Behaviors of Chemically Crosslinked CAAMPS Hydrogels in Uptake of Uranyl Ions from Aqueous Solutions

Uranyl ion adsorption from aqueous solutions has been investigated by chemically crosslinked (C) polyelectrolyte acrylamide/2-acrylamido-2-methyl-1-propanesulfonic acid (CAAMPS) hydrogels. CAAMPS hydrogels with various compositions were prepared from ternary mixtures of acrylamide (A), 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS), and water by free radical polymerization in an aqueous solution using multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and 1,4 butanediol dimethacrylate (BDMA). The swelling equilibrium of polyelectrolyte copolymer gels containing of CAAMPS hydrogels has been studied as a function of copolymer composition. Swelling experiments were performed in water at 25°C, gravimetrically. The influence of AMPS content in hydrogels was examined. The weight-swelling ratio of CAAMPS hydrogels was increased up to 127.03 (for 300 mg AMPS and crosslinked by EGDMA) and 93.32 (for 300 mg AMPS and crosslinked by BDMA), while acrylamide hydrogels swelled up to 10.27 (crosslinked by EGDMA) and 10.06 (crosslinked by BDMA). Uranyl ion adsorption from aqueous solutions was studied by batch sorption technique at 25°C. The effect of uranyl ion concentration and mass of AMPS on the uranyl ion adsorption were examined. In the experiments of the sorption, L type sorption in the Giles classification system was found. Finally, the amount of sorbed uranyl ion per gram of dry hydrogel (q) was calculated to be 0.67 × 10^?3–2.11 × 10^?3 mol uranyl ion per gram for CAAMPS hydrogels. Removal effiency of uranyl ions (RE%) was changed range 9.05–29.92%. The values of partition ratio, (K _d ) of uranyl ions was calculated to be 0.10–0.43 for CAAMPS hydrogels.     

Behaviors of Acrylamide/Itaconic Acid Hydrogels in Uptake of Uranyl Ions from Aqueous Solutions

Abstract

In this study, adsorptions of uranyl ions from two different aqueous uranyl solutions by acrylamide-itaconic acid hydrogels were investigated by a spectroscopic method. The hydrogels were prepared by irradiating with γ-radiation. In the experiment of uranyl ions adsorption, Type II adsorption was found. One gram of acrylamide-itaconic acid hydrogels sorbed 178–219 mg uranyl ions from the solutions of uranyl acetate, 42–76 mg uranyl ions from the aqueous solutions of uranyl nitrate, while acrylamide hydrogel did not sorb any uranyl ion. For the hydrogel containing 40 mg of itaconic acid and irradiated to 3.73 kGy, swelling of the hydrogels was observed in water (1660%), in the aqueous solution of uranyl acetate (730%), and in the aqueous solution of uranyl nitrate (580%). Diffusions of water onto hydrogels were a non-Fickian type of diffusion, whereas diffusions of uranyl ions were a Fickian type of diffusion.     

Poly(hydroxamic acid) hydrogels from poly(acrylamide): preparation and characterization

Summary Poly(hydroxamic acid) (PHA) hydrogels from crosslinked poly(acrylamide) (PAAm) hydrogels containing different type crosslinkers such as such as N, N'-methylene bisacrylamide (N) and ethyleneglycol dimethacrylate (E). The effect of crosslinkers on some physical properties was investigated. The structure of hydrogels was characterized spectroscopically and thermally. The swelling parameters of PHA in distilled water, such as percent equilibrium swelling (S_eq%), initial swelling rate (r_o), maximum equilibrium swelling (S_max), diffusional exponent (n), network parameter (k) and diffusion coefficient (D) were calculated. It has been found that the ionogenity of PHA and the structure of the used crosslinkers during the synthesis have been effective on the swelling behaviour of the hydrogels. Received: 12 February 2001 / Revised version: 30 June 2001 / Accepted: 11 July 2001     

Polyelectrolyte CASA hydrogels for uptake of uranyl ions from aqueous solutions

In this study, uranyl ion adsorption from aqueous solutions has been investigated by chemically crosslinked acrylamide/sodium acrylate (CASA) hydrogels. Adsorption studies were investigated by the spectroscopic method. CASA hydrogels with various compositions were prepared from ternary mixtures of acrylamide (A), sodium acrylate (SA), and water by free radical polymerization in aqueous solution, using multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA). Uranyl ion adsorption from aqueous solutions was studied by the batch sorption technique at 25°C. The effect of uranyl ion concentration and mass of adsorbent on the uranyl ion adsorption were examined. In experiments of sorption, L‐type sorption in the Giles classification system was found. Some binding parameters, such as initial binding constant (K_i), equilibrium constant (K), monolayer coverage (n), site‐size (u), and maximum fractional occupancy (Ô) for the CASA hydrogel–uranyl ion binding system, were calculated using the Langmuir linearization method. Finally, the amount of sorbed uranyl ion per gram of dry hydrogel (q) was calculated to be 4.44 × 10^?4–14.86 × 10^?4 mol uranyl ion per gram for CASA hydrogels. Adsorption of uranyl ion (percentage) was changed within a range of 12.86–46.71%. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 200–204, 2007     

Behaviors of polyelectrolyte AAm/AMPS/bentonite composite hydrogels in uptake of uranyl ions from aqueous solutions

Uranyl ion (UO₂²⁺) sorption properties of polyelectrolyte composite hydrogels made by the polymerization of acrylamide (AAm) with 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (AMPS) and clay such as bentonite (Bent) were investigated as a function of composition to find materials with swelling and uranyl ion sorption properties. Highly swollen AAm/AMPS hydrogels and AAm/AMPS/Bent composite hydrogels were prepared by free radical solution polymerization in aqueous solutions of AAm with AMPS as co‐monomer and two multifunctional crosslinkers such as ethylene glycol dimethacrylate (EGDMA) and 1,4 butanediol dimethacrylate (BDMA). Swelling experiments were performed in water at 25°C, gravimetrically. The influence of AMPS content in hydrogels was examined. Uranyl ion adsorption from aqueous solutions was studied by batch sorption technique at 25°C. The effect of uranyl ion concentration and mass of AMPS on the uranyl ion adsorption were examined. Finally, adsorption capacity (the amount of sorbed uranyl ion per gram of dry hydrogel) (q) was calculated to be 0.67 × 10⁻³–2.11 × 10⁻³ mol uranyl ion per gram for the hydrogels. Removal effiency of uranyl ions (RE%) was changed range 9.05–29.92%. The values of partition ratio (K_d) of uranyl ions was calculated to be 0.10–0.43 for AAm/AMPS hydrogels and AAm/AMPS/Bent composite hydrogels, respectively. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Uranyl ions uptake on poly(AAc/AAm)-cl-N,N-MBAAm hydrogel

In the present article, we report two well-characterized hydrogels for the adsorption of uranyl ions from 5% NaCl solution. The hydrogel was synthesized by free radical initiation from acrylamide and acrylic acid using N,N-methylenebisacrylamide as crosslinker. In order to improve ion uptake performance, the hydrogel was hydrolyzed to partially convert some of the amide groups into carboxylate groups. The uranyl ion adsorption was studied as a function of hydrogel structure, uranyl ions concentration, pH, temperature, and mass of hydrogel. The partially hydrolyzed hydrogel exhibited the maximum uranyl ion uptake of 236.6 mgg⁻¹ in 480 min at 45 °C and at pH 13. Good reproducibility of results was observed and the evidence of sorption at the optimum pH and ion concentration was obtained by comparison of FTIR spectra of the precursor and uranyl ions loaded hydrogels. The performance of both the hydrogels was found to be higher than that of a commercial resin, Amberlite IRC-718. The experimental data shows good match with Langmuir and Freundlich isotherms and pseudo-first order kinetics.     

Enhancement of uranyl ion uptake by prestructuring of acrylamide–maleic acid hydrogels

Acrylamide–maleic acid (AAm–MA) hydrogels were prepared by gamma‐irradiation of their aqueous solutions. UO₂⁺² ion uptake on P(AAm–MA) hydrogels was investigated using two types of gel systems prepared by a simple irradiation method and a prestructured reaction. It has been observed that gels prestructured with UO₂⁺² ions adsorbed approximately 15–20% more UO₂⁺² ions than gels prepared in pure water (the usual method). It was also found that the uranyl ion adsorption capacity of hydrogels increased with an increasing amount of maleic acid in the gel system and an increasing concentration of uranyl ion in the solution. A possible interaction mechanism between the groups in the copolymeric gels and UO₂⁺² ion has been proposed based on the stoichiometry and the spectroscopic evidence. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 284–289, 2000     

Adsorption of phenazine dyes using poly(hydroxamic acid) hydrogels from aqueous solutions

Swelling and adsorption properties of poly(hydroxamic acid), (PHA) hydrogels in aqueous solutions of some phenazine dyes such as Neutral Red, Safranin T, and Janus Green have been investigated. PHA hydrogels containing N,N′ methylenebisacrylamide or ethyleneglycoldimethacrylate were used in experiments on swelling, diffusion and adsorption of the dyes. The equilibrium swelling (S_eq) values of PHA hydrogels in aqueous solutions of the phenazine dyes were calculated as 2.16–33.25 g g^?1. Swelling kinetic parameters such as initial swelling rate, swelling rate constant, and maximum swelling were found. Dye diffusion into hydrogels was found to be non‐Fickian in character. Diffusion coefficients are ranged 1.32 × 10^?6 cm² s^?1 ? 44.70 × 10^?6 cm² s^?1. Adsorption of the phenazine dyes onto PHA hydrogels was studied by batch technique. PHA hydrogels in the phenazine dye solutions showed the dark coloration. The data was found that Freundlich isotherm model fits. According the Freundlich constants, the adsorption isotherms are of S‐type in Giles classification. All swelling and binding parameters for PHA‐EGDMA were found to be higher than those for PHA‐NNMBA. The type of crosslinker influenced the swelling, binding, and sorption more than the type of dye. Finally, it can be said that PHA hydrogels may be used a sorbent for removal of dyes. POLYM. ENG. SCI., 58:310–318, 2018. © 2017 Society of Plastics Engineers     

Studies on preparation and swelling properties of the N-isopropylacrylamide/chitosan semi-IPN and IPN hydrogels

Semi-interpenetrating network (semi-IPN) polymer gels and interpenetrating network (IPN) polymer gels with thermosensitivity were prepared by introducing a biodegradable polymer, chitosan, into the N-isopropyacrylamide (PNIPAAm) gel system. The swelling behavior, temperature sensitivity, pH sensitivity, gel strength, and drug-release behavior of PNIPAAm/chitosan semi-IPN and IPN hydrogels were investigated. The results indicated that the NIPAAm/chitosan semi-IPN and IPN hydrogels exhibited pH and temperature-sensitivity behavior and could slow drug release and diffusion from the gels. From the stress–strain curves of the hydrogels, the compression moduli of IPN gels containing crosslinked chitosan were higher than those of semi-IPN gels. This is because IPN gels have a more compact structure. The morphology of PNIPAAm/chitosan hydrogels was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2487–2496, 2001     

Radiation synthesis of poly(N‐vinylpyrrolidone‐co‐methacrylic acid) hydrogels and their usability in uranyl ion adsorption

In this study, N‐vinylpyrrolidone(VP)/methacrylic acid (MAA) mixtures have been prepared at three different mole percents which the methacrylic acid composition around 5, 10, and 15%. Poly(N‐vinylpyrrolidone‐co‐methacrylicacid) P(VP/MAA) hydrogels irradiated at 3.4 kGy have been used for swelling and diffusion studies in water and uranyl ion solutions. The influence of dose, pH, relative amounts of monomers in MAA/VP monomer mixtures on the swelling properties have been investigated. P(VP/MAA) hydrogels were swollen in distilled water at pH 7.0. P(VP/MAA)1 hydrogel containing 36% (mole percent) methacrylic acid showed the maximum percent swelling in water. Adsorption isotherms were constructed for uranyl ions and P(VP/MAA) hydrogel systems. It has been found that P(VP/MAA) hydrogels have very high uptake of the uranyl ions succesfully in water containing uranyl ions. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The effect of gel composition on the uranyl ions adsorption capacity of poly(N‐vinyl 2‐pyrrolidone‐g‐citric acid) hydrogels prepared by gamma rays

Poly(N‐vinyl 2‐pyrrolidone‐g‐citric acid) (PVP‐g‐CA) hydrogels with varying compositions were prepared from ternary mixtures of N‐vinyl 2‐pyrrolidone–citric acid–water by using ⁶⁰Co γ‐rays. The effect of gel composition on the uranyl ions adsorption capacity of PVP‐g‐CA hydrogels was investigated. Uranyl adsorption capacity of these hydrogels were found to be in the range of 18–144 mg [UO]/g dry gel from the aqueous solution of uranyl nitrate and 22–156 mg [UO]/g dry gel from the aqueous solution of uranyl acetate, depending on the content of citric acid in the hydrogel, while poly(N‐vinyl 2‐pyrrolidone) hydrogel did not sorb any uranyl ion. The swelling of PVP‐g‐CA hydrogel containing 2.7 mol % CA was observed in water (1620%), in uranyl acetate solution (1450%) and in uranyl nitrate solution (1360%), as compared to 700% swelling of pure PVP hydrogels. The diffusion coefficients were varied from 12.57 up to 4.04 • 10⁻⁸ m² s⁻¹. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1037–1043, 2000     

Separation of Uranyl Ions on Starch-Based Functional Hydrogels: Mechanism and Kinetics

In this article, we report the mechanism and kinetics of adsorption of uranyl ions on starch-based functional hydrogels. The hydrogels were prepared from starch in native or hydrolyzed/oxidized form by crosslinking with N,N-methylenebisacrylamide. The hydrogels synthesized from the oxidized starch have carboxylic groups at C-6 position. The effect of the structure and external environmental factors, i.e., contact time, temperature, ion strength, and simulated seawater (0.55 M NaCl and 3 mM NaHCO₃), was investigated on the uranyl adsorption behavior of hydrogels. The adsorption of uranyl ions was rapid as the highest adsorption was observed after 6 h and at 40°C. The sorbents also exhibited appreciable ion uptake even from the simulated seawater. The equilibrium data was analyzed using Langmuir and Freundlich adsorption isotherms and pseudo-first order and pseudo-second order kinetic models. Evidence of adsorption was obtained by characterization of the uranyl ions-loaded hydrogels by FTIR spectroscopy and also by elution with 0.1 N HCl.     

Functionally‐modified egg white albumen hydrogels

Hydrogels were prepared by using egg white albumen (EWA) before and after chemical modification of its lysyl residues with ethylenediamine tetraacetic dianhydride (EDTAD) to incorporate carboxylic groups. This resulted in an increase in swelling ratio of the EWA hydrogels. The swelling ratio increased dramatically in deionized water substantially, more than in pH 7.4 buffer solution. The effects of medium pH, temperature and swelling were investigated, along with crosslinking of the gel network by glutaraldehyde (GLA), as well as acetone treatment. The gels denatured by acetone showed an insignificant increase in swelling ratio for the gels crosslinked with GLA during gel preparation, which is in contrast to the gels crosslinked subsequent to gel formation. The swelling behavior was positively affected by temperature and time. However, an insignificant effect of pH was observed due to electrostatic screening of the carboxylic groups by sodium ions in the buffer solution. Availability of various functional groups on EWA has resulted in adsorption of metals (Cu⁺² ions) and non‐metals (PO₄^?2 anions). Copyright © 2004 Society of Chemical Industry     

Uranyl Ion Uptake from Aqueous Solutions by Chemically Cross-linked Polyelectrolyte CAMA Hydrogels

Uranyl ion adsorption from aqueous solutions has been investigated by chemically cross-linked polyelectrolyte acrylamide/maleic acid (CAMA) hydrogels. CAMA hydrogels with various compositions were prepared from ternary mixtures of acrylamide (A), maleic acid (MA), and water by free radical polymerization in aqueous solution using multifunctional cross-linkers such as ethylene glycol dimethacrylate (EGDMA) and 1,4-butanediol dimethacrylate (BDMA). Uranyl ion adsorption from aqueous solutions was studied by batch sorption technique at 25°C. The effect of uranyl ion concentration and mass of adsorbent on the uranyl ion adsorption were examined. In the experiments of the sorption, L type sorption in the Giles classification system was found. Some binding parameters such as initial binding constant (K _i ), equilibrium constant (K), monolayer coverage (n), site-size (u), and maximum fractional occupancy (Ô) for CAMA hydrogel-uranyl ion binding system were calculated by using Langmuir linearization method. Finally, the amount of sorbed uranyl ion per gram of dry hydrogel (q) was calculated to be 3.29 × 10^?4 ? 15.87 × 10^?4 mol uranyl ion per gram for CAMA hydrogels. Adsorption of uranyl ion was changed range 8.17–48.10%.     

Swelling Characterization of Polyelectrolyte Poly(Hydroxamic Acid) Hydrogels in Aqueous Thiazin Dye Solutions

In this study, swelling behavior of polyelectrolyte poly(hydroxamic acid) (PHA) hydrogels have been investigated in aqueous thiazin dye solutions. PHA hydrogels were prepared by free radical polymerizations of acrylamide with some cross-linkers such as N,N′ methylenebisacrylamide (NBisA) and ethylene glycol dimethacrylate (EGDMA); then they were used in experiments on swelling and diffusion of some water-soluble cationic dyes such as methylene blue (MB), thionin (T), and toluidin blue (TB). Swelling experiments were performed in water at 25°C, gravimetrically. The equilibrium swelling percent (S%) values of PHA hydrogels were calculated as 238–2705%. Some swelling kinetic parameters such as initial swelling rate, swelling rate constant, and maximum (theoretical) swelling percent were found. Diffusional behavior of dye solutions was investigated. Dye diffusion into hydrogels was found to be non-Fickian in character. Diffusion exponent (n) is over 0.50. For sorption of thiazin cationic dyes, MB, T, and TB to PHA hydrogels were studied by batch sorption technique at 25°C. PHA hydrogels in the dye solutions showed the dark coloration. In the experiments of the adsorption, S-type adsorption in the Giles classification system was found.     

Adsorptions of Some Heavy Metal Ions in Aqueous Solutions by Acrylamide/Maleic Acid Hydrogels

Abstract

In this study, acrylamide—maleic acid (AAm/MA) hydrogels in the form of rod have been prepared by γ-radiation. They have been used for adsorption of some heavy metal ions such as uranium, iron, and copper. For the hydrogel containing 40 mg of maleic acid and irradiated at 3.73 kGy, maximum and minimum swellings in the aqueous solutions of the heavy metal ions have been observed with water (1480%) and the aqueous solution of iron(III) nitrate (410%), respectively. Diffusions of water and heavy metal ions onto hydrogels have been found to be of the non-Fickian type of diffusion. In experiments of uranyl ions adsorption, Type II adsorption has been found. One gram of AAm/MA hydrogels sorbed 14–86 mg uranyl ions from solutions of uranyl acetate, 14–90 mg uranyl ions from solutions of uranyl nitrate, 16–39 mg iron ions from solutions of iron(IV) nitrate, and 28–81 mg copper ions from solutions of copper acetate, while acrylamide hydrogel did not sorb any heavy metals ions.     

Studies on preparation and properties of porous biodegradable poly(NIPAAm) hydrogels

A series of biodegradable porous hydrogels, based on thermosensitive N‐isopropylacrylamide (NIPAAm) and biodegradable crosslinker‐polycaprolactone diacrylate (PCLdA) that was synthesized from polycaprolactone diol with acryloyl chloride were prepared by photopolymerization at low temperature. The effect of the crosslinker content and gelation method on the swelling behaviors and physical properties for the poly(NIPAAm) hydrogels was investigated. Results showed that the swelling ratio of the gel in deionized water decreased with an increase of the content of polycaprolactone (PCL) segment in the poly(NIPAAm) hydrogels. The properties of the gels crosslinked with PCLdA were compared with those crosslinked with N, N′‐methylenebisacrylamide (NMBA). The results showed that the critical gel transition temperatures (CGTT) of the gels crosslinked with PCLdA were lower than those of the gels crosslinked with NMBA due to the hydrophobicity of the PCL segment. The results also showed that the gels crosslinked with PCLdA had higher mechanical strength and crosslinking density than those gels crosslinked with NMBA. Comparing the porous gels with nonporous gels, the results showed that the swelling ratio and CGTT of the porous gels were higher than those of the nonporous gels, and the transition temperature curve was smoother for the porous gels. The porous gels also exhibited more rapid thermal response and faster degradation rates. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study in the uranyl ions uptake on acrylic acid and acrylamide copolymeric hydrogels

A series of copolymeric hydrogels comprising of acrylic acid and acrylamide and crosslinked with trimethylolpropane triacrylate (TMPTA) were prepared using ammonium persulfate (APS) as initiator. The hydrogels were functionalized further by partial hydrolysis and were characterized by SEM, FTIR, nitrogen analysis, and also by water uptake studies as a function of time, temperature, pH, NaCl, and concentration of sodium dodecyl sulfate (SDS). These hydrogels were used as sorbents for the uranyl ions uptake in the presence of 5% NaCl, which was studied as function of time, temperature, pH, and ion strength. The uranyl uptake was found to be affected both by the structural aspects of the hydrogels as well as by the external environmental factors. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid based hydrogels: Synthesis,characterization and their application in the removal of heavy metals

In this work, the synthesis of N-vinylpyrrolidone/acrylic acid/2-acrylamido-2-methylpropane sulfonic acid (NVP/AAc/AMPS) based hydrogels by UV-curing technique was studied and their swelling behavior, heavy metal ion recovery capabilities were investigated. The structures of hydrogels were characterized by FT-IR analysis and the results were consistent with the expected structures. Thermal gravimetric analysis of hydrogels showed that the thermal stability of hydrogel decreases slightly with incorporation of AMPS units into the structure. In addition, the morphology of the dry hydrogel sample was examined by SEM. According to swelling experiments, hydrogels with higher AMPS content gave relatively higher swelling ratio compared to neat hydrogel. These hydrogels were used for the separation of Cd(II), Cu(II) and Fe(III) ions from their aqueous solutions. The influence of the uptake conditions such as pH, time and initial feed concentration on the metal ion binding capacity of hydrogel was also tested. The selectivity of the hydrogel towards the different metal ions tested was Cd(II) > Cu(II) > Fe(III). It was observed that the specific interaction between metal ions and ionic co-monomers in the hydrogel affected the metal binding capacity of the hydrogel. The recovery of metal ions was also investigated in acid media.     

Enhanced adsorption of heavy metal ions onto simultaneous interpenetrating polymer network hydrogels synthesized by UV irradiation

Simultaneous interpenetrating polymer network (IPN) hydrogels have been prepared by UV-initiated polymerization of a mixture of 2-acrylamido-2-methyl-1-propansulfonic acid (AMPS) and triethylene glycol divinyl ether (DVE-3) with enhanced adsorption properties for heavy metal ion removal. The swelling ratio of the IPN hydrogels determined by gravimetric method increased with the AMPS content in the formulation. The IPN hydrogels were used to remove heavy metal ions from aqueous solution. The effects of pH value of the feed solution and AMPS content in the formulation on the adsorption capacity were investigated. The results indicated that the adsorption capacity increased with the pH values and AMPS content in the formulation. Furthermore, the synergistic complexation of metal ions with two polymer networks in the IPN was found in the adsorption studies. The adsorption isotherm of the IPN hydrogels can be well fitted to the Freundlich model. The adsorption kinetics on IPN hydrogels clearly followed an initial transport-controlled adsorption process, but transited to an attachment-controlled adsorption kinetics in the later stage. Thermodynamic parameters such as the Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) for the adsorption were estimated. Results suggested that the adsorption process was a spontaneous, exothermic process that had positive entropy.