A 400-MHz random-cycle dual-port interleaved DRAM (D/sup 2/RAM) with standard CMOS Process

This paper describes a standard CMOS process based on embedded DRAM macro with dual-port interleaved DRAM architecture (D/sup 2/RAM), which is suitable for the leading edge CMOS LSIs with both high-speed and large-scale memories on a chip. This macro exploits three key technologies: fully sense-signal-loss compensating technology based on the whole detailed noise element breakdowns, the novel striped trench capacitor (STC) cell, and the write-before-sensing (WBS) circuit by decoded write-bus. A 400-MHz random cycle access has been verified for D/sup 2/RAM fabricated by a 0.15-/spl mu/m standard CMOS process.     

An embedded DRAM with a 143-MHz SRAM interface using a sense-synchronized read/write

This paper describes a 4-Mb embedded DRAM macro using novel fast random cycle architecture with sense-synchronized read/write (SSR/SSW). The test chip has been fabricated with a 0.15-/spl mu/m logic-based embedded DRAM process and the 1.5-V 143-MHz no-wait row random access operation has been confirmed. Data retention power is suppressed to 92 /spl mu/W owing to the hierarchical power supply and SSR. The macro size is 4.59 mm/sup 2/. The cell occupation ratio of the macro is 46%, which is the same as that of a conventional embedded DRAM macro. The macro size and the data retention power are 30% and 4.6%, respectively, of a 4-Mb embedded SRAM macro fabricated by an identical process.     

Design methodology of embedded DRAM with virtual-socketarchitecture

This paper proposes the virtual-socket architecture in order to reduce the design turn-around time (TAT) of the embedded DRAM. The required memory density and the function of the embedded DRAM are system dependent. In the conventional design, the DRAM control circuitry with the DRAM memory array is handled as a hardware macro, resulting in the increase in design TAT. On the other hand, our proposed architecture provides the DRAM control circuitry as a software macro to take advantage of the automated tools based on synchronous circuit design. With array-generator technology, this architecture can achieve high quality and quick turn-around time (QTAT) of flexible embedded DRAM that is almost the same as the CMOS ASIC. We applied this virtual-socket architecture to the development of the 61-Mb synchronous DRAM core using 0.18-μm design rule and confirmed the high-speed operation, 166 MHz at CAS latency of two, and 180 MHz at that of three. The experimental results show that our proposed architecture can be applied to the development of the high-performance embedded DRAM with design QTAT     

A high-density dual-port memory cell operation and arrayarchitecture for ULSI DRAMs

A high-density dual-port DRAM architecture is proposed. It realizes a two-transistor/one-capacitor (2Tr-1C) dual-port memory cell array with immunity against the array noise caused by the dual-port operation. This architecture, called a truly dual-port (TDP) DRAM, adopts the previously proposed divided/shared bit-line (DSB) sensing scheme in a dual-port 2Tr-1C DRAM array. A 2Tr-1C dual-port memory cell array with folded bit-line sensing operation, which does not increase the number of bit lines of the 1Tr-1C folded bit-line memory array, is realized, thus reducing the memory cell size. This architecture offers a solution to the fundamental limitations in the 2Tr-1C dual-port memory cell, and it is easily applicable to dual-port memory cores in ASIC environments. An analysis of the memory array noise in various dual-port architectures shows a significant improvement with this architecture. Applications to the complete pipelining operation of a DRAM array and a refresh-free DRAM core are also discussed     

New nibbled-page architecture for high-density DRAMs

A nibbled-page architecture which can be used to access all column addresses on the selected row address randomly in units of 8 bits at the 100 Mbit/s data rate is discussed. To realize such high-speed architecture, three key circuit techniques have been developed. An on-chip interleaved circuit has been used for the high-speed serial READ and WRITE operations. Column address prefetch and WE signal prefetch techniques have been introduced to eliminate idle time between 8 bit units. The nibbled-page architecture has been successfully implemented in an experimental 16 Mb DRAM, and 100 Mb/s operation has been achieved. The DRAM with nibbled-page mode is very effective in simplifying the design of high-speed data transfer systems     

A 1.8-V embedded 18-Mb DRAM macro with a 9-ns RAS access time andmemory-cell area efficiency of 33%

A 1.8-V embedded 18-Mb DRAM macro with a 9-ns row-address-strobe access time and memory-cell area efficiency of 33% has been successfully developed with a single-side interface architecture, high-speed circuit design, and low-voltage design. In the high-speed circuit design, a multiword redundancy scheme and Y-select merged sense scheme are developed to achieve the performance goal. In the low-voltage design, a dual-complement charge-pump scheme and a decoupling capacitor utilizing a tantalum-oxide capacitor are developed to retain high performance at low supply voltage     

A 1.6 Gbyte/s data transfer rate 8 Mb embedded DRAM

An 8 Mb embedded DRAM has been developed. The salient feature of this embedded DRAM is page fault tolerance. Accessing across different pages can be performed using a minimum column cycle. This feature is achieved by placing a data latch and a transfer gate between the bit line sense amplifier and the column select gate. This DRAM can be reconfigured as separated 2 Mb units when it is embedded as a macro cell of an ASIC library     

DRAM macros for ASIC chips

DRAM macros in 4-Mb (0.8-μm) and 16-Mb (0.5-μm) DRAM process technology generations have been developed for CMOS ASIC applications. The macros use the same area efficient one transistor trench cells as 4-Mb (SPT cell) and 16-R Mb (MINT cell) DRAM products. It is shown that the trench cells with capacitor plates by the grounded substrate are ideal structures as embedded DRAM's. The trench cells built entirely under the silicon surface allow cost effective DRAM and CMOS logic merged process technologies. In the 0.8-μm rule, the DRAM macro has a 32-K×9-b configuration in a silicon area of 1.7×5.0 mm² . It achieves a 27-ns access and a 50-ns cycle times. The other DRAM macro in the 0.5-μm technology is organized in 64 K×18 b. It has a macro area of 2.1×4.9 mm and demonstrated a 23-ns access and a 40-ns cycle times. Small densities and multiple bit data configurations provide a flexibility to ASIC designs and a wide variety of application capabilities. Multiple uses of the DRAM macros bring significant performance leverages to ASIC chips because of the wide data bus and the fast access and cycle times. A data rate more than 1.3 Gb/s is possible by a single chip. Some examples of actual DRAM macro embedded ASIC chips are shown     

A programmable NMOS DRAM controller for microcomputer systems with dual-port memory and error checking and correction

An NMOS DRAM controller for use in microcomputer systems based on the iAPX-86 and iAPX-286 microprocessor families or on the Multibus system bus is described. The controller provides complete support for dual-port memories and memories with error checking and correction. The controller has programmable attributes for configuring it to the particular requirements of the system. The controller uses parallel arbitration to minimize arbitration delay. A memory cycle will start on the same clock edge that samples a command if the cycle has been previously enabled. Novel logic and circuit design techniques have been used to achieve 16 MHz operation, 20 ns input setup time, and 35 ns output delay time.     

An 80/20-MHz 160-mW multimedia processor integrated with embeddedDRAM, MPEG-4 accelerator and 3-D rendering engine for mobileapplications

A low-power multimedia processor for mobile applications is presented. An 80-MHz 32-b RISC with enhanced multiplier, two 20-MHz hardware accelerators with 7.125-Mb embedded DRAM for MPEG-4 visual SP@L1 decoding and 3-D graphics processing, 2-kB dual-port SRAM, and peripheral blocks are integrated together on a single chip, MPEG-4 SP@L1 video decoding and 3-D graphics rendering with a 16-b depth-buffer alpha-blending double-buffering and gouraud-shading features at 2, 2-Mpolygons/s speed are realized with the help of the dedicated hardware accelerators/ The architecture of the processor is optimized in terms of power consumption and performance, and various low-power circuit techniques are adopted in each hardware block. The chip is implemented using 0.18-μm embedded memory logic (EML) technology. Its area is 84 mm², and power consumption is 160 mW when all of the functions are activated     

Compact wide bandwidth dual-port DRAM architecture suitable for mobile multimedia processors

A DRAM architecture capable of providing dual-port interface is presented. The architecture utilises a novel global bitline scheme to obtain a very wide data bandwidth not possible using traditional DRAM architectures. Furthermore, the area penalty is minimised by using a conventional one-transistor one-capacitor cell coupled with special sensing units that have 84.6% more transistor count. The architecture allows simultaneous read and write access using a conventional two-metal DRAM fabrication process.     

A modular architecture for a 6.4-Gbyte/s, 8-Mb DRAM-integratedmedia chip

A modular architecture for a DRAM-integrated, multimedia chip with a data transfer rate of 6 to 12 Gbyte/s is proposed. The architecture offers the design flexibility in terms of both DRAM capacity and the logic-memory interface for use in a wide variety of applications. A DRAM macro built from cascadable DRAM bank modules having a 256-kb memory capacity and 128-b I/Os provides flexibility and reconfigurability of DRAM capacity and a high data transfer rate with an area of 6.4 mm² /Mb. A data transfer circuit (called the “reconfigurable data I/O attachment”), which is attached to the I/O lines of the DRAM macro, provides a flexible logic-memory interface by changing the data-transfer routes between the DRAM macro and logic circuits in real time. A 6.4-Gbyte/s test chip (called the “media chip”) for three-dimensional computer graphics was fabricated to test the proposed design methodology. It integrates an 8-Mb DRAM and four pixel processors on an 8.35×14.6-mm chip by using a 0.4-μm CMOS design rule     

High-performance embedded SOI DRAM architecture for the low-powersupply

This paper presents the high-performance DRAM array and logic architecture for a sub-1.2-V embedded silicon-on-insulator (SOI) DRAM. The degradation of the transistor performance caused by boosted wordline voltage level is distinctly apparent in the low voltage range. In our proposed stressless SOI DRAM array, the applied electric field to the gate oxide of the memory-cell transistor can he relaxed. The crucial problem that the gate oxide of the embedded-DRAM process must be thicker than that of the logic process can be solved. As a result, the performance degradation of the logic transistor can be avoided without forming the gate oxides of the memory-cell array and the logic circuits individually. In addition, the data retention characteristics can be improved. Secondly, we propose the body-bias-controlled SOI-circuit architecture which enhances the performance of the logic circuit at sub-1.2-V power supply voltage, Experimental results verify that the proposed circuit architecture has the potential to reduce the gate-delay time up to 30% compared to the conventional one. This proposed architecture could provide high performance in the low-voltage embedded SOI DRAM     

Embedded DRAM: more than just a memory

Dynamic random access memory has been a viable semiconductor storage medium for more than three decades. Surprisingly, it has only been in the past three years that attempts to combine DRAM with meaningful amounts of Boolean logic, on the same substrate, have occurred. Although much fanfare has accompanied this technological breakthrough, commonly referred to as embedded DRAM, few system designers appreciate the complexity of this new technology, let alone its applicability to other circuit forms. This article provides background information about embedded DRAM technology, provide suggestions on how structural and electrical elements of the embedded DRAM era might be reused in other circuits, and review circuit theory that is directly attributed to the DRAM technology progression     

A 9-ns HIT-delay 32-kbyte cache macro for high-speed RISC

A 32-kB cache macro with an experimental reduced instruction set computer (RISC) is realized. A pipelined cache access to realize a cycle time shorter than the cache access time is proposed. A double-word-line architecture combines single-port cells, dual-port cells, and CAM cells into a memory array to improve silicon area efficiency. The cache macro exhibits 9-ns typical clock-to-HIT delay as a result of several circuit techniques, such as a section word-line selector, a dual transfer gate, and 1.0-μm CMOS technology. It supports multitask operation with logical addressing by a selective clear circuit. The RISC includes a double-word load/store instruction using a 64-b bus to fully utilize the on-chip cache macro. A test scheme allows measurement of the internal signal delay. The test device design is based on the unified design rules scalable through multigenerations of process technologies down to 0.8 μm     

Dynamically shift-switched dataline redundancy suitable for DRAMmacro with wide data bus

A novel dataline redundancy suitable for an embedded DRAM macro with wide data bus is presented. This redundancy reduces the area required for spare cells from 6 to 1.6% of the area required for normal cells and improves chip yield from 50 to 80%. In addition, it provides a high-speed data path. An embedded DRAM macro adopting the redundancy achieves 200-MHz operation and provides 51.2-Gbit/s bandwidth. It has been fabricated with 0.25-μm technology     

A circuit design of intelligent cache DRAM with automaticwrite-back capability

An intelligent cache based on a distributed architecture that consists of a hierarchy of three memory sections-DRAM (dynamic RAM), SRAM (static RAM), and CAM (content addressable memory) as an on-chip tag-is reported. The test device of the memory core is fabricated in a 0.6 μm double-metal CMOS standard DRAM process, and the CAM matrix and control logic are embedded in the array. The array architecture can be applied to 16-Mb DRAM with less than 12% of the chip overhead. In addition to the tag, the array embedded CAM matrix supports a write-back function that provides a short read/write cycle time. The cache DRAM also has pin compatibility with address nonmultiplexed memories. By achieving a reasonable hit ratio (90%), this cache DRAM provides a high-performance intelligent main memory with a 12 ns(hit)/34 ns(average) cycle time and 55 mA (at 25 MHz) operating current     

An access-sequence control scheme to enhance random-accessperformance of embedded DRAM's

An embedded DRAM enables a high data-transfer rate since it provides an on-chip wide-bus interconnection. However, the net data-transfer rate is reduced by page misses because of the inherently large row-access time of DRAM's. We previously proposed a multibank DRAM macro based on a micromodule architecture to overcome this problem. The pipelined access of the DRAM macro is especially useful for regular access in graphics applications. In this paper, we propose an access-sequence control scheme which enhances the random-access performance of embedded DRAMs. Access ID numbers, an access queue register, and a write-data buffer combined with the multibank DRAM enable out-of-sequence access which reduces the page-miss penalty during random access. In the case of four successive accesses, the estimated total access time was, respectively, reduced by up to 38 and 32% for one and two page misses, and for five successive accesses with one or two page misses, it was, respectively, reduced by up to 44 and 45%     

A 312-MHz 16-Mb random-cycle embedded DRAM macro with a power-down data retention mode for mobile applications

An embedded DRAM macro with a self-adjustable timing control (STC) scheme, a negative edge transmission scheme (NET), and a power-down data retention (PDDR) mode is developed. A 13.98-mm/sup 2/ 16-Mb embedded DRAM macro is fabricated in 0.13 /spl mu/m logic-based embedded DRAM process. Co-salicide word lines and MIM capacitors are used for high-speed array operation. The delay timing variation of 36 % for an RC delay can be reduced to 3.8% by using the STC scheme. The NET scheme transfers array control signals to local array blocks with high accuracy. Thereby, the test chip achieves 1.2-V 312-MHz random cycle operation even in the low-power process. 73-/spl mu/W data retention power is realized by using the PDDR mode, which is 5% of conventional schemes.