共查询到20条相似文献,搜索用时 109 毫秒
1.
为有效自动选择通信链路,降低通信全局风险度,提出了一种基于风险均衡度的电力5G通信链路自动选择方法。首先,以最低全局风险度、最高业务通道可用性为目标函数,以通道带宽、时延与丢包率为约束条件,建立电力5G通信链路自动选择模型。以业务风险度与网络业务风险均衡度等为指标,评估业务风险度。按照风险度大小,由低至高排序通信业务,利用通信链路自动选择模型,优先为风险度较低的业务选择链路。通过量子遗传算法求解通信链路自动选择模型,获取最低全局风险度与最高业务通道可用性值,完成通信链路自动选择。实验证明:该方法可有效获取各通信业务风险度,自动选择通信链路,降低全局风险度,提升业务通道可用性和通道带宽,减少通道时延与丢包率,风险均衡效果较优。 相似文献
2.
无人值守机房实时监控软件的设计与实现 总被引:1,自引:0,他引:1
本文对无人值守机房的实时监控软件的设计进行讨论,利用串口通信开发技术,实现了对机房环境温湿度和UPS电源系统的实时测量和自动调控。针对该监控软件的主要部分——串口通信模块,利用Visual C 的开发技术,设计一个通用的串口通信类,并讨论了该类的具体实现和应用方法。 相似文献
3.
4.
ATM(自动取款机)业务及故障自动监控系统,集SNA通信技术、TCP/IP通信技术、数据库远程通信技术、语音通信技术及软件编程技术于一体,实现了离散分布的ATM的集中监控和管理,使位于银行的工作人员及时掌握每台ATM的当前工作状况,且在ATM出现故障时,进行远程自动报警,并根据银行管理需要,自动生成ATM交易数据和故障信息的日报表、月报表、年报表。解决了当ATM线路出现故障时,远程自动激活的问题。 相似文献
5.
基于通信的MAS内多Agent自动协商 总被引:3,自引:0,他引:3
给出了一个通用的基于联合意图的多Agent系统内部Agent协商模型,详细分析了Agent间的异步通信机制以及基于语言行为学的Agent自动协商语义,并在该协商语义的基础上给出了MAS内部基于联合意图的Agent自动协商通信协议,最后利用通信顺序进程验证了该协议的安全性和活性. 相似文献
6.
劳诚信 《电脑技术——Hello-IT》1995,(6):2-3
随着计算机技术和现代通信技术的迅速发展,以及人们对信息化需求的不断增强,智能化大楼在世界各发达国家应运而生。1984年美国哈特福特城市将一座旧式大楼进行改建,对楼内的空调、电梯、照明、防火、防盗等设备采用计算机进行自动监控;将计算机技术与现代通信技术结合起来,为客户提供语音通信、文字处理、电子邮件、情报资料检索等信息服务。该大楼被认为是世界上第一座智能化大楼。智能化大楼采用电子信息技术对大楼中的设备进行自动监控,对信息资源进行收集、利用和管理以及对用户提供信息服务等。美国一个智能化大楼研究机构把智能… 相似文献
7.
8.
《计算机与网络》2006,(9):51-51
距离与速率如果两台无线设备相互靠近,它们将以两个接口所支持的最高传输速率进行通信。但是,如果以最高传输速率进行通信,传输的距离可能小于较低传输速率传输的距离。这就是WLAN无线网络接口要提供自动选择传输速率机制的原因。如果相互移开一些距离,WLAN无线网络接口将自动降低传输速率,但只有在需要保持无线连接时才会这样。如果再相互靠近一些,自动选择传输速率机制又将自动提高传输速率,以达到尽可能最高的传输速率并提供可靠通信。如果通信失败,无线客户机适配器将以相同的数据传输速率重新传输“丢失的报文”。如果第二次尝试也失败了,无线接口将自动切换至另一种较低的传输速率,然后再次尝试传输。数据传输速率越低,无线范围越大,从而有助于传输报文。 相似文献
9.
文章介绍了利用Visual Basic开发的一个自动监控系统以及通信控件在编制串口通信程序中的应用。 相似文献
10.
程雪敏 《电子制作.电脑维护与应用》2023,(19):26-29
本课题主要是基于STM32F103C8T6的一款游泳池用恒温智能控制系统的设计与研究,随着嵌入式技术的发展,人们对这方面研究的加深,利用单片机技术从而对游泳池实现恒温控制不仅简单易操作而且方便灵活性大。本系统主要是由主控、加热器、调温旋钮、OLED显示、温度传感器、WiFi通信等组成,分为手动调节温度和自动感应调节两部分。本系统是通过无线通信接入互联网采用WiFi、MQTT通信协议与ONENET进行通信,实现现场操作和PC端ONENET云平台上远程操控调节水温温度,在无人情况下设定好温度会进行自动调节进行加热,运用防水数字型温度传感器探测线检测水温温度,实时显示水温并将数据通过串口通信上传到PC端,通过观察红色区域提示是否恒温,经过调设温度达到自动加热的效果利用硬件电路和软件控制实现上述功能。在现场也会有OLED显示屏将传感器感应的温湿度显示出来,更便于观察,同时也可以现场通过旋钮调节温度,在ONENET平台上可以调节温度上下限,以防止温度过高过低影响游泳池内恒温。 相似文献
11.
《Computers & Mathematics with Applications》2006,51(2):377-386
High quality traffic for networks is urgently needed for mobile communication systems. Mobile stations frequently become unavailable due to communication errors generated by network congestion. Traffic congestion in a network system may occur intermittently and continue for a length of time, sometimes causing communication errors. If congestions happens during communication, communication errors occur and the communication is rejected. This paper considers the problem of reliability in mobile communication systems during congestion by using a recovery scheme. We formulate a stochastic model of a mobile communication system which consists of mobile stations, several base stations and a switching center. When communication errors occur, the system makes a rollback recovery and returns to the recent checkpoint. We derive the mean time to take checkpoint and the expected number of rollback recoveries, handoff, and successful transmissions until communication errors occur. Further, we calculate the expected costs and discuss ways to minimize the costs by analyzing the optimal checkpoint intervals. 相似文献
12.
13.
功能安全的概念在汽车嵌入式系统领域越发到关注,汽车开放系统架构AUTOSAR(Automotive Open System Architecture)是目前国际流行的标准软件架构,它在AUTOSAR4.1的版本中针对功能安全首次提出了点到点(End-to-End,E2E)的安全通信机制;为保证汽车各组件间的通信安全,对在AUTOSAR架构下的E2E安全通信机制进行了研究,采用E2E Profile 2的方法来实现E2E安全通信,旨在解决如何保证电子控制单元(Electronic Control Unit,ECU)之间以及ECU内部不同核之间,不同SWC(software component)之间数据的安全通信的问题;基于AUTOSAR架构,通过在电子控制单元核内通信采用E2E Protection Wrapper的通信方式,跨电子控制单元核外通信采用COM E2E Callout的通信方式实现了通信机制的搭建;通过对ECU内部及跨ECU的通信测试,表明该方法能有效的检测通信过程中的重复发送错误、CRC(Cyclic Redundancy Check)校验和错误及发送序列错误等问题。 相似文献
14.
针对港口轮胎吊通信系统的现实通信环境和项目需求,提出了一种建立在UDP之上,进行16位CRC差错控制,基于显式速率的拥塞控制和确认机制,能够自动监测网络故障,自动恢复通信状态的高效可靠的数据通信协议。 相似文献
15.
We present agent metaphor as a novel interactive system to promote the efficiency in machine translation mediated communication. Machine translation is increasingly used to support multilingual communication. In the traditional, transparent-channel way of using machine translation for the multilingual communication, translation errors are ignorable, due to the quality limitation of current machine translators. Those translation errors will break the communication and lead to miscommunication. We propose to shift the paradigm from the transparent-channel metaphor to the human-interpreter metaphor, which motives the interactions between the users and the machine translator. Following this paradigm shifting, the interpreter (agent) encourages the dialog participants to collaborate, as their interactivity will be helpful in reducing the number of translation errors, the noise of the channel. We examine the translation issues raised by multilingual communication, and analyze the impact of interactivity on the elimination of translation errors. We propose an implementation of the agent metaphor, which promotes interactivity between dialog participants and the machine translator. We design the architecture of our agent, analyze the interaction process, describe decision support and autonomous behavior, and provide an example of preparing repair strategy. We conduct an English-Chinese communication task experiment on tangram arrangement. The experiment shows that compared to the transparent-channel metaphor, our agent metaphor reduces human communication effort by 21.6%. 相似文献
16.
随着因特网的飞速发展,基于IP网络的视频通信越来受到重视,但由于IP网络属于易于发生差错的信道,因此,基于IP网络的视频业务必须要到信道差错的影响,为了抗信道差错,差错复原技术已成为易发生差错信道下视频编码的重视组成部分,针对IP网络时常发生拥塞和带宽经常变动而造成的数据分组丢失,时延和抖动问题,提出了用于IP网络的差错复原技术综合应用解决方案,该方案通过综合运用多种差错原复技术,大大提高了压缩码流的抗差错能力和解码器和差错复原能力,同时应用该方案实现了具有差错复原性能的H.263、H.26L视频编码解器。利用Internet网络模型对编解码器的差错复原能力进行了实验,实验结果表明,该视频编解码器具有良好的差错复原性能,重图象的主客观质量得到了明显的改善。 相似文献
17.
Nakajo T. Azuma I. Tada M. 《IEEE transactions on pattern analysis and machine intelligence》1993,19(8):765-773
The authors discuss information transmission errors occurring between design engineers involved in software development and describe an interface design documentation system that can prevent them. The equivalence of human errors in software design and hardware manufacturing activities is established. The characteristics that must be included in an interface documentation system to prevent communication errors in software design activities, based on foolproofing principles that were identified for hardware manufacturing, are discussed. Utilizing these characteristics, an example of an interface documentation system for software products which control measuring equipment is presented. Its effects on the resultant number of communication errors between hardware and software engineers is subsequently experimentally evaluated 相似文献
18.
针对井下通信信道的特点 ,介绍了一种信道编码方式 ,其能有效地纠正井下数字通信中常见的突发错误 ,对提高井下通信的可靠性有着重要作用 相似文献
19.
本文提出了基于现场保存与恢复的双核冗余软错误恢复执行模型DCR。该执行模型在两个冗余的内核上执行相同的线程,并对store指令进行比较。本文对每个内核增加了硬件实现的现场保存与恢复机制,在检测到软错误以后可以恢复到上一现场保存点继续执行。实验结果表明,与传统的软错误恢复执行模型CRTR相比,DCR执行模型对核间通信带宽的需求降低了57.5%。在发生软错误的情况下,DCR能够恢复99.69%的软错误。 相似文献
20.
A technique is described for automatic validation of communication protocols that are given in the form of regular protocol diagrams. It is based on the use of the link state introduced by West [2], but it has the advantage of not requiring that the state transition diagrams of the two communicating processes be available. The technique is applied to the validation of the CCITT X.21 protocol to illustrate the ease with which it can be used to detect reception errors, deadlock errors and overflow errors. 相似文献