Density functional theory study on hydrogen storage capacity of yttrium decorated graphyne nanotube

The hydrogen storage capacity of yttrium decorated graphyne nanotubes is calculated using spin polarized DFT method. The stabilities, electronic properties and the structures of Y attachment on graphyne tube are investigated. It is revealed that Y can be separately adsorbed on graphyne tube with the binding energy of 6.76 eV and the clustering of metal atoms is hindered. The geometry optimization shows that Y atoms decorated graphyne tube can capture 42H₂ molecules through Dewar-Kubas like interaction and the polarization under the electrostatic potential formed by Y and graphyne tubes. The weight percent capacity is 5.71 wt%, with an average hydrogen adsorption energy of −0.153 eV per H₂, indicating its potential application on hydrogen storage candidates.     

Potassium decorated γ-graphyne as hydrogen storage medium: Structural and electronic properties

Different sites for K adsorption in γ-graphyne were investigated using density functional theory (DFT) calculations and optical and structural properties of the structures were examined. For the most stable structures, we put one H₂ molecule in different directions on the various sites to evaluate the hydrogen adsorption capability of them. Then, one to nine H₂ molecules in sequence were added to the best structure. Results show that clustering of the K atoms is hindered on the graphyne surface and the most desirable adsorption site for K atom is the hollow site of 12-membered ring with adsorption energy of 5.86 eV. Also, this site is the best site for H₂ adsorption onto K-decorated graphyne with E_das of −0.212 eV. Adding of number of H₂ molecule on this site shows that K atom can bind nine H₂ molecules at one side of the graphyne with the average adsorption energy of 0.204 eV/H₂. Therefore, for one side ca. 8.95 wt % and for both sides of the graphyne with a K atom in each side ca. 13.95 wt % of the hydrogen storage capacity can be achieved. This study shows that K-decorated graphyne can be a promising candidate for the hydrogen storage applications.     

Computational insights of alkali metal (Li / Na / K) atom decorated buckled bismuthene for hydrogen storage

The mechanism of hydrogen molecule adsorption on 2D buckled bismuthene (b-Bi) monolayer decorated with alkali metal atoms was studied using density functional theory based first principles calculations. The decorated atoms Li, Na and K exhibited distribution on surface of b-Bi monolayer with increasing binding energy of 2.6 eV, 2.9 eV and 3.6 eV respectively. The adsorption of H₂ molecule on the slabs appeared stable which was further improved upon inclusion of van der Waals interactions. The adsorption behaviour of H₂ molecules on the decorated slabs is physisorption whereas the slabs were able to bind up to five H₂ molecules. The average adsorption energy per H₂ molecules are in range of 0.1–0.2 eV which is good for practical applications. The molecular dynamics simulation also confirmed the thermodynamic stabilities of five H₂ molecules adsorbed on the decorated slabs. The storage capacity values are found 2.24 wt %, 2.1 wt %, and 2 wt %, for respective cases of Li, Na and K atoms decorated b-Bi. The analysis of the adsorbed cases pointed to electrostatic interaction of Li and H₂ molecule. The adsorption energies, binding energies, charge analysis, structural stability, density of states, and hydrogen adsorption percentage specifies that the decorated b-Bi may serve as an efficient hydrogen storage material and could be an effective medium to interact with hydrogen molecules at room temperature.     

Hydrogen storage using Na-decorated graphyne and its boron nitride analog

Na-decorated single- and double-sided graphyne and their BN analogs have been proposed to be promising hydrogen storage candidates. The structural stability of metal/graphyne and metal/BN and the metal adsorption sites on the layers were studied in virtue of density-functional theory calculations. Hydrogen storage behaviors on the complexes were investigated. The calculated results demonstrated that each Na atom could attach at most three hydrogen molecules without any dissociation of molecule structures. For Na-decorated double-sided graphyne and BN analog, the hydrogen storage capacities could reach to 5.98 and 5.84 wt%, with the average adsorption energies of −0.25 and −0.17 eV/H₂, respectively. The hydrogen binding mechanisms are unrevealed by analyzing the charge transfer and density of states of the systems.     

Superalkali NLi4 decorated graphene: A promising hydrogen storage material with high reversible capacity at ambient temperature

This paper investigates the decoration of superalkali NLi₄ on graphene and the hydrogen storage properties by using first principles calculations. The results show that the NLi₄ units can be stably anchored on graphene while the Li atoms are strongly bound together in the superalkali clusters. Decoration using the superalkali clusters not only solve the aggregation of metal atoms, it also provide more adsorption sites for hydrogen. Each NLi₄ unit can adsorb up to 10 H₂ molecules, and the NLi₄ decorated graphene can reach a hydrogen storage capacity 10.75 wt% with an average adsorption energy ?0.21 eV/H₂. We also compute the zero-point energies and the entropy change upon adsorption based on the harmonic frequencies. After considering the entropy effect, the adsorption strengths fall in the ideal window for reversible hydrogen storage at ambient temperatures. So NLi₄ decorated graphene can be promising hydrogen storage material with high reversible storage capacities.     

High-capacity reversible hydrogen storage in scandium decorated holey graphyne: Theoretical perspectives

We have investigated the hydrogen storage capabilities of scandium decorated holey graphyne, a recently synthesized carbon allotrope, by applying density functional theory and molecular dynamics simulations. We have observed that one unit cell of holey graphyne can adsorb 6 Sc atoms, and each Sc atom can adsorb up to 5H₂ molecules with an average binding energy and average desorption temperature of ?0.36 eV/H₂ and 464 K, respectively. The gravimetric weight percentage of hydrogen is 9.80%, which is considerably higher than the Department of Energy, United-States requirements of 6.5%. We have found that a total amount of 1.9e charge transfers from the 3d and 4s orbitals of Sc atom to the C-2p orbitals of holey graphyne by performing the Bader charge analysis. Hydrogen molecules are bonded with the scandium atom by Kubas interactions. The ab-initio molecular dynamics simulations confirm the structural integrity of scandium decorated holey graphyne system at the high desorption temperatures. The presence of sufficient diffusion energy barriers for the Sc atom ensure the avoidance of metal-metal clustering in the system.     

Li-decorated graphyne as high-capacity hydrogen storage media: First-principles plane wave calculations

Taking into account the van der Waals correction, the characteristics of the Li-decorated graphyne as the hydrogen storage medium have been explored using first-principles plane wave calculations. We find that Li atom can be adsorbed not only over the center of large hexagon (H_L site) but also over the center of small hexagon (H_S site). For double-side Li decorations, there are 14H₂ molecules can be adsorbed on Li-decorated graphyne primitive cell with the adsorption energy of 0.19 eV/H₂. As a result, the hydrogen storage capacity of 13.0 wt% can be obtained. This suggests that the Li-decorated graphyne system can serve as a high-capacity hydrogen storage medium.     

Li decorated penta-silicene as a high capacity hydrogen storage material: A density functional theory study

The H₂ adsorption characteristics of Li decorated single-sided and double-sided penta-silicene are predicted via density functional theory (DFT). The orbital hybridization results in Li atom strongly bind onto the surface of the penta-silicene with a large binding energy and it keeps the decorated Li atoms from aggregation. Moreover, Li decorated double-sided penta-silicene can store up to 12H₂ molecules with the average hydrogen adsorption energy of ?0.220 eV/H₂ and hydrogen uptake capacity of 6.42 wt%, respectively. The ab initio molecular dynamics (AIMD) simulations demonstrate the H₂ molecules are released gradually from the substrate material with the increasing simulation time and the calculated desorption temperature T_D is 281 K in the suitable operating temperature range. Our explorations confirm that Li decorated penta-silicene can be regarded as a promising hydrogen storage candidate for hydrogen storage applications.     

Ultrahigh reversible hydrogen storage in K and Ca decorated 4-6-8 biphenylene sheet

By applying density functional theory (DFT) and ab-initio molecular dynamics (AIMD) simulations, we predict the ultrahigh hydrogen storage capacity of K and Ca decorated single-layer biphenylene sheet (BPS). We have kept various alkali and alkali-earth metals, including Na, Be, Mg, K, Ca, at different sites of BPS and found that K and Ca atoms prefer to bind individually on the BPS instead of forming clusters. It was found that 2?2?1 supercell of biphenylene sheet can adsorb eight K, or eight Ca atoms, and each K or Ca atom can adsorb 5H_2, leading to 11.90% or 11.63% of hydrogen uptake, respectively, which is significantly higher than the DOE-US demands of 6.5%. The average adsorption energy of H₂ for K and Ca decorated BPS is ?0.24 eV and ?0.33 eV, respectively, in the suitable range for reversible H₂ storage. Hydrogen molecules get polarized in the vicinity of ionized metal atoms hence get attached to the metal atoms through electrostatic and van der Waals interactions. We have estimated the desorption temperatures of H₂ and found that the adsorbed H₂ can be utilized for reversible use. We have found that a sufficient energy barrier of 2.52 eV exists for the movement of Ca atoms, calculated using the climbing-image nudged elastic band (CI-NEB) method. This energy barrier can prevent the clustering issue of Ca atoms. The solidity of K and Ca decorated BPS structures were investigated using AIMD simulations.     

Hydrogen adsorption on Li decorated graphyne-like carbon nanosheet: A density functional theory study

Motivated by novel graphyne-like carbon nanostructure C₆₈-GY, spin-polarized DFT calculations with dispersion-correction were performed to investigate the hydrogen adsorption capacity of Li decorated C₆₈-GY nanosheet. The binding energy between Li and C₆₈-GY was larger than the cohesive energy of bulk metal, indicating Li atoms would prefer to separately attached on C₆₈-GY. The ab initio molecular dynamics simulation has been performed to confirm the stability of Li/C complex. When five Li atoms decorated on C₆₈-GY, 14H₂ molecules were captured. The maximum hydrogen storage density was 8.04 wt% with an average hydrogen adsorption energy of −0.227 eV per H₂. The positively charged Li atoms aroused electrostatic field and induced the polarization of H₂. It was notable to observe strong hybridization between the main peak of H-1s orbitals with Li below Fermi level, which was responsible for the enhancement of hydrogen binding energy, indicating its potential application on hydrogen storage.     

Metal adatoms-decorated silicene as hydrogen storage media

Hydrogen storage properties of 10 different adatom decorated silicene are carried out using density functional theory calculations with long-range van der Waals dispersion correction. It is found that the binding energy between metal adatoms and the silicene is greater than the cohesive energy of bulk metal so that clustering of adatom will not occur once it is bonded with silicene. The adsorption of H₂ on Li, Na, K, Mg, Ca, and Au decorated silicene is a weak physisorption. Differently, a weaker chemisorption is responsible for the adsorption of H₂ on Be, Sc, Ti, and V decorated silicene. In particular, silicene with Na, K, Mg, and Ca decorating on both sides leads to 7.31–9.40 wt% hydrogen storage capacity with desirable adsorption energy, indicating that the metal-decorated silicene can serve as a high capacity hydrogen storage medium.     

Hydrogen storage of dual-Ti-doped single-walled carbon nanotubes

The hydrogen adsorption capacity of dual-Ti-doped (7, 7) single-walled carbon nanotube (Ti-SWCNTs) has been studied by the first principles calculations. Ti atoms show different characters at different locations due to local doping environment and patterns. The dual-Ti-doped SWCNTs can stably adsorb up to six H₂ molecules through Kubas interaction at the Ti₂ active center. The intrinsic curvature and the different doping pattern of Ti-SWCNTs induce charge discrepancy between these two Ti atoms, and result in different hydrogen adsorption capacity. Particularly, eight H₂ molecules can be adsorbed on both sides of the dual-Ti decorated SWCNT with ideal adsorption energy of 0.198 eV/H₂, and the physisorption H₂ on the inside Ti atom has desirable adsorption energy of 0.107 eV/H₂, ideal for efficient reversible storage of hydrogen. The synergistic effect of Ti atoms with different doping patterns enhances the hydrogen adsorption capacity 4.5H₂s/Ti of the Ti-doped SWCNT (VIII), and this awaits experimental trial.     

A density functional theory and grand canonical Monte Carlo simulations study the hydrogen storage on the Li-decorated net-τ

To find ideal hydrogen storage media, hydrogen storage performance of Li decorated net-τ has been investigated by first-principles calculations. Maximum 6 Li atoms are adsorbed on net-τ, with the average binding energy of 2.15 eV for per Li atom. Based on 6Li-decorated net-τ, up to twenty H₂ molecules are adsorbed, with a high H₂ storage capacity of 12.52 wt% and an appropriate adsorption energy of 0.21 eV/H₂. Finally, H₂ uptake performance is measured by GCMC simulations. Our results suggest that Li-decorated net-τ may be a promising hydrogen storage medium under realistic conditions.     

Density functional theory study of reversible hydrogen storage in monolayer beryllium hydride by decoration with boron and lithium

The hydrogen storage capacity of M-decorated (M = Li and B) 2D beryllium hydride is investigated using first-principles calculations based on density functional theory. The Li and B atoms were calculated to be successfully and chemically decorated on the Surface of the α-BeH₂ monolayer with a large binding energy of 2.41 and 4.45eV/atom. The absolute value was higher than the cohesive energy of Li and B bulk (1.68, 5.81eV/atom). Hence, the Li and B atoms are strongly bound on the beryllium hydride monolayer without clustering. Our findings show that the hydrogen molecule interacted weakly with B/α-BeH₂(B-decorated beryllium hydride monolayer) with a low adsorption energy of only 0.0226 eV/H₂ but was strongly adsorbed on the introduced active site of the Li atom in the decorated BeH₂ with an improved adsorption energy of 0.472 eV/H₂. Based on density functional theory, the gravimetric density of 28H₂/8li/α-BeH₂) could reach 14.5 wt.% higher than DOE's target of 6.5 wt. % (the criteria of the United States Department of Energy). Therefore, our research indicates that the Li-decorated beryllium hydride monolayer could be a candidate for further investigation as an alternative material for hydrogen storage.     

The enhancement of hydrogen storage capacity in Li,Na and Mg-decorated BC3 graphene by CLICH and RICH algorithms

New hydrogen adsorption states on Li, Na, and Mg-decorated graphene-type BC₃ sheet have been investigated by first-principles calculations. The structural, electronic and binding properties, metal binding and nH₂ (n = 1–10) adsorption states of these systems are studied in detail with the Mulliken analysis, charge density differences, and partial density of states. To enhance the number of the adsorbed H₂ molecules per metal atom, and also to generate the better initial coordinates for reducing the simulation time, we present two masthematical algorithms (CLICH and RICH). The tested results on BC₃ sheet and boron-doped graphene (C₃₀B₂) show that these algorithms can increase the number of adsorbed hydrogen molecules by minimizing the computational time. It is seen that nH₂ (n = 1–10) adsorbed Li,/Na and/Mg-decorated BC₃ single- and double-sided systems are industrial materials for hydrogen storage technology, their adsorption energies fall into the acceptable adsorption energy range (0.20–0.60 eV/H₂). It is concluded from the optimized geometries and charge density differences for the higher number of H₂ adsorbed systems that not only decorated metal atom but also the sheet plays an important role in hydrogen storage process, because the boron atoms in the sheet expand the induced electric field between the adatoms and BC₃ sheet. From Mulliken analysis, there is a charge transfer mechanism between H₂ molecules and metal atoms. Moreover, the resonant peaks for the sheet, metal atoms and H₂ molecules in partial density of states curves indicate the possible hybridizations. Additionally, these adsorption processes are supported by charge density difference plots.     

Computational evaluation of Ca-decorated nanoporous CN monolayers as high capacity and reversible hydrogen storage media

Developing novel materials with high-capacity and reversible properties for storing hydrogen (H₂) is crucial for energy treatments. We here investigated comprehensively the H₂ storage performance of the Ca-decorated g-CN (Ca@CN) monolayers using first-principles calculations. The Ca atoms can be uniformly decorated into the center of the pores of g-CN monolayers without aggregation. The Ca@CN monolayer has an average H₂ adsorption energy of around 0.163–0.228 eV as well as high H₂ storage capacity of 10.1 wt%. The stabilities of the H₂ adsorption systems are confirmed by high hardness and low electrophilicity. The temperature of desorption is anticipated to be near the room temperature and ideal for fuel cell devices. The thermodynamic analysis along with desorption temperature reveal that the Ca@CN monolayer has promising potentials as reversible and high capacity hydrogen storage materials (HSM), which will motivate experimental efforts to synthesize the high-efficient HSM.     

Hydrogen storage capacities of alkali and alkaline-earth metal atoms on SiC monolayer: A first-principles study

A detailed theoretical Density-Functional-Theory-based investigation of hydrogen adsorption on silicon carbide monolayers (SiC-ML) decorated with alkali and alkaline-earth metal atoms is presented. The results show that the favourable position for all adsorbed metal atoms is above a Si atom. These metal atoms are chemisorbed to the SiC-ML, except for Mg which is physisorbed. The adsorbed atoms act in turn as adsorption sites for H₂ molecules. The single-sided K-functionalized SiC-ML can store up to six H₂ molecules. For double-side K-decorated SiC-ML, up to ten H₂ molecules can be captured. In all cases, the H₂ molecules are physisorbed. This is beneficial because the breaking of chemical bonds, which otherwise would be needed to make use of the stored H₂, is energetically expensive. These results find decorated SiC-ML as a promising material for hydrogen storage systems.     

Computational Evaluation of Li-doped g-C2N Monolayer as Advanced Hydrogen Storage Media

The emerging 2D g-C₂N obtained increasingly more popularity in functional materials design, and its natural porosity can easily accommodate metal atoms, making itself more suitable for energy gases storage. In this study, we employed DFT computational studies to systematically solve the electronic structure of Li-doped g-C₂N monolayer, and evaluate its performance in hydrogen storage. In our calculations, we found that each pore of g-C₂N can adsorb at most three Li atoms that bind with pyridinic N atoms. We also noticed that considerable amount of charges were transferred from the adsorbed Li to the pristine materials, potentially enhancing its overall conductivity. The change of electronic structure also leads to its improved performance in H₂ adsorption, due to the fact that the electrostatic interactions between the adsorbed H₂ and Li can be largely enhanced. The optimised configurations of the Li-doped g-C₂N with multiple adsorbed H₂ molecules were presented, and the fundamental mechanisms of adsorption were also investigated in details. The highest storage capacity of hydrogen by Li-doped g-C₂N can reach to 7.8 wt%, much higher than the target value of 5.5 wt %, defined by the U.S department of energy (DOE). Moreover, except Li, we also found that the nitrogen atoms or the N-C bonds can also serve as active adsorption sites. The computational explorations conducted in this study actually indicates a promising prospect of alkali metals decorated 2D materials in the area of hydrogen storage; and we believe the performance of these kinds of novel materials can be further enhanced via more decent modifications.     

Study of the reversible hydrogen storage performance of Ti-decorated hexagonal B36 by DFT calculations with van der Waals corrections

In this work, we report on the study of the hydrogen storage capability of titanium (Ti) decorated B₃₆ nanosheets using density functional theory (DFT) calculations with van der Waals corrections. Ti atoms are strongly bonded to the surface of B₃₆ with a binding energy of 6.23 eV, which exceeds the bulk cohesive energy of crystalline Ti. Ti-decorated B₃₆ (2Ti@B₃₆) can reversibly adsorb up to 12 H₂ molecules with a hydrogen storage capacity of 4.75 wt % and average adsorption energy between 0.361 and 0.674 eV/H₂. The values of desorption temperature and the results of molecular dynamics simulations enable to conclude that 2Ti@B₃₆ is a perspective reversible material for hydrogen storage under real conditions.