Low-frequency noise in ambipolar carbon nanotube transistors

Low-frequency noise measurements on individual single-walled carbon nanotube transistors exhibiting ambipolar characteristics have been carried out. With a polymer electrolyte as gate medium, low-frequency noise can be monitored in both p- and n-channel operation of the same nanotube under the same chemical environment. 1/ f noise in the p-channel of polymer electrolyte gated nanotube transistor is similar to that of back gate operation. However, most devices exhibit significantly larger noise amplitude in the n-channel operation that has a distinct dependence on the threshold voltage. A nonuniform energy distribution of carrier trapping/scattering sites is considered to explain these observations.     

Noise characteristics of single-walled carbon nanotube network transistors

The noise characteristics of randomly networked single-walled carbon nanotubes grown directly by plasma enhanced chemical vapor deposition (PECVD) are studied with field effect transistors (FETs). Due to the geometrical complexity of nanotube networks in the channel area and the large number of tube-tube/tube-metal junctions, the inverse frequency, 1/f, dependence of the noise shows a similar level to that of a single single-walled carbon nanotube transistor. Detailed analysis is performed with the parameters of number of mobile carriers and mobility in the different environment. This shows that the change in the number of mobile carriers resulting in the mobility change due to adsorption and desorption of gas molecules (mostly oxygen molecules) to the tube surface is a key factor in the 1/f noise level for carbon nanotube network transistors.     

The geometrical effect of single walled carbon nanotube network transistors on low frequency noise characteristics

The noise characteristics of randomly networked single walled carbon nanotubes grown directly by plasma enhanced chemical vapor deposition with field effect transistor. Geometrical complexity due to the large number of tube-tube junctions in the nanotube network is expected to be one of the key factors for the noise power of 1/f dependence. We investigated low frequency noise as a function of channel length (2-10 microm) and found that increased with longer channel length. Percolational behaviors of nanotube network that differs from ordinary semiconducting and metallic materials can be characterized by a geometrical picture with electrical homo- and hetero-junctions. Fixed nanotube density provides a test conditions to evaluate the contributions of junctions as a noise center. Hooge's empirical law is applied to investigate the low frequency noise characteristics of single walled carbon nanotube random network transistors. The noise power shows the dependence of the transistor channel length. It is understood that nanotube/nanotube junctions act as a noise center. However, the differences induced by channel length in the noise power are observed as not so significant. We conclude that tolerance of low frequency noise is important property for SWNT networks as an electronic device application.     

Random-telegraph-signal noise and device variability in ballistic nanotube transistors

In field-effect transistors (FETs), charge trapping in the gate oxide is known to cause low-frequency noise and threshold shifts. Here we calculate the effect of single trapped charges in a carbon nanotube FET, using the nonequilibrium Greens function method in a tight-binding approximation. We find that a single charge can shift and even rescale the entire transfer characteristic of the device. This can explain both the large "random telegraph signal" noise and the large variations between nominally identical devices. We examine the dependence on both the thickness and dielectric constant of the gate dielectric, suggesting routes to reduce electrical noise.     

Charge noise in liquid-gated single-wall carbon nanotube transistors

The noise properties of single-walled carbon nanotube transistors (SWNT-FETs) are essential for the performance of electronic circuits and sensors. Here, we investigate the mechanism responsible for the low-frequency noise in liquid-gated SWNT-FETs and its scaling with the length of the nanotube channel down to the nanometer scale. We show that the gate dependence of the noise amplitude provides strong evidence for a recently proposed charge-noise model. We find that the power of the charge noise scales as the inverse of the channel length of the SWNT-FET. Our measurements also show that surprisingly the ionic strength of the surrounding electrolyte has a minimal effect on the noise magnitude in SWNT-FETs.     

Length scaling of carbon nanotube transistors

Carbon nanotube field-effect transistors are strong candidates in replacing or supplementing silicon technology. Although theoretical studies have projected that nanotube transistors will perform well at nanoscale device dimensions, most experimental studies have been carried out on devices that are about ten times larger than current silicon transistors. Here, we show that nanotube transistors maintain their performance as their channel length is scaled from 3 μm to 15 nm, with an absence of so-called short-channel effects. The 15-nm device has the shortest channel length and highest room-temperature conductance (0.7G?) and transconductance (40 μS) of any nanotube transistor reported to date. We also show the first experimental evidence that nanotube device performance depends significantly on contact length, in contrast to some previous reports. Data for both channel and contact length scaling were gathered by constructing multiple devices on a single carbon nanotube. Finally, we demonstrate the performance of a nanotube transistor with channel and contact lengths of 20 nm, an on-current of 10 μA, an on/off current ratio of 1 x 10?, and peak transconductance of 20 μS. These results provide an experimental forecast for carbon nanotube device performance at dimensions suitable for future transistor technology nodes.     

DNA-decorated carbon nanotubes for chemical sensing

We demonstrate a new, versatile class of nanoscale chemical sensors based on single-stranded DNA (ss-DNA) as the chemical recognition site and single-walled carbon nanotube field effect transistors (swCN-FETs) as the electronic read-out component. swCN-FETs with a nanoscale coating of ss-DNA respond to gas odors that do not cause a detectable conductivity change in bare devices. Responses of ss-DNA/swCN-FETs differ in sign and magnitude for different gases and can be tuned by choosing the base sequence of the ss-DNA. ss-DNA/swCN-FET sensors detect a variety of odors, with rapid response and recovery times on the scale of seconds. The sensor surface is self-regenerating: samples maintain a constant response with no need for sensor refreshing through at least 50 gas exposure cycles. This remarkable set of attributes makes sensors based on ss-DNA decorated nanotubes very promising for "electronic nose" and "electronic tongue" applications ranging from homeland security to disease diagnosis.     

DNA-linker-induced surface assembly of ultra dense parallel single walled carbon nanotube arrays

Ultrathin film preparations of single-walled carbon nanotube (SWNT) allow economical utilization of nanotube properties in electronics applications. Recent advances have enabled production of micrometer scale SWNT transistors and sensors but scaling these devices down to the nanoscale, and improving the coupling of SWNTs to other nanoscale components, may require techniques that can generate a greater degree of nanoscale geometric order than has thus far been achieved. Here, we introduce linker-induced surface assembly, a new technique that uses small structured DNA linkers to assemble solution dispersed nanotubes into parallel arrays on charged surfaces. Parts of our linkers act as spacers to precisely control the internanotube separation distance down to <3 nm and can serve as scaffolds to position components such as proteins between adjacent parallel nanotubes. The resulting arrays can then be stamped onto other substrates. Our results demonstrate a new paradigm for the self-assembly of anisotropic colloidal nanomaterials into ordered structures and provide a potentially simple, low cost, and scalable route for preparation of exquisitely structured parallel SWNT films with applications in high-performance nanoscale switches, sensors, and meta-materials.     

Probing electrostatic potentials in solution with carbon nanotube transistors

We have used single-walled carbon nanotube transistors to measure changes in the chemical potential of a solution due to redox-active transition-metal complexes. The interaction of the molecules with a gold electrolyte-gate wire changes the electrostatic potential sensed by the nanotube, which in turn shifts the gate-voltage dependence of the nanotube conductance. As predicted by the Nernst equation, this shift depends logarithmically on the ratio of oxidized to reduced molecules.     

A molybdenum disulfide/carbon nanotube heterogeneous complementary inverter

We report a simple, bottom-up/top-down approach for integrating drastically different nanoscale building blocks to form a heterogeneous complementary inverter circuit based on layered molybdenum disulfide and carbon nanotube (CNT) bundles. The fabricated CNT/MoS(2) inverter is composed of n-type molybdenum disulfide (MOS(2)) and p-type CNT transistors, with a high voltage gain of 1.3. The CNT channels are fabricated using directed assembly while the layered molybdenum disulfide channels are fabricated by mechanical exfoliation. This bottom-up fabrication approach for integrating various nanoscale elements with unique characteristics provides an alternative cost-effective methodology to complementary metal-oxide-semiconductors, laying the foundation for the realization of high performance logic circuits.     

Radio frequency transistors based on ultra-high purity semiconducting carbon nanotubes with superior extrinsic maximum oscillation frequency

In this paper, we report polyfluorene-separated ultra-high purity semiconducting carbon nanotube radio frequency transistors with a self-aligned T-shape gate structure. Because of the ultra-high semiconducting tube purity and self-aligned T-shape gate structure, these transistors showed an excellent direct current and radio frequency performance. In regard to the direct current characteristics, these transistors showed a transconductance up to 40 μS/μm and an excellent current saturation behavior with an output resistance greater than 200 kΩ·μm. In terms of the radio frequency characteristics, an extrinsic maximum oscillation frequency (f _max) of 19 GHz was achieved, which is a record among all kinds of carbon nanotube transistors, and an extrinsic current gain cut-off frequency (f _T) of 22 GHz was achieved, which is the highest among transistors based on carbon nanotube networks. Our results take the radio frequency performance of carbon nanotube transistors to a new level and can further accelerate the application of carbon nanotubes for future radio frequency electronics.

Open image in new window

     

Gate voltage dependent characteristics of p-n diodes and bipolar transistors based on multiwall CN(x)/carbon nanotube intramolecular junctions

The electrical transport characteristics of multiwall CN(x)/carbon nanotube intramolecular junctions were studied. The junctions could be used as diodes. We found that the rectification resulted from p-n junctions, not from metal-semiconductor junctions. The gate effect was very weak when the diodes were reverse biased. At forward bias, however, some of the p-n diodes could be n-type transistors. Experimental results supported the opinion that the gate voltage dependent property is derived from the Schottky barrier between the CN(x) part and the electrode. Using p-n diodes, a bipolar transistor with nanoscale components was built, whose behavior was very similar to that of a conventional planar bipolar transistor.     

Energy dissipation and transport in nanoscale devices

Understanding energy dissipation and transport in nanoscale structures is of great importance for the design of energy-efficient circuits and energy-conversion systems. This is also a rich domain for fundamental discoveries at the intersection of electron, lattice (phonon), and optical (photon) interactions. This review presents recent progress in understanding and manipulation of energy dissipation and transport in nanoscale solid-state structures. First, the landscape of power usage from nanoscale transistors (∼10⁻⁸ W) to massive data centers (∼10⁹ W) is surveyed. Then, focus is given to energy dissipation in nanoscale circuits, silicon transistors, carbon nanostructures, and semiconductor nanowires. Concepts of steady-state and transient thermal transport are also reviewed in the context of nanoscale devices with sub-nanosecond switching times. Finally, recent directions regarding energy transport are reviewed, including electrical and thermal conductivity of nanostructures, thermal rectification, and the role of ubiquitous material interfaces.      

Reigniting innovation in the transistor

Today the transistor is integral to the electronic circuitry that wires our lives. When Bardeen and Brattain first observed an amplified signal by connecting electrodes to a germanium crystal they saw that their 'semiconductor triode' could prove a useful alternative to the more cumbersome vacuum tubes used at the time [1]. But it was perhaps William Schottky who recognized the extent of the transistor's potential. A basic transistor has three or more terminals and current across one pair of terminals can switch or amplify current through another pair. Bardeen, Brattain and Schottky were jointly awarded a Nobel Prize in 1956 'for their researches on semiconductors and their discovery of the transistor effect' [2]. Since then many new forms of the transistor have been developed and understanding of the underlying properties is constantly advancing. In this issue Chen and Shih and colleagues at Taiwan National University and Drexel University report a pyroelectrics transistor. They show how a novel optothermal gating mechanism can modulate the current, allowing a range of developments in nanoscale optoelectronics and wireless devices [3]. The explosion of interest in nanoscale devices in the 1990s inspired electronics researchers to look for new systems that can act as transistors, such as carbon nanotube [4] and silicon nanowire [5] transistors. Generally these transistors function by raising and lowering an energy barrier of k(B)T( -1), but researchers in the US and Canada have demonstrated that the quantum interference between two electronic pathways through aromatic molecules can also modulate the current flow [6]. The device has advantages for further miniaturization where energy dissipation in conventional systems may eventually cause complications. Interest in transistor technology has also led to advances in fabrication techniques for achieving high production quantities, such as printing [7]. Researchers in Florida in the US demonstrated field effect transistor behaviour in devices fabricated from chemically reduced graphene oxide. The work provided an important step forward for graphene electronics, which has been hampered by difficulties in scaling up the mechanical exfoliation techniques required to produce the high-quality graphene often needed for functioning devices [8]. In Sweden, researchers have developed a transistor design that they fabricate using standard III-V parallel processing, which also has great promise for scaling up production. Their transistor is based on a vertical array of InAs nanowires, which provide high electron mobility and the possibility of high-speed and low-power operation [9]. Different fabrication techniques and design parameters can influence the properties of transistors. Researchers in Belgium used a new method based on high-vacuum scanning spreading resistance microscopy to study the effect of diameter on carrier profile in nanowire transistors [10]. They then used experimental data and simulations to gain a better understanding of how this influenced the transistor performance. In Japan, Y Ohno and colleagues at Nagoya University have reported how atomic layer deposition of an insulating layer of HfO(2) on carbon nanotube field effect transistors can change the carrier from p-type to n-type [11]. Carrier type switching-'ambipolar behaviour'-and hysteresis of carbon nanotube network transistors can make achieving reliable device performance challenging. However studies have also suggested that the hysteretic properties may be exploited in non-volatile memory applications. A collaboration of researchers in Italy and the US demonstrated transistor and memory cell behaviour in a system based on a carbon nanotube network [13]. Their device had relatively fast programming, good endurance and the charge retention was successfully enhanced by limiting exposure to air. Progress in understanding transistor behaviour has inspired other innovations in device applications. Nanowires are notoriously sensitive to gases such as CO, opening opportunities for applications in sensing using one-dimensional nanostructure transistors [12]. The pyroelectric transistor reported in this issue represents an intriguing development for device applications of this versatile and ubiquitous electronics component [3]. As the researchers point out, 'By combining the photocurrent feature and optothermal gating effect, the wide range of response to light covering ultraviolet and infrared radiation can lead to new nanoscale optoelectronic devices that are suitable for remote or wireless applications.' In nanotechnology research and development, often the race is on to achieve reliable device behaviour in the smallest possible systems. But sometimes it is the innovations in the approach used that revolutionize technology in industry. The pyroelectric transistor reported in this issue is a neat example of the ingenious innovations in this field of research. While in research the race is never really over, as this work demonstrates the journey itself remains an inspiration. References [1] Bardeen J and Brattain W H 1948 The transistor, a semi-conductor triode Phys. Rev 74 230-1 [2] Shockley W B, Bardeen J and Brattain W H 1956 The nobel prize in physics www.nobelprize.org/nobel_prizes/physics/laureates/1956/# [3] Hsieh C-Y, Lu M-L, Chen J-Y, Chen Y-T, Chen Y-F, Shih W Y and Shih W-H 2012 Single ZnO nanowire-PZT optothermal field effect transistors Nanotechnology 23 355201 [4] Tans S J, Verschueren A R M and Dekker C 1998 Room-temperature transistor based on a single carbon nanotube Nature 393 49-52 [5] Cui Y, Zhong Z, Wang D, Wang W U and Lieber C M 2003 High performance silicon nanowire field effect transistors Nano Lett. 3 149-52 [6]Stafford C A, Cardamone D M and Mazumdar S 2007 The quantum interference effect transistor Nanotechnology 18 424014 [7] Garnier F, Hajlaoui R, Yassar A and Srivastava P 1994 All-polymer field-effect transistor realized by printing techniques Science 265 1684-6 [8] Joung D, Chunder A, Zhai L and Khondaker S I 2010 High yield fabrication of chemically reduced graphene oxide field effect transistors by dielectrophoresis Nanotechnology 21 165202 [9] Bryllert T, Wernersson L-E, L¨owgren T and Samuelson L 2006 Vertical wrap-gated nanowire transistors Nanotechnology 17 S227-30 [10] Schulze A et al 2011 Observation of diameter dependent carrier distribution in nanowire-based transistors Nanotechnology 22 185701 [11] Moriyama N, Ohno Y, Kitamura T, Kishimoto S and Mizutani T 2010 Change in carrier type in high-k gate carbon nanotube field-effect transistors by interface fixed charges Nanotechnology 21 165201 [12] Bartolomeo A D, Rinzan M, Boyd A K, Yang Y, Guadagno L, Giubileo F and Barbara P 2010 Electrical properties and memory effects of field-effect transistors from networks of single-and double-walled carbon nanotubes Nanotechnology 21 115204 [13] Liao L et al 2009 Multifunctional CuO nanowire devices: P-type field effect transistors and CO gas sensors Nanotechnology 20 085203.     

Repair and stabilization in confined nanoscale systems — inorganic nanowires within single-walled carbon nanotubes

Repair is ubiquitous in biological systems, but rare in the inorganic world. We show that inorganic nanoscale systems can however possess remarkable repair and reconfiguring capabilities when subjected to extreme confinement. Confined crystallization inside single-walled carbon nanotube (SWCNT) templates is known to produce the narrowest inorganic nanowires, but little is known about the potential for repair of such nanowires once crystallized, and what can drive it. Here inorganic nanowires encapsulated within SWCNTs were seen by high-resolution transmission electron microscopy to adjust to changes in their nanotube template through atomic rearrangement at room temperature. These observations highlight nanowire repair processes, supported by theoretical modeling, that are consistent with atomic migration at fractured, ionic ends of the nanowires encouraged by long-range force fields, as well as release-blocking mechanisms where nanowire atoms bind to nanotube walls to stabilize the ruptured nanotube and allow the nanowire to reform. Such principles can inform the design of nanoscale systems with enhanced resilience.      

DFT Modeling of Bulk-Modulated Carbon Nanotube Field-Effect Transistors

We report density-functional theory (DFT) atomistic simulations of the nonequilibrium transport properties of carbon nanotube (CNT) field-effect transistors (FETs). Results have been obtained within a self-consistent approach based on the nonequilibrium Green's functions (NEGF) scheme. We show that, as the current modulation mechanism is based on the local screening properties of the nanotube channel, a completely new, negative quantum capacitance regime can be entered by the device. We show how a well-tempered device design can be accomplished in this regime by choosing suitable doping profiles and gate contact parameters. At the same time, we detail the fundamental physical mechanisms underlying the bulk-switching operation, including them in a very practical and accurate model, whose parameters can be easily controlled in order to improve the device performance. The dependence of the nanotube screening properties on the temperature is finally explained by means of a self-consistent temperature analysis     

Method for predicting f/sub T/ for carbon nanotube FETs

A method based on a generic small-signal equivalent circuit for field-effect transistors is proposed for predicting the unity-current-gain frequency f/sub T/ for carbon-nanotube devices. The key to the useful implementation of the method is the rigorous estimation of the values for the components of the equivalent circuit. This is achieved by numerical differentiation of the charges and currents resulting from self-consistent solutions to the equations of Schrodinger and Poisson. Sample results are presented, which show that f/sub T/ can have a very unusual dependence on the gate-source bias voltage. This behavior is due mainly to the voltage dependence of the transconductance and capacitance in the presence of quasi-bound states in the nanotube.     

Single carbon nanotube transistor at GHz frequency

We report on microwave operation of top-gated single carbon nanotube transistors. From transmission measurements in the 0.1-1.6 GHz range, we deduce device transconductance gm and gate-nanotube capacitance Cg of micro- and nanometric devices. A large and frequency-independent gm approximately 20 microS is observed on short devices, which meets the best dc results. The capacitance per unit gate length of 60 aF/microm is typical of top gates on a conventional oxide with epsilon approximately 10. This value is a factor of 3-5 below the nanotube quantum capacitance which, according to recent simulations, favors high transit frequencies fT=gm/2piCg. For our smallest devices, we find a large fT approximately 50 GHz with no evidence of saturation in length dependence.     

Debye screening in single-molecule carbon nanotube field-effect sensors

Point-functionalized carbon nanotube field-effect transistors can serve as highly sensitive detectors for biomolecules. With a probe molecule covalently bound to a defect in the nanotube sidewall, two-level random telegraph noise (RTN) in the conductance of the device is observed as a result of a charged target biomolecule binding and unbinding at the defect site. Charge in proximity to the defect modulates the potential (and transmission) of the conductance-limiting barrier created by the defect. In this Letter, we study how these single-molecule electronic sensors are affected by ionic screening. Both charge in proximity to the defect site and buffer concentration are found to affect RTN amplitude in a manner that follows from simple Debye length considerations. RTN amplitude is also dependent on the potential of the electrolyte gate as applied to the reference electrode; at high enough gate potentials, the target DNA is completely repelled and RTN is suppressed.     

Chemical optimization of self-assembled carbon nanotube transistors

We present the improvement of carbon nanotube field effects transistors (CNTFETs) performances by chemical tuning of the nanotube/substrate and nanotube/electrode interfaces. Our work is based on a method of selective placement of individual single walled carbon nanotubes (SWNTs) by patterned aminosilane monolayer and its use for the fabrication of self-assembled nanotube transistors. This method brings a relevant solution to the problem of systematic connection of self-organized nanotubes. The aminosilane monolayer reactivity can be used to improve carrier injection and doping level of the SWNT. We show that the Schottky barrier height at the nanotube/metal interface can be diminished in a continuous fashion down to an almost ohmic contact through these chemical treatments. Moreover, sensitivity to 20 ppb of triethylamine is demonstrated for self-assembled CNTFETs, thus opening new prospects for gas sensors taking advantages of the chemical functionality of the aminosilane used for assembling the CNTFETs.