Oxidative steam reforming of ethanol over Rh based catalysts in a micro-channel reactor

Oxidative steam reforming of ethanol (OSRE) was studied over Rh/CeO₂/Al₂O₃ catalysts in a micro-channel reactor. First, the catalyst support, Al₂O₃, was deposited on to the metallic substrate by washcoating and then the CeO₂ and active metal were sequentially impregnated. The effect of support composition as well as active metal composition on oxidative steam reforming of ethanol in a micro-channel reactor was studied at atmospheric pressure, with water to ethanol molar ratio of 6 and oxygen to ethanol molar ratio ranging from 0.5 to 1.5, over a temperature range of 350-550 °C. Ceria added to 1%Rh/Al₂O₃ showed higher activity and selectivity than 1%Rh/Al₂O₃ alone. Out of the various catalysts tested, 2%Rh/20%CeO₂/Al₂O₃ performed well in terms of activity, selectivity and stability. The OSRE performance was compared with that of SRE over 2%Rh/20%CeO₂/Al₂O₃ catalyst at identical operating conditions. Compared to SRE, the activity in OSRE was higher; however the selectivity to desired products was slightly lower. The H₂ yield obtained in OSRE was ∼112 m³ kg⁻¹ h⁻¹, as compared to ∼128 m³ kg⁻¹ h⁻¹ in SRE. The stability test performed on 2%Rh/20%CeO₂/Al₂O₃ at 500 °C for OSRE showed that the catalyst was stable for ∼40 h and then started to deactivate slowly. The comparison between packed bed reactor and micro-channel reactor showed that the micro-channel reactor can be used for OSRE to produce hydrogen without any diffusional effects in the catalyst layer.     

Steam reforming of methane over Ni catalyst in micro-channel reactor

A comprehensive study on the catalytic performance of Ni catalyst to implement millisecond steam reforming of methane (SRM) reaction in micro-channel reactors was conducted in this work. A new method to manufacture the metal-ceramics complex substrate as catalyst support was presented, that is, a layer of nano-particles, α-Al₂O₃, was thermally sprayed on a metallic substrate, usually FeCrAlloy. Ni or Rh catalyst was then impregnated on the substrate, forming firm and active catalyst coatings. The fall-off rate of the catalyst can be neglected after the plates experienced the high-temperature SRM reaction, showing the reliability in long-term use and the excellent catalytic performance for SRM reaction in micro-channel reactors. In comparison with the expensive Rh catalyst, Ni also showed wonderful performance to catalyze the SRM reaction in micro-reactors within milliseconds. Using the appropriate reactor design, CH₄ conversion reached above 90% when the residence time was as short as 32 ms for catalyst loading of 6.8 g/m². When the residence time was longer than 100 ms, CH₄ conversion was above 98%. Besides, catalyst deactivation was not detected for 500 h on stream with S/C ratio of 3.0, and for 12 h with S/C of 1.0 as well. Extensive characterizations on these Ni catalyst plates using XRD, SEM, TEM and XPS demonstrated that Ni catalysts prepared in this work did not show any sign of deactivation after being used in the micro-channel system under high-temperature operation.     

Catalytic performance of a high-cell-density Ni honeycomb catalyst for methane steam reforming

The catalysis of methane steam reforming (MSR) by pure Ni honeycombs with high cell density of 2300 cells per square inch (cpsi) was investigated to develop efficient and inexpensive catalysts for hydrogen production. The Ni honeycomb catalyst was assembled using 30-μm-thick Ni foils, and showed much higher activity than that of a Ni honeycomb catalyst with cell density of 700 cpsi at a steam-to-carbon ratio of 1.36 and a gas hourly space velocity of 6400 h^?1 in a temperature range of 873–1173 K. Notably, the activity increased approximately proportional to the increasing geometric specific surface area of the honeycombs. The turnover rate of the Ni honeycomb catalyst was higher than that of supported Ni catalysts. The changes in chemical state of the Ni catalyst during hydrogen reduction and MSR reaction were analyzed by in situ X-ray absorption fine structure spectroscopy, which revealed that deactivation was mainly due to oxidation of the surface Ni atoms. These results demonstrated that the high-cell-density Ni honeycomb catalyst exhibits good performance for MSR reaction, and easy regeneration of the deactivated Ni honeycomb catalyst is possible only via hydrogen reduction.     

Hydrogen production from ethanol steam reforming in a micro-channel reactor

Ethanol steam reforming was studied over a supported Ir/CeO₂ catalyst in a micro-channel structured reactor. The catalyst coating was deposited on the channel walls and showed a remarkably high homogeneity and an excellent adherence to the stainless steel substrate, leading to stable performance during long-term runs. Hydrogen yields exceeding 40 L_H2 g_cat⁻¹ h⁻¹ were achieved during testing with partial ethanol conversion of 65% and a residence time in the order of a few milliseconds. This hydrogen productivity was found significantly higher than in a comparable conventional fixed-bed reactor hence being extremely promising for hydrogen production in micro fuel cell applications.     

Methane steam reforming in a novel ceramic microchannel reactor

Microchannel heat exchangers and reactors can deliver very high performance in small packages. Such heat exchangers are typically fabricated from aluminum, copper, stainless steel, and silicon materials. Ceramic microchannel reactors offer some significant advantages over their metallic counterparts, including very-high-temperature operation, corrosion resistance in harsh chemical environments, low cost of materials and manufacturing, and compatibility with ceramic-supported catalysts. This work describes a ceramic microchannel reactor that achieves process intensification by combining heat-exchanger and catalytic-reactor functions to produce syngas. A complete computational fluid dynamics (CFD) model as well as a geometrically simplified hybrid CFD/chemical kinetics model is used in conjunction with experimentation to examine heat transfer, fluid flow, and chemical kinetics within the ceramic microchannel structure. Heat-exchanger effectiveness of up to 88% is experimentally demonstrated. Reactive heat-exchanger performance for methane-steam reforming reaches 100% methane conversion and high selectivity to syngas at a gas hourly space velocities (GHSV) of 15,000 h⁻¹. Model results agree well with experimental data and provide insight into physical processes underway during reactor operation.     

Novel micro-channel methane reformer assisted combustion reaction for hydrogen production

A metal catalyst-containing, 80 ml, micro-channel reactor (MCR) with a section dedicated to combustion reaction was investigated for the potential application of on-board methane steam reforming (MSR) to hydrogen production. The metal catalyst was introduced into the MCR as a shape of a thin plate that was diffusion-bonded with the other micro-channel plates. The combustion reaction was performed on the other side of the MCR for direct provision of the necessary heat for the endothermic MSR and for miniaturizing the system volume. In the MCR, both the methane conversion and the hydrogen production rate are extremely high compared with those of the equilibrium under atmospheric pressure. The required heat of reaction is successfully provided by the combustion of either hydrogen or the methane mixture on the other side of the MCR without the need for any heating cartridges. This novel micro-channel reformer is suitable for application as a compact fuel processor due to its production of hydrogen-rich syn-gas, small volume, simple catalyst loading and use of an active and easily stackable catalyst.     

Improvement of steam methane reforming via in-situ CO2 sorption over a nickel-calcium composite catalyst

Optimization of steam methane reforming (SMR) reaction by CO₂ sorption enhancement was investigated. In this study, the sorption-enhanced steam methane reforming reaction (SESMR) was conducted to maximize hydrogen production via suitable adjustments in the operating conditions of the reaction, which include the molar ratio of steam to CH₄, space velocity, and temperature. The reforming catalysts were prepared by a physical mixture of 20 wt% Ni/Al₂O₃ and CaO. The results reveal that there are significant differences in CH₄ conversion between the SMR and the SESMR from 18% to 108%; this conversion strongly depended on the reaction conditions. High-purity H₂ products (98.9%) with <0.1 ppmv CO were obtained by SESMR under the suitable conditions of 2600 cm³/g/h, steam/CH₄ molar ratio of 4 and 823 K. This implies that the high-quality H₂ produced through the SESMR process could be directly used for the proton-exchange membrane fuel cell.     

Methane steam reforming for producing hydrogen in an atmospheric-pressure microwave plasma reactor

A methane steam reforming process for producing mainly hydrogen in an atmospheric-pressure microwave plasma reactor is demonstrated. Nano carbon powders, CO_x, C₂H₂, C₂H₄, and HCN were also formed. Intermediates such as OH, NH, CH, and active N₂ were identified using optical emission spectroscopy. The selectivity of H₂ was greater than 92.7% at inlet H₂O/CH₄ molar ratio (R) ≧ 0.5, and was higher than that obtained using methane plasmalysis because steam inhibited the formation of C₂H₂. The highest methane conversion was obtained at R = 1, reaching 91.6%, with the lowest specific energy consumption of H₂ formation at [CH₄]_in = 5%, 1.0 kW, and 12 slpm. The plasma-assisted catalysis process, which packed Ni/Al₂O₃ catalysts in the discharge zone and supplied heat using hot effluents, was used to elevate the methane conversion and hydrogen selectivity. However, large amounts of 40–70 nm carbon powder, which is electrically conductive, were produced, resulting in rapid catalyst deactivation due to carbon being deposited on the surface and in the pores of catalysts.     

Copper promoted Co/MgO: A stable and efficient catalyst for glycerol steam reforming

Different types of cobalt-based mixed oxide catalysts (20 wt%Co/MgO, 5 wt%Cu-20 wt% Co/MgO, 20 wt%Co/50%MgO–50%Al₂O₃) were synthesized by the co-precipitation method and applied for hydrogen production from glycerol steam reforming. The catalysts were characterized using X-ray diffraction (XRD), H₂-Temperature-programmed reduction (H₂-TPR), CO₂-Temperature Programmed desorption, CO-Chemisorption, and CHN techniques. The H₂-TPR analysis showed the reducibility of cobalt-oxide (5Cu20CM; 5 wt%Cu-20 wt% Co/MgO) was enhanced by the copper, and reduction profiles of cobalt oxide shifted to a lower temperature (<450 °C). Among the catalysts, 5Cu20CM showed a maximum yield of hydrogen (74.6%) with 100% conversion of glycerol to the gaseous phase. The superior catalytic performance of 5Cu20CM for glycerol conversion was attributed to the smaller particle size (7 nm), higher dispersion of cobalt (35.0%), and the higher surface area (56 m²/g) of cobalt metal. Furthermore, Raman spectroscopy of the spent catalysts confirmed that the copper promoted cobalt-magnesium catalyst suppressed the carbon formation, consequently, 5Cu20CM catalyst showed a stable performance up to 30 h.     

Comparative analysis on sorption enhanced steam reforming and conventional steam reforming of hydroxyacetone for hydrogen production: Thermodynamic modeling

The chemical thermodynamics of sorption enhanced steam reforming (SESR) of hydroxyacetone for hydrogen production were investigated and contrasted with hydroxyacetone steam reforming (SR) by means of Gibbs free energy minimization principle and response reactions (RERs) method. Hydrogen is mainly derived methane steam reforming reaction from and water gas shift reaction. The former reaction contributes more than the latter one to hydrogen production below 550 °C and at higher temperature the latter one tends to dominate. The maximum hydrogen concentration is 70% in SR, which is far below hydrogen purities required by fuel cells. In SESR, hydrogen purities are over 99% in 525–550 °C with a WHMR greater than 8 and a CHMR of 6. The optimum temperature for SESR is approximately 125 °C lower than that for SR. In comparison with SR, SESR has the advantage of almost complete inhibition of coke formation in 200–1200 °C for WHMR ≥ 3.     

Mechanistic insights into methanol steam reforming over a ZnZr oxide catalyst with improved activity

Methanol steam reforming (MSR) holds great potential for mobile hydrogen production, but it still requires an active and stable catalyst. In this work, we report a high-performance ZnZr-0.5 composite oxide catalyst for this reaction, with a hydrogen production rate of 2.80 mol·g_cat^?1·h^?1 and CO₂ selectivity of 99.6% at a methanol space velocity of 22,762 mL·g_cat^?1·h^?1. It also exhibits superior long-term durability in the TOS test for more than 100 h. Such good activity results from a synergistic effect of ZnO–ZrO₂ dual sites. ZrO₂ is capable of stabilizing and storing more CH₃O1 and HCOO1 intermediates while ZnO is in charge of the dehydrogenation of these key intermediates. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and chemisorption results reveal that the MSR reaction experiences successively the hydrolysis of methyl formate and dehydrogenation of formate. More importantly, it is found that H₂O significantly promotes the dehydrogenation of HCOO1 intermediate by directly participating in this reaction from pulse chemisorption experiments.     

Oxidative steam reforming of ethanol over a Pt/Al2O3 catalyst in a Pd-based membrane reactor

In this study, the ability of a Pd-Ag membrane reactor of producing ultrapure hydrogen via oxidative steam reforming of ethanol has been evaluated. A self supported Pd-Ag tube of wall thickness 60 μm has been filled with a commercial Pt-based catalyst and assembled into a membrane module in a finger-like configuration. In order to evaluate the hydrogen yield behavior under different operating conditions, experimental tests have been performed at temperatures of 400 and 450 °C and pressures of 150 and 200 kPa. The oxidative steam reforming of ethanol has been carried out by feeding the membrane reactor with a gas stream containing a dilute water-ethanol mixture and air. Different water/ethanol feed flow rates (5, 10, 15 g h⁻¹), several water/ethanol (4, 10, 13) and oxygen/ethanol (0.3, 0.5, 0.7) feed molar ratios have been tested. The results pointed out that the highest hydrogen yield (moles of permeated hydrogen per mole of ethanol fed) corresponding to almost 4.1 has been attained at 450 °C and 200 kPa of lumen pressure by using a water/ethanol/oxygen feed molar ratio of 10/1/0.5.The results of these tests have been compared with those reported for the ethanol steam reforming in a Pd-Ag membrane reactor filled with the same Pt-based catalyst. This comparison has shown a positive effect on the hydrogen yield of small oxygen addition in the feed stream.     

Methane steam reforming in a Pd-Ag membrane reformer: An experimental study on reaction pressure influence at middle temperature

In this experimental work, methane steam reforming (MSR) reaction is performed in a dense Pd-Ag membrane reactor and the influence of pressure on methane conversion, CO_x-free hydrogen recovery and CO_x-free hydrogen production is investigated. The reaction is conducted at 450 °C by supplying nitrogen as a sweep gas in co-current flow configuration with respect to the reactants. Three experimental campaigns are realized in the MR packed with Ni-ZrO catalyst, which showed better performances than Ni-Al₂O₃ used in a previous paper dealing with the same MR system. The first one is directed to keep constant the total pressure in both retentate and permeate sides of the membrane reactor. In the second case study, the total retentate pressure is kept constant at 9.0 bar, while the total permeate pressure is varied between 5.0 and 9.0 bar. As the best result of this work, at 450 °C and 4.0 bar of total pressure difference between retentate and permeate sides, around 65% methane conversion and 1.2 l/h of CO_x-free hydrogen are reached, further recovering 80% CO_x-free hydrogen over the total hydrogen produced during the reaction. Moreover, a study on the influence of hydrogen-rich gas mixtures on the hydrogen permeation through the Pd-Ag membrane is also performed and discussed.     

Kinetic investigation on butanol steam reforming over Ru/Al2O3 catalyst

Steam reforming of biomass-derived oxygenates is an attractive technique for the renewable production of hydrogen (H₂). In this work, steam reforming of n-butanol – a representative of bio-oxygenates – was studied over commercial 5% Ru/Al₂O₃ catalyst in a fixed-bed reactor. Kinetics of butanol reforming was investigated between temperatures 623 and 773 K at steam/carbon (S/C) ratio equal to 33.3 mol/mol. The W/F_A0 ratio (W: mass of catalyst, F_A0: molar flow rate of butanol in feed) was varied between 3.3 and 16.7 g h/mol. At T = 773 K, butanol conversion and H₂ yield were 93.4% and 0.61 mol/mol. Evaluation of the kinetic data showed that reaction order with respect to butanol was unity. The activation energy for the investigated reaction was 78 kJ/mol. Finally, a Langmuir-Hinshelwood model that assumed the surface reaction between the adsorbed reactants as rate-determining was used to describe the kinetic data.     

The role of effectiveness factor on the modeling of methanol steam reforming over CuO/ZnO/Al2O3 catalyst in a multi-tubular reactor

A pseudo-homogeneous model for the methanol steam reforming process was developed based on reaction kinetics over a CuO/ZnO/Al₂O₃ catalyst and non-adiabatic heat and mass transfer performances in a co-current packed-bed reactor. A Thiele modulus method and an intraparticle distribution method were applied for predicting the effectiveness factors for main reactions and providing insights into the diffusion-reaction process in a cylindrical catalyst pellet. The results of both methods are validated and show good agreements with the experimental data, but the intraparticle distribution method provides better predictions. Results indicate that increases in catalyst size and bulk fluid temperature amplify the impact of intraparticle diffusion limitations, showing a decrease in effectiveness factors. To satisfy the requirements of a high temperature polymer electrolyte membrane fuel cell stack, the optimized operating conditions, which bring the methanol and CO concentrations to less than 1% vol in the reformate stream, are determined based on the simulation results.     

Methane steam reforming using a membrane reactor equipped with a Pd-based composite membrane for effective hydrogen production

Herein, a methane steam reforming (MSR) reaction was carried out using a Pd composite membrane reactor packed with a commercial Ru/Al₂O₃ catalyst under mild operating conditions, to produce hydrogen with CO₂ capture. The Pd composite membrane was fabricated on a tubular stainless steel support by the electroless plating (ELP) method. The membrane exhibited a hydrogen permeance of 2.26 × 10^?3 mol m² s^?1 Pa^?0.5, H₂/N₂ selectivity of 145 at 773 K, and pressure difference of 20.3 kPa. The MSR reaction, which was carried out at steam to carbon ratio (S/C) = 3.0, gas hourly space velocity (GHSV) = 1700 h^?1, and 773 K, showed that methane conversion increased with the pressure difference and reached 79.5% at ΔP = 506 kPa. This value was ～1.9 time higher than the equilibrium value at 773 K and 101 kPa. Comparing with the previous studies which introduced sweeping gas for low hydrogen partial pressure in the permeate stream, very high pressure difference (2500–2900 kPa) for increase of hydrogen recovery and very low GHSV (<150) for increase hydraulic retention time (HRT), our result was worthy of notice. The gas composition monitored during the long-term stability test showed that the permeate side was composed of 97.8 vol% H₂, and the retentate side contained 67.8 vol% CO₂ with 22.2 vol% CH₄. When energy was recovered by CH₄ combustion in the retentate streams, pre-combustion carbon capture was accomplished using the Pd-based composite membrane reactor.     

Numerical simulation of configuration and catalyst-layer effects on micro-channel steam reforming of methanol

A micro-reactor with eight non-parallel channels is proposed to improve the performance of micro-channel steam reforming of methanol. The widths of some channels in the micro-reactor vary gradually along the reactor length direction. The Zn-Cr/CeO₂-ZrO₂ catalyst is coated in the reformer with a certain porosity and permeability. The effects of micro-reactor structures and catalyst-coated manners on several factors are studied, including temperature distributions, velocity distributions, reactant concentrations and the methanol conversion rate. The results indicate that such a structure with a certain entrance inclination angle and channel inclination angle guarantees flow distribution uniformity in each reforming channel. Flow distribution uniformity is conducive to the increase of the methanol conversion rate. Besides, in order to measure strengths and weaknesses of different catalyst-coated manners, a wall-coated reformer and a packed-bed reformer are studied respectively. It is found that compared to the packed-bed reformer, the temperature and the methanol conversion rate in wall-coated reformer are far higher. It is necessary to find an optimal catalyst thickness that is able to reduce the CO concentration because the catalyst thickness can affect CO concentration in the product gases indirectly. The optimal inclination angles and the catalyst thickness are proposed based on the simulating results.     

The effect of non-uniform temperature on the sorption-enhanced steam methane reforming in a tubular fixed-bed reactor

The effect of non-uniform temperature on the sorption-enhanced steam methane reforming (SE-SMR) in a tubular fixed-bed reactor with a constant wall temperature of 600 °C is investigated numerically by an experimentally verified unsteady two-dimensional model. The reactor uses Ni/Al₂O₃ as the reforming catalyst and CaO as the sorbent. The reaction of SMR is enhanced by removing the CO₂ through the reaction of CaO + CO₂ → CaCO₃ based on the Le Chatelier's principle. A non-uniform temperature distribution instead of a uniform temperature in the reactor appears due to the rapid endothermic reaction of SMR followed by an exothermic reaction of CO₂ sorption. For a small weight hourly space velocity (WHSV) of 0.67 h^?1 before the CO₂ breakthrough, both a low and a high temperature regions exist simultaneously in the catalyst/sorbent bed, and their sizes are enlarged and the temperature distribution is more non-uniform for a larger tube diameter (D). Both the CH₄ conversion and the H₂ molar fraction are slightly increased with the increase of D. Based on the parameters adopted in this work, the CH₄ conversion, the H₂ and CO molar fractions at D = 60 mm are 84.6%, 94.4%, and 0.63%, respectively. After CO₂ breakthrough, the reaction of SMR dominates, and the reactor performance is remarkably reduced due to low reactor temperature.For a higher value of WHSV (4.03 h^?1) before CO₂ breakthrough, both the reaction times for SMR and CO₂ sorption become much shorter. The size of low temperature region becomes larger, and the high temperature region inside the catalyst/sorbent bed doesn't exist for D ≥ 30 mm. The maximum temperature difference inside the catalyst/sorbent bed is greater than 67 °C. Both the CH₄ conversion and H₂ molar fraction are slightly decreased with the increase of D. However, this phenomenon is qualitatively opposite to that for small WHSV of 0.67 h^?1. The CH₄ conversion and H₂ molar fraction at D = 60 mm are 52.6% and 78.7%, respectively, which are much lower than those for WHSV = 0.67 h^?1.     

Syngas production from methane dry reforming over SmCoO3 perovskite catalyst: Kinetics and mechanistic studies

The kinetics of the methane dry (CO₂) reforming over the SmCoO₃ was investigated in the temperature ranged 973–1073 K by varying the CH₄ and CO₂ partial pressures. Based on detailed study of the reaction mechanism, a mechanistic model is proposed from which a kinetic model is derived. The mechanistic pattern assumes adsorption of CH₄ on reduced Co, followed by methane cracking and carbon deposition. CO₂ reacts with Sm₂O₃ to form Sm₂O₂CO₃ and the oxycarbonates react with carbon to produce CO. The power law and Langmuir–Hinshelwood kinetic model which is established on this mechanism were able to forecast the kinetic results.     

Methane membrane steam reforming: Heat duty assessment

Membrane reactors are an innovative technology with huge application potentialities for equilibrium limited endothermic reactions. Assembling a membrane selective to a reaction product avoids the equilibrium conditions to be achieved, supporting the reactions at lower operating temperatures. Taking as an example the natural gas steam reforming, a methane conversion around 98% can be reached imposing an operating temperature of 823 K, much lower than that of the traditional process. In the present paper, a stringent analysis of heat power requirement needed to carry out the natural gas steam reforming process by applying a membrane reactor is made. The simulations allows to understand how the main operating parameters (inlet temperature, inlet methane flow-rate, steam to carbon ratio, ratio between sweeping steam and inlet methane, operating reaction pressure) influence the total heat power required by the process, divided among power contributions for the reaction heat duty, reactant steam and permeation steam generation and preheating. Moreover, the specific thermal energy per mole of pure H₂ is computed and assessed. Optimizing the operating conditions set, a specific thermal energy per mole of pure hydrogen of 92.3 kWh kmol⁻¹ is obtained corresponding to a total thermal power of 687.4 kW required to convert, in a single membrane reactor, a methane flow-rate of 2 kmol h⁻¹ (GHSV = 9.590 h⁻¹) with a conversion around 98%.