共查询到20条相似文献,搜索用时 93 毫秒
1.
应用人工神经网络监测切削颤振 总被引:2,自引:2,他引:0
文章提出了应用人工神经网络模型进行颤振预报的方法,结合实测振动数据,找出了足以反映振动状态变化的特征量,并给邮了人工神经网络模型的程序实现方法。最后对人工神经网络方法的性能和改进作了探讨,指出了人工神经网络是一种较为可靠预报模型。 相似文献
2.
3.
针对封接合金的材料设计,分别用人工神经网络和回归分析方法对材料的试验数据进行了较深入的分析,并从拟合精度、预报准确性、建立模型等方面对这两种方法进行了比较和讨论。得到的结果是神经网络方法优于回归方法,特别是当数学模型未知时,人工神经网络方法可以自动地建立起输入量与输出量之间的映射关系,很好地实现了知识获取。 相似文献
4.
研究了将人工神经网络方法应用于热重分析数据评估润滑油某些使用性能的可行性,给出了组建最优人工神经网络的规则。应用5-3-3结构BP模型人工神经网络评估润滑油的使用性能,取得了满意的结果,表明将人工神经网络应用于润滑油使用性能的评估是可行的。 相似文献
5.
6.
用人工神经网络预测含穿透缺陷受压管道的失效应力 总被引:2,自引:0,他引:2
本文引入人工神经网络方法,对含穿透缺陷受压管道的失效应力进行了预测,得到了满意的结果。人工神经网络方法为此类问题的求解提供了一种新工具。 相似文献
7.
基于人工神经网络技术的产品可装配性评价 总被引:1,自引:0,他引:1
讨论了以往产品可装配性评价方法的不足,并根据人工神经网络的特点,阐述了人工神经网络在可装配性评价中运用的适用性和基于人工神经网络的可装配性评价的实现方法,根据Boothroyd方法中提供的实验数据,通过神经元网络学习建立了评价模型,依此模型可以对表征产品可装配性的装配时间等指标进行评价,为优选设计方案和改进设计提供决策支持。 相似文献
8.
9.
用分形和神经网络算法改善仪表精度和响应时间 总被引:2,自引:0,他引:2
研究在仪器仪表中利用分形插值和人工神经网络算法改善测试精度和响应时间的方法。在仪表检测中有时会遇到检测的分辨率与实时性相冲突的情况 ,此时对数据进行插值是一个很好的解决办法。利用分形和人工神经网络算法插值是一种可以进行多点数插值的优越方法 ,因为它可以通过训练学习不断修正网络的权值 ,使检测误差的方差控制在预定的范围。还研究了利用神经网络做谱分析来求取主频的方法 ,它在运算速度和分辨率方面都优于 FFT。文章还提出了一些减少人工神经网络学习训练时间的方法。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
14.
15.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
16.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献
17.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
18.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
19.
V. P. Dragunov E. G. Kostsov 《Optoelectronics, Instrumentation and Data Processing》2009,45(3):234-242
Specific features of operation of one- and two-capacitor microelectromechanical converters (MEMC) of energy of mechanical microscopic vibrations into electric energy with a modulated electrode-gap magnitude and with allowance for the mutual influence of electrical and elastic forces are analyzed, and the characteristics of these two devices are compared. The main factors restricting the increase in MEMC power are demonstrated to be the effects of “collapsing” and the condition of conservation of positive rigidity of the system. Expressions for estimating the limiting MEMC parameters are derived. The possibility of electrical energy generation in the presence of “real“ sources of wide-spectrum microscopic vibrations is considered. 相似文献