Iron Chloride/4‐Acetamido‐TEMPO/Sodium Nitrite‐Catalyzed Aerobic Oxidation of Primary Alcohols to the Aldehydes

A variety of 4‐substituted 2,2,6,6‐tetramethylpiperidyl‐1‐oxy (TEMPO) derivatives has been screened for their ability in the oxidation of primary alcohols to the aldehydes with dioxygen under mild conditions. An evaluation of the efficiency of these 4‐substituted TEMPO derivatives in the alcohol oxidation may allow an insight into the effect of the structural variations of TEMPO on the oxidation of alcohols, which should facilitate catalyst design and screening efforts. Based on the screening results of 4‐substituted TEMPO derivatives, the catalyst comprised of 4‐acetamido‐TEMPO, iron chloride and sodium nitrite, has been developed for the highly efficient oxidation of a wide range of primary alcohols including primary aliphatic alcohols to the corresponding aldehydes under mild conditions.     

Hydroxylamine as a Source for Nitric Oxide in Metal‐Free 2,2,6,6‐ Tetramethylpiperidine N‐Oxyl Radical (TEMPO) Catalyzed Aerobic Oxidation of Alcohols

The communication reports on the metal‐free 2,2,6,6‐tetramethylpiperidine N‐oxyl radical (TEMPO) catalyzed aerobic oxidation of various alcohols to aldehydes and ketones. A novel catalyst system that uses 1–4 mol% of TEMPO in combination with 4–6 mol% of aqueous hydroxylamine is introduced. No other additives are necessary and corrosive by‐products are not formed during oxidation. Nitric oxide which is important for the catalytic cycle is generated in situ by reaction of the hydroxylamine with TEMPO. A catalytic cycle for the overall oxidation process is suggested.     

Practical TEMPO‐Mediated Oxidation of Alcohols using Different Polymer‐Bound Co‐Oxidants

Hypochlorite and chlorite exchange resins are evaluated as co‐oxidants or oxidants, respectively, for the oxidation of alcohols to the corresponding aldehydes, ketones or carboxylic acids. Polymer‐bound hypochlorite can act as a co‐oxidant in TEMPO‐mediated oxidations of alcohols. The formation of aldehydes only works under weakly acidic conditions. However, the cheap hypochlorite exchange resin is less efficient as co‐oxidant compared to the use of ionically immobilised bisacetoxybromate(I) anions. In contrast, the chlorite exchange resin is a highly potent co‐oxidant for the preparation of carboxylic acids from the corresponding primary alcohols in the presence of TEMPO. It is demonstrated that in this case also the resin acts as a polymer‐bound co‐oxidant for both oxidation steps. Yields are commonly excellent as is also demonstrated for examples taken from natural product synthesis which include acid labile glycosides. In most cases, work‐up of this heavy metal‐free oxidation is kept to a minimum. It often includes filtration followed by removal of the solvent.     

Expedient Immobilization of TEMPO by Copper‐Catalyzed Azide‐Alkyne [3+2]‐Cycloaddition onto Polystyrene Resin

TEMPO was readily grafted by copper(I)‐catalyzed azide‐alkyne cycloaddition onto polystyrene. Starting with commercially available Merrifield resin (4.3 mmol/ g) almost quantitative loading of TEMPO onto the polymer was achieved (≥ 4 mmol/ g). The so obtained PS‐CLICK‐TEMPO allowed the oxidation of alcohols to aldehydes with bleach or molecular oxygen as the terminal oxidant with high yields and selectivity in multiple cycles without loss of activity.     

Recyclable Carbon Supported Copper‐Manganese Oxide for Selective Aerobic Oxidation of Alcohols in Combination with 2,2,6,6‐Tetramethylpiperidyl‐1‐oxyl under Neutral Condition

Due to the promotion of the surface area and the dispersion of active components upon supporting mixed metal oxides on the porous material active carbon, the copper‐manganese oxide on carbon system has been proven to be much more efficient than the co‐precipitation prepared Cu‐Mn oxide in mediating the 2,2,6,6‐tetramethylpiperidyl‐1‐oxyl (TEMPO)‐catalyzed aerobic oxidation of alcohols. Even at 30 °C and with a 0.1 mol% load of TEMPO, the oxidations proceeded smoothly. Upon catalysis with the Cu‐Mn oxide/C (10 wt%) and TEMPO (0.5–5 mol%), various alcohols were oxidized selectively to the corresponding aldehydes or ketones with molecular oxygen at 80 °C. Such a stable, recyclable heterogeneous cocatalyst permits alcohols to be oxidized under neutral and mild conditions.     

Efficient and Selective Aerobic Alcohol Oxidation Catalyzed by Copper(II)/2,2,6,6,‐Tetramethylpiperidine‐1‐oxyl at Room Temperature

A simple and efficient copper(II)/2,2,6,6,‐tetramethylpiperidine‐1‐oxyl (TEMPO)‐catalyzed aerobic oxidation of both primary and secondary benzylic, allylic, and aliphatic alcohols to their corresponding aldehydes and ketones at room temperature using the copper(II) complex [Cu(μ‐Cl)(Cl)(phen)]₂ as the Cu(II) source is reported. The conversion of both electron‐rich and electron‐neutral benzyl alcohols is smooth and faster than those of electron‐deficient ones. The chemoselectivity of a primary benzyl alcohol over the secondary alcohol is also observed. Alcohols regarded as difficult substrates for oxidation due to their coordinating ability with transition metal catalyst such as 4‐(methylthio)benzyl alcohol and 3‐pyridinemethanol are also oxidized easily. In addition, a lignin model alcohol is oxidized to the corresponding aldehyde in excellent yield. Conversions of benzylic and allylic alcohols are faster as compared to those of aliphatic alcohols in accordance with their C_α H bond strengths. A plausible mechanism of the TEMPO‐based catalytic cycle is proposed.     

Activation of Dioxygen by Cobaloxime and Nitric Oxide for Efficient TEMPO‐Catalyzed Oxidation of Alcohols

The aerobic oxidation of alcohols to their corresponding carbonyl compounds could be efficiently accomplished by using the combination of cobalt nitrate, dimethylglyoxime and 2,2,6,6‐tetramethylpiperidine 1‐oxyl (TEMPO) as a novel catalytic system, and various alcohols including primary and secondary benzylic, allylic and aliphatic alcohols could be quantitatively converted to the corresponding aldehydes or ketones at 70 °C under 0.4 MPa dioxygen pressure in dichloromethane. During the oxidation, the in situ generated cobaloxime and nitric oxide (NO) were responsible for the activation of dioxygen, respectively, thereby, two concerted catalytic routes exist: cobaloxime‐activating‐dioxygen TEMPO‐catalyzed and NO‐activating‐dioxygen TEMPO‐catalyzed aerobic oxidation of alcohols.     

Nitroxyl Radical‐Mediated Oxidation of Alcohols in Continuous Microreactors

Primary and secondary alcohols are oxidized to corresponding aldehydes and ketones, respectively, with nitroxyl radicals. The stable radical 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) is used as a mediator for selective oxidation of anisyl alcohol to anisaldehyde. This reaction is operated in different continuous microreactors either in single‐phase or in multiphase applications like double emulsions. The latter are used for a simple separation of the hydrophilic coproduct 1‐hydroxy‐2,2,6,6‐tetramethylpiperidine (TEMPO‐H) and the lipophilic product anisaldehyde. In addition, cyclic voltammetry is applied to determine conditions and parameters for electrochemical recycling of TEMPO‐H. TEMPO‐H is reactivated in a continuous electrolysis cell by anodic oxidation for reuse as mediator.     

Antioxidant and prooxidant effects of α‐tocopherol in a linoleic acid‐copper(II)‐ascorbate system

The peroxidation of linoleic acid (LA) in the absence and presence of either Cu(II) ions alone or Cu(II)‐ascorbate combination was investigated in aerated and incubated emulsions at 37°C and pH 7. LA peroxidation induced by either copper(II) or copper(II)‐ascorbic acid system followed pseudo‐first order kinetics with respect to primary (hydroperoxides) and secondary (aldehydes‐ and ketones‐like) oxidation products, detected by ferric‐thiocyanate and TBARS tests, respectively. α‐Tocopherol showed both antioxidant and prooxidant effects depending on concentration and also on the simultaneous presence of Cu(II) and ascorbate. Copper(II)‐ascorbate combinations generally led to distinct antioxidant behavior at low concentrations of α‐tocopherol and slight prooxidant behavior at high concentrations of α‐tocopherol, probably associated with the recycling of tocopherol by ascorbate through reaction with tocopheroxyl radical, while the scavenging effect of α‐tocopherol on lipid peroxidation was maintained as long as ascorbate was present. On the other hand, in Cu(II) solutions without ascorbate, the antioxidant behavior of tocopherol required higher concentrations of this compound because there was no ascorbate to regenerate it. Practical applications: Linoleic acid (LA) peroxidation induced by either copper(II) or copper(II)‐ascorbic acid system followed pseudo‐first order kinetics with respect to primary (hydroperoxides) and secondary (e.g., aldehydes and ketones) oxidation products. α‐Tocopherol showed both antioxidant and prooxidant effects depending on concentration and also on the simultaneous presence of Cu(II) and ascorbate. The findings of this study are believed to be useful to better understand the actual role of α‐tocopherol in the preservation of heterogenous food samples such as lipid emulsions. Since α‐tocopherol (vitamin E) is considered to be physiologically the most important lipid‐soluble chain‐breaking antioxidant of human cell membranes, the results can be extended to in vivo protection of lipid oxidation.     

Novel 2,2,6,6‐Tetramethylpiperidine 1‐Oxyl–Iodobenzene Hybrid Catalyst for Oxidation of Primary Alcohols to Carboxylic Acids

Novel bifunctional hybrid‐type catalysts bearing 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) and iodobenzene moieties ( 1a and 1b ) were developed and used for the environmentally benign oxidation of primary alcohols to carboxylic acids. Reaction of primary alcohols 2 with a catalytic amount of 1 in the presence of peracetic acid as a co‐oxidant under mild conditions gave the corresponding carboxylic acids 3 in excellent yields.     

Iron Chloride‐Catalyzed Three‐Component Domino Sequences: Syntheses of Functionalized α‐Oxy‐N‐acylhemiaminals and α‐Oxyimides

The iron(III) chloride‐multicatalyzed dioxygenation of enamides with TEMPO in the presence of alcohols has been developed. This multicomponent domino process affords efficient new strategies for the synthesis of α‐oxy‐N‐acylhemiaminals or α‐oxyimides in good to excellent yields under mild conditions.

     

Anaerobic Palladium‐Catalyzed Chemoselective Oxidation of Allylic and Benzylic Alcohols with α‐Bromo Sulfoxide as a Co‐oxidant

A chemoselective palladium‐catalyzed anaerobic oxidation of allylic and benzylic alcohols using an α‐bromo sulfoxide as a co‐oxidant is described for the first time. The catalyst system is simple and has a long life because of the allowance of phosphane ligands under the non‐aerobic conditions. The advantages of the described method include no overoxidation of primary alcohols to carboxylic acids because of the mild conditions applied, the tolerance of oxygen‐sensitive functionalities such as a carbon‐carbon double bond, an organothio group, or a diorganoamino group and the effective preparation of α,β‐unsaturated aldehydes and ketones, resulting from the oxidation of primary and secondary allylic alcohols, since a competitive Heck reaction with the co‐oxidant does not occur.     

Polyurethane‐ and Polystyrene‐Supported 2,2,6,6‐Tetramethyl‐ piperidine‐1‐oxyl (TEMPO); Facile Preparation,Catalytic Oxidation and Application in a Membrane Reactor

In this contribution, the facile synthesis of two new polymer‐supported 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) catalysts and their application in the catalytic oxidation of alcohols to carbonyl compounds are described. For attachment of the TEMPO group to the polymer an isocyanate functionalized polymer is chosen. This new approach facilitates the synthesis in comparison with previously existing methods which generally require deprotonation of TEMPO prior to reaction with the polymer. Following this approach, polyurethane (PU)‐ and polystyrene (PS)‐based TEMPO catalysts are prepared in a one‐step reaction from commercially available compounds. Both polymer‐supported catalysts showed promising yields for a variety of substrates using inorganic and/or organic co‐oxidants in biphasic and/or monophasic systems. The recyclability of the corresponding catalysts was studied in repetitive batch experiments using filtration or distillation depending on the support type. Furthermore, application of the homogeneous polyurethane‐supported TEMPO for the selective oxidation of benzyl alcohol in a continously operated membrane reactor is demonstrated.     

Titanium‐Mediated Direct Carbon‐Carbon Double Bond Formation to α‐Trifluoromethyl Acids: A New Contribution to the Knoevenagel Reaction and a High‐Yielding and Stereoselective Synthesis of α‐Trifluoromethylacrylic Acids

An efficient strategy for a high‐yielding and stereoselective synthesis of α‐trifluoromethyl unsaturated carboxylic acids directly from the reactions of 3,3,3‐trifluoropropanoic acid (CF₃CH₂COOH) with various aryl aldehydes in the presence of titanium tetrachloride (TiCl₄) is reported here for the first time, which is a valuable expansion for the classical Knoevenagel reaction. Because these compounds may have potential applications in organic electronics and can be easily converted to the corresponding fluorinated alcohols and amino acids with excellent bioactivity, this route should be a good choice for the preparation of α‐trifluoromethyl‐containing derivatives.     

Selective Oxidation of Alcohols to Carbonyl Compounds Mediated by Fluorous‐Tagged TEMPO Radicals

Oxidation of primary, benzylic and secondary alcohols into their corresponding aldehydes and ketones with safe, inexpensive oxidants was achieved in good yields under mild conditions in the presence of catalytic amounts of 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) radicals bearing perfluoroalkyl substituents. These “fluorous‐tagged” TEMPOs were readily isolated from the reaction products by liquid‐liquid or solid‐phase extraction, considerably simplifying the purification step. Their recyclability was strongly influenced by the nature of the oxidizing system. The best results were obtained using either [bis(acetoxy)iodo]benzene (BAIB) or aqueous NaOCl as the primary oxidants. Fluorous TEMPO 10 could be reused up to six times in the BAIB oxidation of 1‐octanol with only minor loss of catalytic activity.     

Porous Silica Beads Supported TEMPO and Adsorbed NOx (PSB‐TEMPO/NOx): An Efficient Heterogeneous Catalytic System for the Oxidation of Alcohols under Mild Conditions

The combination of NO_x gas which is stored in the pore canals of porous silica beads (PSB) with a heterogeneous catalyst, PSB‐supported 2,2,6,6‐tetramethylpiperdine 1‐oxyl (PSB‐TEMPO, 1 ), afforded a highly efficient, widely applicable, and efficiently recyclable approach for the selective aerobic oxidation of alcohols. This novel catalytic system (PSB‐TEMPO/NO_x) can be employed in the oxidation of a wide range of alcohols to their corresponding aldehydes and ketones with selectivities as high as 99% at complete conversions under mild conditions. O₂ is the terminal oxidant. PSB‐TEMPO can be recycled for more than 10 times without significant loss of activity.     

Synthesis of γ‐Fluoro‐α, β‐unsaturated Carboxylic Esters from Saturated α‐Fluoro Aldehydes

γ‐Fluoro‐α, β‐unsaturated carboxylic esters 7a, 7b and 7d and 4‐fluoro‐4‐phenylbut‐3‐enoic ester ( 8 ) are obtained by two alternative pathways from 2‐fluoro aldehydes 5a—d , either by Horner—Wadsworth—Emmons reaction or by Wittig reaction. The aldehydes 5a—d are prepared by Swern oxidation of the corresponding fluorohydrins 4a—d . These are available from α‐olefins by bromofluorination, bromineby‐acetate replacement and subsequent hydrolysis.     

Aldehyde‐Catalyzed Transition Metal‐Free Dehydrative β‐Alkylation of Methyl Carbinols with Alcohols

Different to the borrowing hydrogen strategy in which alcohols were activated by transition metal‐catalyzed anaerobic dehydrogenation, the direct addition of aldehydes was found to be an effective but simpler way of alcohol activation that can lead to efficient and green aldehyde‐catalyzed transition metal‐free dehydrative C‐alkylation of methyl carbinols with alcohols. Mechanistic studies revealed that the reaction proceeds via in situ formation of ketones by Oppenauer oxidation of the methyl carbinols by external aldehydes, aldol condensation, and Meerwein–Ponndorf–Verley (MPV)‐type reduction of α,β‐unsatutated ketones by substrate alcohols, affording the useful long chain alcohols and generating aldehydes and ketones as the by‐products that will be recovered in the next condensation to finish the catalytic cycle.     

Palladium/Brønsted Acid‐Catalyzed α‐Allylation of Aldehydes with Allylic Alcohols

A simple, highly efficient, and readily scalable direct α‐allylation of aldehydes with allylic alcohols that is co‐catalyzed by palladium and a Brønsted acid has been developed.     

Tris(acetylacetonato)rhodium(III)‐Catalyzed α‐Alkylation of Ketones, β‐Alkylation of Secondary Alcohols and Alkylation of Amines with Primary Alcohols

The tris(acetylacetonato)rhodium(III) catalyst is shown to be a versatile catalyst in the presence of DABCO (1,4‐diazabicyclo[2.2.2]octane) as ligand for the α‐alkylation of ketones followed by transfer hydrogenation, for the one‐pot β‐alkylation of secondary alcohols with primary alcohols and for the alkylation of aromatic amines in the presence of an inorganic base in toluene.