Multiscale assessment of methylarsenic reactivity in soil. 2. Distribution and speciation in soil

Methylated forms of arsenic (As), monomethylarsenate (MMA) and dimethylarsenate (DMA), have historically been used as herbicides and pesticides. Because of their large application to agriculture fields and the toxicity of MMA and DMA, the distribution, speciation, and sorption of methylated As to soils requires investigation. Monomethylarsenate and DMA were reacted with a soil up to one year under aerobic and anaerobic conditions. Microsynchrotron based X-ray fluorescence (μ-SXRF) mapping studies showed that MMA and DMA were heterogeneously distributed in the soil and were mainly associated with iron oxyhydroxides, e.g., goethite, in the soil. Micro-X-ray absorption near edge structure (XANES) spectra collected from As hotspots showed MMA and DMA were demethylated to arsenate over one year incubation under aerobic conditions. Monomethylarsenate was methylated to DMA, and DMA was maintained as DMA over a 3 month incubation under anaerobic conditions. Arsenic-iron precipitation, such as the formation of scorodite (FeAsO(4)·2H(2)O), was not observed, indicating that MMA and DMA were mainly associated with Fe-oxyhydroxides as sorption complexes.     

Sorption-desorption of ionogenic compounds at the mineral-water interface: study of metal oxide-rich soils and pure-phase minerals

Sorption of the ionic compounds 2,4-D and quinmerac onto iron oxide-rich, variable charged soils was strongly influenced by mineralogy, particularly soil iron and aluminum oxides, whereas sorption of the neutral norflurazon was only related to total soil C. An appreciable fraction of the mass sorbed in stirred-flow studies was easily desorbed by deionized water, and desorption of ionic compounds was initially more rapid than sorption. This sorption-desorption behavior, although contrary to desorption hysteresis commonly observed in batch studies, suggests that the reversibly sorbed fraction is weakly bound to the soil surface. 2,4-D sorption to iron oxide-rich soils and pure-phase metal oxides appears to be driven by nonspecific electrostatic attraction, with specific electrostatic attraction and van der Waals interactions being secondary. Both the carboxylate and the heterocyclic N groups may participate in sorption of quinmerac, facilitated by specific and nonspecific electrostatic attraction and surface complexation. The heterocyclic N, amine, and carbonyl groups of norflurazon do not appear to interact with soil minerals.     

Sorption and desorption of Cd2+ and Zn2+ ions in apatite-aqueous systems

As a low-soluble phosphate mineral capable of binding various metal ions, apatite can be used to immobilize toxic metals in soils and waters. In the present research the factors affecting sorption and desorption of Cd2+ and Zn2+ ions on/from apatites are investigated. Batch experiments were carried out using synthetic hydroxy-, fluoride-, and carbonate-substituted apatites having various specific surface area (SSA). Apatite sorption capacity was found to depend mainly on its SSA, ranging from 16 to 78 and from 11 to 79 mmol per 100 g of apatite for Cd2+ and Zn2+, respectively. The solution composition (pH, and presence of Cl- and NO3- ions) had no essential impact on sorption. Desorption of bound cations depended both on the sorption level and solution composition. The amount of desorbed Cd2+ and Zn2+ increased proportionally to the amount of sorbed cations. However, apatites having higher sorption capacity release relatively less sorbed cations. Desorption increases with increasing Ca2+ concentration in the solution, reaching 8-20% of sorbed Cd2+ in 0.002 M, 10-35% in 0.01 M, and 33-45% in 0.05 M Ca(NO3)2 solution. Compared to nitrate solutions, the presence of Cl- ions in the solution promotes the release of bound cations. Desorption of Zn2+ is slightly higher than that of Cd2+. The desorption mechanism was assumed to include both ion-exchange and adsorption of Ca2+ ions on apatite surface.     

Critical evaluation of desorption phenomena of heavy metals from natural sediments

In natural sediments, the majority of heavy metal ions are generally associated with the solid phase. To become bioavailable, the metal ions must desorb from the solid. Numerous studies of heavy metals in sediments have suggested that sorption and desorption exhibit hysteresis (i.e., the two processes are not reversible), while other studies have suggested that desorption hysteresis does not exist. In this study, sorption/desorption hysteresis of lead (Pb) and cadmium (Cd) was evaluated over the following range of conditions: (i) desorption induced by replacing the supernatant liquid with contaminant-free electrolyte solution; (ii) desorption induced by lowering the solution pH with mineral acid; and (iii) desorption induced by sequestration with EDTA. Given the importance of dissolved organic and inorganic ligands in regulating heavy metal behavior in nature sediments, sorption/desorption experiments were conducted on both untreated and prewashed sediments. Prewashing treatment increases the sorption potential of Cd but not Pb. Desorption hysteresis is observed in both the untreated and the prewashed sediments using the replaced supernatant method, and the desorption hysteresis appears to increase with aging time. Hysteresis is not observed when desorption is initiated by lowering the solution pH. A large fraction of the sorbed heavy metal ions can be easily desorbed by EDTA; between 0.04 and 1.2 mmol/kg Cd and Pb ions are resistant to desorption.     

Coprecipitation of arsenate with metal oxides: nature, mineralogy, and reactivity of aluminum precipitates

Arsenic mobilization in soils is mainly controlled by sorption/desorption processes, but arsenic also may be coprecipitated with aluminum and/or iron in natural environments. Although coprecipitation of arsenic with aluminum and iron oxides is an effective treatment process for arsenic removal from drinking water, the nature and reactivity of aluminum- or iron-arsenic coprecipitates has received little attention. We studied the mineralogy, chemical composition, and surface properties of aluminum-arsenate coprecipitates, as well as the sorption of phosphate on and the loss of arsenate from these precipitates. Aluminum-arsenate coprecipitates were synthesized at pH 4.0, 7.0, or 10.0 and As/Al molar ratio (R) of 0, 0.01, or 0.1 and were aged 30 or 210 d at 50 degrees C. In the absence of arsenate, gibbsite (pH 4.0 or 7.0) and bayerite (pH 10.0) formed, whereas in the presence of arsenate, very poorly crystalline precipitates formed. Short-range ordered materials (mainly poorly crystalline boehmite) formed at pH 4.0 (R = 0.01 and 0.1), 7.0, and 10.0 (R= 0.1) and did not transform into Al(OH)3 polymorphs even after prolonged aging. The surface properties and chemical composition of the aluminum precipitates were affected by the initial pH, R, and aging. Chemical dissolution of the samples by 6 mol L(-1) HCl and 0.2 mol L(-1) oxalic acid/ oxalate solution indicated that arsenate was present mainly in the short-range ordered precipitates. The sorption of phosphate onto the precipitates was influenced by the nature of the samples and the amounts of arsenate present in the precipitates. Large amounts of phosphate partially replaced arsenate only from the samples formed at R = 0.1. The quantities of arsenate desorbed from these coprecipitates by phosphate increased with increasing phosphate concentration, reaction time, and precipitate age butwere always lessthan 30% of the amounts of arsenate present in the materials and were particularly low (<4%) from the sample prepared at pH 4.0. Arsenate appeared to be occluded within the network of short-range ordered materials and/or sorbed onto the external surfaces of the precipitates, but sorption on the external surfaces seemed to increase by increasing pH of sample preparation and aging. Furthermore, at pH 4.0 more than in neutral or alkaline systems the formation of aluminum arsenate precipitates seemed to be favored. Finally, we have observed that greater amounts of phosphate were sorbed on an aluminum-arsenate coprecipitate than on a preformed aluminum oxide equilibrated with arsenate under the same conditions (R = 0.1, pH 7.0). In contrast, the opposite occurred for arsenate desorption, which was attributed to the larger amounts of arsenate occluded in the coprecipitate.     

Enhanced soil washing of phenanthrene by mixed solutions of TX100 and SDBS

Increased desorption of hydrophobic organic compounds (HOCs) from soils and sediments is a key to the remediation of contaminated soils and groundwater. In this study, phenanthrene desorption from a contaminated soil by mixed solutions of a nonionic surfactant(octylphenol polyethoxylate, TX100) and an anionic surfactant (sodium dodecylbenzenesulfonate, SDBS) was investigated. Phenanthrene desorption depended on not only aqueous surfactant concentrations and phenanthrene solubility enhancement but also the soil-sorbed surfactant amount and the corresponding sorption capacity of sorbed surfactants. The added surfactant critical desorption concentrations (CDCs) for phenanthrene from soil depended on both sorbed concentrations of surfactants and their critical micelle concentrations (CMCs). Phenanthrene desorption by mixed solutions was more efficient than individual surfactants due to the low sorption loss of mixed surfactants to soil. Among the tested surfactant systems, mixed TX100 and SDBS with a 1:9 mass ratio exhibited the highest phenanthrene desorption. Mixed micelle formation, showing negative deviation of CMCs from the ones predicted by the ideal mixing theory, was primarily responsible for the significant reduction of soil-sorbed amounts of TX100 and SDBS in their mixed systems. Therefore, mixed anionic-nonionic surfactants had great potential in the area of enhanced soil and groundwater remediation.     

Influence of rhamnolipids and triton X-100 on the desorption of pesticides from soils

A rhamnolipid biosurfactant mixture produced by P. aeruginosa UG2 and the surfactant Triton X-100 were tested for their effectiveness of enhancing the desorption of trifluralin, atrazine, and coumaphos from soils. Sorption of both surfactants by the soils was significant and adequately described by the Langmuir-type isotherm. Values of maximum sorption capacity (Qmax) and Langmuir constant (Klang) did not correlate with the amount of soil organic matter. Our results indicate that clay surfaces play an important role in the sorption of surfactants. When surfactant dosages were high enough to reach soil saturation and maintain an aqueous micellar phase, pesticide desorption was only enhanced. At dosages below soil saturation, surfactants sorbed onto soil, increasing its hydrophobicity and enhancing the sorption of the pesticides by a factor of 2. Similar values of water-soil partition coefficients (Ksol*) for aged and fresh added pesticides to soils indicate that the aging process used did not significantly after the capability of either surfactant to desorb the pesticides. A model able to estimate equilibrium distributions of organic compounds in soil-aqueous-micellar systems was tested against experimental results. The determined organic carbon partition coefficients, Koc values, indicate that, on a carbon normalized basis, sorbed Rh-mix is a much better sorbent of pesticides than TX-100 or soil organic matter. These results have significant implications on determining the effectiveness of surfactants to aid soil remediation technologies.     

Mechanisms of photocatalytical degradation of monomethylarsonic and dimethylarsinic acids using nanocrystalline titanium dioxide

Photodegradation mechanisms of monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA) with nanocrystalline titanium dioxide under UV irradiation were investigated. In the presence of UV irradiation and 0.02 g/L TiO2, 93% MMA (initial concentration is 10 mg-As/L) was transformed into inorganic arsenate, [As(V)], after 72 h of a batch reaction. The mineralization of DMA to As(V) occurred in two steps with MMA as an intermediate product. The photodegradation rate of MMA and DMA could be described using first-order kinetics, where the apparent rate constant is 0.033/h and 0.013/h for MMA and DMA, respectively. Radical scavengers, including superoxide dimutase (SOD), sodium bicarbonate, tert-butanol, and sodium azide, were used to study the photodegradation mechanisms of MMA and DMA. The results showed that hydroxyl radicals (HO*) was the primary reactive oxygen species for the photodegradation of MMA and DMA. The methyl groups in MMA and DMAweretransformed into organic carbon, including formic acid and possibly methanol, also through photochemical reactions. The results showed that nanocrystalline TiO2 can be used for the photocatalytical degradation of MMA and DMA and subsequent removal of the converted As(V), since the high adsorption capacity of the material for inorganic arsenic species has been demonstrated in previous studies.     

Sorption and desorption of perchlorate and U(VI) by strong-base anion-exchange resins

This study investigated the sorption affinity and capacity of six strong-base anion-exchange (SBA) resins for both uranium [U(VI)] and perchlorate (ClO4-) in simulated groundwater containing varying concentrations of sulfate (SO4(2-)). Additionally, desorption of U(VI) from spent resins was studied to separate U(VI) from resins with sorbed ClO4- for waste segregation and minimization. Results indicate that all SBA resins investigated in this study strongly sorb U(VI). The gel-type polyacrylic resin (Purolite A850) showed the highest sorption affinity and capacityfor U(VI) butwasthe least effective in sorbing ClO4-. The presence of SO4(2-) had little impact on the sorption of U(VI) but significantly affected the sorption of ClO4-, particularly on monofunctional SBA resins. A dilute acid wash was found to be effective in desorbing U(VI) but ineffective in desorbing ClO4- from bifunctional resins (Purolite A530E and WBR109). A single wash removed approximately 75% of sorbed U(VI) but only approximately 0.1% of sorbed ClO4- from the bifunctional resins. On the other hand, only 21.4% of sorbed U(VI) but approximately 34% of sorbed ClO4- was desorbed from the Purolite A850 resin. This study concludes that bifunctional resins could be used effectively to treatwater contaminated with ClO4- and traces of U(VI), and dilute acid washes could minimize hazardous wastes by separating sorbed U(VI) from ClO4- prior to the regeneration of the spent resin loaded with ClO4-.     

Assessing sequestration of selected polycyclic aromatic hydrocarbons by use of adsorption modeling and temperature-programmed desorption

Sequestration of phenanthrene and pyrene was investigated in two soils--a sandy soil designated SBS and a silt-loam designated LHS--by combining long-term batch sorption studies with thermal desorption and pyrolysis of amended soil samples. The Polanyi-based adsorption volume and the adsorbed solute mass increased with aging for both soils, thus demonstrating the mechanism for observed sequestration. Despite rigorous thermal analysis, 30-62% (SBS sand) and 8-30% (LHS silt-loam) of phenanthrene could not be recovered after 30-270 days of sorption, with the increase in desorption resistance showing greater significance in SBS sand. For both soils, these values were 20-65% of adsorbed phenanthrene mass. Activation energies estimated from the temperature-programmed desorption (TPD) of sorbed phenanthrene at < or = 375 degrees C were 51-53 kJ/mol, consistent with values derived for desorption of organic compounds from humic materials. The activated first-order model fitting of observed TPD data supports the conclusion that the desorption-resistant fraction of phenanthrene has become sequestered onto condensed organic domains and requires temperatures exceeding 600 degrees C to be released. The work demonstrates the use of thermal analysis in complementing the Polanyi-based adsorption modeling approach for assessing the mechanistic basis for sequestration of organic contaminants in soils.     

Time-dependent sorption-desorption behavior of 2,4-dichlorophenol and its polymerization products in surface soils

Contact time-dependent sorption-desorption of 2,4-dichlorophenol (DCP) and DCP polymerization products (DPP) was investigated in the context of agricultural and woodland soils. DPP was generated in soil slurry reactors by the addition of H2O2 to solutions containing horseradish peroxidase (HRP) and DCP. Size-exclusion chromatography confirmed the formation of oligomeric products including dimers, trimers, and tetramers. DCP removal from HRP-amended, soil-free solutions occurred as a result of DPP formation and sorption of DCP to the oligomeric precipitate. In reactors containing soil particles, additional removal occurred due to sorption of residual DCP and DPP to the soil. Sorption of DCP and DPP to the surface soils was rapid and appeared to be complete within 1 day. DPP sorbed to a greater extent than DCP, especially at higher solute concentrations. Water-extraction data indicated that while sorbed DCP was readily released into solution, sorbed DPP was more resistant to desorption. Both DCP and DPP were more readily extracted from the woodland soil than the agricultural soil. Solute extractability decreased with contact time, indicating that sorbent-solute interactions proceeded long after apparent sorption equilibrium at the particle or aggregate scale. Results from this study show that "slow" sorption processes occurring at the molecular scale continue long after apparent sorption equilibrium at the particle scale. This "aging effect" was operational over longer periods for DPP than the parent DCP, thereby ensuring long-term reductions in contaminant mobility in soils treated with peroxidase enzyme.     

Particle-size dependent sorption and desorption of pesticides within a water-soil-nonionic surfactant system

Although nonionic surfactants have been considered in surfactant-aided soil washing systems, there is little information on the particle-size dependence of these processes, and this may have significant implications for the design of these systems. In this study, Triton-100 (TX) was selected to study its effect on the sorption and desorption of two pesticides (Atrazine and Diuron) from different primary soil size fractions (clay, silt, and sand fractions) under equilibrium sorption and sequential desorption. Soil properties, TX sorption, and pesticide sorption and desorption all exhibited significant particle-size dependence. The cation exchange capacity (CEC) of the bulk soils and the soil fractions determined TX sorption capacity, which in turn determined the desorption efficiency. Desorption of pesticide out of the clay raction is the limiting factor in a surfactant-aided washing system. The solubilization efficiency of the individual surfactant micelles decreased as the amount of surfactant added to the systems increased. Thus, instead of attempting to wash the bulk soil, a better strategy might be to either (1) use only the amount of surfactant that is sufficient to clean the coarse fraction, then separate the fine fraction, and dispose or treat it separately, or (2) to separate the coarse fractions mechanically and then treatthe coarse and fine fractions separately. These results may be applicable to many other hydrophobic organic compounds such as polyaromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) strongly sorbed onto soils and sediments.     

Fate and transport of testosterone in agricultural soils

Hormones excreted in animal waste have been measured in surface and groundwater associated with manure that is applied to the land surface. Limited studies have been done on the fate and transport of androgenic hormones in soils. In this study, batch and column experiments were used to identify the fate and transport of radiolabeled [14C] testosterone in agricultural soils. The batch results indicated that aqueous-phase concentrations decreased for the first 5 h and then appeared to increase through time. The first-order sorption kinetics ranged from 0.08 to 0.640 h(-1) for the first 5 h. Beyond 5 h the increase in aqueous 14C could have been caused by desorption of testosterone back into the aqueous phase. However, metabolites were also produced beyond 5 h and would have likely resulted in the increase in aqueous 14C by sorption site competition and/or by lower sorption affinity. There were weak correlations of sorption with soil particle size, organic matter, and specific surface area. Testosterone was the dominant compound present in the soil column effluents, and a fully kinetic-sorption, chemical nonequilibrium model was used to describe the data. Column experiment sorption estimates were lower than the batch, which resulted from rate-limiting sorption due to the advective transport. The column degradation coefficients (0.404-0.600 h(-1)) were generally higher than values reported in the literature for 17beta-estradiol. Although it was found that testosterone degraded more readily than 17beta-estradiol, it appeared to have a greater potential to migrate in the soil because it was not as strongly sorbed. This study underlined the importance of the simultaneous transformation and sorption processes in the transport of hormones through soils.     

Physicochemical properties related to long-term phosphorus retention by drinking-water treatment residuals

Drinking-water treatment residuals (WTRs) are nonhazardous materials that can be obtained free-of-charge from drinking-water treatment plants to reduce soluble phosphorus (P) concentrations in poorly P sorbing soils. Phosphorus sorption capacities of WTRs can vary 1-2 orders of magnitude, on the basis of short-term equilibration times (up to 7 d), but studies dealing with long-term (weeks to months) P retention by WTRs are lacking. Properties that most affect long-term P sorption capacities are pertinent to the efficacy of WTRs as amendments to stabilize P in soils. This research addressed the long-term (up to 80 d) P sorption/desorption characteristics and kinetics for seven WTRs, including the influence of specific surface area (SSA), porosity, and total C content on the overall magnitude of P sorption by seven WTRs. The data confirm a strong but variable affinity for P by WTRs. Aluminum-based WTRs tended to have higher P sorption capacity than Fe-based WTRs. Phosphorus sorption with time was biphasic in nature for most samples and best fit to a second-order rate model. The P sorption rate dependency was strongly correlated with a hysteretic P desorption, consistent with kinetic limitations on P desorption from micropores. Oxalate-extractable Al + Fe concentrations of the WTRs did not effectively explain long-term (80 d) P sorption capacities of the WTRs. Micropore (CO2-based) SSAs were greater than BET-N2 SSAs for most WTRs, except those with the lowest (<80 g kg(-1)) total C content. There was a significant negative linear correlation between the total C content and the CO2/N2 SSA ratio. The data suggest that C in WTRs increases microporosity, but reduces P sorption per unit pore volume or surface area. Hence, variability in C content confounds direct relations among SSA, porosity, and P sorption. Total C, N2-based SSA, and CO2-based SSAs explained 82% of the variability in the long-term P sorption capacities of the WTRs. Prediction of long-term P sorption capacities for different WTRs may be achieved by taking into account the three proposed variables.     

Kinetic controls on Cu and Pb sorption by ferrihydrite

Metal partitioning in ferrihydrite suspensions may reach equilibrium only after a long reaction time. To determine key factors controlling the kinetics, we measured Cu and Pb uptake as a function of ferrihydrite morphology, reaction temperature, metal competition, and fulvic acid concentration over a period of 2 months. X-ray microscopy, which was used to probe ferrihydrite morphology in suspension, showed that drying irreversibly converted the gellike structure of fresh precipitate into dense aggregates. These dense aggregates sorbed Cu and Pb much slower than the gel. Temperature had a more pronounced effect on the kinetics of metal uptake by ferrihydrite gel than by dense ferrihydrite. Independently of treatment and time, Cu and Pb were bound to the ferrihydrite surface byformation of edge-sharing inner-sphere sorption complexes as confirmed by X-ray absorption fine-structure (XAFS) spectroscopy. This invariable binding mechanism, together with the observed effects of morphology and temperature, are in line with surface diffusion limiting the slow sorption process. The quantification of diffusion-limited surface sites in soils and sediments and the subsequent estimation of the effect of reaction time and temperature will be a challenge for properly predicting the fate of metals in the environment.     

Effect of two organic amendments on norflurazon retention and release by soils of different characteristics

The influence of two organic amendments on norflurazon sorption-desorption processes in four soils with very different physicochemical characteristics was studied in laboratory experiments to evaluate the potential leaching of this pesticide through organic fertilized soils. Sorption-desorption experiments were performed on original soils and on a mixture of these soils with urban waste compost (SUW) and a commercial amendment from olive-mill wastes (OW), at a rate of 6.25% (w/w). These mixtures were used immediately after preparation and after aging for 2 months. Norflurazon was analyzed by using a HPLC method. Norflurazon retention in original soils was related not only to the organic matter (OM) content but also to mineral surfaces present in soils. Norflurazon sorption increases largely after amendment in soils with low OM content, but the addition of exogenous OM to soils with medium OM content and/or other available adsorptive surfaces did not significantly affect norflurazon sorption. Even in some cases pesticide sorption decreases, due to the blocking of the mineral and organic soil surfaces with the amendment added. Transformation of exogenous OM during incubation depends both on the amendment added and on the type of soil and can affect sorption-desorption behavior of the soils surfaces in different manner, due to the modification of their hydrophobic-hydrophilic characteristics. Norflurazon desorption from original soils showed hysteresis in all cases, but it was not affected or even decreased in amended soils. It was a nonexpected behavior, especially in sandy soil, since it is generally assumed that a higher sorption always implies a lower mobility in soils. Norflurazon sorption must be taking place on very low affinity sites on exogenous OM through weak bindings, from which the pesticide can be easily desorbed. The application to soils of the organic amendments used in the present study could not be accepted to reduce norflurazon losses due to leaching processes.     

Pesticide sorption and desorption by lignin described by an intraparticle diffusion model

Lignin was used as a model compound for soil organic matter to gain insight into the mechanisms that control the kinetics of pesticide sorption and desorption. Hydrolytic lignin was immobilized in a matrix of alginate gel, and sorption-desorption experiments were undertaken with isoproturon. Sorption increased with time and was close to equilibrium after 14 days. Desorption was measured after sorption for different time intervals and for a number of successive desorption steps of different lengths. The results showed strong differences between the sorption and desorption isotherms. The ratio of sorbed to dissolved pesticide approached and even exceeded the equilibrium ratio, depending on the number of desorption steps and the length of each equilibration period. A numerical diffusion model was developed to describe radial diffusion into the lignin particles in combination with Freundlich sorption inside the particles. Key model parameters were adjusted to fit the sorption data, and the same parameters were then used to predict stepwise desorption. Desorption was well described by the model, which suggests that sorption and desorption were driven by the same mechanism and occurred at the same rate. The observed difference between the sorption and desorption isotherms could be fully explained by the nonattainment of equilibrium due to slow diffusion into and out of the lignin particles.     

X-ray absorption spectroscopy study of the effects of pH and ionic strength on Pb(II) sorption to amorphous silica

Pb(III) sorption to hydrous amorphous SiO2 was studied as a function of pH and ionic strength using XAS to characterize the sorption products formed. Pb sorption increased with increasing pH and decreasing ionic strength. The XAS data indicated that the mechanism of Pb(II) sorption to the SiO2 surface was pH-dependent. At pH < 4.5, a mononuclear inner-sphere Pb sorption complex with ionic character dominated the Pb surface speciation. Between pH 4.5 and pH 5.6, sorption increasingly occurred via the formation of surface-attached covalent polynuclear Pb species, possibly Pb-Pb dimers, and these were the dominant Pb complexes at pH > or = 6.3. Decreasing ionic strength from I = 0.1 to I = 0.005 M NaClO4 significantly increased Pb sorption but did not strongly influence the average local coordination environment of sorbed Pb at given pH, suggesting that the formation of mononuclear and polynuclear Pb complexes at the surface were coupled; possibly, Pb monomers control the formation of Pb polynuclear species by diffusion along the surface, or they act as nucleation centers for additional Pb uptake from solution. This study shows that the effectiveness of SiO2 in retaining Pb(II) is strongly dependent on solution conditions. At low pH, Pb(II) may be effectively remobilized by competition with other cations, whereas sorbed Pb is expected to become less susceptible to desorption with increasing pH. However, unlike for Ni(II) and Co(II), no lead phyllosilicates are formed at these higher pH values; therefore, SiO2 is expected to be a less effective sink for Pb immobilization than for these other metals.     

Comparative sorption and desorption of benzo[a]pyrene and 3,4,3',4'-tetrachlorobiphenyl in natural lake water containing dissolved organic matter

The sorption and desorption of two model compounds, benzo[a]pyrene (BaP) and 3,4,3',4'-tetrachlorobiphenyl (TCBP), were studied in natural lake water with high dissolved organic matter (DOM) content using the equilibrium dialysis and Tenax extraction methods. The sorption of TCBP was lower and reached steady value more slowly than did BaP. Tenax extraction revealed at least two differently desorbing fractions for both model compounds, which also supported the conclusion that DOM-HOC associations may involve several mechanisms. The rapidly desorbing fraction may be attributed to freely dissolved and loosely sorbed compound, whereas the more strongly sorbed fraction may indicate the presence of specific binding sites. The data indicated that the association between hydrophobic organic contaminants (HOC) and DOM is not simply absorption that is solely driven by the lipophilicity of the sorbates. Although contact time had a rather negligible effect on the sorption of BaP, the proportion of desorption resistant fraction increased with time, whereas the desorption of TCBP was less affected by contact time. Steric factors may be the cause of the lower sorption and smaller desorption resistant fraction of TCBP. The results indicate potential differences in the behavior of PAHs and PCBs in the aquatic environment.     

Additive and competitive effects of bacteria and Mn oxides on arsenite oxidation kinetics

Arsenic (As) is a redox-active metalloid whose toxicity and mobility in soil depend on oxidation state. Arsenite [As(III)] can be oxidized to arsenate [As(V)] by both minerals and microbes in soil however, the interaction between these abiotic and biotic processes is not well understood. In this study, the time dependency of As(III) oxidation by two heterotrophic soil bacteria (Agrobacterium tumefaciens and Pseudomonas fluorescens) and a poorly crystalline manganese (Mn) oxide mineral (δ-MnO(2)) was determined using batch experiments. The apparent rate of As(V) appearance in solution was greater for the combined batch experiments in which bacteria and δ-MnO(2) were oxidizing As(III) at the same time than for either component alone. The additive effect of the mixed cell- δ-MnO(2) system was consistent for short (<1 h) and long (24 h) term coincubation indicating that mineral surface inhibition by cells has little effect the As(III) oxidation rate. Surface interactions between cells and the mineral surface were indicated by sorption and pH-induced desorption results. Total sorption of As on the mineral was lower with bacteria present (16.1 ± 0.8% As sorbed) and higher with δ-MnO(2) alone (23.4 ± 1%) and As was more easily desorbed from the cell-δ-MnO(2) system than from δ-MnO(2) alone. Therefore, the presence of bacteria inhibited As sorption and decreased the stability of sorbed As on δ-MnO(2) even though As(III) was oxidized fastest in a mixed cell-δ-MnO(2) system. The additive effect of biotic (As-oxidizing bacteria) and abiotic (δ-MnO(2) mineral) oxidation processes in a system containing both oxidants suggests that mineral-only results may underestimate the oxidative capacity of natural systems with biotic and abiotic As(III) oxidation pathways.