京尼平交联大豆蛋白/壳聚糖复合凝胶的控释

利用天然无毒的京尼平交联大豆蛋白(SB)和壳聚糖(CS)制备复合水凝胶(HD)并用作茶碱的控释载体。同时对其在模拟胃肠液和pH7.4缓冲液（PBS）中的控释特性进行了研究。结合扫描电镜和红外光谱以及核磁共振表征了复合凝胶的表观形态和结构。结果表明,复合水凝胶中大豆蛋白和壳聚糖通过京尼平发生了明显的交联作用,并呈现致密的片层结构。复合凝胶在模拟胃肠液和pH7.4PBS中均呈现溶胀现象,在模拟胃液中的溶胀度较低。而且凝胶在pH1.2模拟胃液中的释放量比模拟肠液和pH7.4PBS液中的低,并发现该凝胶具有pH响应,在120 h内可实现对茶碱的可控释放。因此,这种京尼平交联的复合凝胶具有作为药物在胃肠道中定向运送载体的潜力。     

Frontal polymerization preparation of poly(acrylamide‐co‐acrylic acid)/activated carbon composite hydrogels for dye removal

A series of poly(acrylic acid‐co‐acrylamide) (PAA)/activated carbon (AC) composite hydrogels were rapidly prepared via frontal polymerization (FP). It was found that an increase in the concentration of AC caused an increase in the front velocity (V_f) and the highest front temperature (T_max). It may be attributed to that AC particles could increase the liquid viscosity of reaction mixture and remain the reaction heat during FP. The Fourier transform infrared and scanning electron microscopy (SEM) confirmed that AC particles had entered the hydrogel network, and many spherical AC particles with an average diameter of 0.5–1 μm had been dispersed homogeneously in the PAA hydrogel matrix. The swelling behavior showed that the equilibrium swelling values of hydrogels increased when the concentration of AC particles increased. Adsorption studies showed that incorporation of AC particles into PAA hydrogel matrix could increase the sites of interaction between the hydrogels and crystal violet molecules and result in an increase of adsorption capacities of hydrogels toward dyes. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) hydrogels: Interactions with surfactants

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) [poly(NIPAM‐co‐SA)] hydrogels were modified with three different kind of surfactants (cationic, anionic, and nonionic) to study the effect on the swelling properties. The structural variation of the surfactant‐modified hydrogels was investigated in detail. The interaction between the surfactants and the hydrogel varies and strictly depends on the surfactant type. The variation in thermal stability of the modified surfactant hydrogels was investigated and compared with unmodified hydrogel. Further, the hydrogel swelling/diffusion kinetic parameters were investigated and diffusion of water into hydrogel was found to be of the non‐Fickian transport mechanism. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3423–3430, 2007     

Synthesis,characterization and swelling behavior of chitosan‐sucrose as a novel full‐polysaccharide superabsorbent hydrogel

A novel full‐polysaccharide hydrogel was prepared by crosslinking of chitosan with periodate‐oxidized sucrose. A tetraaldehyde molecule is synthesized via periodate oxidation of sucrose and then applied as a crosslinking agent to form a new hydrogel network. A mechanism for the superabsorbent hydrogel formation via reductive N‐alkylation was also suggested. The structure of the hydrogel was confirmed by FTIR spectroscopy, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). It is shown that crosslinking of chitosan can improve its thermal stability. The effects of crosslinker concentration, pH, and inorganic salt on the swelling behavior of the hydrogel were studied. The results indicate that the hydrogel has good pH sensitivity and pH reversible response. The smart hydrogels may have potential applications in the controlled delivery of bioactive agents and for wound‐dressing application © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of different modified lignins on the properties of xylan composite hydrogels

To improve the mechanical properties of hemicellulose hydrogel, a green, adjustable mechanical property, high swelling ratio (SR) composite hydrogel was successfully prepared by using modified lignin as a reinforcing agent. The structure and characteristics of the composite hydrogels were investigated by TGA, FTIR, SEM, rheological analysis, and SR. It can be found that the modified lignin could significantly improve the mechanical properties of the composite hydrogels. The maximum compressive stress of unmodified lignin hydrogel was 61.72 kPa and the compressive deformation was 75%. Compared with the unmodified lignin hydrogel, the mechanical properties were significantly improved, with the maximum compressive stress of the modified lignin hydrogel was 145.2 kPa and the compressive deformation was up to 90%. After adding modified lignin, the SR of the as-prepared hydrogel was up to 155.17 g/g, which was much higher than that of unmodified lignin hydrogel (105.79 g/g). The composite hydrogel had good antioxidant properties, and the free radical removal rate can reach 85.3%, which is twice as much as that without the modified lignin. With cost-effective lignin as a reinforcing agent, the as-prepared hemicellulose hydrogel with adjustable mechanical properties is favorable for great application potential.     

Synthesis and characterization of glucosamine modified poly(ethylene glycol) hydrogels via photopolymerization

This study presented the synthesis and characterization of glucosamine (GlcN) modified poly (ethylene glycol) (PEG) hydrogels. The chemical structure was characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The morphology of hydrogels was observed by scanning electron microscopy (SEM). The results indicated that GlcN was successfully incorporated into PEG hydrogel network. Moreover, the data of the swelling ratio showed that the ratio of GlcN‐modified PEG hydrogels was lower than that of pure poly(ethylene glycol) diacrylated (PEGDA). Biocompatibility of unreacted GlcN monomer and GlcN‐modified hydrogels was also evaluated in vitro. Compared with glucosamine hydrochloride, 2 and 5 mM N‐acroloyl‐glucosamine monomer exhibited no toxicity against bone marrow stromal cells (BMSCs), while with the concentration increased to 10 mM, cell viability appeared to decrease. However, when BMSCs were encapsulated in GlcN‐modified hydrogels via photopolymerization method, cells remained vigorous viability. Metabolic activity of the encapsulated cells demonstrated GlcN‐modified hydrogels was favorable for cell proliferation. Compared with free GlcN, covalent binding GlcN showed lower cytotoxicity and higher cell proliferation properties. As a result, GlcN‐modified PEGDA hydrogels could be used as safe and injectable cell carriers for in situ tissue engineering applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fluconazole release through semi‐interpenetrating polymer network hydrogels based on chitosan,acrylic acid,and citraconic acid

Semi‐interpenetrating polymer network hydrogels with different compositions of chitosan (Cs), acrylic acid, and citraconic acid were synthesized via free‐radical polymerization with ethylene glycol dimethacrylate as a crosslinker. The variations of the swelling percentages of the hydrogels with time, temperature, and pH were determined, and Cs–poly(acrylic acid) (PAA) hydrogels were found to be most swollen at pH 7.4 and 37°C. Scanning electron micrographs of Cs–PAA and Cs–P(AA‐co‐CA)‐1 (Cs‐poly(acrylicacid‐co‐citraconir acid)^?1) were taken to observe the morphological differences in the hydrogels. Although the less swollen hydrogel, Cs–P(AA‐co‐CA)‐1, had a sponge‐type structure, the most swollen hydrogel, Cs–PAA, displayed a uniform porous appearance. Fluconazole was entrapped in Cs–P(AA‐co‐CA)‐1 and Cs–PAA hydrogels, and the release was investigated at pH 4.0 and 37°C. The kinetic release parameters of the hydrogels (the gel characteristic constant and the swelling exponent) were calculated, and non‐Fickian diffusion was established for Cs–PAA, which released fluconazole much more slowly than the Cs–P(AA‐co‐CA)‐1 hydrogel. A therapeutic range was reached at close to 1 h for both hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of novel pH‐sensitive chitosan‐poly(acrylamide‐co‐itaconic acid) hydrogels

Novel pH‐sensitive chitosan‐poly(acrylamide‐co‐itaconic acid) hydrogels were prepared by free radical copolymerization of acrylamide and itaconic acid (IA) in chitosan solution. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and the swelling ratios of the hydrogels in water (pH 6.8) and pH 1.2. The influence of composition on the thermal properties of the hydrogels was assessed. The glass transition temperatures of the samples increased with IA content, ranging from 110 to 136 °C. Swelling of the hydrogels was found to obey second‐order kinetics with respect to the remnant swelling, indicating that diffusion is controlled by the relaxation of chains. The equilibrium swelling degree was strongly dependent on pH and composition. At both pH values the highest water uptake was obtained for the IA‐free sample M1. From the equilibrium swelling results the average molar mass between crosslinks, M_c, and the crosslink density of the chitosan‐poly(acrylamide‐co‐itaconic acid) samples were calculated. The results evidenced the reinforcing effect of IA on the hydrogel structure. It is concluded that these highly swellable pH‐sensitive hydrogels can be useful for applications in biomedicine and pharmacy. © 2013 Society of Chemical Industry     

Property modulation of poly(N‐isopropylacrylamide) hydrogels by incorporation of modified silica

Poly(N‐isopropylacrylamide) (PNIPA)/silica composite hydrogels were prepared and the effects of the silica incorporation on the swelling and breaking characteristics of the hydrogels were investigated. To improve the dispersive property of silica in the PNIPA matrix via the formation of covalent bonds between the polymer and silica, vinyl groups were introduced in the silica by reacting it with a coupling agent, 3‐methacryloxypropyltrimethoxysilane. When unmodified silica was used as filler in the PNIPA‐composite hydrogel, the swelling ratio of the composite hydrogel below the critical gel transition temperature (CGTT) increased with increasing silica content. However, when the modified silica was used as the filler, the swelling ratio below CGTT decreased with increasing silica content because of the enhanced distribution and additional crosslinking. Above CGTT, the swelling ratios of the PNIPA/silica hydrogels were similar regardless of the silica modification. The gel breaking stress of the hydrogels increased with increasing silica content, and this enhancement was larger for the modified silica hydrogel. Scanning electron microscopy images showed that the modified silica particles were distributed more evenly in the PNIPA matrix than the unmodified ones were and that the size of cell‐like structure of the hydrogel decreased with increasing modified silica content. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Synthesis and characteristics of interpenetrating polymer network hydrogel composed of chitosan and poly(acrylic acid)

Interpenetrating polymer network (IPN) hydrogels composed of chitosan and poly(acrylic acid) (PAAc) were synthesized by UV irradiation method, and their structure, crystallinity, swelling behavior, thermal property, and mechanical property were investigated. Chitosan/PAAc IPNs exhibited relatively high equilibrium water content and also showed reasonable sensitivity to pH. From the swelling behaviors at various pH's, Fourier transform infrared spectra at high temperature and thermal analysis confirmed the formation of polyelectrolyte complex due to the reaction between amino groups in chitosan and carboxyl groups in PAAc. For this reason, even at a swollen state, the present chitosan/PAAc IPNs possess good mechanical properties. Particularly, the CA‐2 sample (with a weight ratio of chitosan/PAAc = 50/50, molar ratio [NH₂]/[COOH] = 25/75) showed the lowest equilibrium water content and free water content, attributed to the more compact structure of the polyelectrolyte than CA‐1 or CA‐3 due to the high amount of interchain bond within the IPN. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 113–120, 1999     

Macroporous hydrogels based on chitosan derivatives: Preparation,characterization, and in vitro evaluation

Chitosan‐based hydrogels are considered as promising biomaterials for tissue engineering. Biological properties of chitosan could be significantly improved by modification of its chemical structure. This study was aimed at characterizing macroporous hydrogels fabricated by freeze‐drying technique from chitosan, which has been N‐acetylated by 2,2‐bis(hydroxymethyl)propionic acid or l ,d ‐lactide. The nature of the acetylated agent was shown to significantly affect hydrogels morphology, swelling behavior, zeta‐potential, and protein sorption as well as their degradation by lysozyme. According to scanning electron and confocal laser scanning microscopy, the hydrogels possessed interconnected macroporous network that facilitated cells penetration into the interior regions of the hydrogel. Chemical modification of chitosan significantly influenced L929 cell growth behavior on hydrogel compared to the non‐modified chitosan. The proposed chemical strategy for modification of chitosan could be considered as promising approach for improvement of chitosan hydrogels. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44651.     

Fabrication and characterization of novel macroporous cellulose–alginate hydrogels

Novel macroporous hydrogels were prepared by blending of cellulose and sodium alginate (SA) solution, and then cross-linking with epichlorohydrin. The resulting cellulose/SA hydrogels were characterized by solid-state ¹³C NMR, wide-angle X-ray diffraction (WXRD), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), rheological measurement, dynamic mechanical analysis (DMA) and swelling test to evaluate their structure, interior morphology, gelation time, compressive modulus, and equilibrium swelling ratio. Our findings revealed that the cellulose acted as backbone in the hydrogels, whereas SA contributed to the higher equilibrium swelling ratio. The combination of cellulose having semi-stiff chains and SA containing –COOH groups in the cross-linking hydrogel created the macroporous structure. This work provided a new pathway for preparation of hydrogel with large porous structure through incorporation of stiff polymer as support of pore wall and acidic polysaccharide as expander of pore size because of high water-absorbency.     

Synthesis and characterization of curdlan/β-cyclodextrin composite hydrogels for sustained-release

Curdlan/β-cyclodextrin (β-CD) composite hydrogels were prepared by using epichlorohydrin (ECH) and ethylene glycol diglycidyl ether (EGDGE) as cross-linkers respectively. The results showed that a macromolecular network structure was formed. This composite hydrogels showed certain temperature sensitivity, regular swelling ratio and unique mechanical property. The addition of β-CD improved the swelling property of hydrogels in neutral aqueous solution, showing completely opposite results to the cellulose/β-CD hydrogels. This composite hydrogel had certain temperature sensitivity and could sustained-release sodium salicylate for more than 8?hours. The curdlan/β-CD hydrogels, which were cross-linked by natural polymers, had a unique application prospect in the medicine.     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Antipolyelectrolyte superabsorbing nanocomposites: Synthesis and properties

Novel polyampholytic superabsorbing nanocomposites based on the zwitterionic sulfobetaine monomer [3‐(methacrylamido)propyl)]dimethyl(3‐sulfopropyl)ammonium hydroxide were synthesized through in situ polymerization in aqueous solution with different contents of an organo‐modified clay (OMMT, Cloisite 30B). Structural and thermomechanical properties of hydrogels were characterized by FT‐IR, XRD, and DMTA, respectively. Swollen gel strength of hydrogels was determined by a rheological method. Storage modulus of the hydrogels was considerably improved in comparison with its the clay‐free counterpart. The nanocomposite hydrogel containing 15% OMMT possessed the highest gel strength. The glass transition temperature was increased from 58.4 to 67.0°C for the clay‐free and nanocomposite hydrogel containing 8% OMMT, respectively. The swelling behavior of the hydrogel in various salt solutions was investigated. Antipolyelectrolyte behavior was observed with enhancement of concentration of mono‐ and multivalent salts. Swelling in the various pH media was nearly pH‐independent over a wide range of pH. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Novel preparative method for porous hydrogels using overrun process

Porous poly(vinyl alcohol) (PVA) hydrogels were prepared using the overrun process which is usually used in manufacturing ice cream. The pores in the hydrogel formed exhibit dual‐pore structure due to the injection of air bubbles and ice recrystallization. Morphological investigation revealed that overrun‐processed hydrogels had closed pore structures and that their pore size and size distribution had been influenced by the impeller rate and concentration of polymer solution. The closed‐pore structure was reformed into interconnected open‐pore structure at lower concentrations of the solution. The freeze–thawing process, which takes place in PVA cross‐linking, has no effect on the bubble structure, but removes the small pores formed during ice recrystallization. Besides the swelling ratio of overrun‐processed PVA hydrogels is increased tenfold in comparison with non‐porous hydrogels. Overrun‐processed hydrogels showed more rapid swelling kinetics than freeze‐dried and film‐like hydrogels due to their larger surface area. In the future, the overrun process can be applied to prepare porous scaffolds containing proteins, such as growth factors and other cytokines, without denaturation, because it operates at a low temperature. Copyright © 2004 Society of Chemical Industry     

Preparation and properties of hydrogels based on hemicellulose

Xylan with glucuronic acid functionalities, separated from birchwood, was converted into hydrogels by dissolving it together with chitosan in acidic conditions. The hydrogels were formed at certain xylan/chitosan compositions. The mechanism of the gel formation was investigated with FTIR. Complexation between glucuronic acid functionalities of xylan and amino groups of chitosan is suggested to be responsible for network formation. The swelling behavior of these hydrogels was studied at various pH levels and salt concentrations, and the hydrogels responded in a reversible manner to various stimuli. DMA of the films showed separated transitions that may correspond to different phases. Imaging with AFM in TappingMode™ of the surfaces indicated discrete xylan and chitosan phases. A sponge-like microporous structure, as shown with SEM, was formed when a hydrogel was freeze dried. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1661–1667, 1998     

Chitosan hydrogel loaded with Aloe vera gel and tetrasodium ethylenediaminetetraacetic acid (EDTA) as the wound healing material: in vitro and in vivo study

The main aim of the current study was to develop a chitosan hydrogel containing Aloe vera gel and Ethylenediaminetetraacetic acid (EDTA) as the wound healing materials. Chitosan with the concentration of (2% w/v) was prepared in AA (0.5%, v/v) and Tetrasodium EDTA (0.01% w/w) and AV (0.5% v/v) were added to the prepared polymer solution. As prepared solution was cross-linked by β-GP with the weight ratio of 1/6 w/w (1 chitosan and 6 β-GP). The characterization of the hydrogels showed that the hydrogels have porous structures and interconnected pores with the pores size range from 41.5 ± 14 to 48.3 ± 11 μm. The swelling and weight loss measurements of the hydrogels showed that the hydrogels could swell up to 240% of their initial weight during 8 h and loss 79.7 ± 3.5% of the initial weight during 14 days. The antibacterial studies depicted that the prepared Cs/tEDTA/AV hydrogel inhibited the growth of Staphylococcus aureus (the minimum inhibition concentration, MIC of 73 ± 4.8) and Pseudomonas aeruginosa (the MIC of 40 ± 7.9). Moreover, the prepared hydrogels were hemocompatible (Cs/tEDTA/AV: OD of 0.24 ± 0.30) and biocompatible (Cs/tEDTA/AV: OD of 0.38 ± 0.01). At the final stage, the wound healing assessments in the animal model revealed that the application of the prepared hydrogels effectively enhanced the wound healing process. In conclusion, the results confirmed the efficacy of the prepared hydrogels as the wound healing materials.     

Preparation and antidehydration of interpenetrating polymer network hydrogels based on 2‐hydroxyethyl methacrylate and N‐vinyl‐2‐pyrrolidone

This work reports the preparation of 2‐hydroxyethyl methacrylate (HEMA)/N‐vinyl‐2‐pyrrolidone (NVP) interpenetrating polymer network (IPN) hydrogels by UV‐initiated polymerization in the presence of free radical photoinitiator Darocur 1173 and cationic photoinitiator 4,4′‐dimethyl diphenyl iodonium hexafluorophosphate. The polymerization mechanism was investigated by the formation of gel network. The structure and morphology of the HEMA/NVP IPN hydrogels were characterized by fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). The results showed that the IPN gels exhibited homogeneous morphology. The dehydration rates of HEMA/NVP IPN hydrogels were examined by the gravimetric method. The results revealed that the hydrogels had a significant improvement of antidehydration ability in comparison with poly(2‐hydroxyethyl methacrylate)(PHEMA) hydrogel embedded physically with poly(N‐vinyl‐2‐pyrrolidone)(PVP). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Swelling characterizations of chitosan and polyacrylonitrile semi‐interpenetrating polymer network hydrogels

Temperature‐ and pH‐responsive semi‐interpenetrating polymer network (semi‐IPN) hydrogels constructed with chitosan and polyacrylonitrile (PAN) were studied. The characterizations of semi‐IPN hydrogels were investigated using Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). IPN hydrogels exhibited a relatively high swelling ratio, 23.31%–145.20% at room temperature. The swelling ratio of hydrogels depends on pH and temperature. DSC was used to determine the amount of free water in IPN hydrogels. The amount of free water increased with increasing chitosan content in the semi‐IPN hydrogels. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2011–2015, 2003