Comparison between atmospheric and vacuum frying of apple slices

Vacuum deep-fat frying is a new technology that can be used to improve quality attributes of fried food because of the low temperatures employed and minimal exposure to oxygen. In this paper atmospheric and vacuum frying of apple slices were compared, in terms of oil uptake, moisture loss and color development. In addition, some apple slices were pre-dried (up to 64% w.b.) before vacuum frying to determine the overall effect. To carry out appropriate comparisons between both technologies equivalent thermal driving forces were used in both processes (ΔT = 40, 50, 60 °C), keeping a constant difference between the oil temperature and the boiling point of water at the working pressure. Vacuum frying was shown to be a promising technique that can be used to reduce oil content in fried apple slices while preserving the color of the product. Particularly, drying prior to vacuum frying was shown to give the best results. For instance, when using a driving force of ΔT = 60 °C, pre-dried vacuum fried slices absorbed less than 50% of the oil absorbed by atmospheric fried ones. Interestingly, a strong relationship between water loss and oil content was observed in both technologies, allowing the extension of observations that have been made for atmospheric frying.     

Effects of vacuum frying on structural changes of bananas

Effects of oil temperature, frying time, and ripeness on dimensional changes of vacuum fried bananas were studied. Banana slices with cross section diameters of 25-30 mm and a thickness of 3.5-4.5 mm were fried at temperatures of 100, 110, and 120 °C and 8 kPa for 20 min to determine which temperature produced the highest degree of expansion. Using this temperature, the width and thickness of the product were measured at 0, 5, 10, 15, and 20 min to model the dimensional changes as a function of moisture ratio. Sensory evaluation was conducted using a 7-point hedonic scale test to determine the effect of ripeness on acceptability of the product. Scanning electron microscopy (SEM) was used to analyze the structure of the vacuum fried bananas.The experimental results under this vacuum pressure revealed that frying temperature of 110 °C on bananas at the second day of ripeness yielded the highest volume expansion. Sensory evaluations did not unveil any significant difference (p > 0.05) in acceptability of the products based on ripeness. Results from SEM exhibited, as a function of frying time, a dramatic increase in the pore size of the bananas, while the Heywood shape factor indicated an overall increase in the product volume.     

Physico-chemical changes occurring in oil when atmospheric frying is combined with post-frying vacuum application

The aim of this study was to investigate the effect of atmospheric frying followed by drainage under vacuum on the stability of oil, compared to similar frying with drainage at atmospheric pressure. Changes in the oil were assessed by the free fatty acid (FFA) content, p-anisidine value (AnV), colour, viscosity, fatty acid profile and concentration of tocols. The rate of FFA formation in the case of vacuum drainage was found to be about half that of atmospheric drainage. Oil deterioration by oxidation and polymerisation was also reduced by the use of vacuum drainage. The AnV of the oil after vacuum drainage was lower by about 12%, the total colour difference was improved by 14% and viscosity was slightly reduced after 5 days of frying, compared to the values for oil that had been drained at atmospheric pressure. There was a reduction in the loss of polyunsaturated fatty acids in the case of vacuum drainage after 5 days of frying but differences in retention of tocols were only evident in the first two days of frying.     

Microstructural approach to understand oil absorption during vacuum and atmospheric frying

Crust microstructure plays a critical role in oil uptake of atmospheric fried food and seems to play an important role in vacuum fried products. The objective of this study was to understand the relationship between key microstructural parameters and oil absorption, after atmospheric and vacuum frying of different vegetable tissues. The effect of drainage and centrifugation in oil-uptake reduction was also analyzed. Key microstructural parameters were determined using gas adsorption at cryogenic temperatures, while oil location and surface roughness were studied using confocal laser scanning microscopy and area-scale fractal analysis, respectively. Overall, we found a linear relationship between porosity and final oil content in vacuum and atmospheric fried chips. However, this relationship could not be extended when analyzing the whole set of data, since oil absorption was significantly higher in atmospheric fried chips. Centrifugation allowed reducing oil-uptake up to 73% in atmospheric fried chips and up to 64% in vacuum fried ones.     

真空油炸过程中干燥特性和产品品质变化的研究

研究了胡萝卜脆片真空油炸过程中干燥特性和产品品质的变化,结果表明:真空油炸过程属于传统的降速干燥过程,其水分和脂肪的变化符合一级反应动力学规律,利用非线性回归法求解得到了胡萝卜脆片水分和脂肪含量、干燥速率随油炸时间变化的方程;随着油炸时间的延长,胡萝卜脆片直径不断减小,厚度不断增加,油炸20min后,其直径和厚度皱缩度分别达到6%和4.5%;真空油炸胡萝卜脆片气孔数量不断增加,细胞结构变形程度增强。真空油炸过程中胡萝卜脆片脂肪主要分布于脆片的表面,冷却过程中脂肪逐渐向中心渗透,中心脂肪含量可达到60%。     

Modeling water loss and oil uptake during vacuum frying of pre-treated potato slices

The objective of this research was to determine the kinetics of water loss and oil uptake during frying of pre-treated potato slices under vacuum and atmospheric pressure. Potato slices (diameter: 30 mm; width: 3 mm) were pre-treated in the following ways: (i) raw potato slices “control”; (ii) control slices were blanched in hot water at 85 °C for 3.5 min; (iii) blanched slices were dried in hot air until reaching a moisture content of ∼0.6 g water/g dry basis. The slices were fried under vacuum (5.37 kPa, absolute pressure, at 120, 130 and 140 °C) and atmospheric conditions (at 180 °C). Two models based on the Fick's law were used to describe water loss: (i) with a constant effective diffusive coefficient; and (ii) with a variable effective diffusive coefficient. Oil uptake data were fitted to an empirical model, with a linear behavior for short times whereas the model was time independent for long times. The variable diffusivity model better fitted experimental water loss, giving values of effective diffusivity between 4.73 × 10⁻⁹ and 1.80 × 10⁻⁸ m²/s. The proposed model for the study of the kinetics of oil uptake fitted the experimental data properly. Control and blanched vacuum fried potato chips increased their final oil contents to 57.1% and 75.4% respectively, when compared with those fried at atmospheric pressure. However, the oil absorption of dried vacuum fried potato chips diminished by ∼30%.     

Comparative study of physical and sensory properties of pre-treated potato slices during vacuum and atmospheric frying

The objective of this research was to study the effect of different processing conditions on physical and sensory properties of potato chips. Potato slices of Desirée and Panda varieties (diameter: 30 mm; thickness: 3 mm) were pre-treated in the following ways: (i) control or unblanched slices without pre-drying; (ii) blanched slices in hot water at 85 °C for 3.5 min and air-dried at 60 °C until a final moisture content of ∼0.6 kg water/kg dry solid; (iii) control slices soaked in a 3.5 kg/m³ sodium metabisulphite solution at 20 °C for 3 min and pH adjusted to 3. Pre-treated slices were fried at 120 and 140 °C under vacuum conditions (5.37 kPa, absolute pressure) and under atmospheric pressure until they reached a final moisture content of ∼1.8 kg water/100 kg (wet basis). An experimental design (3 × 2³) was used to analyze the effect of pre-treatment, potato variety, type of frying and frying temperature over the following responses: oil content, instrumental color and texture and sensory evaluation. Vacuum frying increased significantly (p < 0.05) oil content and decreased instrumental color and textural parameters. Sensory attributes, flavor quality and overall quality, were significantly improved using vacuum frying. The higher frying temperature (140 °C) increased ΔE, maximum breaking force, hardness and crispness and decreased L^* and b^* values. On the other hand, Panda potato variety improved the color of the product. A great improvement on color parameters was obtained using sulphited potato slices instead of the other pre-treatments. Although, the better flavor was obtained for control potato chips, no significant differences were found for overall quality between control and sulphited potato chips. Significant correlations (p < 0.01) between sensory and instrumental responses were found.     

Influence of temperature on heat transfer coefficient during moderate vacuum deep-fat frying

The objective of this study is to analyze the influence of temperature and reduced pressure on the convective heat transfer coefficient, h, during frying of products with different area/volume ratio. h was determined from surface temperature and moisture loss experimental data during frying of potato cylinders and “churros”, at different oil temperatures (100, 120 and 140 °C) and moderate vacuum (19.5–25.9 kPa). The results obtained during vacuum frying were compared with those obtained at atmospheric pressure, both for the same oil temperature (140 °C) and for the same thermal gradient (40 °C). During frying, h changes considerably, reaching a maximum between 700–1600 Wm⁻² K⁻¹ in vacuum frying and 800–2000 Wm⁻² K⁻¹ in atmospheric frying. To quantify the effect of oil temperature, pressure and size of the product on h, a parameter called “bubbling efficiency”, BE, was defined. BE relates the bubble departure radius and the area/volume ratio of the product. An equation (the derivative of the Gompertz function) was proposed to estimate the mean heat convective coefficients for each frying condition as a function of BE (R² = 0.957). The relation between h and BE shows a maximum corresponding to an optimal bubbling pattern. Most of the vacuum frying settings are outside this optimum, being affected by the insulation effect of bubbles covering the surface.     

Phenolic compounds and abscisic acid as potential markers for the floral origin of two Polish unifloral honeys

The phenolic profiles of Polish honey samples from heather (Calluna vulgaris L.) and buckwheat (Fagopyrum esculentum L.) were determined. The phenolic components were isolated from honey samples using Amberlite-XAD-2 as a solid-phase extraction sorbent. For the determination of the composition of the honey extracts HPLC with photodiode array detector was applied. Identification and quantification of phenolics was performed by comparison of their retention times and UV spectra with those of standard solutions of pure reference substances and by using those references as external standards. From among 20 commercially available standards over 15 of them were identified as present in all analysed samples. Taking into account the samples of the same unifloral honeys, similar qualitative but slightly quantitatively different phenolic characteristic profiles were observed. These profiles might be considered as “fingerprints” of heather and buckwheat honeys.     

Phenolic fortification of yogurt using grape and callus extracts

In this study, acidified ethanol extracts of four different grape varieties (Cabernet sauvignon, Chardonnay, Shyrah, and Merlot) and grape callus were supplemented into yogurt as functional ingredients. The total phenolic substances, total anthocyanin content, and antioxidant activity of the yogurts were measured using chemical analyses. Yogurts inoculated with red grape and callus extracts displayed high phenolic - anthocyanin content and thus exhibited higher antioxidant power compared to yogurts containing chardonnay extracts and control samples. The storage time significantly affected the free radical scavenging capacity of the yogurts. The yogurts supplied with grape callus extract displayed the greatest antioxidant power on the first day of storage compared to all the assayed samples. The Gas Chromatography (GC) analysis revealed the presence of at least 10 individual bioactive phenolic compounds in the callus yogurt. The results obtained from this investigation shows that grape callus culture has a potential to be used as a food supplement to play a role in reducing the risk of developing chronic diseases such as cancer and cardiovascular disease.     

Phenolic compounds and antioxidant activity of seed and skin extracts of red grape (Vitis vinifera and Vitis labrusca) pomace from Brazilian winemaking

The phenolic compounds content and antioxidant activity of seed and skin of pomace from the vinification of grape varieties widely produced in Brazil were investigated with a view to their exploitation as a potential source of natural antioxidants. There was a greater concentration of phenolic compounds in the seeds (2128 to 16,518 mg of catechin equivalents (CE)/100 g) than in the skins (660 to 1839 mg CE/100 g). The highest antioxidant activity values determined as DPPH radical-scavenging ability and ferric reducing-antioxidant power (FRAP) were found for the seeds of the Pinot Noir variety (16,925 ??mol Trolox equivalents (TE)/100 g and 21,492 ??mol Fe²⁺/100 g, respectively) and in the skin extracts of the Isabel variety (3640 ??mol TE/100 g and 4362 ??mol Fe²⁺/100 g, respectively). The skin of Cabernet Sauvignon and Primitivo varieties had the highest contents of anthocyanins (935 and 832 mg/100 g, respectively). The grape seed extracts were rich in oligomeric and polymeric flavanols. The data suggested that grape seed and skin extracts may be exploited as antioxidant agents.     

Phenolic compounds and fatty acids in different parts of Vitis labrusca and V. vinifera grapes

trans-Resveratrol, antioxidant activity, phenolic compounds, proximate composition, and fatty-acid composition were quantified in different parts (peel, pulp, and seeds) of four grape varieties: Brazil (Vitis vinifera), Benitaka (V. vinifera), Isabel (Vitis labrusca) and Niagara (V. labrusca). Large concentrations of polyunsaturated fatty acid (18.84 and 9204.27 mg 100 g^− 1), linoleic acid (LA, 18:2n-6), from 5890.87 to 9148.93 mg 100 g^− 1, and alpha-linolenic (LNA, 18:3n-3), from 5.25 to 56.85 mg 100 g^− 1, were found in different parts of the four grape varieties. The lowest concentrations necessary for 50% inhibition of DPPH were (9.26 to 126.91 ??g mL^− 1) in seeds; the pulp did not have antioxidant activity. The total phenolic content varied between 0.04 and 122.35 mg EAG g^− 1; seeds had the highest concentrations (89.83 to 122.35 mg EAG g^− 1), especially in Niagara and Isabel varieties. trans-Resveratrol was detected in peels (1.17 to 12.96 ??g g^− 1) and seeds (2.03 to 2.44 ??g g^− 1) of the four varieties; however, it was absent in the pulp.     

Phenolic compounds content and antioxidant activity in pomace from selected red grapes (Vitis vinifera L. and Vitis labrusca L.) widely produced in Brazil

The phenolic compounds content and antioxidant activity of pomace from the vinification of grape varieties widely produced in Brazil (Cabernet Sauvignon, Merlot, Bordeaux and Isabel) were investigated with a view to their exploitation as a potential source of natural antioxidants. Cabernet Sauvignon grape pomace was found to have the highest content of total phenolic compounds (74.75 mg gallic acid equivalent (GAE)/g), the highest antioxidant activity (determined using the 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging methods; 485.42 and 505.52 μMol Trolox equivalent antioxidant capacity (TEAC)/g, respectively), and the highest reducing power (determined using the FRAP method; 249.46 μMol TEAC/g). The Bordeaux variety showed the highest oxidation inhibition power (41.13%), determined using the β-carotene/linoleic acid method and the highest content of total anthocyanins (HPLC; 29.17 mg/g). Catechin was the most abundant non-anthocyanic compound identified in the grape pomace (150.16 mg/100 g) for all varieties. In this study, pomaces of the red wine vinification of Cabernet Sauvignon and Bordeaux varieties showed the highest potential as a source of antioxidant compounds and natural colourants, respectively.     

油炸过程中煎炸油和鸡肉串的品质变化及其相关性研究

研究油炸过程中煎炸油和鸡肉串的酸价(acid value,AV)、过氧化值(Peroxide value,POV)和硫代巴比妥酸值(thiobarbituric acid value,TBA)的变化及其相关性。结果表明:煎炸油和鸡肉串的酸价均随煎炸时间的延长而增大,过氧化值先上升后下降,TBA值呈现升降交替变化现象;煎炸油的酸价与鸡肉串的酸价呈极显著的正相关,与过氧化值呈显著的正相关,与TBA值无显著相关;煎炸油的过氧化值与鸡肉串的过氧化值呈极显著的正相关,与TBA值呈显著的正相关;煎炸油的TBA值与鸡肉串品质指标的相关性不显著。      

食物油炸过程中挥发性成分研究进展

油炸食品的特有风味与食物油炸过程中产生的挥发性成分有关。由于具有较强的挥发性和复杂性,这类物质的鉴定需要有效的气体收集方式和检测分析手段。本文介绍了挥发性成分的常用收集方法、检测技术和安全性分析等,论述了煎炸油直接加热、食物油炸模拟过程和实际食物油炸过程挥发性成分生成情况的研究进展,旨在为食物油炸安全性的提高、煎炸油脂使用期限的评价、油炸食品品质和安全性的改善提供新的研究思路。     

Phenolic composition of Flacourtia indica, Opuntia megacantha and Sclerocarya birrea

The phenolic acid composition of the peel and pulp of the fruits of Flacourtia indica (Burm. f.) Merr., Opuntia megacantha (L.) Mill and Sclerocarya birrea (A. Rich.) Hochst., from Zimbabwe, were analysed using traditional colorimetric as well as HPLC methods. The total phenolics, flavanoids and condensed tannin levels varied with species. Sclerocarya birrea pulp had the highest total phenolics, flavanoids and condensed tannins, i.e., 2262 μg GAE/g, 202 μg catechin/g and 6.0% condensed tannins, respectively. Flacourtia indica pulp contained the least total phenolics, flavanoids and condensed tannins 334 μg GAE/g, 41 μg catechin/g and 1.4%, respectively. There were no significant differences in the total phenolics between the peels and the pulps of the individual fruits. However, significant differences were noted in the flavanoids and the condensed tannins between the peels and pulps of the fruits assayed. Ferulic acid, caffeic acid and vanillic acid were the dominant phenolic acids in the three fruits. There were differences between the phenolic acids in the peels and the pulps of the fruits.     

Physical and thermal properties of potato chips during vacuum frying

Vacuum frying (1.33 kPa), with the aid of a de-oiling mechanism, was used to produce low-fat potato chips.The kinetics of oil absorption and oil distribution in the potato chips was studied so that effectiveness of the de-oiling system could be established. Non-linear regression was used to fit the experimental data to the models used to describe oil absorption in potato chips with time.Moisture content, oil content, microstructure, diameter and thickness expansion, bulk density, true density, and porosity of chips fried at different temperatures (120, 130, and 140 °C) was performed to evaluate the effect of process temperature on the product. The convective heat transfer coefficient at the oil-chip interface was determined for the same temperature range.The final oil content of the potato chips was 0.072 ± 0.004, 0.062 ± 0.003, and 0.059 ± 0.003 g/g solid for frying temperatures of 120, 130, and 140 °C, respectively. These values are lower (80-87% less) than those found in the not de-oiled potato chips, which indicates that the de-oiling mechanism is crucial in vacuum frying processing. A significant difference (P < 0.05) was observed in oil content and oil distribution within temperatures. The rate of change in product quality attributes was greatly affected by temperature; however, the final values of moisture content, bulk density, true density, porosity, diameter shrinkage, and thickness expansion were not affected by temperature.During vacuum frying, the convective heat transfer coefficient changed considerably as frying progressed; moreover, it increased with temperature reaching a maximum between 2200 and 2650 W/m² K depending on frying temperature.