共查询到20条相似文献,搜索用时 109 毫秒
1.
北京:积极推进节约型园林绿化 总被引:1,自引:0,他引:1
·编者按· 实施节约园林,是当今世界非常关注的问题,更是人类对自己所生存的环境关爱的明智之举.本期专题围绕"节约园林"这个行业的热门话题,邀请北京、上海、广州三个城市的专家领导和从事设计、科研、建设的专家,结合自己的实践各抒己见,并介绍推荐了许多好的做法,给读者以启发和借鉴. 相似文献
2.
十年前,建筑界最精力充沛的探险家瑞姆·库哈斯带领着他的哈佛团队潜入珠三角,以一部后来被冠名为"大跃进"的集体著作,拉开一个区域被大笔书写的序幕。此后的十年,以广州、深圳为中心的珠三角城市故事作为一种全新的模式受到世界关注。这里发生的一切好像一部美国西部大开发历史,曾经蛮荒的土地上,城市运动带来的变化令人目眩神迷。 相似文献
3.
问:能否介绍一下您在怎样的背景下提出2007深圳·香港城市\建筑双城双年展的主题——"城市的过期和再生"?马清运:一般说来对于城市的理解有两种学派,一种学派认为城市是通过时间的孕育和历史的演变自然而然生长出来的,是一个有机体,所有的有机体都有生、长、熟、死的过程。但这恰恰违背我们盖房子和建城市 相似文献
4.
5.
6.
2005年4月8日,在”四面荷花三面柳,一城山色半城湖”的文化名城济南,山东临工工程机械有限公司迎来了喜庆的日子。经国家人事部批准,临工博士后科研工作站正式成立,同时挂牌的还有临工工程机械研究所。出席挂牌典礼的有山东省人事厅的领导、临沂市人民政府的领导、中国工程机械工业协会的领导,还有吉林大学、同济大学、长安大学、山西科技大学、北京航空航天大学、柳工工程机械集团的专家、教授以及新闻媒体、协作单位的代表。 相似文献
7.
8.
The 121 mining method of longwall mining first proposed in England has been widely used around the world.This method requires excavation of two mining roadways and reservation of one coal pillar to mine one working face.Due to considerable excavation of roadway,the mining roadway is generally destroyed during coal mining.The stress concentration in the coal pillar can cause large deformation of surrounding rocks,rockbursts and other disasters,and subsequently a large volume of coal pillar resources will be wasted.To improve the coal recovery rate and reduce excavation of the mining roadway,the 111 mining method of longwall mining was proposed in the former Soviet Union based on the 121 mining method.The 111 mining method requires excavation of one mining roadway and setting one filling body to replace the coal pillar while maintaining another mining roadway to mine one working face.However,because the stress transfer structure of roadway and working face roof has not changed,the problem of stress concentration in the surrounding rocks of roadway has not been well solved.To solve the above problems,the conventional concept utilizing high-strength support to resist the mining pressure for the 121 and 111 mining methods should be updated.The idea is to utilize mining pressure and expansion characteristics of the collapsed rock mass in the goaf to automatically form roadways,avoiding roadway excavation and waste of coal pillar.Based on the basic principles of mining rock mechanics,the“equilibrium mining”theory and the“short cantilever beam”mechanical model are proposed.Key technologies,such as roof directional presplitting technology,negative Poisson’s ratio(NPR)high-prestress constant-resistance support technology,and gangue blocking support technology,are developed following the“equilibrium mining”theory.Accordingly,the 110 and N00 mining methods of an automatically formed roadway(AFR)by roof cutting and pressure releasing without pillars are proposed.The mining methods have been applied to a large number of coal mines with different overburdens,coal seam thicknesses,roof types and gases in China,realizing the integrated mode of coal mining and roadway retaining.On this basis,in view of the complex geological conditions and intelligent mining demand of coal mines,an intelligent and unmanned development direction of the“equilibrium mining”method is prospected. 相似文献
9.
10.
11.
液压挖掘机工作装置斗齿轨迹的控制 总被引:3,自引:0,他引:3
在挖掘作业中,根据挖掘作业对象的不同要求,挖掘机的作业模式有:转斗缸挖掘、斗杆缸挖掘和三工作缸配合挖掘。若对挖掘深度、水平度和坡度有较高要求时,则需采用三工作缸配合挖掘的模式控制斗齿轨迹。这就要求司机有较高操作技术,而且司机劳动强度大、作业精度低、效率低。本文应用计算机控制技术对实现三个工作液压缸配合挖掘模式控制斗齿轨迹的方法进行了研究。l计算机控制系统的硬件构成挖掘机工作装置计算机控制系统的硬件构成如图1所示,主要包括:计算机、A/D和D/A转换、电液比例方向阀、角度传感器答自回挖掘机工作装置计算… 相似文献
12.
碾压混凝土密实度及其检测与控制 总被引:1,自引:0,他引:1
碾压混凝土施工中 ,现场质量控制尤为重要。现场质量检测以“密实度”为重要控制指标 ,本文就“密实度”这一重要指标的确定提出了自己的看法 ;给出了现场 (仓内 )混凝土质量控制的几个方面 ,并结合实践经验指出常见错误及其改进方法。 相似文献
13.
简要介绍了3款常用的电梯制动器控制方式——电阻分压控制方式、变压器高低压绕组输出控制方式和相控整流控制方式,并创新性地提出一种新型控制方式——全波/半波控制方式。对各种控制方式的优劣性和设计关键点进行简要分析,并根据对不同曳引机制动器的拓展和成本的要求,对各控制方式进行综合评价。 相似文献
14.
针对内部控制在企业中的重要性,介绍了计算机会计系统的开发、发展控制的主要内容,阐述了管理控制和日常控制的内客,以保证企业财产物资的重要性以及企业经济活动的正确性。 相似文献
15.
Eizaburo Tachibana Yutaka Inoue Bernardo C. Creamer 《Computer-Aided Civil and Infrastructure Engineering》1992,7(3):179-189
Abstract: A new fuzzy control method for the reduction of the dynamic response of structures is presented, and is compared with the instantaneous optimal control method. The control forces are determined from preformulated fuzzy rules regarding the velocity and the acceleration of the system. The triangular membership function and the mini-max-gravity method are used in the fuzzyfication and the defuzzyfication process, respectively. In these processes, no material property of the structure such as the mass matrix or the stiffness matrix are needed. This characteristic nature is definitely different from that of optimal control algorithms. Numerical examples are shown in order to compare the performances both of the proposed fuzzy control method and the optimal control method. It appeared that the fuzzy control method is quite useful as regards reliability and robustness. 相似文献
16.
介绍了广州地铁四号线目前地下车站、高架车站采用的由BAS(楼宇自动化系统)实现的照明控制模式,以及笔者推荐的高架车站采用智能照明控制系统的设计方案,包括其系统构成、功能、接口、控制要求等,并对由BAS实现的照明控制系统和智能照明控制系统进行了比较,总结出采用智能照明控制系统的特点和优越性。 相似文献
17.
18.
压力管道安装过程控制 总被引:1,自引:2,他引:1
简述了压力管道过程控制的目的及主要内容,从工艺控制、材料控制、焊接控制、施工控制过程检验和实验控制等方面详细阐述了压力管道安装过程控制,以确保压力管道安全运行。 相似文献
19.
砖混房屋墙体常见裂缝的分析 总被引:7,自引:0,他引:7
对砖混房屋墙体常见裂缝现象作了扼要分析,并结合工程实际,论述了斜向裂缝、竖向裂缝和女儿墙裂缝的控制,提出了在工程设计时控制温度应力及构造等方面应采取的防裂措施。 相似文献
20.
本文针对目前风机盘管系统应用较广泛的三种不同控制方式的控制特性及控制效果进行了实验研究,并对各自的经济性进行了分析。研究结果表明,PI控制的控制效果优于手动控制和位式控制,但其控制成本相对较高。位式控制的控制效果和成本适中,因此,在对控制精度要求不高的场合得到了广泛的应用。 相似文献