共查询到20条相似文献,搜索用时 0 毫秒
1.
Metaheuristics have been widely utilized for solving NP-hard optimization problems. However, these algorithms usually perform differently from one problem to another, i.e., one may be effective on a problem but performs badly on another problem. Therefore, it is difficult to choose the best algorithm in advance for a given problem. In contrast to selecting the best algorithm for a problem, selection hyper-heuristics aim at performing well on a set of problems (instances). This paper proposes a selection hyper-heuristic based algorithm for multi-objective optimization problems. In the proposed algorithm, multiple metaheuristics exhibiting different search behaviors are managed and controlled as low-level metaheuristics in an algorithm pool, and the most appropriate metaheuristic is selected by means of a performance indicator at each search stage. To assess the performance of the proposed algorithm, an implementation of the algorithm containing four metaheuristics is proposed and tested for solving multi-objective unconstrained binary quadratic programming problem. Experimental results on 50 benchmark instances show that the proposed algorithm can provide better overall performance than single metaheuristics, which demonstrates the effectiveness of the proposed algorithm. 相似文献
2.
The vehicle routing problem (VRP) is an important aspect of transportation logistics with many variants. This paper studies the VRP with backhauls (VRPB) in which the set of customers is partitioned into two subsets: linehaul customers requiring a quantity of product to be delivered, and backhaul customers with a quantity to be picked up. The basic VRPB involves finding a collection of routes with minimum cost, such that all linehaul and backhaul customers are serviced. A common variant is the VRP with selective backhauls (VRPSB), where the collection from backhaul customers is optional. For most real world applications, the number of vehicles, the total travel cost, and the uncollected backhauls are all important objectives to be minimized, so the VRPB needs to be tackled as a multi-objective problem. In this paper, a similarity-based selection evolutionary algorithm approach is proposed for finding improved multi-objective solutions for VRPB, VRPSB, and two further generalizations of them, with fully multi-objective performance evaluation. 相似文献
3.
《Expert systems with applications》2014,41(7):3157-3167
In designing phase of systems, design parameters such as component reliabilities and cost are normally under uncertainties. This paper presents a methodology for solving the multi-objective reliability optimization model in which parameters are considered as imprecise in terms of triangular interval data. The uncertain multi-objective optimization model is converted into deterministic multi-objective model including left, center and right interval functions. A conflicting nature between the objectives is resolved with the help of intuitionistic fuzzy programming technique by considering linear as well as the nonlinear degree of membership and non-membership functions. The resultants max–min problem has been solved with particle swarm optimization (PSO) and compared their results with genetic algorithm (GA). Finally, a numerical instance is presented to show the performance of the proposed approach. 相似文献
4.
The unequal area facility layout problem (UA-FLP) which deals with the layout of departments in a facility comprises of a class of extremely difficult and widely applicable multi-objective optimization problems with constraints arising in diverse areas and meeting the requirements for real-world applications. Based on the heuristic strategy, the problem is first converted into an unconstrained optimization problem. Then, we use a modified version of the multi-objective ant colony optimization (MOACO) algorithm which is a heuristic global optimization algorithm and has shown promising performances in solving many optimization problems to solve the multi-objective UA-FLP. In the modified MOACO algorithm, the ACO with heuristic layout updating strategy which is proposed to update the layouts and add the diversity of solutions is a discrete ACO algorithm, with a difference from general ACO algorithms for discrete domains which perform an incremental construction of solutions but the ACO in this paper does not. We propose a novel pheromone update method and combine the Pareto optimization based on the local pheromone communication and the global search based on the niche technology to obtain Pareto-optimal solutions of the problem. In addition, the combination of the local search based on the adaptive gradient method and the heuristic department deformation strategy is applied to deal with the non-overlapping constraint between departments so as to obtain feasible solutions. Ten benchmark instances from the literature are tested. The experimental results show that the proposed MOACO algorithm is an effective method for solving the UA-FLP. 相似文献
5.
The consideration of this paper is given to address the straight and U-shaped assembly line balancing problem. Although many attempts in the literature have been made to develop deterministic version of the assembly line model, the attention is not considerably given to those in uncertain environment. In this paper, a novel bi-objective fuzzy mixed-integer linear programming model (BOFMILP) is developed so that triangular fuzzy numbers (TFNs) are employed in order to represent uncertainty and vagueness associated with the task processing times in the real production systems. In this proposed model, two conflicting objectives (minimizing the number of stations as well as cycle time) are considered simultaneously with respect to set of constraints. For this purpose, an appropriate strategy in which new two-phase interactive fuzzy programming approach is proposed as a solution method to find an efficient compromise solution. Finally, validity of the proposed model as well as its solution approach are evaluated though numerical examples. In addition, a comparison study is conducted over some test problems in order to assess the performance of the proposed solution approach. The results demonstrate that our proposed interactive fuzzy approach not only can be applied in ALBPs but also is capable to handle any practical MOLP models. Moreover, in light of these results, the proposed model may constitute a framework aiming to assist the decision maker (DM) to deal with uncertainty in assembly line problem. 相似文献
6.
7.
This paper proposes a novel multi-objective root system growth optimizer (MORSGO) for the copper strip burdening optimization. The MORSGO aims to handle multi-objective problems with satisfactory convergence and diversity via implementing adaptive root growth operators with a pool of multi-objective search rules and strategies. Specifically, the single-objective root growth operators including branching, regrowing and auxin-based tropisms are deliberately designed. They have merits of appropriately balancing exploring & exploiting and self-adaptively varying population size to reduce redundant computation. The effective multi-objective strategies including the fast non-dominated sorting and the farthest-candidate selection are developed for saving and retrieving the Pareto optimal solutions with remarkable approximation as well as uniform spread of Pareto-optimal solutions. With comprehensive evaluation against a suit of benchmark functions, the MORSGO is verified experimentally to be superior or at least comparable to its competitors in terms of the IGD and HV metrics. The MORSGO is then validated to solve the real-world copper strip burdening optimization with different elements. Computation results verifies the potential and effectiveness of the MORSGO to resolve complex industrial process optimization. 相似文献
8.
In this study, a two-phase procedure is introduced to solve multi-objective fuzzy linear programming problems. The procedure provides a practical solution approach, which is an integration of fuzzy parametric programming (FPP) and fuzzy linear programming (FLP), for solving real life multiple objective programming problems with all fuzzy coefficients. The interactive concept of the procedure is performed to reach simultaneous optimal solutions for all objective functions for different grades of precision according to the preferences of the decision-maker (DM). The procedure can be also performed to obtain lexicographic optimal and/or additive solutions if it is needed. In the first phase of the procedure, a family of vector optimization models is constructed by using FPP. Then in the second phase, each model is solved by FLP. The solutions are optimal and each one is an alternative decision plan for the DM. 相似文献
9.
Preference articulation in multi-objective optimization could be used to improve the pertinency of solutions in an approximated Pareto front. That is, computing the most interesting solutions from the designer's point of view in order to facilitate the Pareto front analysis and the selection of a design alternative. This articulation can be achieved in an a priori, progressive, or a posteriori manner. If it is used within an a priori frame, it could focus the optimization process toward the most promising areas of the Pareto front, saving computational resources and assuring a useful Pareto front approximation for the designer. In this work, a physical programming approach embedded in an evolutionary multi-objective optimization is presented as a tool for preference inclusion. The results presented and the algorithm developed validate the proposal as a potential tool for engineering design by means of evolutionary multi-objective optimization. 相似文献
10.
In this paper, a multi-objective 2-dimensional vector packing problem is presented. It consists in packing a set of items, each having two sizes in two independent dimensions, say, a weight and a length into a finite number of bins, while concurrently optimizing three cost functions. The first objective is the minimization of the number of used bins. The second one is the minimization of the maximum length of a bin. The third objective consists in balancing the load overall the bins by minimizing the difference between the maximum length and the minimum length of a bin. Two population-based metaheuristics are performed to tackle this problem. These metaheuristics use different indirect encoding approaches in order to find good permutations of items which are then packed by a separate decoder routine whose parameters are embedded in the solution encoding. It leads to a self-adaptive metaheuristic where the parameters are adjusted during the search process. The performance of these strategies is assessed and compared against benchmarks inspired from the literature. 相似文献
11.
Construction trades need to share temporary structures to increase the output of direct work while controlling the labor input of indirect work. The purpose of this research is to develop a framework to determine the optimal location of temporary structures in a computerized practical manner for piping construction projects. Based on the spatial relationship between work envelope and scaffolding placement requirements, this paper presents the optimization model in two phases: the simulation-based optimization model and a multi-attribute utility (MAU) based alternative selection model. A multi-objective optimization model is established to improve scaffolding availability among multiple activities while maximizing piping crew productivity. The multi-attribute utility model is employed to handle the uncertainty of the assessment weights on the attributes to illustrate the preference of decision makers among different scaffolding placement alternatives obtained from the first phase. The approach was validated in a piping module, which provided superintendents and space planners with an effective decision-making tool among possible scaffolding alternatives in piping construction. The proposed optimization technique is an alternative methodology for solving the productivity-tasks-scaffolding trade-off problem, which further revolutionizes the spatial coordination process of workspace management and temporary structure planning. 相似文献
12.
Despite the significant number of benchmark problems for evolutionary multi-objective optimisation algorithms, there are few in the field of robust multi-objective optimisation. This paper investigates the characteristics of the existing robust multi-objective test problems and identifies the current gaps in the literature. It is observed that the majority of the current test problems suffer from simplicity, so five hindrances are introduced to resolve this issue: bias towards non-robust regions, deceptive global non-robust fronts, multiple non-robust fronts (multi-modal search space), non-improving (flat) search spaces, and different shapes for both robust and non-robust Pareto optimal fronts. A set of 12 test functions are proposed by the combination of hindrances as challenging test beds for robust multi-objective algorithms. The paper also considers the comparison of five robust multi-objective algorithms on the proposed test problems. The results show that the proposed test functions are able to provide very challenging test beds for effectively comparing robust multi-objective optimisation algorithms. Note that the source codes of the proposed test functions are publicly available at www.alimirjalili.com/RO.html. 相似文献
13.
Our interest lies in solving sum of squares (SOS) relaxations of large-scale unconstrained polynomial optimization problems. Because interior-point methods for solving these problems are severely limited by the large-scale, we are motivated to explore efficient implementations of an accelerated first-order method to solve this class of problems. By exploiting special structural properties of this problem class, we greatly reduce the computational cost of the first-order method at each iteration. We report promising computational results as well as a curious observation about the behaviour of the first-order method for the SOS relaxations of the unconstrained polynomial optimization problem. 相似文献
14.
利用约束规划(constraintprogramming,CP)与数学规划(mathematicalprogramming,MP)结合的方法求解调度问题已经获得了一些较好的研究成果,正成为调度问题研究领域的一个新的热点研究方向.本文针对求解资源受限项目调度问题(RCPSP)的整数规划模型,设计了基于CP技术的问题和模型预处理方法,证明了整数规划模型的有效不等式定理,提出了通过将项目子网络图转化为加权最大团问题求解后获得有效不等式的方法.引用标准问题库PSPLIB中的一组典型问题进行求解实验,结果表明本文提出的有效不等式可以明显改进模型的求解质量和时间性能.论文最后对实验结果进行了深入讨论,讨论了未来的研究方向. 相似文献
15.
A two-phase possibilistic linear programming methodology for multi-objective supplier evaluation and order allocation problems 总被引:2,自引:0,他引:2
In this study, an integration of the analytic hierarchy process (AHP) and a multi-objective possibilistic linear programming (MOPLP) technique is developed to account for all tangible, intangible, quantitative, and qualitative factors which are used to evaluate and select suppliers and to define the optimum order quantities assigned to each. A multi-objective linear programming technique is first employed to solve the problem. To model the uncertainties encountered in the integrated supplier evaluation and order allocation methodology, fuzzy theory is adopted. Hence, possibilistic linear programming (PLP) is proposed for solving the problem, as it is believed to be the best approach for absorbing the imprecise nature of the real world. In the supplier evaluation phase, environmental criteria are also considered. 相似文献
16.
G.R. Ruetsch 《Structural and Multidisciplinary Optimization》2005,30(1):27-37
This paper presents an interval algorithm for solving multi-objective optimization problems. Similar to other interval optimization techniques, [see Hansen and Walster (2004)], the interval algorithm presented here is guaranteed to capture all solutions, namely all points on the Pareto front. This algorithm is a hybrid method consisting of local gradient-based and global direct comparison components. A series of example problems covering convex, nonconvex, and multimodal Pareto fronts is used to demonstrate the method. 相似文献
17.
We present an exact optimization algorithm for the Orienteering Problem with Time Windows (OPTW). The algorithm is based on bi-directional and bounded dynamic programming with decremental state space relaxation. We compare different strategies proposed in the literature to guide decremental state space relaxation: our experiments on instances derived from the literature show that there is no dominance between these strategies. We also propose a new heuristic technique to initialize the critical vertex set and we provide experimental evidence of its effectiveness. 相似文献
18.
Two of the most researched problems on transfer line, transfer line balancing problem (TLBP) and buffer allocation problem (BAP), are usually solved separately, although they are closely interrelated. When machine tools have different reliability, the traditional balancing approaches lead to a deviation of the production rate from the actual throughput, which is used as the objective of the following optimization on BAP. This may not only reduce the solution space of BAP, but also bring about a biased overall result.In this paper, the simultaneous solution of these two problems is presented, which includes transfer line balancing problem, BAP, and selection of line configuration, machine tools and fixtures. Production rate computed through simulation software and total cost considering machine tools and buffer capacities are used as two objective functions. The problem is solved applying a multi-objective optimization approach. Two well-known evolutionary algorithms are considered: Non-dominated Sorting Genetic Algorithm-II (NSGA-II) and Multi-Objective Particle Swarm Optimization (MOPSO). A real case study related to automotive sector is used to demonstrate the validity of the proposed approach. 相似文献
19.
Nadia Dahmani François Clautiaux Saoussen Krichen El-Ghazali Talbi 《Computers & Industrial Engineering》2013
In this paper, we address a bi-objective 2-dimensional vector packing problem (Mo2-DBPP) that calls for packing a set of items, each having two sizes in two independent dimensions, say, a weight and a height, into the minimum number of bins. The weight corresponds to a “hard” constraint that cannot be violated while the height is a “soft” constraint. The objective is to find a trade-off between the number of bins and the maximum height of a bin. This problem has various real-world applications (computer science, production planning and logistics). Based on the special structure of its Pareto front, we propose two iterative resolution approaches for solving the Mo2-DBPP. In each approach, we use several lower bounds, heuristics and metaheuristics. Computational experiments are performed on benchmarks inspired from the literature to compare the effectiveness of the two approaches. 相似文献
20.
Zhen Luo Jingzhou Yang Li-Ping Chen Yun-Qing Zhang Karim Abdel-Malek 《Structural and Multidisciplinary Optimization》2006,31(1):26-39
This work presents a hybrid fuzzy-goal multi-objective programming scheme for topological optimization of continuum structures,
in which both static and dynamic loadings are considered. The proposed methodology fortopological optimization first employs a fuzzy-goal programming scheme at the top level for multi-objective problems with
static and dynamic objectives. For the static objective with multi-stiffness cases in the fuzzy-goal formulation, a hybrid approach, involving a hierarchical sequence approach or a hierarchical sequence approach coupled with a compromise programming method, is especially suggested for the statically loaded multi-stiffness structure at the sublevel. Concerning
dynamic optimization problems of freevibration cases, nonstructural mass, oscillation of the objective function, and repeated eigenvalues are also discussed. Solid
Isotropic Material with Penalization density–stiffness interpolation scheme is used to indicate the dependence ofmaterial modulus upon regularized element densities. The globally convergent version of the method of moving asymptotes and
the sequential linear programming method areboth employed as optimizers. Several applications have been applied to demonstrate the validation of the presented methodologies. 相似文献