Directional Interactions of α‐Particles with FOX‐7. A DFT Study

FOX‐7 is exposed to the effects of α‐particles from selected directions of approach. Various energies and properties of these composite FOX‐7 systems (FOX‐7+α‐particle) are obtained. The effect of α‐particles on FOX‐7 is drastic. The CC double bond turns into a single bond and one of the C NO₂ bonds highly elongates. The approach from the side of amino groups results more stable composite system compared to the approach from the side of nitro groups.     

Infrared spectroscopic studies of poly(methyl methacrylate) doped with a new sulfur‐containing ligand and its cobalt(II) complex during γ‐radiolysis

Infrared (IR) spectroscopy studies were performed for poly(methyl methacrylate) (PMMA) samples doped with an organic ligand or its cobalt(II) complex after the extraction of the dopant during γ‐radiolysis. There were no drastic changes in the IR absorption band position, but noticeable changes in the intensities were found. The relative transmission of IR absorption bands, such as those at 750, 840, 1065, and 1388 cm^?1, were measured according to the transmission of the carbonyl group band at 1717 cm^?1. The degradation and recombination mechanism of different groups in the polymeric chain or backbone during radiolysis could be explained by the behavior of the relative transmission data for each group with increasing exposure dose. The tacticity of the PMMA samples was unchanged during radiolysis, and they were found to be syndiotactic. This was confirmed by the IR J values for different PMMA samples before and after irradiation. The protection efficiency of the organic ligand and its cobalt(II) complex was also investigated, and it was found that the organic ligand was more protective than the cobalt(II) complex for PMMA samples against γ‐rays. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1937–1950, 2004     

Synthesis and FTIR spectroscopic investigation of the UV curing kinetics of telechelic urethane methacrylate crosslinkers based on the renewable resource—Cardanol

UV curable telechelic urethane–methacrylate crosslinkers based on the natural resource—cardanol was synthesized in a one pot synthetic step involving end capping of isophorone diisocyanate with one equivalent of hydroxyethyl methacrylate followed by condensation with cardanol. The structures of the resins were characterized by ¹H and ¹³C NMR, fourier transform infrared (FTIR) and Matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) spectroscopies and size exclusion chromatography (SEC). The curing process and double bond conversion in presence of 2,2‐diethoxy acetophenone as photoinitiator upon UV irradiation was followed by Fourier transform infrared spectroscopy. These hydrogen bonded crosslinkers based on cardanol and its derivatives had higher double bond conversion when compared to a nonhydrogen bonding standard such as hexanediol diacrylate (HDDA) under identical conditions. The temperature effects on the hydrogen bonding were investigated, and a decrease in the extent of double bond conversion with increase in temperature was observed for the telechelic urethane–methacrylate crosslinkers whereas a steady increase in the curing rate was observed for HDDA. This gives direct indication of the influence of hydrogen bonding on the curing process. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Interactions of Ionic Liquids with Polysaccharides – 7: Thermal Stability of Cellulose in Ionic Liquids and N‐Methylmorpholine‐N‐oxide

The thermal behavior of cellulose dissolved in ionic liquids was studied in comparison to NMMO solutions. The cellulose solutions were characterized by reaction calorimetry and UV‐vis spectroscopy. Generation of chromophoric substances in cellulose/IL solutions is minimized by exposing to temperatures of above 100 °C for longer time periods. Dynamic calorimetric investigations revealed first thermal activities above 180 °C applying EMIMac and above 200 °C for BMIMCl and five other ILs tested. Moreover, even in the case of modified cellulose/IL solutions, e.g., activated charcoal, only a slight decline of onset temperatures was registered compared to modified cellulose/NMMO solutions.

     

Molecular origin of unusual physical and mechanical properties in novel phenolic materials based on benzoxazine chemistry

The effect of temperature on hydrogen bonding was investigated by measuring the integrated infrared absorbance of various hydrogen-bonding modes as a function of temperature. It was found that conformationally preferred hydrogen- bonding modes maintain constant intensities over the wide temperature ranges studied for both polybenzoxazines and a novolac-type phenolic resin. In particular, the O— — —H— — —N hydrogen bond shows strong bonding that does not change over the temperature range. On the other hand, statistically distributed hydrogen bonding is more sensitive to the temperature change and its infrared intensities start decreasing around the β-transition of polybenzoxazines. The unusual physical and mechanical properties of polybenzoxazines, including volumetric expansion upon polymerization, high moduli, and high glass transition temperatures, are explained based on the complex hydrogen bonding. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 1299–1306, 1998     

Effect of bisphenol A on the miscibility,phase morphology,and specific interaction in immiscible biodegradable poly(ε‐caprolactone)/poly(L‐lactide) blends

We have investigated the enhancement in miscibility, upon addition of bisphenol A (BPA) of immiscible binary biodegradable blends of poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) (PLLA). That BPA is miscible with both PCL and PLLA was proven by the single value of T_g observed by differential scanning calorimetry (DSC) analyses over the entire range of compositions. At various compositions and temperatures, Fourier transform infrared spectroscopy confirmed that intermolecular hydrogen bonding existed between the hydroxyl group of BPA and the carbonyl groups of PCL and PLLA. The addition of BPA enhances the miscibility of the immiscible PCL/PLLA binary blend and transforms it into a miscible blend at room temperature when a sufficient quantity of the BPA is present. In addition, optical microscopy (OM) measurements of the phase morphologies of ternary BPA/PCL/PLLA blends at different temperatures indicated an upper critical solution temperature (UCST) phase diagram, since the ΔK effect became smaller at higher temperature (200°C) than at room temperature. An analysis of infrared spectra recorded at different temperatures correlated well with the OM analyses. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1146–1161, 2006     

Highly Active and Enantioselective Rhodium‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acid to α,β‐ Unsaturated Ketone by using Electron‐Poor MeO‐F12‐BIPHEP

The asymmetric 1,4‐addition of phenylboronic acid to cyclohexenone were performed by using a low amount of rhodium/(R)‐(6,6′‐dimethoxybiphenyl‐2,2′‐diyl)bis[bis(3,4,5‐trifluorophenyl)phosphine] (MeO‐F₁₂‐BIPHEP) catalyst. Because the catalyst shows thermal resistance at 100 °C, up to 0.00025 mol% Rh catalyst showed good catalytic activity. The highest turnover frequency (TOF) and turnover number (TON) observed were 53,000 h⁻¹ and 320,000, respectively. The enantioselectivities of the products were maintained at a high level of 98% ee in these reactions. The Eyring plots gave the following kinetic parameters (ΔΔH^≠=−4.0±0.1 kcal mol⁻¹ and ΔΔS^≠=−1.3±0.3 cal mol⁻¹ K⁻¹), indicating that the entropy contribution is relatively small. Both the result and consideration of the transition state in the insertion step at the B3LYP/6‐31G(d) [LANL2DZ for rhodium] levels indicated that the less σ‐donating electron‐poor (R)‐MeO‐F₁₂‐BIPHEP could be creating a rigid chiral environment around the rhodium catalyst even at high temperature.     

Infrared spectroscopic studies of a nematic liquid crystalline poly(ester amide) in the solid phase

Infrared spectroscopy has been used to study the hydrogen bonding conditions in a nematic liquid crystalline poly(ester amide). The results showed that the material formed interchain hydrogen bonding as a result of the inclusion of amide groups in the polymer chains. The hydrogen bonding was found to be stable in the temperature range studied (up to 150°C). However, the studies suggested that the hydrogen bond strength was weaker than in polyamide and did not appear to affect the mechanical properties of the material significantly.     

Imidazolium Ion‐Tagged Proline Organocatalyst for α‐Aminoxylation of Aldehydes and Ketones in Ionic Liquids

A novel imidazolium ion‐tagged L ‐proline catalyst has been developed. The asymmetric α‐aminoxylation of aldehydes and ketones with excellent enantioselectivities, up to 99% ee, and high yields in ionic liquids has been achieved. The system can be easily recycled and reused for at least six times without significant loss of yields and enantioselectivity.     

Detecting Bacterial Cell Viability in Few µL Solutions from Impedance Measurements on Silicon-Based Biochips

Using two different types of impedance biochips (PS5 and BS5) with ring top electrodes, a distinct change of measured impedance has been detected after adding 1–5 µL (with dead or live Gram-positive Lysinibacillus sphaericus JG-A12 cells to 20 µL DI water inside the ring top electrode. We relate observed change of measured impedance to change of membrane potential of L. sphaericus JG-A12 cells. In contrast to impedance measurements, optical density (OD) measurements cannot be used to distinguish between dead and live cells. Dead L. sphaericus JG-A12 cells have been obtained by adding 0.02 mg/mL of the antibiotics tetracycline and 0.1 mg/mL chloramphenicol to a batch with OD0.5 and by incubation for 24 h, 30 °C, 120 rpm in the dark. For impedance measurements, we have used batches with a cell density of 25.5 × 10⁸ cells/mL (OD8.5) and 270.0 × 10⁸ cells/mL (OD90.0). The impedance biochip PS5 can be used to detect the more resistive and less capacitive live L. sphaericus JG-A12 cells. Also, the impedance biochip BS5 can be used to detect the less resistive and more capacitive dead L. sphaericus JG-A12 cells. An outlook on the application of the impedance biochips for high-throughput drug screening, e.g., against multi-drug-resistant Gram-positive bacteria, is given.     

Lipid adsorption on commercial silica hydrogels from hexane and changes in triglyceride complexes with time

The structures of and lipid complexes with two commercial silica hydrogels (Trisyl and Sorbsil 40), which contain about 60% moisture, were examined by diffuse reflectance Fourier transform infrared spectroscopy. The spectra suggested that Trisyl contained less moisture than Sorbsil 40. However, the silanol groups of Sorbsil 40 were more active in adsorbing oleic acid, triglyceride, and phosphatidylcholine (PC) from hexane than those of Trisyl. Both adsorbents strongly bound PC through the PC carbonyl and phosphate groups. Lipid adsorption from hexane solution by Trisyl depended solely on trapped moisture, while Sorbsil 40 used moisture and silanol groups on the silica surface. Spectra of triglyceride-silica hydrogel complexes, obtained 24 and 72 h after obtaining the initial spectra, showed that Sorbsil 40 adsorption was by Van der Waals forces, but the triglyceride reoriented over time with an increase in hydrogen bonding. In contrast, Trisyl initially adosorbed triglyceride by hydrogen bonding which was stable for at least 72 h.     

A vibrational study of phase transitions in Fe2P2O7 and Cr2P2O7 under high‐pressures

The vibrational properties of synthetic iron diphosphate (Fe₂P₂O₇) and chromium diphosphate (Cr₂P₂O₇) are studied under high‐pressure conditions between ~22 and ~30 GPa, respectively. Each compound's structural response to pressure and pressure‐induced phase transitions are characterized. The chromium‐bearing sample shows coalescence of infrared bands occurring near 6 and 17 GPa: these may be associated with increases in the local symmetry of the P₂O₇ group. The iron sample undergoes a first‐order phase transition near ~9 GPa, and a possible phase transition near 5.5 GPa. At 9 GPa, the initially single, strong symmetric PO₄ stretching mode splits into four modes, and the sole asymmetric PO₄ stretching mode splits into two bands. These changes indicate the presence of multiple tetrahedral environments within a larger volume unit cell, and the relative frequencies of the split vibrations indicate a P₂O₇ environment with a markedly narrowed P–O–P angle. The difference between the behavior of the iron and chromium compounds is probably generated by the smaller iron ion producing a discontinuous decrease in the P–O–P angle at lower pressures than in the analogous chromium compound. Our results demonstrate that the dimerized P₂O₇ group remains stable under compression to over 20‐30 GPa at 300 K.     

A Recyclable Organocascade Reaction System: Stereoselective Precipitation of Optically Active cis‐δ‐Lactols with Quaternary Stereocenters during the Michael–Hemiacetalization Reaction

A cascade Michael–hemiacetalization reaction between β‐substituted β‐nitroethanols and α,β‐unsaturated aldehydes is described, which provides a convenient and efficient synthesis for cis‐δ‐lactols with quaternary stereocenters in moderate yields with excellent enantioselectivity. Based on the selective precipitation of cis‐δ‐lactols, which were isolated by filtration, the catalytic system in the filtrate can be reused directly and recycled for eight times without any obvious deterioration in enantioselectivity.     

Characterization of hydrogels prepared by the γ irradiation of aqueous solutions of acrylamide and N‐vinyl‐2‐pyrrolidone comonomers

Copolymer hydrogels were prepared through the γ irradiation of aqueous solutions composed of different ratios of acrylamide (AAm) and vinyl pyrrolidone (VP) monomers. The chemical structure, thermal stability, and structural morphology of the hydrogels were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy, respectively. The IR spectroscopy analysis showed the formation of copolymerization and the presence of hydrogen bonding. The TGA study showed that the AAm/VP‐based hydrogels possessed higher thermal stability than polyacrylamide (PAAm). However, the thermal stability of the AAm/VP hydrogels increased with an increasing ratio of the VP component. The study of the swelling kinetics in water showed that all the hydrogels reached the equilibrium state after 24 h. However, the AAm/VP‐based hydrogels showed swelling in water that was lower than that of the hydrogel based on pure AAm. Meanwhile, the degree of swelling of the AAm/VP‐based hydrogels decreased with an increasing ratio of VP in the feeding solutions. The results showed that the PAAm and AAm/VP‐based hydrogels prepared at 50 kGy were affected by a change in the temperature around 25°C, whereas the hydrogels prepared at 25 kGy did not show this characteristic. However, the hydrogels prepared at different doses displayed reversible pH character. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of an oxygen‐ion beam (O+7, 100 MeV) and γ irradiation on polypyrrole films

Nanostructured polypyrrole films doped with para‐toluene sulfonic acid were prepared by an electrochemical process, and a comparative study of the effects of swift heavy ions and γ‐ray irradiation on the structural and optical properties of the polypyrrole was carried out. Oxygen‐ion (energy = 100 MeV, charge state = +7) fluence varied from 1 × 10¹⁰ to 3 × 10¹² ions/cm², and the γ dose varied from 6.8 to 67 Gy. The polymer films were characterized by X‐ray diffraction, ultraviolet–visible spectroscopy, and scanning electron microscopy. The X‐ray diffraction pattern showed that after irradiation, the crystallinity improved with increasing fluence because of an increase in the crystalline regions dispersed in an amorphous phase. The ultraviolet–visible spectra showed a shift in the absorbance edge toward higher wavelengths, which indicated a significant decrease in the band gap of the polypyrrole film after irradiation. The scanning electron microscopy study showed a systematic change in the surface of the polymer. A similar pattern was observed with the γ irradiation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel FTIR method for determining the crystallinity of poly(ε‐caprolactone)

By employing Fourier transform infrared spectroscopy (FTIR) and curve–fitting techniques, the degree of crystallinity of poly(ε‐caprolactone) (PCL) aged at room temperature for 1 month was estimated to be 49 ± 2 %. The degree of crystallinity determined by FTIR in this work is comparable with those found by other conventional techniques. It is suggested that the FTIR procedure established here for the crystallinity determination of PCL should also be suitable for the quantitative analysis of solid‐state morphology of polymers containing carbonyl or other functional groups. © 2000 Society of Chemical Industry     

Asymmetric Solvation of the Zinc Dimer Cation Revealed by Infrared Multiple Photon Dissociation Spectroscopy of Zn2+(H2O)n (n = 1–20)

Investigating metal-ion solvation—in particular, the fundamental binding interactions—enhances the understanding of many processes, including hydrogen production via catalysis at metal centers and metal corrosion. Infrared spectra of the hydrated zinc dimer (Zn₂⁺(H₂O)_n; n = 1–20) were measured in the O–H stretching region, using infrared multiple photon dissociation (IRMPD) spectroscopy. These spectra were then compared with those calculated by using density functional theory. For all cluster sizes, calculated structures adopting asymmetric solvation to one Zn atom in the dimer were found to lie lower in energy than structures adopting symmetric solvation to both Zn atoms. Combining experiment and theory, the spectra show that water molecules preferentially bind to one Zn atom, adopting water binding motifs similar to the Zn⁺(H₂O)_n complexes studied previously. A lower coordination number of 2 was observed for Zn₂⁺(H₂O)₃, evident from the highly red-shifted band in the hydrogen bonding region. Photodissociation leading to loss of a neutral Zn atom was observed only for n = 3, attributed to a particularly low calculated Zn binding energy for this cluster size.     

Molecular size evaluation of linear and branched paraffins from the gasoline pool by DFT quantum chemical calculations

A good approach of the critical molecular dimensions of 35 linear and branched C5-C8 paraffins by DFT quantum chemical calculations at B3LYP/6-31G** level of theory in gas phase is described. In this context, we found that either the determined molecular width or width-height average values can be used as critical measures in the analysis for selection of molecular sieves materials, depending on their pore size and shape. The molecular width values for linear and monosubstituted paraffins are 4.2 and 5.5 Å, respectively. In the case of disubstituted paraffins, the values are 5.5 Å for 2,3-, 2,4-, 2,5- and 3,4-disubstituted and for 2,2- and 3,3-disubstituted are 6.7-7.1 Å. The values for ethyl-substituted are 6.1-6.7 Å and for trisubstituted isoparaffins are 6.7. In order to select a porous material for selective separation of isoparaffins and paraffins, the zeolite diffusivity can be correlated with the critical diameter of the paraffins according to the geometry-limited diffusion concept and the effective minimum dimensions of the molecules. The calculated values of CPK molecular volume of the titled paraffins showed a good discrimination between the number of carbons and molecular size.     

红外光谱及其在甲壳素化学研究领域的应用

介绍了红外光谱产生的原理、红外光谱仪、红外光谱图及其解析,综述了红外光谱在甲壳素化学研究领域定性分析、定量分析和分子结构测定方面的应用。利用红外光谱对甲壳素及衍生物进行结构表征方便易行,能够说明官能团的存在,但是对于整体结构表征而言并不充分,实际中往往还需辅以其它表征手段。