Synthesis,characterization, and metal ion uptake studies of chelating resins derived from formaldehyde/furfuraldehyde condensed phenolic schiff base of 4,4′‐diaminodiphenylmethane and o‐hydroxyacetophenone

The synthesis, characterization, and metal ion uptake studies of two chelating resins with multiple functional groups are reported. The chelating resins were synthesized by condensing a phenolic Schiff base derived from 4,4′‐diaminodiphenylmethane and o‐hydroxyacetophenone with formaldehyde or furfuraldehyde. The resins readily absorbed transition metal ions, such as Cu²⁺ and Ni²⁺, from dilute aqueous solutions. The Schiff base, resins, and metal polychelates were characterized by various instrumental techniques, such as elemental‐analysis, ultraviolet–visible spectroscopy proton and carbon‐13 nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR, respectively), X‐ray diffraction (XRD), and thermogravimetric–differential thermogravimetric analyses (TG–DTG). The ¹H‐NMR and ¹³C‐NMR studies were used to determine the sites for aldehyde condensation with the phenolic moiety. Fourier transform infrared data provided evidence for metal–ligand bonding. Thermogravimetric analysis was employed to compare the relative thermal stabilities of the resins and the polychelates. The TG data were fitted into different models and subjected to computational analysis to calculate the kinetic parameters. The XRD data indicate that the incorporation of metal ion into the resin matrix significantly enhanced the degree of crystallinity of the material. The extent of metal‐ion loading into the resins was studied in competitive and noncompetitive conditions, varying the time of contact, metal ion concentrations, and pH of the reaction medium in a suitable buffer medium. The furfuraldehyde‐condensed resin was more effective in removing metal ions than the formaldehyde‐condensed resins. The resins were selective for Cu²⁺, resulting in separation of Cu²⁺ and Ni²⁺ from the mixture at pH 5.89. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 570–581, 2003     

Synthesis of azo‐functionalized ion‐imprinted polymeric resin for selective extraction of nickel(II) ions

The work presented involved the fabrication and evaluation of an ion‐imprinted azo‐functionalized phenolic resin for selective extraction of Ni²⁺ ions from aqueous media. The azo‐containing ligand was first synthesized by coupling of a p‐aminophenol diazonium salt with resorcinol. The ligand was coordinated with Ni²⁺ ion template before condensation polymerization with formaldehyde and resorcinol was performed. The Ni²⁺ ions were extracted from the crosslinked resin matrix to finally afford the Ni²⁺ ion‐imprinted Ni‐PARF adsorbent. The synthetic steps were extensively investigated using elemental analysis and Fourier transform infrared, NMR and energy‐dispersive X‐ray spectroscopies. Also, the surface morphologies along with the surface areas of the adsorbent resin were evaluated using scanning electron microscopy and Brunauer–Emmett–Teller techniques, respectively. Batch experiments indicated that the pseudo‐second‐order kinetic equation provided the best fit with the experimentally obtained kinetic data and equilibrium was reached after 40 min. The isotherm studies were also in a good fit with the Langmuir model and the maximum adsorption capacities of Ni²⁺ ions with respect to both Ni‐PARF and control non‐imprinted C‐PARF adsorbents were around 260 and 100 mg g^?1, respectively. In the presence of Co²⁺, Cu²⁺, Zn²⁺ and Pb²⁺ as competing coexisting ions, the relative selectivity coefficients of Ni‐PARF for Ni²⁺ were, respectively, 84.91, 44.97, 30.41 and 32.20. Regeneration experiments indicated that after eight adsorption/desorption cycles, the Ni‐PARF adsorbent still maintained around 97% of its initial efficiency. © 2018 Society of Chemical Industry     

Synthesis and application of ion‐imprinted resin based on modified melamine–thiourea for selective removal of Hg(II)

A novel Hg(II) ion‐imprinted resin based on thiourea‐modified melamine was manufactured for selective elimination of Hg²⁺ from aqueous solutions. The polymerizable thiourea–melamine ligand together with its Hg(II) complex were extensively investigated using elemental analysis, Fourier transform infrared (FTIR) and ¹H NMR spectroscopies. The Hg(II) complex was used in a condensation polymerization in the presence of formaldehyde crosslinker and then the Hg(II) ions were leached out from the crosslinked polymeric network to finally leave the ion‐imprinted Hg‐PMTF resin. Both ion‐imprinted Hg‐PMTF and non‐imprinted resins were examined utilizing scanning electron microscopy and FTIR spectroscopy. The potential of the prepared resin for selective separation of Hg(II) ions from aqueous solutions was then evaluated by performing a series of batch experiments. Hg‐PMTF displayed an obvious rapid removal of Hg(II) ions with a pseudo‐second‐order kinetic pattern. In addition, the Langmuir adsorption isotherm model exhibited the best fit with the experimental data with comparatively high maximum adsorption capacity (360.5 mg g^?1). © 2015 Society of Chemical Industry     

Polystyrene anchored vanillin Schiff base—Complexation and ion removal studies

A set of six new polystyrene anchored metal complexes have been synthesized by the reaction of the metal salt with the polystyrene anchored Schiff base of vanillin. These complexes were characterized by elemental analyses, Fourier transform infrared spectroscopy, diffuse reflectance studies, thermal studies, and magnetic susceptibility measurements. The elemental analyses suggest a metal : ligand ratio of 1 : 2. The ligand is unidentate and coordinates through the azomethine nitrogen. The Mn(II), Fe(III), Co(II), Ni(II), and Cu(II) complexes are all paramagnetic while Zn(II) is diamagnetic. The Cu(II) complex is assigned a square planar structure, while Zn(II) is assigned a tetrahedral structure and Mn(II), Fe(III), Co(II), and Ni(II) are all assigned octahedral geometry. The thermal analyses were done on the ligand and its complexes to reveal their stability. Further, the application of the Schiff base as a chelating resin in ion removal studies was investigated. The polystyrene anchored Schiff base gave 96% efficiency in the removal of Ni(II) from a 20‐ppm solution in 15 min, without any interference from ions such as Mn(II), Co(II), Fe(III), Cu(II), Zn(II), U(VI), Na⁺, K⁺, NH₄⁺, Ca²⁺, Cl^?, Br^?, NO₃^?, NO₂^?,and CH₃CO₂^?. The major advantage is that the removal is achieved without altering the pH. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1536–1539, 2005     

The Potential Use of Low‐Grade Phosphate Rocks as Adsorbent

This study evaluates the suitability of using low‐grade phosphate for Cu²⁺ removal. The study also investigates the effects of the presence of ethylene‐diamine‐tetra‐acetic acid (EDTA), citric acid, tartaric acid and sodium chloride in a solution containing Cu²⁺ on the adsorption capacity of Cu²⁺ onto low‐grade phosphate. For aqueous solutions with 100 ppm Cu²⁺, the percentage removal of Cu²⁺ at pH 4 onto 0.2 g of 0.063 mm low‐grade phosphate was found to be 96.6 % after one hour. Using one mmol of either Cu²⁺, Cu‐NaCl, Cu‐tartaric acid, Cu‐EDTA, or Cu‐citric acid aqueous solutions, the present work shows trend of the percentage removal of Cu²⁺ at equilibrium time: Cu²⁺ > Cu‐NaCl > Cu‐tartaric acid > Cu‐EDTA > Cu‐citric acid. It is also found that increasing the concentration of ligand to copper ratio decreases the percentage removal of Cu²⁺ significantly. This means that the adsorption capacity is ligand type and concentration dependent.     

Synthesis of ion‐imprinting chitosan/PVA crosslinked membrane for selective removal of Ag(I)

A novel ion‐imprinted membranes were synthesized for selective removal and preconentration for Ag(I) ions from aqueous solutions. The membranes were obtained via crosslinking of chitosan (CS), PVA, and blend chitosan/PVA using glutaraldehyde (GA) as crosslinker. The FTIR spectra were used to confirm the membrane formation. Comparing with the nonimprinted membranes, Ag(I)‐imprinted CS and CS/PVA has higher removal capacity and selectivity for Ag⁺ ions. An enhancement in the Ag⁺ removal capacity by ～ 20% (from 77.8 to 94.4 mg g^–1) and ～ 50% (from 83.9 to 125 mg g^–1) was found in the Ag(I)‐imprinted CS and Ag(I)‐imprinted CS/PVA membranes, respectively, when compared with the nonimprinted membranes. Removal equilibra was achieved in about 40 min for the non‐ and ion‐imprinted CS/PVA. The pH and temperature significantly affected the removal capacity of ion‐imprinted membrane. The relative selectivity coefficient values of Ag⁺/Cu²⁺ and Ag⁺/Ni²⁺ are 9 and 10.7 for ion‐imprinted CS membrane and 11.1 and 15 for ion‐imprinted CS/PVA membrane when compared with nonimprinted membranes. The imprinted membranes can be easily regenerated by 0.01M EDTA and therefore can be reused at least five times with only 15% loss of removal capacity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of a new guar gum 4‐hydroxybenzoic acid resin and its use for the separation of heavy metal ions in industrial effluents

Hydroxybenzoic acid group has been incorporated onto guar gum by modified Porath's method of functionalization of polysaccharides. The newly synthesized guar gum 4‐hydroxybenzoic acid (GHBA) resin was characterized by Fourier‐transform infrared spectroscopy, elemental analysis, ion‐exchange capacity, column reusability, and physicochemical properties. The distribution coefficient (K_d) values and effect of pH on chelation of these metal ions using batch method were studied. The separations of mixture of Fe²⁺, Zn²⁺, Cu²⁺, Cd²⁺, and Pb²⁺ metal ions on GHBA resin on the basis of their distribution coefficient at various pH were also achieved using column chromatography. The effect of experimental parameters such as pH, treatment time, agitation speed, temperature, adsorbent dose, initial metal ion concentration, and flow rate on the removal of metal ions has been also studied. GHBA resin is effective adsorbents for the removal of different toxic metal ions from aqueous solutions and follows the order: Fe²⁺ > Zn²⁺ > Cu²⁺ > Cd²⁺ > Pb²⁺. POLYM. ENG. SCI. 2013. © 2012 Society of Plastics Engineers     

Synthesis and adsorption properties,toward some heavy metal ions,of a new polystyrene‐based terpyridine polymer

A novel polymeric ligand having 2,2′:6′,2″‐terpyridine as pendant group was prepared through a Williamson type etherification approach for the reaction between 4′‐hydroxy‐2,2′: 6′,2″‐terpyridine and the commercially available 4‐chloromethyl polystyrene. The chelating properties of the new polymer toward the divalent metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Pb²⁺) in aqueous solutions was studied by a batch equilibration technique as a function of contact time, pH, mass of resin, and concentration of metal ions. The amount of metal‐ion uptake of the polymer was determined by using atomic absorption spectrometry. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Pb²⁺ and that the metal‐ion uptake follows the order: Pb²⁺ > Cu²⁺ > Zn²⁺ > Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Nickel(II)‐imprinted monolithic columns for selective nickel recognition

Ni²⁺‐imprinted monolithic column was prepared for the removal of nickel ions from aqueous solutions. N‐Methacryloyl‐L ‐histidine was used as a complexing monomer for Ni²⁺ ions in the preparation of the Ni²⁺‐imprinted monolithic column. The Ni²⁺‐imprinted poly(hydroxyethyl methacrylate‐N‐methacryloyl‐L ‐histidine) (PHEMAH) monolithic column was synthesized by bulk polymerization. The template ion (Ni²⁺) was removed with a 4‐(2‐pyridylazo) resorcinol (PAR):NH₃? NH₄Cl solution. The water‐uptake ratio of the PHEMAH–Ni²⁺ monolith increased compared with PHEMAH because of the formation of nickel‐ion cavities in the polymer structure. The adsorption of Ni²⁺ ions on both the PHEMAH–Ni²⁺ and PHEMAH monoliths were studied. The maximum adsorption capacity was 0.211 mg/g for the PHEMAH–Ni²⁺ monolith. Fe³⁺, Cu²⁺, and Zn²⁺ ions were used as competitive species in the selectivity experiments. The PHEMAH–Ni²⁺ monolithic column was 268.8, 25.5, and 10.4 times more selective than the PHEMAH monolithic column for the Zn²⁺, Cu²⁺, and Fe³⁺ ions, respectively. The PHEMAH–Ni²⁺ monolithic column could be used repeatedly without a decrease in the Ni²⁺ adsorption capacity. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

SPOTLIGHT ON MANUFACTURING TRENDS IN JAPAN

Three reactive and functional polymers were synthesized by reacting formaldehyde with the phenolic Schiff bases derived from 4,4′-diaminodiphenylsulfone and o-, m-, and p-hydroxybenzaldehydes, respectively. The metal ion uptake behavior of these resins towards Cu²⁺, Ni²⁺, Co²⁺, and UO₂ ²⁺ ions in dilute aqueous media was studied. The optimum conditions for the absorption of metal ions were determined by varying the various parameters like contact time, size of the sorbents, concentration of the metal ion solutions, and the pH of the reaction medium. Suitable conditions were ascertained for preferential adsorption of the above metal ions from the salt solutions containing other interfering ions such as Na⁺, K⁺, and Mg²⁺. Presence of these alkali and alkaline earth metal ions in the salt solutions did not affect the adsorption behavior of the resins. It was observed that the structural features of the resins have a profound effect on the uptake characteristics. The position of the OH group present in the meta position with respect to the imine nitrogen atom in the resin, demonstrated a significant influence on the extent of metal ion adsorption by the resin. Out of the three resins reported here, the resin derived from the Schiff base of m-hydroxybenzaldehyde-4,4′-diaminodiphenylsulfone showed higher efficiency in uptake of metal ions from the solutions than the corresponding resins derived from the Schiff bases of o- and p-hydroxybenzaldehyde-4,4′-diaminodiphenylsulfone.     

Selective and rapid uptake of Cu(II) by bis(benzimidazole) modified oxirane and thiirane resins

The benzimidazole containing ligand 1,3-bis(benzimidazol-2-yl)propylamine (bbpaH) was anchored onto poly(glycidyl methacrylate-co-trimethylolpropane trimethacrylate) (GMT) and onto the thiirane analogue of poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (GME-S). Abbreviations of the modified polymers are GMT-bbpaH and GME-S-bbpaH. A multistep synthesis was applied in an attempt to increase the ligand concentration on the polymer GMT, This resulted in the resin GMT-bbpaH(ind) of which the solid state CP MAS ¹³C-NMR data showed that in this case only a monobenzimidazole was formed, i.e. only the 3-benzimidazole group was formed.Batch extraction capacities were determined for the chloride salts of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, Zn²⁺ and Ca²⁺ in the pH range 0.9–6.0 in buffered solutions at room temperature. All three resins show a high selectivity for Cu²⁺ under competitive conditions, with maximum ligand occupations of 54%, 64% and 27% for GMT-bbpaH, GME-S-bbpaH and GMT-bbpaH(ind), respectively. The resin GMT-bbpaH also takes up some Zn²⁺ ions at pH > 4.5, the maximum ligand occupation being 17%. The resin GME-S-bbpaH shows some affinity for Zn²⁺ and Cd²⁺ ions in this pH range, with ligand occupations of 17% and 7%, respectively. Only GMT-bbpaH(ind) shows complete selectivity for Cu(II) at pH > 3, although the maximum Cu²⁺-uptake capacity is rather low.Kinetic experiments showed that the oxirane derivative exhibits a faster uptake kinetics compared with the thiirane analogue. Incomplete stripping of the Cu(II)-loaded ion-exchange resins and loss of Cu(II)-uptake capacity was observed during the regeneration experiments.     

Conversion of soybean oil into ion exchange resins: Removal of copper (II), nickel (II), and cobalt (II) ions from dilute aqueous solution using carboxylate‐containing resin

An ion‐exchange resin containing carboxylic acid groups was prepared by reaction of epoxidized soybean oil with triethylene tetramine, followed by hydrolysis of glycerides by using sodium hydroxide solution. The cation exchange capacity of the resins was determined to be 3.50 mequiv/g. The adsorption capacity for Cu²⁺, Ni²⁺, and Co²⁺ on the obtained resin at pH 5.0 was found to be 192, 96, and 78 mg/g, respectively. Effect of pH on the adsorption capacity for copper (II), nickel (II), and cobalt (II) ions were also studied. Cu²⁺, Ni²⁺, and Co²⁺ were adsorbed at a pH above 3. These metal ions adsorbed on the resin are easily eluted by using 1N HCl solution. The selectivity of the resin for Cu²⁺ from mixtures containing Cu²⁺/Co²⁺/Ni²⁺ ions in the presence of sodium chloride was also investigated © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2386–2396, 2002     

Sorption properties of the iminodiacetate ion exchange resin,amberlite IRC‐718, toward divalent metal ions

The sorption properties of the commercially available cationic exchange resin, Amberlite IRC‐718, that has the iminodiacetic acid functionality, toward the divalent metal‐ions, Fe²⁺, Cu²⁺, Zn²⁺, and Ni²⁺ were investigated by a batch equilibration technique at 25°C as a function of contact time, metal ion concentration, mass of resin used, and pH. Results of the study revealed that the resin exhibited higher capacities and a more pronounced adsorption toward Fe²⁺ and that the metal‐ion uptake follows the order: Fe²⁺ > Cu²⁺> Zn²⁺ >Ni²⁺. The adsorption and binding capacity of the resin toward the various metal ions investigated are discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of resin IV: Salicylic acid,diaminonaphthalein, and formaldehyde terpolymer and its ion exchange

This article reports the synthesis, characterization, and ion exchange properties of a terpolymer. The terpolymer resin salicylic acid‐diaminonaphthalein‐formaldehyde (SDNF) was synthesized by the condensation of salicylic acid and diaminonaphthalein with formaldehyde in the presence of a hydrochloric acid catalyst. Terpolymer resin was characterized by elemental analysis, infrared (IR) spectroscopy, nuclear magnetic resonance spectroscopy, and UV–Visible spectral studies. The number average molecular weight of the resin was determined by nonaqueous conductometric titration. Chelation ion exchange properties have also been studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺ ions employing a batch equilibrium method. It was employed to study the selectivity of metal ion uptake involving the measurements of distribution of a given metal ion between the polymer sample and a solution containing the metal ion. The study was carried out over wide pH range and in a media of various ionic strengths. The terpolymer showed higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Removal of heavy‐metal ions from aqueous solution with nanochelating resins based on poly(styrene‐alt‐maleic anhydride)

Chelating resins have been considered to be suitable materials for the recovery of heavy metals in water treatments. A chelating resin based on modified poly(styrene‐alt‐maleic anhydride) with 2‐aminopyridine was synthesized. This modified resin was further reacted with 1,2‐diaminoethan or 1,3‐diaminopropane in the presence of ultrasonic irradiation for the preparation of a tridimensional chelating resin on the nanoscale for the recovery of heavy metals from aqueous solutions. The adsorption behavior of Fe²⁺, Cu²⁺, Zn²⁺, and Pb²⁺ ions were investigated by the synthesis of chelating resins at various pH's. The prepared resins showed a good tendency for removing the selected metal ions from aqueous solution, even at acidic pH. Also, the prepared resins were examined for the removal of metal ions from industrial wastewater and were shown to be very efficient at adsorption in the cases of Cu²⁺, Fe²⁺, and Pb²⁺. However; the adsorption of Zn²⁺ was lower than those of the others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis, and differential scanning calorimetry analysis. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Selective separation of some heavy metals by poly(vinyl alcohol)‐grafted membranes

A poly(vinyl alcohol) membrane (PVA) was modified by radiation graft copolymerization of acrylic acid/styrene (AAc/Sty) comonomers. The Cu and Fe ion‐transport properties of these membranes were investigated using a diaphragm dialysis cell. In the feed solution containing CuCl₂ or a mixture of CuCl₂ and FeCl₃, the PVA‐g‐P(AAc/Sty) membranes showed high degrees of permselectivity toward Cu²⁺ rather than toward Fe³⁺. The permeation of Cu²⁺ ions through the membranes was found to increase with decrease in the grafting yield. However, as the content of Cu²⁺ ions in the Cu/Fe binary mixture feed solutions decreased, the rate and the amount of transported Cu²⁺ through the grafted membrane decreased, with no appreciable permselectivity toward Fe³⁺. When Fe²⁺ ions were used instead of Fe³⁺ ions in the feed solution containing Cu²⁺, the transport of both Cu²⁺ and Fe²⁺ through the membrane was observed. The rate of transport of Fe²⁺ was higher than that of Cu²⁺. In addition, it was found that the selective transport of ions was significantly influenced by the pH difference between both sides of the membranes. As the pH of the feed or the received solution decreased, both Cu²⁺ and Fe³⁺ passed through the membrane and were transported to the received solution. The role of carboxylic acid and the hydroxyl groups of the grafted membranes in the transportation process of ions is discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 125–132, 2000     

Chelation ion‐exchange properties of copolymer resin derived from 4‐hydroxyacetophenone,oxamide, and formaldehyde

A copolymer (4‐HAOF) prepared by condensation of 4‐hydroxyacetophenone and oxamide with formaldehyde in the presence of an acid catalyst proved to be a selective chelating ion‐exchange copolymer for certain metals. Chelating ion‐exchange properties of this copolymer were studied for Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁺ ions. A batch equilibrium method was employed in the study of the selectivity of metal‐ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion. The study was carried out over a wide pH range and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Hg²⁺ ions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 787–790, 2003     

Thiourea modified hyper‐crosslinked polystyrene resin for heavy metal ions removal from aqueous solutions

A hyper‐crosslinked resin chemically modified with thiourea (TM‐HPS) was synthesized, characterized, and evaluated for the removal of heavy metal ions (Pb²⁺, Cd²⁺, and Cu²⁺) from aqueous solutions. The structural characterization results showed that a few thiourea groups were grafted on the surface of the resin with a big BET surface area and a large number of narrow micropores. Various experimental conditions such as pH, contact time, temperature, and initial metal concentration of the three heavy metal ions onto TM‐HPS were investigated systematically. The results indicated that the prepared resin was effective for the removal of the heavy metal ions from aqueous solutions. The isotherm data could be better fitted by Langmuir model, yielding maximum adsorption capacities of 689.65, 432.90, and 290.69 mg/g for Pd²⁺, Cd²⁺, and Cu²⁺, respectively. And the adsorption kinetics of the three metal ions followed the pseudo‐second‐order equation. FTIR and XPS analysis of TM‐HPS before and after adsorption further revealed that the adsorption mechanism could be a synergistic effect between functional groups and metal ions and electrostatic attraction, which may provide a new insight into the design of highly effective adsorbents and their potential technological applications for the removal of heavy metal ions from aqueous solutions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45568.     

Characterization and adsorption behavior of newly synthesized sodium bis(2-ethylhexyl) sulfosuccinate–cerium (IV) phosphate (AOT–CeP) cation exchanger

A new cationic exchange material, sodium bis(2-ethylhexyl) sulfosuccinate (AOT) with cerium (IV) phosphate (AOT–CeP) has been synthesized. The characterization of the ion exchanger was performed by using infra red spectroscopy (IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), thermo gravimetric analysis/differential thermo gravimetric analysis (TGA/DTA/DTG) and elemental analysis. The ion exchange properties like ion exchange capacity, elution and concentration behavior of AOT–CeP were determined by taking the material into a column and elution of H⁺ was done by NaNO₃. The thermal stability of the ion exchanger was studied by determining ion exchange capacity after heating to different temperatures for one hour. The adsorption studies on AOT–CeP demonstrated that the material is selective for Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions. AOT–CeP was found to be effective for the separation of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of alkali metals/alkaline earth metals. This cationic exchanger was also effective for the removal of Cu²⁺, Pb²⁺, Cd²⁺, Zn²⁺ and Hg²⁺ ions in the presence of acid and other transition metal ions. Thus, AOT–CeP can be used for the removal of these ions from the waste water during its treatment.     

Chelation ion‐exchange study of copolymer resin derived from 8‐hydroxyquinoline 5‐sulphonic acid,oxamide, and formaldehyde

Copolymers (8‐HQ5‐SAOF) were synthesized by the condensation of 8‐hydroxyquinoline 5‐sulphonic acid (8‐HQ5‐SA) and oxamide (O) with formaldehyde (F) in the presence of acid catalyst. Four different copolymers were synthesized by using varied molar proportion of the reacting monomers. Copolymer resin composition has been determined on the basis of their elemental analysis and average molecular weights of these resins were determined by conductometric titration in nonaqueous medium. Viscometric measurement in dimethyl sulphoxide (DMSO) has been carried out with a view to ascertain the characteristic functions and constants. Electronic spectra, FTIR, and proton nuclear magnetic resonance spectra were studied to elucidate the structures. The newly synthesized copolymer proved to be a selective chelating ion‐exchange copolymer for certain metals. The chelating ion‐exchange properties of this synthesized copolymer was studied for different metal ions such as Fe³⁺, Cu²⁺, Ni²⁺, Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺. A batch equilibrium method was used in the study of the selectivity of metal ion uptake involving the measurements of the distribution of a given metal ion between the copolymer sample and a solution containing the metal ion only for representative copolymer 8‐HQ5‐SAOF‐I due to economy of space. The study was carried out over a wide pH range, shaking time, and in media of various ionic strengths. The copolymer showed a higher selectivity for Fe³⁺, Cu²⁺, and Ni²⁺ ions than for Co²⁺, Zn²⁺, Cd²⁺, and Pb²⁺ ions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010