A survey on position-based routing in mobile ad hoc networks

We present an overview of ad hoc routing protocols that make forwarding decisions based on the geographical position of a packet's destination. Other than the destination's position, each node need know only its own position and the position of its one-hop neighbors in order to forward packets. Since it is not necessary to maintain explicit routes, position-based routing does scale well even if the network is highly dynamic. This is a major advantage in a mobile ad hoc network where the topology may change frequently. The main prerequisite for position-based routing is that a sender can obtain the current position of the destination. Therefore, previously proposed location services are discussed in addition to position-based packet forwarding strategies. We provide a qualitative comparison of the approaches in both areas and investigate opportunities for future research     

移动Ad Hoc网络安全按需路由协议

Ad Hoc网络的安全性问题越来越引起人们的关注,如何确保Ad Hoc网络路由协议的安全成为Ad Hoc研究的一项关键技术。提出一种适用于移动Ad Hoc网络的安全按需源路由协议,利用移动节点之间的会话密钥和基于散列函数的消息鉴别码HMAC一起来验证路由发现和路由应答的有效性。提出的邻居节点维护机制通过把MAC地址和每个节点的ID绑定来防御各种复杂的攻击如虫洞攻击。NS-2仿真表明该协议能有效地探测和阻止针对Ad Hoc网络的大部分攻击。     

Stability-Based RREQ Forwarding Game for Stability-Oriented Route Discovery in MANETs

In traditional stability-oriented route discovery of mobile ad hoc networks, in-between nodes need to rebroadcast identical route request (RREQ) packets, which contain same source node ID and broadcast sequence number, to discover more stable route, yet it increases routing overhead and data transmission delay obviously. Therefore, a stability-oriented route discovery algorithm is proposed to limit routing overhead and decrease transmission delay. In this algorithm, all neighbor nodes of some node will play a mix strategy game named stability-based RREQ forwarding game after receiving an identical RREQ, and independently determine the RREQ forwarding probability based on Nash equilibrium, respectively. The simulation results show that the proposed stability-oriented route discovery algorithm not only reduces routing overhead and transmission delay effectively, but also improve other routing performance.     

RBR: a region-based routing protocol for mobile nodes in hybrid ad hoc networks

In hybrid ad hoc networks, mobile nodes can communicate not only with each other in a self-organizing manner, but also with nodes on wired networks for extensive information retrieval and dissemination. In this article we consider efficient routing operations between any two nodes in an ad hoc network that is linked to wired networks by an access point. To build routes with low routing overhead efficiently, we develop a new routing scheme of region-based routing (RBR), which utilizes hop counts between mobile nodes and the access point to localize a route discovery within a limited topological region. Limiting the region of route discovery results in fewer routing messages and therefore reduces routing overhead. Simulation results show that the RBR scheme greatly reduces routing overhead while preserving a high rate of success for route discovery to the destination     

一种安全的Ad Hoc On-demand路由协议

由于Ad Hoc网络固有的弱点,设计安全、有效的Ad Hoc路由协议是困难的.本文从新的角度设计了一个简单、安全的On-demand路由协议.在路径请求和响应阶段,源节点和目的节点的身份分别被隐藏,只有那些位于目的节点选择的最优路径上的节点可以获得完整的路由信息,从而产生有效的前向和反向路径.同时,一个公开的单向Hash函数可以利用隐藏的路由信息构建单向Hash链用于路由信息的认证,从而不需要预先的共享密钥.在一次路由计算中,只有源节点和目的节点需要进行一次非对称密码运算.     

Probabilistic analysis of routes on mobile ad hoc networks

The ad hoc network is comprised of mobile nodes without wires or any infrastructures. All data are transmitted from source node to destination node through wireless channels. The ad hoc network is self-organized by ad hoc network routing protocols. Due to the mobility of nodes, the route which is constructed from many proposed ad hoc network routing protocols and comprised of several direct node-to-node links exists only for a certain period. That also means the route is subject to frequent breakages. In this letter, the probabilistic behavior of a constructed route is investigated through simulation and curve fitting. The simulation results show that the probability density function of a route is exponential distribution. The simulation also shows how the time proportion is distributed among different route lengths under a certain scenario. The route is a basic factor in the ad hoc network which operates without any central controller. The characteristics of the route have much influence on the performance of the ad hoc network. Thus the probabilistic analysis provides important implications when we are designing ad hoc network routing protocols and deploying ad hoc networks.     

A new link lifetime estimation method for greedy and contention-based routing in mobile ad hoc networks

Greedy and contention-based forwarding schemes were proposed for mobile ad hoc networks (MANETs) to perform data routing hop-by-hop, without prior discovery of the end-to-end route to the destination. Accordingly, the neighboring node that satisfies specific criteria is selected as the next forwarder of the packet. Both schemes require the nodes participating in the selection process to be within the area that confronts the location of the destination. Therefore, the lifetime of links for such schemes is not only dependent on the transmission range, but also on the location parameters (position, speed and direction) of the sending node and the neighboring node as well as the destination. In this paper, we propose a new link lifetime prediction method for greedy and contention-based routing which can also be utilized as a new stability metric. The evaluation of the proposed method is conducted by the use of stability-based greedy routing algorithm, which selects the next hop node having the highest link stability.     

Optimised relay selection for route discovery in reactive routing

On-demand routing protocols have the potential to provide scalable information delivery in large ad hoc networks. The novelty of these protocols is in their approach to route discovery, where a route is determined only when it is required by initiating a route discovery procedure. Much of the research in this area has focused on reducing the route discovery overhead when prior knowledge of the destination is available at the source or by routing through stable links. Hence, many of the protocols proposed to date still resort to flooding the network when prior knowledge about the destination is un-available. This paper proposes a novel routing protocol for ad hoc networks, called On-demand Tree-based Routing Protocol (OTRP). This protocol combines the idea of hop-by-hop routing (as used by AODV) with an efficient route discovery algorithm called Tree-based Optimised Flooding (TOF) to improve scalability of ad hoc networks when there is no prior knowledge about the destination. To achieve this in OTRP, route discovery overheads are minimised by selectively flooding the network through a limited set of nodes, referred to as branching nodes. The key factors governing the performance of OTRP are theoretically analysed and evaluated, including the number of branch nodes, location of branching nodes and number of Route REQuest (RREQ) retries. It was found that the performance of OTRP (evaluated using a variety of well-known metrics) improves as the number of branching nodes increases and the number of consumed RREQ retries is reduced. Additionally, theoretical analysis and simulation results shows that OTRP outperforms AODV, DYMO, and OLSR with reduced overheads as the number of nodes and traffic load increases.     

A Novel Robust Routing Scheme Against Rushing Attacks in Wireless Ad Hoc Networks

Standard on-demand routing protocols in wireless ad hoc networks were not originally designed to deal with security threats. Because of that, malicious users have been finding ways to attack networks. Rushing attacks represent one of such possibilities. In these attacks, malicious nodes forward the Route Request (RREQ) packets, asking for a route, to the destination node quicker than the legitimate nodes do. This is possible because the legitimate nodes only forward the first received RREQ packet for a given route discovery. Besides, the attackers can tamper with either the Medium Access Control or routing protocols to get faster processing. As a result, the path through the malicious nodes is chosen, which renders throughput degradation. We propose here a novel, robust routing scheme to defend ad hoc networks against rushing attacks. Our scheme utilizes the “neighbor map mechanism” to establish robust paths as far as rushing attacks are concerned. The proposed scheme also improves path recovery delay by using, whenever it is possible, route maintenance rather than route discovery. Yet, it is energy efficient. The simulation results show that our proposal is indeed viable.     

A peer-to-peer zone-based two-level link state routing for mobilead hoc networks

A new global positioning system (GPS)-based routing protocol for ad hoc networks, called zone-based hierarchical link state (ZHLS) routing protocol, is proposed. In this protocol, the network is divided into nonoverlapping zones. Each node only knows the node connectivity within its zone and the zone connectivity of the whole network. The link state routing is performed on two levels: focal node and global zone levels. Unlike other hierarchical protocols, there is no cluster head in this protocol. The zone level topological information is distributed to all nodes. This “peer-to-peer” manner mitigates traffic bottleneck, avoids single point of failure, and simplifies mobility management. Since only zone ID and node ID of a destination are needed for routing, the route from a source to a destination is adaptable to changing topology. The zone ID of the destination is found by sending one location request to every zone. Simulation results show that our location search scheme generates less overhead than the schemes based on flooding. The results also confirm that the communication overhead for creating and maintaining the topology in the proposed protocol is smaller than that in the flat LSR protocol. This new routing protocol provides a flexible, efficient, and effective approach to accommodate the changing topology in a wireless network environment     

A Power-Aware Multicast Routing Protocol for Mobile Ad Hoc Networks With Mobility Prediction

A mobile ad hoc network (MANET) is a dynamically reconfigurable wireless network that does not have a fixed infrastructure. Due to the high mobility of nodes, the network topology of MANETs changes very fast, making it more difficult to find the routes that message packets use. Because mobile nodes have limited battery power, it is therefore very important to use energy in a MANET efficiently. In this paper, we propose a power-aware multicast routing protocol (PMRP) with mobility prediction for MANETs. In order to select a subset of paths that provide increased stability and reliability of routes, in routing discovery, each node receives the RREQ packet and uses the power-aware metric to get in advance the power consumption of transmitted data packets. If the node has enough remaining power to transmit data packets, it uses the global positioning system (GPS) to get the location information (i.e., position, velocity and direction) of the mobile nodes and utilizes this information to calculate the link expiration time (LET) between two connected mobile nodes. During route discovery, each destination node selects the routing path with the smallest LET and uses this smallest link expiration time as the route expiration time (RET). Each destination node collects several feasible routes and then selects the path with the longest RET value as the primary routing path. Then the source node uses these routes between the source node and each destination node to create a multicast tree. In the multicast tree, the source node will be the root node and the destination nodes will be the leaf nodes. Simulation results show that the proposed PMRP outperforms MAODV (Royer, E. M. & Perkins, C. E. (1999). In Proceedings of the ACM MOBICOM, pp. 207–218, August 1999.) and RMAODV (Baolin, S. & Layuan, L. (2005). In Proceeding of the 2005 IEEE International symposium on microwave antenna, propagation and EMC technologies for wireless communications, Vol. 2, pp. 1514–1517, August 2005.).     

On-demand loop-free routing with link vectors

We present the on-demand link vector (OLIVE) protocol, a routing protocol for ad hoc networks based on link-state information that is free of routing loops and supports destination-based packet forwarding. Routers exchange routing information reactively for each destination in the form of complete paths, and each node creates a labeled source graph based on the paths advertised by its neighbors. A node originates a broadcast route request (RREQ) to obtain a route for a destination for which a complete path does not exist in its source graph. When the original path breaks, a node can select an alternative path based on information reported by neighbors, and a node can send a unicast RREQ to verify that the route is still active. A node that cannot find any alternate path to a destination sends route errors reliably to those neighbors that were using it as next hop to the destination. Using simulation experiments in ns2, OLIVE is shown to outperform dynamic source routing, ad hoc on-demand distance vector, optimized link-state routing protocol, and topology broadcast based on reverse-path forwarding, in terms of control overhead, throughput, and average network delay, while maintaining loop-free routing with no need for source routes.     

A location prediction based routing protocol and its extensions for multicast and multi-path routing in mobile ad hoc networks

This paper discusses a new location prediction based routing (LPBR) protocol for mobile ad hoc networks (MANETs) and its extensions for multicast and multi-path routing. The objective of the LPBR protocol is to simultaneously minimize the number of flooding-based route discoveries as well as the hop count of the paths for a source–destination (s–d) session. During a regular flooding-based route discovery, LPBR collects the location and mobility information of nodes in the network and stores the collected information at the destination node of the route search process. When the minimum-hop route discovered through flooding fails, the destination node locally predicts a global topology based on the location and mobility information collected during the latest flooding-based route discovery and runs a minimum-hop path algorithm. If the predicted minimum-hop route exists in reality, no expensive flooding-based route discovery is needed and the source continues to send data packets on the discovered route. Similarly, we propose multicast extensions of LPBR (referred to as NR-MLPBR and R-MLPBR) to simultaneously reduce the number of tree discoveries and the hop count per path from the source to each multicast group receiver. Nodes running NR-MLPBR are not aware of the receivers of the multicast group. R-MLPBR assumes that each receiver node also knows the identity of the other receiver nodes of the multicast group. Finally, we also propose a node-disjoint multi-path extension of LPBR (referred to as LPBR-M) to simultaneously minimize the number of multi-path route discoveries as well as the hop count of the paths.     

Ad hoc网络中基于数据流的QoS路由协议

已有ad hoc网络中的QoS路由都是基于目的地址的选路并预留资源,当源节点针对同一个目的节点先后建立两个或者多个实时业务流的时候,将导致几个数据流争用资源,使得几个流的QoS都无法得到保证。针对这个问题,文章提出了基于流的QoS路由机制,并且进行了仿真分析,仿真结果表明这种机制能够解决这个问题,使QoS得到保证。     

Integrated Routing and Storage for Messaging Applications in Mobile Ad Hoc Networks

This paper is motivated by the observation that traditional ad hoc routing protocols are not an adequate solution for messaging applications (e.g., e-mail) in mobile ad hoc networks. Routing in ad hoc mobile networks is challenging mainly because of node mobility – the more rapid the rate of movement, the greater the fraction of bad routes and undelivered messages. For applications that can tolerate delays beyond conventional forwarding delays, we advocate a relay-based approach to be used in conjunction with traditional ad hoc routing protocols. This approach takes advantage of node mobility to disseminate messages to mobile nodes. The result is the Mobile Relay Protocol (MRP), which integrates message routing and storage in the network; the basic idea is that if a route to a destination is unavailable, a node performs a controlled local broadcast (a relay) to its immediate neighbors. In a network with sufficient mobility – precisely the situation when conventional routes are likely to be non-existent or broken – it is quite likely that one of the relay nodes to which the packet has been relayed will encounter a node that has a valid, short (conventional) route to the eventual destination, thereby increasing the likelihood that the message will be successfully delivered. Our simulation results under a variety of node movement models demonstrate that this idea can work well for applications that prefer reliability over latency.     

Interference Aware Route Discovery in Wireless Mobile Ad Hoc Networks

In this paper, we propose an interference aware expanding region search algorithm to locate a destination in mobile ad hoc networks. In the proposed approach, signal to interference plus noise ration (SINR) is used in place of TTL field of a route request packet. The source node initializes the search query with a threshold value of SINR. Each relay node forwards the packet if its SINR satisfies the threshold criteria provided by the source node in RREQ packet. As a result, the low SINR nodes are removed in route discovery phase prior to the establishment of routes. The simulation results show that proposed algorithm provides significant improvement in performance of reactive routing protocol in terms of reduced routing overhead, reduced energy consumption, and increased network throughput.

     

Location management in mobile ad hoc wireless networks using quorums and clusters

Position‐based reactive routing is a scalable solution for routing in mobile ad hoc networks. The route discovery algorithm in position‐based routing can be efficiently implemented only if the source knows the current address of the destination. In this paper, a quorum‐based location management scheme is proposed. Location servers are selected using the minimum dominating set (MDS) approach, and are further organized into quorums for location update and location query. When a mobile node moves, it updates its location servers in the update quorum; when a node requests the location information of another node, it will send a query message to the location servers in the query quorum. We propose to use the position‐based quorum system, which is easy to construct and guarantees that the update quorums always intersect with the query quorums so that at least one location server in the query quorum is aware of the most recent location of the mobile node. Clusters are introduced for large scale ad hoc networks for scalability. Experiment results show that the proposed scheme provides good scalability when network size increases. Copyright © 2005 John Wiley & Sons, Ltd.     

ARMR: Anonymous routing protocol with multiple routes for communications in mobile ad hoc networks

A mobile ad hoc network consists of mobile nodes that communicate in an open wireless medium. Adversaries can launch analysis against the routing information embedded in the routing message and data packets to detect the traffic pattern of the communications, thereby obtaining sensitive information of the system, such as the identity of a critical node. In order to thwart such attacks, anonymous routing protocols are developed. For the purposes of security and robustness, an ideal anonymous routing protocol should hide the identities of the nodes in the route, in particular, those of the source and the destination. Multiple routes should be established to increase the difficulty of traffic analysis and to avoid broken paths due to node mobility. Existing schemes either make the unrealistic and undesired assumption that certain topological information about the network is known to the nodes, or cannot achieve all the properties described in the above. In this paper, we propose an anonymous routing protocol with multiple routes called ARMR, which can satisfy all the required properties. In addition, the protocol has the flexibility of creating fake routes to confuse the adversaries, thus increasing the level of anonymity. In terms of communication efficiency, extensive simulation is carried out. Compared with AODV and MASK, our ARMR protocol gives a higher route request success rate under all situations and the delay of our protocol is comparable to the best of these two protocols.     

Adding sense of spatial locality to routing protocols for mobile ad hoc networks

Recently, there has been an increasing interest in mobile ad hoc networks. In a mobile ad hoc network, each mobile node can freely move around and the network is dynamically constructed by collections of mobile nodes without using any existing network infrastructure. Compared to static networks, it faces many problems such as the inefficiency of routing algorithms. Also, the number of control packets in any routing algorithm increases as the mobile speed or the number of mobile nodes increases. Most of the current routing protocols in ad hoc networks broadcast the control packets to the entire network. Therefore, by reducing the number of control packets, the efficiency of the network routing will be improved. If we know where the destination is, we can beam our search toward that direction. However, without using global positioning systems, how can we do this? Define the range nodes as the 1‐hop or 2‐hop neighbors of the destination node. In this paper, we propose using the range nodes to direct our searches for the destination. It can be combined with the existing routing protocols to reduce the control overhead. We show through simulations that AODV and DSR combined with the range node method outperforms the original AODV and DSR routing protocols in terms of control packets overhead. We also show that the delay introduced in find range nodes is insignificant. Copyright © 2006 John Wiley & Sons, Ltd.     

A routing framework for providing robustness to node failures in mobile ad hoc networks

Nodes in a mobile ad hoc network are often vulnerable to failures. The failures could be either due to fading effects, battery drainage, or as a result of compromised nodes that do not participate in network operations. Intermittent node failures can disrupt routing functionalities. As such, it is important to provide redundancy in terms of providing multiple node-disjoint paths from a source to a destination. In line with this objective, we first propose a modified version of the widely studied ad hoc on-demand distance vector routing protocol to facilitate the discovery of multiple node-disjoint paths from a source to a destination. We find that very few of such paths can be found. Furthermore, as distances between sources and destinations increase, bottlenecks inevitably occur and thus, the possibility of finding multiple paths is considerably reduced. We conclude that it is necessary to place what we call reliable nodes (in terms of both being robust to failure and being secure) in the network to support efficient routing operations. We propose a deployment strategy that determines the positions and the trajectories of these reliable nodes such that we can achieve a framework for reliably routing information. We define a notion of a reliable path which is made up of multiple segments, each of which either entirely consists of reliable nodes, or contains a preset number of multiple paths between the end points of the segment. We show that the probability of establishing a reliable path between a random source and destination pair increases tremendously even with a small number of reliable nodes when we use our algorithm to appropriately position these reliable nodes.