A kinetic study on anaerobic reduction of sulphate, part II: incorporation of temperature effects in the kinetic model

The effects of temperature on the kinetics of anaerobic sulphate reduction were studied in continuous bioreactors using acetate as an electron donor. Across the range of temperatures applied from 20 to , the increasing of volumetric loading rate up to 0.08 to resulted in a linear increase in reduction rate of sulphate. The increasing reaction rate showed a lower dependence on volumetric loading rate in the range 0.1-. Further increase in volumetric loading rate above was accompanied by wash out of bacterial cells and a sharp decrease in reaction rate. Despite a similar pattern for dependency of reaction rate on volumetric loading at all temperatures tested, the magnitude of reaction rate was influenced by temperature, with a maximum rate of observed at . The effect of temperature on maximum specific growth rate (μ_max) and bacterial yield was insignificant. The values of maximum specific growth rate and yield were and 0.56-0.60 kg bacteria (), respectively. The decay coefficient (k_d) and apparent saturation constant () were both temperature dependent. The increase of temperature resulted in decreased values of , and higher values for k_d. Using the experimental data effect of temperature was incorporated in a kinetic model previously developed for anaerobic reduction of sulphate.     

Synthesis, characterization and thermodynamic properties of poly(3-mesityl-2-hydroxypropyl methacrylate-co-N-vinyl-2-pyrrolidone)

Poly(3-mesityl-2-hydroxypropyl methacrylate-co-N-vinyl-2-pyrrolidone) P(MHPMA-co-VP) was synthesized in 1, 4-dioxane solution using benzoyl peroxide (BPO) as initiator at 60 °C. The copolymer was characterized by ¹H ¹³C NMR, FT-IR, DSC, TGA, size exclusion chromatography analysis (SEC) and elemental analysis techniques. According to SEC, the number-average molecular weight (M_n), weight-average molecular weight (M_w) and polydispersity index (PDI) values of PMHPMA-co-VP were found to be 58,000, 481,000 g/mol and 8.26, respectively. According to TGA, carbonaceous residue value of PMHPMA-co-VP was found to be 6% at 500 °C. Also, some thermodynamic properties of PMHPMA-co-VP such as the adsorption enthalpy, ΔH_a, molar evaporation enthalpy, ΔH_v, the sorption enthalpy, , sorption free energy, , sorption entropy, , the partial molar free energy, , the partial molar heat of mixing, , at infinite dilution was determined for the interactions of PMHPMA-co-VP with selected alcohols and alkanes by inverse gas chromatography (IGC) method in the temperature range of 323-463 K. According to the specific retention volumes, , the weight fraction activity coefficients of solute probes at infinite dilution, , and Flory-Huggins interaction parameters, between PMHPMA-co-VP-solvents were determined in 413-453 K. According to and , selected alcohols and alkanes were found to be non-solvent for PMHPMA-co-VP at 413-453 K. The glass transition temperature, T_g, of the PMHPMA-co-VP found to be 370 and 363 K, respectively, by IGC and DSC techniques, respectively.     

Carbon dioxide absorption with aqueous potassium carbonate promoted by piperazine

Many commercial processes for the removal of carbon dioxide from high-pressure gases use aqueous potassium carbonate systems promoted by secondary amines. This paper presents thermodynamic and kinetic data for aqueous potassium carbonate promoted by piperazine. Research has been performed at typical absorber conditions for the removal of CO₂ from flue gas.Piperazine, used as an additive in 20- potassium carbonate, was investigated in a wetted-wall column using a concentration of at 40-80°C. The addition of piperazine to a potassium carbonate system decreases the CO₂ equilibrium partial pressure by approximately 85% at intermediate CO₂ loading. The distribution of piperazine species in the solution was determined by proton NMR. Using the speciation data and relevant equilibrium constants, a model was developed to predict system speciation and equilibrium.The addition of piperazine to potassium carbonate increases the rate of CO₂ absorption by an order of magnitude at 60°C. The rate of CO₂ absorption in the promoted solution compares favorably to that of MEA. The addition of piperazine to potassium carbonate increases the heat of absorption from 3.7 to . The capacity ranges from 0.4 to for PZ/K₂CO₃ solutions, comparing favorably with other amines.     

Effect of fiber length distribution on gas holdup in a cocurrent air-water-fiber bubble column

An experimental investigation is reported on the effect of fiber length distribution on gas holdup in a cocurrent air-water-fiber bubble column. Different combinations of 1 and 3 mm Rayon fibers are used to simulate different fiber length distributions. At a constant total fiber mass fraction, gas holdup generally decreases with increasing mass fraction of the 3 mm Rayon fiber while other conditions remain constant. Crowding factors estimated using four different methods (N_c=N_c,A, , N_c,L, and N_c,M) and the parameters and are tested on their performance to quantify the overall effects of fiber mass fraction and fiber length and its distribution on gas holdup. and provide the best characterization of the fiber effects on gas holdup in the cocurrent air-water-fiber bubble column. The crowding factor estimated using the model-based average fiber length (N_c,M) also provides a good characterization and is better than the other crowding factor definitions.     

Anomalous IR optical properties of aggregates of Pd nanoparticles induced through electrochemical cyclic voltammetry

IR optical properties of Pd nanoparticles with different size and aggregation state were studied in the current paper. The dispersed Pd nanoparticles () stabilized with poly(N-vinylpyrrolidone) (PVP) were synthesized by the seeding growth method, in which the seeds were formed step by step through reducing H₂PdCl₄ with ethanol. The dispersed Pd nanoparticles of much large size () were grown from the by keeping the colloid of undisturbed for 150 days at room temperature around 20 °C. The aggregates of () were prepared through an agglomeration process induced during a potential cyclic scanning between −0.25 V and 1.25 V for 20 min at a scan rate of 50 mV s⁻¹. Scanning electron microscope (SEM) patterns confirmed such aggregation of . Fourier transform infrared (FTIR) spectroscopy together with CO adsorption as probe reaction was employed in studies of IR optical properties of the prepared Pd nanoparticles. The results demonstrated that CO adsorbed on films substrated on CaF₂ IR window or glassy carbon (GC) electrode yielded two strong IR absorption bands around 1970 cm⁻¹ and 1910 cm⁻¹, which were assigned to IR absorption of CO bonded on asymmetric and symmetric bridge sites, respectively. Similar IR bands were observed in spectra of CO adsorbed on films, except the IR bands were much weak, whereas CO adsorbed on film produced an IR absorption band near 1906 cm⁻¹, and an anomalous IR absorption band whose direction has been completely inverted around 1956 cm⁻¹. The direction inversion of the IR band of CO bonded to asymmetric bridge sites on was ascribed to the interaction between Pd nanoparticles inside the aggregates. Based on FTIR spectroscopic and cyclic voltammetric results, the aggregation mechanism of Pd nanoparticles from to has been suggested that the agglomeration of Pd nanoparticles was driven by the alteration of electric field across electrode-electrolyte interface, when the PVP stabilizer was stripped via oxidation during cyclic voltammetry.     

A generalized analysis on material invariant characteristics for microwave heating of slabs

A generalized dimensionless formulation has been developed to predict the spatial distribution of microwave power and temperature. The ‘dimensionless analysis’ is mainly based on three numbers: wave number, ; free space wave number, ; and penetration number, , where is the ratio of sample thickness to wavelength of microwaves within a material, is based on wavelength within free space and is the ratio of sample thickness to penetration depth. The material dielectric properties and sample thicknesses form the basis of these dimensionless numbers. The volumetric heat source due to microwaves can be expressed as a combination of dimensionless numbers and electric field distributions. The spatial distributions of microwave power for uniform plane waves can be obtained from the combination of transmitted and reflected waves within a material. Microwave heating characteristics are obtained by solving energy balance equations where the dimensionless temperature is scaled with respect to incident microwave intensity. The generalized trends of microwave power absorption are illustrated via average power plots as a function of , and . The average power contours exhibit oscillatory behavior with corresponding to smaller for smaller values of . The spatial distributions of dimensionless electric fields and power are obtained for various and . The spatial resonance or maxima on microwave power is represented by zero phase difference between transmitted and reflected waves. It is observed that the number of spatial resonances increases with for smaller regimes whereas the spatial power follows the exponential decay law for higher regimes irrespective of and . These trends are observed for samples incident with microwaves at one face and both the faces. The heating characteristics are shown for various materials and generalized heating patterns are shown as functions of , and . The generalized heating characteristics involve either spatial temperature distributions or uniform temperature profiles based on both thermal parameters and dimensionless numbers ().     

Electrochemical performances of gel polymer electrolytes using tetra(ethylene glycol) diacrylate

A gel polymer electrolyte (GPE) was prepared using tetra(ethylene glycol) diacrylate monomer, benzoyl peroxide, and (). The LiCoO₂/GPE/graphite cells were prepared and their electrochemical properties were evaluated at various current densities and temperatures.The viscosity of the precursor containing the tetra(ethylene glycol) diacrylate monomer was around . The ionic conductivity of the gel polymer electrolyte at 20°C was around . The gel polymer electrolyte had good electrochemical stability up to vs. Li/Li⁺. The capacity of the LiCoO₂/GPE/graphite cell at rate was 63% of the discharge capacity at rate. The capacity of the cell at −10°C was 81% of the discharge capacity at 20°C. Discharge capacity of the cell with gel polymer electrolyte was stable with charge-discharge cycling.     

Gas-liquid mass transfer in a circulating jet-loop nitrifying MBR

Based on airlift configuration, a novel circulating jet-loop submerged membrane bioreactor (JLMBR) adapted to ammonium partial oxidation has been developed. Membrane technology and combined air and water forced circulation are adopted to obtain a high biomass retention time and to achieve a separate control of mixing and aeration. This study is intended to determine how gas-liquid mass transfer is affected by operating conditions. In a first approximation, liquid was assumed to be perfectly mixed. A classical non-steady state clean water test, known as the “gas out-gas in” method, was used to determine the gas-liquid mass transfer coefficient k_La. Air and recirculated liquid superficial velocities were gradually increased from 0.013 to and 0.0056 to , respectively. Subsequently, the gas-liquid mass transfer coefficient k_La varied from 0.01 to . It appears to be influenced by the combined action of air and recirculated liquid flowrates in the range and , respectively, for air and liquid. Correlations are proposed to describe this double influence. Experiments were performed on tap water and a culture medium used for the autotrophic growth of nitrifying bacteria, respectively. Oxygen transfer appeared to be not significantly affected by the mineral salt encountered in this medium.     

Oxidation kinetics of Iron(II) complexes of trans-1,2-diaminocyclohexanetetraacetate (cdta) with dissolved oxygen: Reaction mechanism, parameters of activation and kinetic salt effects

The present investigation takes concern about a spiny environmental problem afflicting the pulp mill industry exploiting the Kraft sulfate-pulp process where dilute total reduced sulfur contaminants are co-mixed with oxygen in large-volume gas effluents. A potential Redox process for removing the total reduced sulfurs consists in oxidizing them by means of iron(III) organometallic complexes while the co-mixed oxygen mediates the oxidative regeneration of iron(II) into iron(III) complexes. In this work, the oxidation kinetics of iron(II) trans-1,2,-diaminocyclohexanetetraacetate (cdta) complexes with molecular oxygen (O₂) as the source oxidant was investigated for a wide pH range (1.75<pH<12) in a 3.2 dm³ single-phase stirred cell reactor within the [281-323 K] temperature range. Simultaneous measurements of iron(II)-cdta (50-) and O₂ (0.5-) were used to clarify the reaction mechanism which has been interpreted differently in previous works. The observed kinetic data in alkaline solutions could be accounted for in terms of three forward [Fe²⁺cdta^4-+O₂ (rate-limiting, k_1,app), , 2Fe²⁺cdta^4-+H₂O₂] and one reverse [ (k_-1,app,n=0 or 1)] elementary steps. Assessment of the rate-limiting apparent rate constant led to the following results ( at and , , ). Fe³⁺OH^-cdta^4-, being the dominating iron(III) product at pH>10, was found to be less reactive than Fe³⁺cdta^4- with the superoxide intermediate , thus reducing the effect of the reverse step at higher pH. A study on the effect of electrolytes on the reaction rate led to the conclusion that salts increase the rate constant k_1,app. Finally, kinetic results in acidic conditions leading to the formation of other iron(II)-cdta complexes (i.e., Fe²⁺cdta^4-H⁺) and another superoxide intermediates are reported and discussed.