共查询到20条相似文献,搜索用时 93 毫秒
1.
《世界制造技术与装备市场》2004,(1):58-59
The Shanghai Development and Reform Commission,the Shanghai Munici Commission of Foreign Trade and Econimic Co-operation and jointly issued the“Opinions of the Shanghai Municipality on Encouraging Foreign Investment in Setting up Research and Development Institutions“. 相似文献
2.
《世界制造技术与装备市场》2007,(1):82-83
The next 20 years will see the most radical changes in China's regional economy,according to Xiao Jincheng,deputy director of the National Land Development and Regional Economy Research Institute of the National Development and Reform Commission(NDRC).Xia… 相似文献
3.
4.
《世界制造技术与装备市场》2007,(4):70-71
China has recently published the 11^th Five-Year Plan on Development of the Western Area. A very important condition for continuous and fast progress for western development in China is to raise the opening level to the outside in the region, and the country will further loosen the policy on utilisation of foreign funds. Wang Jinxiang, vice-minister of the National Development and Reform Commission (NDRC) and head of the Western Development Office under the State Council, China's cabinet, explained, when discussing the proposed plan. 相似文献
5.
《世界制造技术与装备市场》2008,(6)
China's National Development and Reform Commission (NDRC)on July 19 issued a circular to further standardise the management of foreign- invested projects in five aspects,in an effort to prevent the potential risks that abnormal inflow of foreign capital may have on healthy development of the Chinese economy and on the balance of international payment. 相似文献
6.
《世界制造技术与装备市场》2010,(2):101-102
Article 1 In order to promote development of equity investment funds and encourage foreign investors to launch foreigninvested equity investment fund management enterprises in Beijing, this measure is promulgated according to the " Approval of the State Council on Supporting Zhongguancun Scientific Park Constructing State-class Independent Innovation Demonstration Zone"(State Council documents, No28,2009), the "Proposals of the CPC Beijing Municipal commission and the People's Government of Beijing on Promoting Finance Development" (Beijing documents, No.8,2008) , the " Proposals of the People's Government of Beijing on Finance Promoting Economic Development in Beijing"(Beijing Government documents, No.7,2009) , and the "Proposals on Promoting development of Equity Investment Fund Industry"(Beijing Finance Office,No.5,2009). 相似文献
7.
《世界制造技术与装备市场》2011,(1):78-79
The Beijing Administration for Industry and Commerce recently published the " Proposals on Further Serving the Development of Foreign-invested 相似文献
8.
Research on design of bicycles is concentrated on mechanism and auto appearance design, however few on matches between the bike and the rider. Since unreasonable human-bike relationship leads to both r... 相似文献
9.
《世界制造技术与装备市场》2007,(2):110
China’s National Development and Reform Commission has recently stated that the country has completed its WTO accession obligations of reducing import duties on automobiles and components. Starting 相似文献
10.
《Instrumentation》2017,(1):53-54
<正>Foundational Theories and Development Trend of Modern Technology·Foundational theories and methodologies in modern instruments·Development trend of test and ... 相似文献
13.
《机电工程技术》2009,38(7):179-184
09-07-13 Research Progress of Polishing Hard Brittle Material by Laser
GUO Xiao-yan, LIU Xiao-fei(Zhongshan Torch Polytechnic, Zhongshan528436, China)
Abstract: The research background of polishing hard brittle material by laser and basic theoretical model are introduced in this paper. Then its mechanism is discussed and the influence factors on the polishing effect are summed up. Finally some predictions of its future development are presented. 相似文献
GUO Xiao-yan, LIU Xiao-fei(Zhongshan Torch Polytechnic, Zhongshan528436, China)
Abstract: The research background of polishing hard brittle material by laser and basic theoretical model are introduced in this paper. Then its mechanism is discussed and the influence factors on the polishing effect are summed up. Finally some predictions of its future development are presented. 相似文献
16.
《机电工程技术》2009,38(6):161-166
09-06-13 Requirements Analysis of CNC Machine Tool IETM System Based on UML JIANG Wei-wei, MA Shao-li, XU Ding-hai, GUO Hong- fen(1.Navy Academe of Armament, Beijing 100161, China; 2. Technical Support Engineering Department of Armored Force Engineering Academy, Beijing 100072, China) 相似文献
17.
18.
《机电工程技术》2009,38(8):207-212
09-08-13 Design of Injection Mould for DVD Door Panel Based on CAE Technology HUANG Gui-jian~, HONG Jian-ming, LIANG Xiong, WU Xiao-yu, LI Ji-bin (1. College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China; 2. School of Mechanical and Electrical Engineering, Shenzhen Polytechnic, Shenzhen518055, China; 3. Shenzhen Key Laboratory of Advanced Mould Manutacturing Technology, Shenzhen University, Shenzhen 5 t 8060, China)
Abstract: The structural feature and forming technology of the DVD door panel were analyzed. By using Moldflow/MPI software, the feed system of the mould was ascertained. The angle pin core-pulling mechanism was adopted and the mechanism set inside the core-pulling slide preventing the plastic parts from adhering to the side core of the mould was designed, so the smooth demoulding of the plastic parts was realized. The structure of the injection mould and working process were discussed. The mould was already in mass production and the plastic parts could meet the customers' technical requirements.
Key words: CAE; injection mould; feed system; core-pulling; slide; demoulding 相似文献
Abstract: The structural feature and forming technology of the DVD door panel were analyzed. By using Moldflow/MPI software, the feed system of the mould was ascertained. The angle pin core-pulling mechanism was adopted and the mechanism set inside the core-pulling slide preventing the plastic parts from adhering to the side core of the mould was designed, so the smooth demoulding of the plastic parts was realized. The structure of the injection mould and working process were discussed. The mould was already in mass production and the plastic parts could meet the customers' technical requirements.
Key words: CAE; injection mould; feed system; core-pulling; slide; demoulding 相似文献
20.
《机电工程技术》2009,38(5):123-126
09-05-13 Design of Injection Mould for Computer Button
XU Yong-jun, JIAN Jian-xiong(Dett.of Mechanical Engineering, Guangdong Vocational College of Industry and Commerce, Guangzhou510510, China)
Abstract: The technological characteristic of computer button, the design and condition of injection forming were analyzed. The key points in design and working process were stated in detail for realizing lateral core-pulling and assuring presentation quality.
Key words: computer button; injection mould; mould design 相似文献
XU Yong-jun, JIAN Jian-xiong(Dett.of Mechanical Engineering, Guangdong Vocational College of Industry and Commerce, Guangzhou510510, China)
Abstract: The technological characteristic of computer button, the design and condition of injection forming were analyzed. The key points in design and working process were stated in detail for realizing lateral core-pulling and assuring presentation quality.
Key words: computer button; injection mould; mould design 相似文献