(3Z,6Z,9Z)-Nonadecatriene and enantiomers of (3Z,9Z)-cis-6,7-Epoxy-nonadecadiene as sex attractants for two geometrid and one noctuid moth species

Sex attractants for the geometrid mothsEufidonia convergaria andCaripeta angustiorata, and the noctuid mothRivula propinqualis have been elucidated during field screening of a series of (3Z,6Z,9Z)-triene hydrocarbons (C_17–22), and the racemic and enantiomerically enriched monoepoxydienes derived from those hydrocarbons. Biologically active compounds were identified by a combination of field testing of synthetic standards, electroantennography, and coupled gas chromatography-electroantennogram detection.E. convergaria males were optimally attracted by a 11 blend of (3Z,9Z)-(6S,7R)-epoxy-nonadecadiene (3Z,9Z-6S,7R-epoxy-19H); other abbreviations follow the same system) with (3Z,6Z,9Z)-nonadecatriene (3Z,6Z,9Z-19H). The 6R,7S enantiomer of the epoxide had no apparent biological activity, either as an attractant or as a behavioral antagonist. Male moths also were attracted to blends of the C₁₈ and C₂₀ homologs of the triene and the epoxide. 3Z,6Z,9Z-19H and 3Z,6Z-cis-6,7-epoxy-19H were identified inE. convergaria female pheromone gland extracts. Males of the geometrid moth speciesC. angustiorata were attracted by a 11 blend of 3Z,6Z,9Z-19H and enantiomerically enriched 3Z,9Z-6R,7S-epoxy-19H. Males of the noctuid mothR. propinqualis were attracted by an approximately 101 blend of 3Z,6Z,9Z-19H and enantiomerically enriched 3Z,9Z-6S, 7R-epoxy-19H. The components were synergistic, with neither being attractive alone. The blend ratio was quite specific, as the attractiveness of blends decreased sharply on either side of the optimum ratio.Issued as NRC No. 30266.     

(Z)-11-Hexadecenal and (3Z,6Z,9Z)-tricosatriene: sex pheromone components of the red banded mango caterpillar Deanolis sublimbalis

The sex pheromone of the red banded mango caterpillar, Deanolis sublimbalis (Lepidoptera: Crambidae), a serious pest of the mango Mangifera indica (Anacardiaceae) in India and Southeast Asia and a recent invader into northern Australia, has been identified. Three candidate compounds were identified from pheromone gland extracts of female moths, using gas chromatography (GC), GC-electroantennographic detection and GC-mass spectrometric analyses, in conjunction with dimethyldisulfide derivatization. Field bioassays established that both (Z)-11-hexadecenal (Z11-16:Ald) and (3Z,6Z,9Z)-tricosatriene (3Z,6Z,9Z-23:Hy) were required for attraction of male D. sublimbalis moths, and 1,000 μg of a 1:1 mix of Z11-16:Ald and 3Z,6Z,9Z-23:Hy was more attractive to male moths than caged virgin females. However, the binary blend was only attractive when the isomeric purity of the monounsaturated aldehyde was >99%, suggesting that the (E)-isomer was inhibitory. Although (Z)-11-hexadecen-1-ol (Z11-16:OH) was tentatively identified in gland extracts, the addition of this compound to the binary blend did not increase the numbers of moths captured. The pheromone can now be used in integrated pest management strategies. Electronic Supplementary Material Supplementary material is available for this article at and is accessible for authorized users.     

Abraxas grossulariata L. (Lepidoptera: Geometridae): Identification of (3Z,6Z,9Z)-3,6,9-heptadecatriene and (6Z,9Z)-6,9-cis-3,4-epoxyheptadecadiene in the female sex pheromone

(3Z,6Z,9Z)-3,6,9-Heptadecatriene and (6Z,9Z)-6,9-cis-3,4-epoxyheptadecadiene have been identified in female sex pheromone gland extracts ofAbraxas grossulariata L. (Lepidoptera: Geometridae). The compounds were detected by gas chromatography with electroantennographic detection (GC-EAD) and identified by GC-mass spectrometry (GC-MS). The amounts of hydrocarbon and epoxide were 0.13 and 0.42 ng/female, respectively. These identifications were confirmed by synthesis; the absolute configuration of the epoxide remains to be determined. Another isomeric epoxide, (3Z,6Z)-3,6-cis-9,10-epoxyheptadecadiene, was tentatively identified in small amounts (0.04 ng/female). Racemic (6Z,9Z)-6,9-cis-3,4-epoxyheptadecadiene elicited the largest electroantennogram response within a series of heptadecadiene and nonadecadiene monoepoxides and the corresponding trienic hydrocarbons and, in field tests, attracted maleA. grossulariata into traps. Addition of 10% (3Z,6Z,9Z)-3,6,9-heptadecatriene to this epoxide enhanced attractiveness; addition of (3Z,6Z)-3,6-cis-9,10-epoxyheptadecadiene had no effect at low proportions while higher proportions caused a reduction in the numbers of males caught.     

产品和部件的渗透剂无损检测——澳大利亚金属和材料无损检测标准 AS2062-1997(3)

(续2006年第5期)附录B本附录提供了不同尺寸显示缺陷的验收准则的实例(资料性的)。本附录包括的内容在于协助最大允许缺陷尺寸的分类。附录包含表1(B1)和表2(B2)。倘若没有其他标准可用,可参考表1和表2中所给出的可用于确定最大缺陷尺寸的验收准则实例。表1中:①特殊的验收极限     

Synthesis and Biological Characterization of (Z)-9-Heptadecenoic and (Z)-6-Methyl-9-Heptadecenoic Acids: Fatty Acids with Antibiotic Activity Produced by Pseudozyma flocculosa

Difficulties in isolating and purifying antibiotic fatty acids from culture filtrates of Pseudozyma flocculosa, a biocontrol agent against powdery mildew, have been limiting factors in studying the properties and understanding the mode of action of the biocontrol agent. We report a new protocol for synthesizing (Z)-9-heptadecenoic and for the first time synthesis of (Z)-6-methyl-9-heptadecenoic acids, two antibiotic fatty acids produced by P. flocculosa. This allowed reproducible and quantifiable means of assaying biological activity of the molecules. In these bioassays, both molecules exhibited antifungal activity corresponding to their expected potency. These new developments should facilitate further studies aimed at deciphering the ecological properties of P. flocculosa.     

Synthesis and Characterization of Diepoxyalkenes Derived from (3Z,6Z,9Z)-Trienes: Lymantriid Sex Pheromones and Their Candidates

All stereoisomers of three diepoxyalkenes derived from (3Z,6Z,9Z)-trienes with a C₂₁, C₁₉, or C₁₈ straight chain, lymantriid sex pheromones and their candidates, were synthesized by MCPBA oxidation of optically active epoxyalkadienes. Their chromatographic behaviors were examined with GC and LC equipped with achiral and chiral columns. Detailed inspection of the mass spectra of these epoxides indicated the following diagnostic ions for determining the chemical structures: m/z 128, 167, M-87 and M-85 for (Z)-cis-3,4-cis-6,7-diepoxy-9-enes; m/z 111, M-125 and M-69 for (Z)-cis-6,7-cis-9,10-diepoxy-3-enes; and m/z M-125 and M-139 for (Z)-cis-3,4-cis-9,10-diepoxy-6-enes. Mass chromatographic analysis that monitored these fragment ions revealed the existence of a new pheromonal compound with a C₂₁ chain in an extract from virgin females of a lymantriid species, Perina nuda F. The three diepoxyalkenes were converted into the corresponding DMDS adducts, which showed characteristic ions from fragmentation between the two thiomethyl groups, reflecting the position of an original double bond.     

Facile and Stereoselective Synthesis of (Z)-15-Octadecenoic Acid and (Z)-16-Nonadecenoic Acid: Monounsaturated Omega-3 Fatty Acids

Facile syntheses of the monounsaturated omega-3 fatty acids, (Z)-15-octadecenoic acid and (Z)-16-nonadecenoic acid, are presented. Commercially available hydroxy fatty acids were esterified and oxidised, followed by the Wittig reaction to introduce the omega-3 olefinic bond; hydrolysis yielded the omega-3 fatty acids in high purity. An examination of different reaction conditions for the Wittig step found that THF as solvent and coupling temperatures of ?78 °C gave optimal stereoselectivity, affording the omega-3 olefins in Z:E ratios ≥97:3. The syntheses have overall yields of ~43%, and utilise straightforward, robust chemistry, that may be readily scaled up and reproduced. Also presented is a method for accurately determining the double bond geometry and isomeric purity of the fatty acid products using ¹H–¹³C-HSQC NMR and GC–MS, respectively.     

红色荧光粉YAl3(BO3)4:Eu3+的制备及发光性能研究

以稀土氧化物、硝酸铝和硼酸为原料,高温固相反应制备了单相红色荧光粉YAl3(BO3)4:Eu3+,用X射线衍射和发射光谱对荧光粉末的结构和发光性能进行了分析.研究了煅烧温度、Eu3+掺杂量对其发光性能的影响.结果表明,反应物在1 250 ℃下煅烧可制得单相YAl3(BO3)4:Eu3+晶体,在YAl3(BO3)4:Eu3+晶体中,Eu3+取代了YAl3(BO3)4晶体中Y3+,占据了非对称中心格位.在394 nm的紫外光激发下,YAl3(BO3)4:Eu3+荧光粉具有很强的发光性能,与(Y,Gd)BO3:Eu3+荧光粉相比,最强发射线波长由596 nm变为618 nm,由橙红色光变为红色光,色纯度有了很大提高.Eu3+的最佳掺杂量为8%(物质的量分数).     

Merging Biological Self-Assembly with Synthetic Chemical Tailoring: The Potential for 3-D Genetically Engineered Micro/Nano-Devices (3-D GEMS)

Appreciable global efforts are underway to develop processes for fabricating three-dimensional (3-D) nanostructured assemblies for advanced devices. Widespread commercialization of such devices will require: (i) precise 3-D fabrication of chemically tailored structures on a fine scale and (ii) mass production of such structures on a large scale. These often-conflicting demands can be addressed with a revolutionary new paradigm that couples biological self-assembly with synthetic chemistry: B ioclastic a nd S hape-preserving I norganic C onversion (BaSIC). Nature provides numerous examples of microorganisms that assemble biominerals into intricate 3-D structures. Among the most spectacular of these microorganisms are diatoms (unicellular algae). Each of the tens of thousands of diatom species assembles silica nanoparticles into a microshell with a distinct 3-D shape and pattern of fine (nanoscale) features. The repeated doubling associated with biological reproduction enables enormous numbers of such 3-D microshells to be generated (e.g., only 40 reproduction cycles can yield >1 trillion 3-D replicas!). Such genetic precision and massive parallelism are highly attractive for device manufacturing. However, the natural chemistries assembled by diatoms (and other microorganisms) are rather limited. With BaSIC processes, biogenic assemblies can be converted into a wide variety of new functional chemistries, while preserving the 3-D morphologies. Ongoing advances in genetic engineering promise to yield microorganisms tailored to assemble nanoparticle structures with device-specific shapes. Large-scale culturing of such genetically tailored microorganisms, coupled with shape-preserving chemical conversion (via BaSIC processes), would then provide low-cost 3-D G enetically E ngineered M icro/nano-devices (3-D GEMs).     

(Z)-3-hexenyl (R)-3-hydroxybutanoate: a male specific compound in three North American decorator wasps Eucerceris rubripes, E. conata and E. tricolor

The males of the decorator wasps Eucerceris have been observed to display abdomen-dragging behavior on plants surrounding their nest. It is thought that this applies a territorial-marking sex pheromone that serve to alert females to the males' territory for courtship and mating. The extracts of three species E. rubripes, E. conata, and E. tricolor have been analyzed by GC-MS. The gas chromatograms revealed the presence, in large quantities, of one common volatile compound in the male head extracts. By analogy with the closely related bee wolves Philanthus, we believe the pheromone is produced in the mandibular glands. Utilizing mass spectrometry, microreactions, FT-IR, and ¹H and ¹³C NMR spectroscopy the structure of the pheromone was proposed to be (Z)-3-hexenyl 3-hydroxybutanoate, which was confirmed by synthesis. The absolute configuration of the chiral center was determined to be R for the three species by preparing the Mosher esters of the insect samples and comparing their GC retention times with a synthetic sample of known absolute configuration. In addition 2- and 3-hexenoic acid and some aromatic compounds were also found in varying quantities in both males and females along with hydrocarbons and fatty acids, although no species-specific profiles emerged.     

Characterization of chemically modified poly(3-hydroxy-alkanoates) and their performance as matrix for hormone release

Partially degraded and trans-esterified poly(3-hydroxybutyrate) and its copolymer with hydroxyvalerate (22 mol-%) were prepared and characterized by GPC, DSC, X-ray diffraction and scanning electron microscopy with the purpose to improve them as release matrix in comparison with the original non-modified polymer. Microencapsulation by double emulsion (water-oil-water) of peptide hormones in these modified polymers was carried out with the aim to study the release properties of follicle stimulating hormone and leuthicine hormone. However, in spite of the stability attained for the primary emulsion, by using surfactant in the oil phase and other additives such as palmitic acid, it is unavoidable to lose a fraction of the initial amount of biomaterial. Release drug profiles obeyed the Fickian-type t^1/2 dependence, indicating that diffusion is the controlling step. Two release patterns were observed. Release profiles for low drug loading microparticles attained a plateau after about 100 h. However, higher drug loading microparticles did not show such a plateau at that time indicating a slower release rate. Furthermore, a two-step profile was observed, exhibiting an initial slower and a second faster step. These observations lead to consider that a portion of the biomaterial is dispersed near the particle surface and the remaining in the core.     

Directionally solidified Al2O3-ME3Al5O12 (ME: Y,Er and Yb) eutectic coatings for thermophotovoltaic systems

Selective emitters for thermophotovoltaic systems consisting of directionally solidified Al₂O₃-ME₃Al₅O₁₂ (ME: Y, Er and Yb) eutectic coatings on Al₂O₃ substrates were produced and characterizated. Coatings were deposited by dip-coating on cylindrical substrates. After sintering, a continuous-wave CO₂ laser was used to produce the surface resolidification. The optimization of the processing parameters yielded dense eutectic coatings with good adhesion to the substrate and with 90–200 µm in thickness. All coatings were free of voids and showed a eutectic microstructure consisting of a three dimensional interpenetrated network of Al₂O₃ and ME₃Al₅O₁₂. The mechanical properties of the coatings (hardness and fracture toughness) were evaluated by indentation techniques. Thermal emission was studied by heating the rods with a CO₂ laser at temperatures between 1000 and 1400 °C. Selective emission was observed in Er³⁺ and Yb³⁺ based coatings and attributed to the electronic transitions of the rare earth ions. Er³⁺-coatings showed the best emission properties as selective emitters for thermophotovoltaic converters.     

Stannum-(II) dopant effects on morphology evolution and upconversion performance of Yb3+/Er3+:NaGdF4 crystals

Hexagonal Yb³⁺/Er³⁺:NaGdF₄ nanocrystals codoped with Sn²⁺ ions were prepared via a modulated solvothermal method. Upon introducing 25mol% Sn²⁺ ions into the host lattice by substituting Gd³⁺ ions, a portion of Yb³⁺/Er³⁺:NaGdF₄ nanocrystals was converted into nanorods. Meanwhile, the upconversion (UC) luminescence intensity of 542 nm and 652 nm were intensified by 24 and 33 times respectively, when compared with samples without Sn²⁺ ions doping. The effect of Sn²⁺ ions doping content on the morphology and UC emission performances of Yb³⁺/Er³⁺:NaGdF₄ nanocrystals were discussed in detail. The enhancement of UC luminescence intensity could be attributed to the growth of UC nanocrystals and the low crystal local symmetry around Yb³⁺/Er³⁺ ion pairs. This study may be beneficial for fabricating high-performance UC materials and realizing their practical applications.     

Scalable synthesis of Na3V2(PO4)3/C with high safety and ultrahigh-rate performance for sodium-ion batteries

NASICON-type Na₃V₂(PO₄)₃ is a promising electrode material for developing advanced sodium-ion batteries. Preparing Na₃V₂(PO₄)₃ with good performance by a cost-effective and large-scale method is significant for industrial applications. In this work, a porous Na₃V₂(PO₄)₃/C cathode material with excellent electrochemical performance is successfully prepared by an agar-gel combined with freeze-drying method. The Na₃V₂(PO₄)₃/C cathode displayed specific capacities of 113.4 mAh·g^-1, 107.0 mAh·g^-1 and 87.1 mAh·g^-1 at 0.1 C, 1 C and 10 C, respectively. For the first time, the 500-mAh soft-packed symmetrical sodium-ion batteries based on Na₃V₂(PO₄)₃/C electrodes are successfully fabricated. The 500-mAh symmetrical batteries exhibit outstanding low temperature performance with a capacity retention of 83% at 0 ℃ owing to the rapid sodium ion migration ability and structural stability of Na₃V₂(PO₄)₃/C. Moreover, the thermal runaway features are revealed by accelerating rate calorimetry (ARC) test for the first time. Thermal stability and safety of the symmetrical batteries are demonstrated to be better than lithium-ion batteries and some reported sodium-ion batteries. Our work makes it clear that the soft-packed symmetrical sodium ion batteries based on Na₃V₂(PO₄)₃/C have a prospect of practical application in high safety requirement fields.     

Synthesis and electrochemical performance of LiVOPO4–Li3V2(PO4)3 cathode materials for lithium ion batteries

Lithium-ion batteries (LIBs) present the advantages of long cycle life, high voltage, and energy density and are widely made in the field of energy storage. LiVOPO₄ (LVOP), a cathode material used in LIBs, has a high conceptual capacity of 159 mAh g⁻¹ and high operating voltage of 3.9 V. However, its low electrical conductivity and cycle performance limit its commercial applications. According to the X-ray diffraction results, orthogonal crystal LVOP and monoclinic crystal Li₃V₂(PO₄)₃ (LVP) coexisted in the synthesised composite material. The transmission electron microscopy results also indicated that the LVOP and LVP phases coexist, which were coated by carbon layer of about 2.5 nm. The discharge of LVOP–LVP composite material initially was 143.2 mAh g⁻¹, and that after 120 cycles was 132.2 mAh g⁻¹ (at 0.1 C and 3–4.5 V). Thus, the electronic conductivity and first discharge specific capacity of the material enhanced due to the introduction of fast ion conductor LVP into LVOP. Electrochemical performance improved because the introduction of LVP led to an increase in Li⁺ pervasion channels in the original material and the acceleration of the Li⁺ transmission speed.     

Synthesis,Structure Characterization and Biological Activity of Co (II), Cu (II), and Zn (II) Complexes with (Z)‐3‐((3‐hydroxybenzylidene)amino)pyridin‐1‐ium 4‐(dodecan‐4‐yl)benzenesulfonate Surfactant

(Z)‐3‐((3‐hydroxybenzylidene)amino)pyridin‐1‐ium4‐dodecylbenzenesulfonate anionic surfactant and its cobalt, copper and zinc complexes were synthesized (I, I‐Co, I‐Cu and I‐Zn). The chemical structures of it were characterized by elemental analysis, FTIR, ¹H‐NMR, UV–Vis spectroscopy and atomic adsorption. The effects of the chemical structures of the synthesized anionic surfactant and the type of transition metals on the surface activity are presented in this paper. The thermodynamic parameters show that adsorption and micellization processes are spontaneous. The results of biological activity measurements showed that the synthesized compounds have a great efficiency against gram positive (Bacillus subtilis and Staphylococcus aureus), gram‐ negative bacteria (Pseudomonas aeruginosa and Escherichia coli) and fungi (Candida albicans and Aspergillus niger) as well as the sulfate reducing bacteria (Desulfomonas pigra). The complexation of the anionic surfactant with Co²⁺, Cu²⁺ and Zn²⁺ increase the antimicrobial activity values.     

The second ACTRIS inter-comparison (2016) for Aerosol Chemical Speciation Monitors (ACSM): Calibration protocols and instrument performance evaluations

This work describes results obtained from the 2016 Aerosol Chemical Speciation Monitor (ACSM) intercomparison exercise performed at the Aerosol Chemical Monitor Calibration Center (ACMCC, France). Fifteen quadrupole ACSMs (Q_ACSM) from the European Research Infrastructure for the observation of Aerosols, Clouds and Trace gases (ACTRIS) network were calibrated using a new procedure that acquires calibration data under the same operating conditions as those used during sampling and hence gets information representative of instrument performance. The new calibration procedure notably resulted in a decrease in the spread of the measured sulfate mass concentrations, improving the reproducibility of inorganic species measurements between ACSMs as well as the consistency with co-located independent instruments. Tested calibration procedures also allowed for the investigation of artifacts in individual instruments, such as the overestimation of m/z 44 from organic aerosol. This effect was quantified by the m/z (mass-to-charge) 44 to nitrate ratio measured during ammonium nitrate calibrations, with values ranging from 0.03 to 0.26, showing that it can be significant for some instruments. The fragmentation table correction previously proposed to account for this artifact was applied to the measurements acquired during this study. For some instruments (those with high artifacts), this fragmentation table adjustment led to an “overcorrection” of the f44 (m/z 44/Org) signal. This correction based on measurements made with pure NH₄NO₃, assumes that the magnitude of the artifact is independent of chemical composition. Using data acquired at different NH₄NO₃ mixing ratios (from solutions of NH₄NO₃ and (NH₄)₂SO₄) we observe that the magnitude of the artifact varies as a function of composition. Here we applied an updated correction, dependent on the ambient NO₃ mass fraction, which resulted in an improved agreement in organic signal among instruments. This work illustrates the benefits of integrating new calibration procedures and artifact corrections, but also highlights the benefits of these intercomparison exercises to continue to improve our knowledge of how these instruments operate, and assist us in interpreting atmospheric chemistry.