case of E. coli and S. aureus, or 9 antimicrobials, for the case of L. monocytogenes. Salmonella spp. were not isolated from any of the beef samples. No significant differences in prevalence were obtained for any of the bacterial species tested between organic and conventional beef. E. coli isolated from organic beef exhibited significant differences in antimicrobial resistance against 5 of the 11 antimicrobials tested as compared to isolates recovered from conventional beef. In the case of S. aureus, these differences were only found for 3 of the 11 antimicrobials tested and for L. monocytogenes, no differences were obtained between isolates obtained from organic or conventional beef. Although no significant differences were obtained in microbiological contamination, E. coli and S. aureus isolates from organically farmed beef samples showed significantly lower rates of antimicrobial resistance in E. coli and S. aureus isolates.     

Physical,antimicrobial and antioxidant properties of starch‐based film containing ethanolic propolis extract

Propolis is a natural product that meets the requirements as functional additive for food packaging due to its antioxidant and antimicrobial activities. In this work, ethanolic propolis extract (EPE) was incorporated in cassava starch films, and characterisations with respect to their microstructure, mechanical properties, water vapour permeability (WVP), moisture sorption kinetics as well as antimicrobial and antioxidant capacities were performed. The results showed that tensile strength was not affected (P > 0.05) by the presence of EPE but Young's modulus decreased about 50% when compared to control films possibly because of EPE plasticiser effect. When 1% EPE was used, changes in moisture sorption properties were detected by a slightly hydrophobic character at films WVP. When extracted from the films, propolis retained its antioxidant activity. The films exhibited antimicrobial activity against Staphylococcus aureus and Escherichia coli even at low EPE concentrations (0.5%) mainly due to its phenolic compounds.     

Antimicrobial activity against foodborne pathogens of chitosan biopolymer films of different molecular weights

Antimicrobial activity against Listeria monocytogenes, Escherichia coli 0157:H7 and Samonella typhimurium of chitosan biopolymer films (CBFs) prepared with four different viscosities of chitosans (10, 40, 100 and 200 mPa s) were investigated by agar diffusion assay. The films were also characterized with measurements of color, tensile strength (TS), % elongation (EL), water vapor permeability and oxygen permeability. CBFs prepared with 100 mPa s chitosan showed an antimicrobial effect only on 10⁴ cfu/mL inoculation of L. monocytogenes while other viscosities showed an antilisterial effect on all concentrations (10⁴-10⁶ cfu/mL) of L. monocytogenes. CBFs prepared with 10 mPa s (CBF-10) and 40 mPa s (CBF-40) chitosans showed an inhibitory effect against E. coli 0157:H7 and S. typhimurium only at the 10⁴ cfu/mL concentration. CBFs prepared with the two higher viscosity chitosans did not show any effect regardless of bacterial level. TS and EL of the CBFs increased with increasing viscosity up to 100 mPa s. Molecular weight distribution was found to be positively correlated with viscosity. The oxygen permeability of the CBFs increased with increasing viscosity of chitosans, but water vapor transmission rate was not similarly affected. In conclusion, CBFs were more effective at inhibition of L. monocytogenes than S. typhimurium and E. Coli O157:H7. Molecular weight of chitosan must be chosen selectively to control the target foodborne pathogens.     

The influence of electron beam irradiation of antimicrobial-coated LDPE/polyamide films on antimicrobial activity and film properties

We evaluated the effects of ionizing radiation (1-3 kGy) and incorporation of antimicrobials on the functional properties of low-density polyethylene (LDPE)/polyamide films. We established the antimicrobial effectiveness of several coatings of FDA-approved antimicrobial compounds including sorbic acid, carvacrol, trans-cinnamaldehyde, thymol and rosemary oleoresin using selected food pathogen surrogates. The antimicrobial coatings were applied to one side of the LDPE films and dried. Films were irradiated using a 10 MeV linear electron beam accelerator at room temperature. All films showed inhibition zones in an agar diffusion test against Listeria innocua ATCC 33090 and Escherichia coli ATCC 884. In the liquid culture test, the antimicrobials significantly (p?0.05) reduced the specific growth rate of L. innocua by 3.8-8.5%, and decreased final cell concentration of both strains by 5.7-14.6% and 7.2-16.8%, respectively. All active compounds retained the antimicrobial activity when exposed to 1-3 kGy. Neither the presence of active compound nor dose affected the film's tensile strength and toughness. Additionally, films became more ductile and had improved moisture barrier functionality. Film's oxygen permeability was not affected by either treatment. Results are an initial step toward the development of self-sterile active packaging materials for use in combination with irradiation treatment of foods.     

Effect of lactoferrin and its derivatives against gram-positive bacteria in vitro and, combined with high pressure, in chicken breast fillets

The bactericidal activity of lactoferrin (LF), amidated lactoferrin (AMILF), pepsin digested lactoferrin (PDLF), and its activated (ALF) commercial form, against six strains of three gram-positive bacterial species was investigated. Listeria monocytogenes was most sensitive in vitro, Staphylococcus aureus showed a moderate resistance, and Enterococus faecalis was highly resistant to antimicrobials. When chicken breast fillets were inoculated with L. monocytogenes CECT5725 and treated with antimicrobials, reductions were below 0.5 log CFU/ml in all cases. In combination with high pressure (HHP) treatment at 400 MPa for 10 min, antimicrobials showed a slight additional bactericidal effect, always below 1 log CFU/g. Incorporation of antimicrobials 18 h before or 1 h after HHP treatment generally yielded better results than incorporation 1 h before HHP treatment, although reductions remained below 1.5 log CFU/g in all cases. LF and its derivatives showed a limited potential for pathogen control in meat.     

The antimicrobial,mechanical, physical and structural properties of chitosan–gallic acid films

Chitosan films incorporated with various concentrations of gallic acid were prepared and investigated for antimicrobial, mechanical, physical and structural properties. Four bacterial strains that commonly contaminate food products were chosen as target bacteria to evaluate the antimicrobial activity of the prepared gallic acid–chitosan films. The incorporation of gallic acid significantly increased the antimicrobial activities of the films against Escherichia coli, Salmonella typhimurium, Listeria innocua and Bacillus subtilis. Chitosan films incorporated with 1.5 g/100 g gallic acid showed the strongest antimicrobial activity. It was also found that tensile strength (TS) of chitosan film was significantly increased when incorporating 0.5 g/100 g gallic acid. Inclusion of 0.5 g/100 g gallic acid also significantly decreased water vapor permeability (WVP) and oxygen permeability (OP). Microstructure of the films was investigated by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) and it was found that gallic acid was dispersed homogenously into the chitosan matrix.