Biohydrogen production from beet molasses by sequential dark and photofermentation

Biological hydrogen production using renewable resources is a promising possibility to generate hydrogen in a sustainable way. In this study, a sequential dark and photofermentation has been employed for biohydrogen production using sugar beet molasses as a feedstock. An extreme thermophile Caldicellulosiruptor saccharolyticus was used for the dark fermentation, and several photosynthetic bacteria (Rhodobacter capsulatus wild type, R. capsulatus hup⁻ mutant, and Rhodopseudomonas palustris) were used for the photofermentation. C. saccharolyticus was grown in a pH-controlled bioreactor, in batch mode, on molasses with an initial sucrose concentration of 15 g/L. The influence of additions of NH₄⁺ and yeast extract on sucrose consumption and hydrogen production was determined. The highest hydrogen yield (4.2 mol of H₂/mol sucrose) and maximum volumetric productivity (7.1 mmol H₂/L_c.h) were obtained in the absence of NH₄⁺. The effluent of the dark fermentation containing no NH₄⁺ was fed to a photobioreactor, and hydrogen production was monitored under continuous illumination, in batch mode. Productivity and yield were improved by dilution of the dark fermentor effluent (DFE) and the additions of buffer, iron-citrate and sodium molybdate. The highest hydrogen yield (58% of the theoretical hydrogen yield of the consumed organic acids) and productivity (1.37 mmol H₂/L_c.h) were attained using the hup⁻ mutant of R. capsulatus. The overall hydrogen yield from sucrose increased from the maximum of 4.2 mol H₂/mol sucrose in dark fermentation to 13.7 mol H₂/mol sucrose (corresponding to 57% of the theoretical yield of 24 mol of H₂/mole of sucrose) by sequential dark and photofermentation.     

Biological hydrogen production by extremely thermophilic novel bacterium Thermoanaerobacter mathranii A3N isolated from oil producing well

Hydrogen producing novel bacterial strain was isolated from formation water from oil producing well. It was identified as Thermoanaerobacter mathranii A3N by 16S rRNA gene sequencing. Hydrogen production by novel strain was pH and substrate dependent and favored pH 8.0 for starch, pH 7.5 for xylose and sucrose, pH 8.0–9.0 for glucose fermentation at 70 °C. The highest H₂ yield was 2.64 ± 0.40 mol H₂ mol glucose at 10 g/L, 5.36 ± 0.41 mol H₂ mol – sucrose at 10 g/L, 17.91 ± 0.16 mmol H₂ g – starch at 5 g/L and 2.09 ± 0.21 mol H₂ mol xylose at 5 g/L. The maximum specific hydrogen production rates 6.29 (starch), 9.34 (sucrose), 5.76 (xylose) and 4.89 (glucose) mmol/g cell/h. Acetate-type fermentation pathway (approximately 97%) was found to be dominant in strain A3N, whereas butyrate formation was found in sucrose and xylose fermentation. Lactate production increased with high xylose concentrations above 10 g/L.     

Fermentative hydrogen production by new marine Clostridium amygdalinum strain C9 isolated from offshore crude oil pipeline

The present study investigated hydrogen production potential of novel marine Clostridium amygdalinum strain C9 isolated from oil water mixtures. Batch fermentations were carried out to determine the optimal conditions for the maximum hydrogen production on xylan, xylose, arabinose and starch. Maximum hydrogen production was pH and substrate dependant. The strain C9 favored optimum pH 7.5 (40 mmol H₂/g xylan) from xylan, pH 7.5–8.5 from xylose (2.2–2.5 mol H₂/mol xylose), pH 8.5 from arabinose (1.78 mol H₂/mol arabinose) and pH 7.5 from starch (390 ml H₂/g starch). But the strain C9 exhibited mixed type fermentation was exhibited during xylose fermentation. NaCl is required for the growth and hydrogen production. Distribution of volatile fatty acids was initial pH dependant and substrate dependant. Optimum NaCl requirement for maximum hydrogen production is substrate dependant (10 g NaCl/L for xylose and arabinose, and 7.5 g NaCl/L for xylan and starch).     

Impact of regulated pH on proto scale hydrogen production from xylose by an alkaline tolerant novel bacterial strain, Enterobacter cloacae DT-1

A hydrogen producing facultative anaerobic alkaline tolerant novel bacterial strain was isolated from crude oil contaminated soil and identified as Enterobacter cloacae DT-1 based on 16S rRNA gene sequence analysis. DT-1 strain could utilize various carbon sources; glycerol, CMCellulose, glucose and xylose, which demonstrates that DT-1 has potential for hydrogen generation from renewable wastes. Batch fermentative studies were carried out for optimization of pH and Fe²⁺ concentration. DT-1 could generate hydrogen at wide range of pH (5–10) at 37 °C. Optimum pH was; 8, at which maximum hydrogen was obtained from glucose (32 mmol/L), when used as substrate in BSH medium containing 5 mg/L Fe²⁺ ion. Decrease in hydrogen partial pressure by lowering the total pressure in the fermenter head space, enhanced the hydrogen production performance of DT-1 from 32 mmol H₂/L to 42 mmol H₂/L from glucose and from 19 mmol H₂/L to 33 mmol H₂/L from xylose. Hydrogen yield efficiency (HY) of DT-1 from glucose and xylose was 1.4 mol H₂/mol glucose and 2.2 mol H₂/mol xylose, respectively. Scale up of batch fermentative hydrogen production in proto scale (20 L working volume) at regulated pH, enhanced the HY efficiency of DT-1 from 2.2 to 2.8 mol H₂/mol xylose (1.27 fold increase in HY from laboratory scale). 84% of maximum theoretical possible HY efficiency from xylose was achieved by DT-1. Acetate and ethanol were the major metabolites generated during hydrogen production.     

Enhanced bio-hydrogen production from sugarcane juice by immobilized Clostridium butyricum on sugarcane bagasse

Immobilized Clostridium butyricum TISTR 1032 on sugarcane bagasse improved hydrogen production rate (HPR) approximately 1.2 times in comparison to free cells. The optimum conditions for hydrogen production by immobilized C. butyricum were initial pH 6.5 and initial sucrose concentration of 25 g COD/L. The maximum HPR and hydrogen yield (HY) of 3.11 L H₂/L substrate·d and 1.34 mol H₂/mol hexose consumed, respectively, were obtained. Results from repeated batch fermentation indicated that the highest HPR of 3.5 L H₂/L substrate·d and the highest HY of 1.52 mol H₂/mol hexose consumed were obtained at the medium replacement ratio of 75% and 50% respectively. The major soluble metabolites in both batch and repeated batch fermentation were butyric and acetic acids.     

Hydrogen production by mixed bacteria through dark and photo fermentation

Mixed bacteria were used to improve hydrogen yield from cassava starch in combination of dark and photo fermentation. In dark fermentation, mixed anaerobic bacteria (mainly Clostridium species) were used to produce hydrogen from cassava starch. Substrate concentration, fermentation temperature and pH were optimized as 10.4 g/l, 31 °C and 6.3 by response surface methodology (RSM). The maximum hydrogen yield and production rate in dark fermentation were 351 ml H₂/g starch (2.53 mol H₂/mol hexose) and 334.8 ml H₂/l/h, respectively. In photo fermentation, immobilized mixed photosynthetic bacteria (PSB, mainly Rhodopseudomonaspalustris species) were used to produce hydrogen from soluble metabolite products (SMP, mainly acetate and butyrate) of dark fermentation. The maximum hydrogen yield in photo fermentation was 489 ml H₂/g starch (3.54 mol H₂/mol hexose). The total hydrogen yield was significantly increased from 402 to 840 ml H₂/g starch (from 2.91 to 6.07 mol H₂/mol hexose) by mixed bacteria and cell immobilization in combination of dark and photo fermentation.     

Improvement of hydrogen production under decreased partial pressure by newly isolated alkaline tolerant anaerobe, Clostridium butyricum TM-9A: Optimization of process parameters

A mesophilic alkaline tolerant fermentative microbe was isolated from estuarine sediment samples and designated as Clostridium butyricum TM-9A, based on 16S rRNA gene sequence. Batch experiments were conducted for investigation of TM-9A strain for its growth and hydrogen productivity from glucose, in an iron containing basal solution supplemented with yeast extract as organic nitrogen source. Hydrogen production started to evolve when cell growth entered exponential phase and reached maximum production rate at late exponential phase. Maximum hydrogen production was observed at 37 °C, initial pH of 8.0 in the presence of 1% glucose. Optimization of process parameters resulted in increase in hydrogen yield from 1.64 to 2.67 mol of H₂/mol glucose. Molar yield of H₂ increased further from 2.67 to 3.1 mol of H₂/mol of glucose with the decrease in hydrogen partial pressure, obtained by lowering the total pressure in the head space of the batch reactor. Acetate and butyrate were the measure volatile fatty acids generated during hydrogen fermentation. TM-9A strain produced hydrogen efficiently from a range of pentose and hexose sugars including di-, tri and poly-saccharides like; xylose, ribose, glucose, rhamnose, galactose, fructose, mannose, sucrose, arabinose, raffinose, cellulose, cellobiose and starch.     

Biohydrogen production from various feedstocks by Bacillus firmus NMBL-03

In present work our objective was to find out the potential substrates for fermentative hydrogen production using microbial culture of Bacillus firmus NMBL-03 isolated from municipal sludge. A wide variety of substrates (glucose, xylose, arabinose, lactose, sucrose, and starch) and carbohydrate rich waste products (bagasse hydrolysate, molasses, potato peel and cyanobacterial mass) have been used for dark fermentative hydrogen production. All studies were done at optimized physico-chemical conditions. Among all substrates glucose, arabinose, lactose, starch, molasses and bagasse hydrolysate were found to be the favorable substrates for hydrogen production. The highest VHPR i.e. 177.5 ± 7.07 ml/L.h (7.95 ± 0.29 mmol H₂/L.h) and maximum H₂ production (22.58 ± 2.65 mmol H₂/L) was achieved using starch as the substrate. The maximum yield 1.29 ± 0.11 mol H₂/mol reducing sugar was obtained from bagasse hydrolysate as substrate. Butyrate and acetate were detected as the end product in all the cases while lactate was also detected from glucose and cyanobacterial hydrolysate. Since considerable amount of H₂ also evolved when cyanobacterial mass was used, therefore this microbe can be exploited for hydrogen production through a three stage integrated system. Residual carbohydrate containing biomass left after cyanobacterial H₂ production can be utilized in dark fermentative H₂ production. Spent media obtained after dark fermentative H₂ production contain considerable amount of volatile fatty acids that can be potential substrate for photo fermentative H₂ production.     

Biological hydrogen production from sugar beet molasses by agar immobilized R. capsulatus in a panel photobioreactor

Biohydrogen production from sugar beet molasses was investigated by using agar immobilized R. capsulatus YO3. A panel photobioreactor (1.4 L) was employed for a long-term hydrogen production in both indoor and outdoor conditions. The impact of several initial molasses concentrations on hydrogen production, yield and productivity were assessed. Indoor studies revealed that initial sucrose concentration in molasses should be kept below 20 mM to prevent inhibition of hydrogen production. The highest hydrogen productivity of 0.64 ± 0.06 mmol H₂ L^?1 h^?1 and yield of 12.2 ± 1.5 mol H₂/mol sucrose were obtained in indoors throughout 20 days of operation. For outdoors, hydrogen production continued for 40 days including consecutive 10 rounds under natural outdoor conditions. In outdoor conditions, the maximum hydrogen productivity and yield were 0.79 ± 0.04 mmol H₂ L^?1 h^?1 and 5.2 ± 0.4 mol H₂/mol sucrose respectively. These results indicate that the proposed system is promising for biohydrogen production from molasses at large-scale natural conditions.     

Optimization of fermentative hydrogen production by Enterococcus faecium INET2 using response surface methodology

A newly isolated strain Enterococcus faecium INET2 was used as inoculum for biohydrogen production through dark fermentation. The individual and interactive effect of initial pH, operation temperature, glucose concentration and inoculation amount on the accumulation of hydrogen during fermentation was examined by a Box–Behnken Design (BBD), and hydrogen production process was analyzed at the optimal condition. A significant interactive effect between glucose concentration and pH was observed, the optimal condition was initial pH 7.1, operation temperature 34.8 °C, glucose concentration 11.3 g/L and inoculation amount 10.4%. Hydrogen yield, maximum hydrogen production rate and hydrogen production potential were determined to be 1.29 mol H₂/mol glucose, 86.7 L H₂/L/h and 1.35 L H₂/L. Metabolites analysis showed that E. faecium INET2 followed the pyruvate: formate lyase (Pfl) pathway in first 16 h, followed by the acetate-type fermentation and then shifted to butyrate-type fermentation. Maximum hydrogen production rate was accompanied with a quick formation of acetic acid.     

Dark fermentative hydrogen production from xylose by a hot spring enrichment culture

Dark fermentative hydrogen production by a hot spring culture was studied from different sugars in batch assays and from xylose in continuous stirred tank reactor (CSTR) with on-line pH control. Batch assays yielded hydrogen in following order: xylose > arabinose > ribose > glucose. The highest hydrogen yield in batch assays was 0.71 mol H₂/mol xylose. In CSTR the highest H₂ yield and production rate at 45 °C were 1.97 mol H₂/mol xylose and 7.3 mmol H₂/h/L, respectively, and at 37 °C, 1.18 mol H₂/mol xylose and 1.7 mmol H₂/h/L, respectively. At 45 °C, microbial community consisted of only two bacterial strains affiliated to Clostridium acetobutulyticum and Citrobacter freundii, whereas at 37 °C six Clostridial species were detected. In summary hydrogen yield by hot spring culture was higher with pentoses than hexoses. The highest H₂ production rate and yield and thus, the most efficient hydrogen producing bacteria were obtained at suboptimal temperature of 45 °C for both mesophiles and thermophiles.     

Comparative study on the production of biohydrogen from rice mill wastewater

This study presents the production of biohydrogen from rice mill wastewater. The acid hydrolysis and enzymatic hydrolysis operating conditions were optimized, for better reducing sugar production. The effect of pH and fermentation time on biohydrogen production from acid and enzymatic hydrolyzed rice mill wastewater was investigated, using Enterobacter aerogenes and Citrobacter ferundii. The enzymatic hydrolysis produced the maximum reducing sugar (15.8 g/L) compared to acid hydrolysis (14.2 g/L). The growth data obtained for E. aerogenes and C. ferundii, fitted well with the Logistic equation. The hydrogen yields of 1.74 mol H₂/mol reducing sugar, and 1.40 mol H₂/mol reducing sugar, were obtained from the hydrolyzate obtained from enzymatic and acid hydrolysis, respectively. The maximum hydrogen yield was obtained from E. aerogenes compared to C. ferundii, and the optimum pH for better hydrogen production was found to be in the range from 6.5 to 7.0. The chemical oxygen demand (COD) reduction obtained was around 71.8% after 60 h of fermentation.     

Converting waste molasses liquor into biohydrogen via dark fermentation using a continuous bioreactor

This study investigated the effects of substrate concentration, HRT (hydraulic retention time), and pre-treatment of the substrate molasses on biohydrogen production from waste molasses (condensed molasses fermentation solubles, CMS) with a CSTR (continuously-stirred tank reactor). First, the hydrogen production was performed with various CMS concentrations (40–90 g COD/L, total sugar 8.7–22.6 g/L) with 6 h HRT. The results show that the maximal hydrogen production rate (HPR) occurred at 80 g COD/L substrate (19.8 g ToSu/L, ToSu: Total Sugar), obtaining an HPR of 0.417 mol/L/d. However, maximum hydrogen yield (HY) of 1.44 mol H₂/mol hexose and overall hydrogen production efficiency (HPE) of 25.6% were achieved with a CMS concentration of 70 g COD/L (17.3 g ToSu/L). The substrate inhibition occurred when CMS concentration was increased to 90 g COD/L (22.6 g ToSu/L). Furthermore, it was observed that the optimal HPR, HY, and HPE all occurred at HRT 6 h. Operating at a lower HRT of 4 h decreased the hydrogen production performance because of lower substrate utilization efficiency. The employment of pre-heating treatment (60 °C for 1 h) of the substrate could markedly enhance the fermentation performance. With 6 h HRT and substrate pre-heating treatment, the HPE raised to 29.9%, which is 18% higher than that obtained without thermal pretreatment.     

Biohydrogen production from xylose by Thermoanaerobacterium thermosaccharolyticum KKU19 isolated from hot spring sediment

A thermophilic hydrogen producer was isolated from hot spring sediment and identified as Thermoanaerobacterium thermosaccharolyticum KKU19 by biochemical tests and 16S rRNA gene sequence analysis. The strain KKU19 showed the ability to utilize various kinds of carbon sources. Xylose was the preferred carbon source while peptone was the preferred organic nitrogen source. The optimum conditions for hydrogen production and cell growth on xylose were an initial pH of 6.50, temperature of 60 °C, a carbon to nitrogen ratio of 20:1, and a xylose concentration of 10.00 g/L. This resulted in a maximum cumulative hydrogen production, hydrogen production rate and hydrogen yield of 3020 ± 210 mL H₂/L, 3.95 ± 0.20 mmol H₂/L h and 2.09 ± 0.02 mol H₂/mol xylose consumed, respectively. Acetic and butyric acids were the main soluble metabolite products suggesting acetate and butyrate type fermentation.     

Bio-hydrogen production by a new isolated strain Rhodopseudomonas sp. WR-17 using main metabolites of three typical dark fermentation type

In this work, a new strain WR-17 was isolated for photo-fermentative hydrogen production and its hydrogen production capacity was investigated by utilizing main liquid byproducts of three dark fermentation types in batch culture. Experimental results indicated that strain WR-17 was identified as genus Rhodopseudomonas and maximum hydrogen yield of 2.42 mol H₂/mol acetate was obtained when the acetate was used as sole carbon source. Strain WR-17 had an excellent ability of using mixed short chain acids of three typical fermentations such as acetate and ethanol, acetate and butyrate, acetate and propionate. Result demonstrated that the metabolites of butyric acid-type fermentation as substrate is fitting to produce hydrogen and maximum cumulative hydrogen volume of 2156 ml/L-medium was obtained when acetate of 30 mmol/L and butyrate of 15 mmol/L were used. Therefore, butyric acid-type fermentation has great potential for further obtaining high hydrogen yield by the combining photo-fermentation.     

Biohydrogen production by Ethanoligenens harbinense B49: Nutrient optimization

A new hydrogen-producing bacterial strain Ethanoligenens harbinense B49 was examined for its capability of H₂ production with glucose as sole carbon source. The H₂ production was significantly affected by the concentration of the yeast powder and phosphate in the synthetic medium. The optimized concentration of yeast powder was 0.3–0.5 g/L and the maximum hydrogen yield was obtained at the concentration of phosphate about 100–150 mmol/L. The dynamics of hydrogen production showed that rapid evolution of hydrogen appeared to start after the middle-phase of exponential growth (about 8 h). The maximum H₂ yield and specific hydrogen production rate were estimated to be 2.26 mol H₂/mol glucose and 27.74 mmol H₂/g cell, respectively, when 10 g/L of glucose was present in the medium. The possible pathway of hydrogen production by Ethanoligenens sp. B49 during glucose fermentation was oxidative decarboxylation of pyruvate and the NADH pathway.     

Feasibility of biohydrogen production from Gelidium amansii

The feasibility of hydrogen production from red algae was investigated. Galactose, the main sugar monomer of red algae, was readily converted to hydrogen by dark fermentation. The maximum hydrogen production rate and yield of galactose were 2.46 L H₂/g VSS/d and 2.03 mol H₂/mol galactose_added, respectively, which were higher than those for glucose (0.914 L H₂/g VSS/d and 1.48 mol H₂/mol galactose_added). The distribution of soluble byproducts showed that H₂ production was the main pathway of galactose uptake. 5-HMF, the main byproduct of acid hydrolysis of red algae causes noncompetitive inhibition of H₂ fermentation. 1.37 g/L of 5-HMF decreased hydrogen production rate by 50% compared to the control. When red algae was hydrolyzed at 150 °C for 15 min and detoxified by activated carbon, 53.5 mL of H₂ was produced from 1 g of dry algae with a hydrogen production rate of 0.518 L H₂/g VSS/d. Red algae, cultivable on vast tracts of sea by sunlight without any nitrogen-based fertilizer, could be a suitable substrate for biohydrogen production.     

Biohydrogen production by Thermoanaerobacterium thermosaccharolyticum TERI S7 from oil reservoir flow pipeline

Thermophilic dark fermentative hydrogen producing bacterial strain, TERI S7, isolated from an oil reservoir flow pipeline located in Mumbai, India, showed 98% identity with Thermoanaerobacterium thermosaccharolyticum by 16S rRNA gene analysis. It produced 1450–1900 ml/L hydrogen under both acidic and alkaline conditions; at a temperature range of 45–60 °C. The maximum hydrogen yield was 2.5 ± 0.2 mol H₂/mol glucose, 2.2 ± 0.2 mol H₂/mol xylose and 5.2 ± 0.2 mol H₂/mol sucrose, when the respective sugars were used as carbon source. The cumulative hydrogen production, hydrogen production rate and specific hydrogen production rate by the strain TERI S7 with sucrose as carbon source was found to be 1704 ± 105 ml/L, 71 ± 6 ml/L/h and 142 ± 13 ml/g/h respectively. Major soluble metabolites produced during fermentation were acetic acid and butyric acid. The strain TERI S7 was also observed to produce hydrogen continuously up to 48 h at pH 3.9.     

Effect of substrate concentration on fermentative hydrogen production from sweet sorghum extract

The aim of the present study was to assess the influence of substrate concentration on the fermentative hydrogen production from sweet sorghum extract, in a continuous stirred tank bioreactor. The reactor was operated at a Hydraulic Retention Time (HRT) of 12 h and carbohydrate concentrations ranging from 9.89 to 20.99 g/L, in glucose equivalents. The maximum hydrogen production rate and yield were obtained at the concentration of 17.50 g carbohydrates/L and were 2.93 ± 0.09 L H₂/L reactor/d and 0.74 ± 0.02 mol H₂/mol glucose consumed, corresponding to 8.81 ± 0.02 L H₂/kg sweet sorghum, respectively. The main metabolic product at all steady states was butyric acid, while ethanol production was high at high substrate concentrations. The experiments showed that hydrogen productivity depends significantly on the initial carbohydrate concentration, which also influences the distribution of the metabolic products.     

Fermentative hydrogen production by a new alkaliphilic Clostridium sp. (strain PROH2) isolated from a shallow submarine hydrothermal chimney in Prony Bay,New Caledonia

The hydrogen-producing strain PROH2 pertaining to the genus Clostridium was successfully isolated from a shallow submarine hydrothermal chimney (Prony Bay, New Caledonia) driven by serpentinization processes. Cell biomass and hydrogen production performances during fermentation by strain PROH2 were studied in a series of batch experiments under various conditions of pH, temperature, NaCl and glucose concentrations. The highest hydrogen yield, 2.71 mol H₂/mol glucose, was observed at initial pH 9.5, 37 °C, and glucose concentration 2 g/L, and was comparable to that reported for neutrophilic clostridial species. Hydrogen production by strain PROH2 reached the maximum production rate (0.55 mM-H₂/h) at the late exponential phase. Yeast extract was required for growth of strain PROH2 and improved significantly its hydrogen production performances. The isolate could utilize various energy sources including cellobiose, galactose, glucose, maltose, sucrose and trehalose to produce hydrogen. The pattern of end-products of metabolism was also affected by the type of energy sources and culture conditions used. These results indicate that Clostridium sp. strain PROH2 is a good candidate for producing hydrogen under alkaline and mesothermic conditions.