一种双带宽UHF主从耦合式LC VCO

为了满足无线通信系统应用需要,设计了一种主从耦合式LC压控振荡器(VCO).基于0.18 μm CMOS标准工艺,由一个5 GHz主VCO和两个起分频作用的从VCO组成,其中主VCO选用PMOS考毕兹差分振荡结构,在两个互补交叉耦合的从VCO的输出端之间设置有注入式NMOS器件以达到分频的目的.仿真及硬件电路实验结果表明,在1.8 V低电源电压下,5 GHz主VCO的调谐范围为4.68～5.76 GHz,2.5 GHz从VCO的调谐范围为2.32～2.84 GHz;在1 MHz的偏频下,5 GHz主VCO的相位噪声为118.2 dBc/Hz,2.5 GHz从VCO的相位噪声为124.4 dBc/Hz.另外,主从VCO的功耗分别为6.8 mW和7.9 mW,因此特别适用于低功耗、超高频短距离无线通信系统中.     

A Low Voltage Divide-by-4 Injection Locked Frequency Divider With Quadrature Outputs

This letter presents a low voltage quadrature divide-by-4 (divide4) injection-locked frequency divider (QILFD). The QILFD consists of a 1.8-GHz quadrature voltage controlled oscillator (QVCO) and two NMOS switches, which are inserted into the quadrature outputs of the QVCO for signal injection. The low-voltage CMOS divide4 QILFD has been implemented with the TSMC 0.18-mum 1P6 M CMOS technology and the core power consumption is 3.12mW at the supply voltage of 1.2V. The free-running frequency of the QILFD is tunable from 1.73 to 1.99GHz, the measured phase noise of QILFD is -118dBc/Hz at 1-MHz offset from the free running frequency of 1.82GHz. At the input power of 0dBm, the total locking range is from 6.86 to 8.02GHz as the tuning voltage is varied from 0 to 1.2V. The phase noise of the locked output spectrum is lower than that of free running ring oscillator by 11dBc/Hz. The phase deviation of quadrature output is about 0.8deg     

A low-phase-noise 5-GHz CMOS quadrature VCO using superharmonic coupling

A new concept for quadrature coupling of LC oscillators is introduced and demonstrated on a 5-GHz CMOS voltage-controlled oscillator (VCO). It uses the second harmonic of the outputs to couple the oscillators. The technique provides quadrature over a wide tuning range without introducing any increase in phase noise or power consumption. The VCO is tunable between 4.57 and 5.21 GHz and has a phase noise lower than -124 dBc/Hz at 1-MHz offset over the entire tuning range. The worst-case measured image rejection is 33 dB. The circuit draws 8.75 mA from a 2.5-V supply.     

A 15/30-GHz Dual-Band Multiphase Voltage-Controlled Oscillator in 0.18- μm CMOS

A multiphase oscillator suitable for 15/30-GHz dual-band applications is presented. In the circuit implementation, the 15-GHz half-quadrature voltage-controlled oscillator (VCO) is realized by a rotary traveling-wave oscillator, while frequency doublers are adopted to generate the quadrature output signals at the 30-GHz frequency band. The proposed circuit is fabricated in a standard 0.18-mum CMOS process with a chip area of 1.1times1.0 mm². Operated at a 2-V supply voltage, the VCO core consumes a dc power of 52 mW. With a frequency tuning range of 250 MHz, the 15-GHz half-quadrature VCO exhibits an output power of -8 dBm and a phase noise of -112 dBc/Hz at 1-MHz offset frequency. The measured power level and phase noise of the 30-GHz quadrature outputs are -16 dBm and -104 dBc/Hz, respectively     

A 5-GHz fully integrated full PMOS low-phase-noise LC VCO

A 5-GHz fully integrated, full PMOS, low-phase-noise and low-power differential voltage-controlled oscillator (VCO) is presented. This circuit is implemented in a 0.35-/spl mu/m four-metal BiCMOS SiGe process. At 2.7-V power supply voltage and a total power dissipation of only 13.5 mW, the proposed VCO features a worst case phase noise of -97 dBc/Hz and -117 dBc/Hz at 100 kHz and 1 MHz frequency offset, respectively. The oscillator is tuned from 5.13 to 5.68 GHz with a tuning voltage varying from 0 to 2.7 V.     

A low-power ka-band Voltage-controlled oscillator implemented in 200-GHz SiGe HBT technology

An integrated low-power low phase-noise Ka-band differential voltage-controlled oscillator (VCO) is developed in a 0.12-/spl mu/m 200-GHz silicon-germanium heterojunction bipolar transistor technology. The use of line inductors instead of transmission lines is demonstrated to be feasible in LC-tuned resonators for Ka-band applications. This VCO can operate from a supply voltage of 1.6-2.5 V. A single-sideband phase noise of -99 dBc/Hz at 1-MHz offset from the carrier frequency of 33 GHz is achieved, together with a VCO figure-of-merit of -183.7 dBc/Hz. The frequency tuning constant of the VCO in the linear regime is -0.547 GHz/V.     

CMOS Colpitts Quadrature VCO Using the Body Injection-Locked Coupling Technique

This paper presents a new low phase noise quadrature voltage-controlled oscillator (QVCO), which consists of two differential complementary Colpitts voltage-controlled oscillators (VCOs) with a tail inductor. The output of the tail inductor in one differential VCO is injected to the bodies of the nMOSFETs in the other differential VCO and vice versa. The proposed CMOS QVCO has been implemented with the TSMC 0.18 mum CMOS technology and the die area is 0.725 times 0.839 mm². At the supply voltage of 1.1 V, the total power consumption is 9.9 mW. The free-running frequency of the QVCO is tunable from 5.26 GHz to 5.477 GHz as the tuning voltage is varied from 0.0 V to 1.1 V. The measured phase noise at 1 MHz frequency offset is -124.36 dBc/Hz at the oscillation frequency of 5.44 GHz and the figure of merit (FOM) of the proposed QVCO is -189.1 dBc/Hz.     

A Low‐Spur CMOS PLL Using Differential Compensation Scheme

This paper proposes LC voltage‐controlled oscillator (VCO) phase‐locked loop (PLL) and ring‐VCO PLL topologies with low‐phase noise. Differential control loops are used for the PLL locking through a symmetrical transformer‐resonator or bilaterally controlled varactor pair. A differential compensation mechanism suppresses out‐band spurious tones. The prototypes of the proposed PLL are implemented in a CMOS 65‐nm or 45‐nm process. The measured results of the LC‐VCO PLL show operation frequencies of 3.5 GHz to 5.6 GHz, a phase noise of –118 dBc/Hz at a 1 MHz offset, and a spur rejection of 66 dBc, while dissipating 3.2 mA at a 1 V supply. The ring‐VCO PLL shows a phase noise of –95 dBc/Hz at a 1 MHz offset, operation frequencies of 1.2 GHz to 2.04 GHz, and a spur rejection of 59 dBc, while dissipating 5.4 mA at a 1.1 V supply.     

A 4.3?GHz BiCMOS VCO with multiple 360° variable phase outputs using the vector sum method

A 4.3?GHz voltage controlled oscillator (VCO) with multiple independently tunable phase outputs is presented. The VCO is realized by coupling two LC oscillators together in order to obtain quadrature signals and is tunable between 4.12 and 4.74?GHz. The variable phase outputs are achieved by varying the amplitudes of the in-phase and quadrature signals independently and then combining these signals together. By using multiple Gilbert cells as variable gain amplifiers (VGAs), multiple tunable phase outputs are achieved with the use of only one quadrature VCO. The VGAs are controlled using a custom non-linear digital-to-analog converter. The entire circuit is designed using a 3.3?V SiGe BiCMOS process. A maximum phase noise of ?108.17?dBc/Hz was measured over the entire tuning range at a 1?MHz offset. The outputs of the VCO can be used as local oscillators that achieve phase shifting during radio frequency up or down conversion.     

A low-power 2/5.8-GHz dual-wide-band CMOS LC-VCO with switched-inductor technique

A fully integrated dual-band LC voltage control oscillator, designed in a 0.18-µm CMOS technology for 5.8-GHz/2.0-GHz wireless communication applications, is described. The frequency band switching is accomplished with switched-inductor technique. The dual-band oscillator can be operated in 5.38–6.23?GHz and 1.78–2.07?GHz with 15% frequency tuning range. Two different inductors are used for the frequency band switching. Frequency tuning is implemented by varying the capacitance of a MOS varactor. The measured phase noise is ?109?dBc/Hz @ 1?MHz and ?112?dBc/Hz @ 1?MHz for frequency at 5.8?GHz and 2?GHz, respectively. This oscillator is fabricated in UMC's 0.18-µm one-poly-six-metal 1.8?V process. The power dissipation of this dual-band VCO is 11.7 and 9.3?mW for oscillation frequency of 2?GHz and 5.8?GHz, respectively.     

A 1.8-V 2.4/5.15-GHz dual-band LCVCO in 0.18-/spl mu/m CMOS technology

A dual band, fully integrated, low phase-noise and low-power LC voltage-controlled oscillator (VCO) operating at the 2.4-GHz industrial scientific and medical band and 5.15-GHz unlicensed national information infrastructure band has been demonstrated in an 0.18-/spl mu/m CMOS process. At 1.8-V power supply voltage, the power dissipation is only 5.4mW for a 2.4-GHz band and 8mW for a 5.15-GHz band. The proposed VCO features phase-noise of -135dBc/Hz at 3-MHz offset frequency away from the carrier frequency of 2.74GHz and -126dBc/Hz at 3-MHz offset frequency away from 5.49GHz. The oscillator is tuned from 2.2 to 2.85GHz in the low band (2.4-GHz band) and from 4.4 to 5.7GHz in the high band (5.15-GHz band).     

基于电感电容振荡器的电荷泵锁相环的设计

设计并实现了一种采用电感电容振荡器的电荷泵锁相环,分析了锁相环中鉴频/鉴相器(PFD)、电荷泵(CP)、环路滤波器(LP)、电感电容压控振荡器(VCO)的电路结构和设计考虑。锁相环芯片采用0.13μm MS&RF CMOS工艺制造。测试结果表明,锁相环锁定的频率为5.6～6.9 GHz。在6.25 GHz时,参考杂散为-51.57 dBc;1 MHz频偏处相位噪声为-98.35 dBc/Hz;10 MHz频偏处相位噪声为-120.3 dBc/Hz;在1.2 V/3.3 V电源电压下,锁相环的功耗为51.6 mW。芯片总面积为1.334 mm2。     

基于对称螺旋型电感和差分二极管的2.4GHz CMOS正交输出压控振荡器

提出了一种产生2.4GHz正交本地振荡信号的方法.它将LC-VCO和两级环路振荡器两种结构组合起来以实现正交输出的低相位噪声压控振荡器.LC网络是由在片对称螺旋型电感和差分二极管组成的.详细论述了VCO原理及其噪声性能.该电路已经用0.25μm单层多晶、五层金属N阱CMOS数字工艺制作.测量结果表明:它可以提供正交的本地振荡信号,其振荡频率可以在300MHz的范围内调节,当仅对差分输出振荡信号的一端进行测试时,振荡频率为2.41GHz时,去偏移中心为600kHz时的相位噪声为-104.33dBc/Hz.而且,它能在很低的电源电压下工作,功耗也很低,所以,它在集成收发机中将得到广泛的应用.     

A compact 43-GHz monolithic differential VCO in 0.5-/spl mu/m InP DHBT technology

A compact monolithic integrated differential voltage controlled oscillator (VCO) using 0.5-/spl mu/m emitter width InP/InGaAs double-heterostructure bipolar transistors with a total chip size of 0.42 mm /spl times/ 0.46 mm is realized by using cross-coupled configuration for extremely high frequency satellite communications system applications. The device performance of F/sub max/ greater than 320 GHz at a current density of 5 mA//spl mu/m/sup 2/ and 5-V BVceo allows us to achieve a low phase noise 42.5-GHz fundamental VCO with -0.67-dBm output power. The VCO exhibits the phase noise of -106.8 dBc/Hz at 1-MHz offset and -122.3 dBc/Hz at 10-MHz offset from the carrier frequency.     

基于对称螺旋型电感和差分二极管的2.4GHz CMOS正交输出压控振荡器

提出了一种产生2.4GHz正交本地振荡信号的方法.它将LC-VCO和两级环路振荡器两种结构组合起来以实现正交输出的低相位噪声压控振荡器.LC网络是由在片对称螺旋型电感和差分二极管组成的.详细论述了VCO原理及其噪声性能.该电路已经用0.25μm单层多晶、五层金属N阱CMOS数字工艺制作.测量结果表明:它可以提供正交的本地振荡信号,其振荡频率可以在300MHz的范围内调节,当仅对差分输出振荡信号的一端进行测试时,振荡频率为2.41GHz时,去偏移中心为600kHz时的相位噪声为-104.33dBc/Hz.而且,它能在很低的电源电压下工作,功耗也很低,所以,它在集成收发机中将得到广泛的应用.     

Current reused LC VCOs

This paper presents current reused voltage controlled oscillator (VCO) topologies by stacking switching transistors in series like a cascode. The VCOs can operate with only half the amount of dc current compared to those of the conventional VCO topologies. Fabricated in 0.18-/spl mu/m CMOS process, a differential VCO operates in a 2.1-GHz band with a phase noise of -110dBc/Hz at 1-MHz offset, and a quadrature VCO operates in a 3.1-GHz band with a phase noise of -102dBc/Hz at 1-MHz offset. The proposed topologies can be adopted for low-power applications.     

5-GHz Low Phase-Noise CMOS VCO Integrated With a Micromachined Switchable Differential Inductor

A 5-GHz CMOS voltage-controlled oscillator (VCO) integrated with a micromachined switchable differential inductor is reported in a 0.18 mum radio frequency-CMOS-based microelectromechanical system technology. The power consumption of the core is about 8 mW at the supply voltage of 1.8 V. A total tuning range of 470 MHz (from 5.13 GHz to 5.60 GHz) is achieved as the tuning voltage ranging from 0 V to 1.8 V. In the practical tuning range, the measured phase noise performances at 1 MHz offset are less than -125 dBc/Hz and -126 dBc/Hz when the inductor switch is turned on and off, respectively. The figure-of-merit is better than -190 dB. When compared with a contrast VCO circuit that utilizes a standard switchable differential inductor, this oscillator reaches a phase noise improvement of around 3 dB as the switch is turned on. Around 1-dB on-off phase noise difference can be achievable.     

A 25-GHz ultra-low phase noise InGaP/GaAs HBT VCO

A 25-GHz monolithic voltage controlled oscillator (VCO) has been designed and fabricated in a commercial InGaP/GaAs heterojunction bipolar transistor (HBT) process. This balanced VCO has a novel topology using a feedback /spl pi/-network and a common-emitter transistor configuration. Ultra-low phase noise is achieved: -106 dBc/Hz and -130 dBc/Hz at 100kHz and 1-MHz offset frequency, respectively. To the authors' knowledge, this is the lowest phase noise achieved in a monolithic microwave integrated circuit (MMIC) VCO at such high frequency. The single-ended output power is -1 dBm. It can be tuned between 25.33GHz and 25.75GHz using the base-collector junction capacitor of the HBT as a varactor. The dc power consumption is 90mW for a 9-V supply. An excellent figure-of-merit of -195 dBc/Hz is obtained.     

Noise property of a quadrature balanced VCO

A quadrature balanced voltage controlled oscillator (B-VCO) with current source switching is proposed and analyzed. This letter shows analytically that the switching improves the phase noise. A switched transistor is also used as a coupling transistor to generate quadrature signals without degrading the phase noise. To investigate the effect of quadrature coupling on the phase noise, a single B-VCO and a quadrature B-VCO are implemented with identical components in an 0.18-/spl mu/m CMOS process. Both VCO cores draw about 8.8mA under a low bias voltage of 1.8V. The oscillation frequencies are 10.21GHz and 10.81GHz. The measured phase noises of the single at an offset frequency of 1MHz VCO is -114.83 dBc/Hz while that of the quadrature VCO is -116.67 dBc/Hz. The quadrature B-VCO is superior to the single B-VCO with respect to phase noise and oscillation frequency in the X-band.     

A 5-GHZ Low-Power Series-Coupled BiCMOS Quadrature VCO With Wide Tuning Range

This letter presents a novel quadrature voltage controlled oscillator (QVCO) implemented in a 47-GHz SiGe BiCMOS technology. The QVCO is a serially coupled LC VCO that utilizes SiGe heterojunction bipolar transistors for oscillation and metal oxide semiconductor field effect transistors for coupling. The SiGe BiCMOS QVCO prototype achieves about 14.6% tuning range from 4.3 to 5GHz. The phase noise of the QVCO is measured as -114.3 dBc/Hz at 2-MHz offset. The 5-GHz QVCO core consumes 6-mA current from a 3.3-V power supply and occupies 0.88mm² area