1-Amino-4-aryl-2(1H)-pyrimidinthione: Acidität und Komplexbildung mit Mn(II), Co(II), Ni(II), Zn(II), Cd(II), Pb(II) und Ag(I)

1-Amino-4-aryl-2(1H)-pyrimidinethiones: Acidity and Complex Formation with Nonferrous Metal Ions and Ag(I) Acid dissociation constants of new 2, 3 and already known 1 substituted 1-amino-4-aryl-2(1H)-pyrimidinethiones and stability constants of their nonferrous metal ion and silver complexes have been measured pH-potentiometrically in a 75% (v/v) mixture of dioxane/water. The influence of the substituents on pK_a- and lgβ_n-values is discussed. The X-ray structure analysis of bis[1-(4-toluenesulfonamido)-4-(4-tolyl)-2(1H)-pyrimidinethionatol]-nickel(II) 5 proves that pyrimidinethiones coordinate via their thione sulphur and aminonitrogen. However, the bond lengths are not levelled in the chelating ring.     

Antibacterial Co(II), Cu(II), Ni(II) and Zn(II) Complexes of Thiadiazoles Schiff Bases

Schiff bases were obtained by condensation of 2-amino-l,3,4-thiadiazole with 5-substituted-salicylaldehydes which were further used to obtain complexes of the type [M(L)(2)]Cl(2), where M=Co(II), Cu(II), Ni(II) or Zn(II). The new compounds described here have been characterized by physical, spectral and analytical data, and have been screened for antibacterial activity against several bacterial strains such as Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. The antibacterial potency of these Schiff bases increased upon chelation/complexation, against the tested bacterial species, opening new aproaches in the fight against antibiotic resistant strains.     

Synthesis, Crystal Structure, Fluorescence and Thermostability of Ni(II), Zn(II), Cd(II) Complexes with Schiff Base 2-Acetylpyridine-d-tryptophan

Three novel transition metal coordination polymers, [Ni(C₁₈H₁₆N₃O₂)₂·2CH₃OH] _n (1), [Zn(C₁₈H₁₆N₃O₂)₂·4CH₃OH] _n (2) and [Cd(C₁₈H₁₆N₃O₂)₂·2CH₃OH] _n (3) (C₁₈H₁₆N₃O₂=2-acetylpyridine-d-tryptophan) were synthesized and characterized by elemental analysis, IR, UV, ¹H NMR and X-ray diffraction single crystal analysis. The analyses of the structures indicate that all three materials crystallize in the tetragonal crystal system, space group P4₁2₁2. They have similar structures; i.e., the Schiff base coordinates in its deprotonated form and behaves as a hexadentate (4N+2O) coordinated ligand to form a distorted octahedron geometry. On the other hand, as a result of the alternate arrangement of chains through N–H···O intermolecular hydrogen bonds interactions, 2-D layers are formed for the three complexes. Furthermore, the luminescent properties and thermal stabilities of the three complexes were investigated.     

Synthesis, Characterization and Biological Evaluation of Co(II), Cu(II), Ni(II) and Zn(II) Complexes With Cephradine

Some Co(II), Cu(II), Ni(II) and Zn(II) complexes of antibacterial drug cephradine have been prepared and characterized by their physical, spectral and analytical data. Cephradine acts as bidentate and the complexes have compositions, [M(L)(2)X(2)] where [M = Co(II), Ni(II) and Zn(II), L = cephradine and X = Cl(2)] showing octahedral geometry, and [M(L)(2)] where [M = Cu(II), L = cephradine] showing square planar geometry. In order to evaluate the effect of metal ions upon chelation, eephradine and its complexes have been screened for their antibacterial activity against bacterial strains, Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa.     

Synthesis and characterization of antibacterial polychelates of urea–formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions

We studied the reaction between urea and formaldehyde with the purpose of preparing new polychelates of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions. These compounds were characterized by elemental analysis, IR spectroscopy, ¹H‐NMR, electronic spectroscopy, thermogravimetric analysis (TGA), and molar conductance measurements. The percentage of metal in all of the polychelates was found to be consistent with 1:1.5 (metal/ligand) stoichiometry. The thermal behaviors of these coordination polymers were studied by TGA in a nitrogen atmosphere up to 750°C. The TGA results reveal that the complexes had higher thermal‐resistance properties compared to the common urea–formaldehyde resin. The molar conductivity and magnetic susceptibility measurements of the synthesized polychelates confirmed the geometry of the complexes. The antibacterial activity of the polychelates was also investigated with agar diffusion methods. The antibacterial activity of these polychelates was found to be reasonably good compared with standard drugs, namely, ciprofloxacin, ampicillin, and kanamycin. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 928–936, 2006     

Selective separation and concentration of Pd(II) from Fe(III), Co(II), Ni(II), and Cu(II) ions using thiourea‐formaldehyde resin

Thiourea‐formaldehyde (TUF), a well‐known chelating resin, has been synthesized and it was used in the adsorption, selective separation, and concentration of Pd(II) ions from Fe(III), Co(II) Ni(II), and Cu(II) base metal ions. The composition of the synthesized resin was determined by elemental analysis. The effect of initial acidity/pH and the adsorption capacity for Pd(II) ions were studied by batch technique. The adsorption and separation of Pd(II) were then examined by column technique. FTIR spectra and SEM/EDS analysis were also recorded before and after the adsorption of Pd(II). The optimum pH was found to be 4 for the adsorption. The adsorption data fitted well to the Langmuir isotherm. The maximum adsorption capacity of the TUF resin for Pd(II) ions was found to be 31.85 mg g⁻¹ (0.300 mmol g⁻¹). Chelating mechanism was effective in the adsorption. Pd(II) ions could be separated efficiently from Fe(III), Cu(II), Ni(II), and Co(II) ions using TUF resin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Conductometric studies of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates in N,N—dimethylacetamide solutions

Results are reported for the molar conductivities at 25°C of N,N—dimethylacetamide (DMA) solutions of Bu₄NBF₄ and Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) tetrafluoroborates. The limiting molar conductivities of [M(DMA)₆]²⁺ (M  MN, Co, Ni, Cu, Zn) and BF^?₄, as well as association constants for Co(BF₄)₂ in DMA solutions have been calculated. The slight differences between conductometric curves of different metal ions are discussed.     

A first report of the complexes of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarboxymethoxy-26,28-dihydroxycalix[4]arene with Mn(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II)

Totally six dinuclear complexes of Mn(II), Fe(III), Co(II), Ni(II), Cu(II) and Zn(II) of calix[4]arene derivatized with two pendants possessing terminal –COOH functions at two of its alternate phenolic –OH groups were synthesized for the first time and were well characterized.     

Thermal Studies of Zn(II), Cd(II) and Hg(II) Complexes of Some N-Alkyl-N-Phenyl-Dithiocarbamates

The thermal decomposition of Zn(II), Cd(II) and Hg(II) complexes of N-ethyl-N-phenyl and N-butyl-N-phenyl dithiocarbamates have been studied using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The products of the decomposition, at two different temperatures, were further characterized by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The results show that while the zinc and cadmium complexes undergo decomposition to form metal sulphides, and further undergo oxidation forming metal oxides as final products, the mercury complexes gave unstable volatiles as the final product.     

Adsorption of Cr(III), Ni(II), Zn(II), Co(II) ions onto phenolated wood resin

In this study, phenolated wood resin was used an adsorbent for the removal of Cr(III), Ni(II), Zn(II), Co(II) ions by adsorption from aqueous solution. The adsorption of metal ions from solution was carried at different contact times, concentrations and pHs at room temperature (25°C). For individual metal ion, the amount of metal ions adsorbed per unit weight of phenolated wood resin at equilibrium time increased with increasing concentration and pH. Also, when the amounts of metal ions adsorbed are compared to each other, it was seen that this increase was order of Cr(III) > Ni(II) > Zn(II) > Co(II). This increase was order of Cr(III) > Ni(II) > Co(II) > Zn(II) for commercial phenol–formaldehyde resin. Kinetic studies showed that the adsorption process obeyed the intraparticle diffusion model. It was also determined that adsorption isotherm followed Langmuir and Freundlich models. Adsorption isotherm obtained for commercial phenol–formaldehyde resin was consistent with Freundlich model well. Adsorption capacities from Langmuir isotherm for commercial phenol–formaldehyde resin were higher than those of phenolated wood resin, in the case of individual metal ions. Original adsorption isotherm demonstrated the monolayer coverage of the surface of phenolated wood resin. Adsorption kinetic followed the intraparticle diffusion model. The positive values of ΔG° determined using the equilibrium constants showed that the adsorption was not of spontaneous nature. It was seen that values of distribution coefficient (K_D) decreasing with metal ion concentration in solution at equilibrium (C_e) indicated that the occupation of active surface sites of adsorbent increased with metal ions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2838–2846, 2006     

Synthesis and properties of chelate polymers of VO(II), Mn(II), Zn(II), Fe(III), and Cr(III) with schiff base of 5,5′-methylene bis-salicylaldehyde with aniline

Polychelates of VO(II), Mn(II), Zn(II), Fe(III), and Cr(III) were prepared from Schiff base of 5,5′-methylene bis-salicyladehyde with aniline. All the chelate polymers are amorphous and insoluble in common organic solvents. They have very little solubility in DMF. The first three polychelates are found to be noncharged chelate polymers while the last two polychelates are found to be ionic from their conductivities in DMF. Their probable structures were determined from reflectance electronic spectral and magnetic measurements in conjunction with infrared measurements. The thermal stability, order of reaction and activation energy for all the polychelates were determined from their thermogravimetric analyses.     

A new method for the simultaneous determination of Fe(III), Cu(II), Pb(II), Zn(II), Cd(II), and Ni(II) in wine using differential pulse polarography

A new and simple differential pulse polarographic method for the analysis of wine has been established. With this method, it was possible to determine simultaneously six trace elements in wine. There was no need for time consuming extraction and separation procedures with danger of contamination. The polarogram of wet digested wine was taken initially in pH 2 acetate buffer and Pb, Cd, and Zn were determined by standard additions. Ethylene diamine tetraacetic acid (EDTA) was added and pH was increased to six by addition of NaOH. Fe and Cu were determined subsequently. The ammonia buffer, pH 9.5, was identified as the best medium for separation and determination of Ni and Zn. The quantities of trace elements were found as Cu 290 ± 20 μg L⁻¹, Fe 8960 ± 50 μg L⁻¹, Pb 148 ± 17 μg L⁻¹, Cd 16 ± 8 μg L⁻¹, Zn 460 ± 25 μg L⁻¹, and Ni 78 ± 17 μg L⁻¹.     

Search for Optimum Conditions of Extraction of Transition Metal Complexes with Alkylimidazoles. I. Extraction of the Co(II), Ni(II), and Zn(II) Complexes of 1-Methylimidazole and of the Co(II) and Zn(II) Complexes of 2-Methylimidazole

Abstract

It has been shown that for the Co(II), Zn(II), and Ni(II) complexes of 1-methylimidazole and for the Co(II) and Zn(II) complexes of 2-methylimidazole, the partition coefficient D between the aqueous and organic phases is proportional to the degree of formation α _n of a definite complex. Tetrahedral species have been found to be extracted with the Co(II) and Zn(II) complexes of 2-methylimidazole and with the Zn(II) complexes of 1-methylimidazole.     

Sorption of Cd(II), Co(II), and Zn(II) Complexes with MGDA on Anion Exchange Resins: A Study of the Influence of Various Parameters

The strongly basic polystyrene gel resins Amberjet 4200, Amberjet 4600, and the macroporous strongly basic polystyrene Purolite A 520E were investigated for their sorption properties towards Cd(II), Co(II), and Zn(II) complexes with MGDA. The object of the study was the sorption behavior of three metal ions on the above-mentioned anion exchangers, depending on the metal ions’ concentration, pH, contact time, and temperature. MGDA is an alternative, environmentally friendly complexing agent. The sorption data were fitted to the Langmuir and Freundlich models. Three different kinetic behaviors: pseudo first order, pseudo second order, and intraparticle diffusion were tested. The variations of thermodynamic functions were also calculated.     

Search for Optimum Conditions of Extraction of Transition Metal Complexes with Alkylimidazoles. II. Extraction of the Co(II), Ni(II), and Zn(II) Complexes of I-Ethylimidazole and I-Butylimidazole

Abstract

Extraction studies of the Co(II), Ni(II), and Zn(II) complexes of 1-ethyl-and 1-butylimidazole reveal correlations between magnitudes of the extraction process and α _n functions characterizing reactions of stepwise complex formation in aqueous solution. Further, the effect of alkyl substituents in the imidazole ring on extractability of successive complexes has been established. For each of the systems studied, the number of complexes passing to the organic phase has been determined, and appropriate distributicn constant values, P_n , have been calculated.     

Synthesis and thermal studies of poly(N‐acryloyl,N′‐cyanoacetohydrazide) complexes with Co(II), Fe(III), and UO2(II) ions

Polymer complexes with uranium, cobalt, and iron chlorides were synthesized and investigated by elemental analysis, electronic (uv–visible), IR vibration, and magnetic moment measurements. The thermal stabilities of N‐acryloyl,N′‐cyanoacetohydrazide (ACAH) homopolymers and polymer complexes of poly(ACAH) (PACAH) with metal chlorides were studied thermogravimetrically. The rates of polymerization of PACAH in the absence and presence of metal chlorides were studied. The activation energies of the degradation of the homopolymer and polymer complexes were calculated using the Arrhenius equation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3354–3358, 2003     

Synthesis, Characterization and Antiproliferative Activity of the Co(II), Ni(II), Cu(II), Pd(II) and Pt(II) Complexes of 2-(4-Thiazolyl)Benzimidazole (Thiabendazole)

Complexes of 2-(4-thiazolyi)benzimidazole (thiabendazole, THBD) with Co(II), Ni(II), Cu(ll) of general formula ML(2)(NO(3))(2) H(2)O and complexes of Pd(II) and Pt(II) of general formula ML2Cl(2) H(2)O have been obtained and characterized by elemental analyses, IR and far IR spectroscopy and magnetic measurements. The X-ray crystal structure of the copper(II) complex has been determined. The in vitro cell proliferation inhibitory activity of these compounds was examined against human cancer cell lines A 549 (lung carcinoma), HCV-29 T (urinary bladder carcinoma), MCF-7 (breast cancer), T47D (breast cancer), MES-SA (uterine carcinoma) and HL-60 (promyelocytic leukemia). Pt-THBD has been found to exhibit an antileukemic activity of the HL-60 line cells matching that of an arbitrary criterion.