共查询到17条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
6.
7.
重金属离子污染具有非降解性、持续存在和累积的性质,影响着人类的生命安全。如何从水中去除重金属离子已经成为治理水污染的核心问题之一,其方法之一就是采用改性蒙脱土进行吸附处理。本文介绍了近年来重金属离子吸附用改性蒙脱土的研究新进展,重点回顾了无机改性蒙脱土、有机改性蒙脱土和无机有机复合改性蒙脱土的改性方法及其对重金属离子的去除能力及机理。提出今后改性蒙脱土研究的主要方向是合成多功能高吸附性的蒙脱土高分子复合微球、蒙脱土高分子凝胶和滤膜材料等,为今后改性蒙脱土作为重金属离子优良吸附剂的研究有一定的指导意义。 相似文献
8.
蒙脱土是最具商业用途的无机高分子化合物。介绍了蒙脱土的化学组成、理化性质和改性方法,综述了改性蒙脱土阻燃高分子材料的研究进展。 相似文献
9.
随着经济社会的发展,污水处理问题已成为人们关注的热点。蒙脱土因孔结构丰富、储量丰富且廉价易得而被广泛用于污水处理领域,目前关于蒙脱土吸附材料的研究多采用酸改性、有机改性等于单一改性手段提升其吸附能力,但单一改性蒙脱土存在功能单一、活性较差等问题。诸多研究者将目光集中于复合改性,文章对复合改性蒙脱土,酸-有机改性、无机-有机改性和有机阴离子-阳离子活性剂改性等的研究进展进行了综述,并对复合改性蒙脱土的制备过程和吸附机理进行了分析。提出今后复合蒙脱土研究的主要方向是合成可利用多种方式实现对所有污染物的无差别处理且易于从溶液中分离再生的蒙脱土,如合成既有吸附性,又有光催化和Fenton氧化能力的复合改性蒙脱土,以期为蒙脱土在实际污水处理中提供一定的理论参考。 相似文献
10.
钠基蒙脱土经过一次插层有机改性和二次插层有机改性后制得有机改性蒙脱土,作为催化剂用于催化不饱和脂肪酸二聚化反应制备二聚酸。采用XRD、SEM、TEM、FTIR和TG等检测手段对有机改性后蒙脱土的内层结构和性质进行分析。实验表明改性后蒙脱土层间距由1.48 nm扩大到3.82 nm,而且保持原来的夹心结构不变。蒙脱土的表面形貌和内部结构发生改变,表面变得疏松,内部层间距扩大且插层剂含量增加,分散实验表明二次插层有机改性蒙脱土在不饱和脂肪酸中分散性能优异。相同条件下,二次插层有机改性蒙脱土催化不饱和脂肪酸二聚化反应,二聚酸产率75.33%,是未改性蒙脱土催化制得二聚酸产率的2.14倍,并通过FTIR、1H NMR和LC-MS证实合成的产物为二聚酸。 相似文献
11.
12.
采用离子交换和配位合成方法,通过配位链将配体引入金属蒙脱土层间,制备了Co-Phen-HAA/MMT负载型催化材料,采用IR,XRD、SEM的现代分析测试技术,分析了催化材料的结构,XRD显示蒙脱土层间距增大0.577nm,表明配体进入金属蒙脱土的片层间;在分子氧的氧化作用下,考察了反应温度、时间、溶剂等因素对苯乙烯环氧化反应的影响.实验结果表明,最佳反应温度82℃,反应时间8 h,苯乙烯的转化率为93.9%,反应活化能41.35 kJ/mol. 相似文献
13.
14.
聚氨酯/蒙脱土纳米复合材料制备及其性能研究 总被引:8,自引:1,他引:8
本文采用蒙脱土纳米材料改性聚氨酯,得到了理想的预期效果。通过单体插层,聚氨酯的单体可插层于蒙脱土中,经过多元醇与异氰酸酯的聚合反应制备了聚氨酯/蒙脱土纳米复合材料。用蒙脱土纳米材料改性聚氨酯,研究结果表明:蒙脱土纳米材料不仅提高了聚氨酯的模量,同时又使其强度不下降,密度不增大,这是加入其他刚性粒子所达不到的。同时探讨了聚氨酯/蒙脱土纳米复合材料之所以具有这些优良的力学性能的理论依据。 相似文献
15.
16.
Zhengfa Zhou Hongbo Zhai Weibing Xu Hanyang Guo Changfeng Liu Wei‐Ping Pan 《应用聚合物科学杂志》2006,101(2):805-809
It is difficult to prepare polyethylene/montmorillonite by direct melt mixing because of the difference in character between polyethylene and montmorillonite. Therefore, it is necessary to modify polyethylene with polar groups, which can increase the hydrophilicity of polyethylene. At the same time, the inorganic montmorillonite should be modified with long‐chain alkyl ammonium to increase the basing space between the interlayers. Thus, through the grafting of the polar monomer onto the main chain of polyethylene by reactive extrusion, polyethylene/montmorillonite nanocomposites can be prepared by the melt mixing of the grafter and organic montmorillonite. Fourier transform infrared has been used to prove that the monomers are grafted onto polyethylene. X‐ray diffraction and transmission electron microscopy have been employed to characterize the nanocomposites. Furthermore, thermogravimetric analysis measurements show that the thermal stability of the nanocomposites is improved in comparison with that of the virgin materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 805–809, 2006 相似文献
17.
Preparation and characterization of novel porous metal/ceramic catalytic membrane materials 总被引:1,自引:0,他引:1
ZhaoHongbin XiongGuoxing GuJinghua ShengShishan H. Bauser N. Stroh K. Pflanz 《Catalysis Today》1995,25(3-4):237-240
In order to obtain improved separation or catalytic activity, we propose a method to modify the surface of porous ceramic membranes by modifying the surface of sol particles. The key technical difficulty of this method is how to get appropriate ligands which can make metal ions adsorb on sol particles in the appropriate pH range in which the sol maintains its dynamic stability. Pd/γ-A12O3 catalytic membrane materials with mesopore and a narrow pore size distribution were prepared by this method. Other kinds of metal/ceramic catalytic membrane materials such as Ni/γ-Al2O3, Pt/γ-Al2O3 can also be obtained by the same method. 相似文献