Response surface modeling for optimization of formulation variables and physical stability assessment of walnut oil-in-water beverage emulsions

The effect of Arabic gum content (5-10% w/w) and walnut-oil concentration (3-6% w/w) on properties of prepared walnut oil/water emulsion, including turbidity loss rate, density, size index, particle size and stability, was investigated using response surface methodology (RSM). For each response, a second-order polynomial model with high coefficient of determination (R²) values ranging from 0.907 to 0.989 was developed using multiple linear regression analysis. The lack of significant difference between the experimental and predicted values proved the adequacy of response surface equations for describing the physical changes of emulsions. An increase of Arabic gum content in range and initial concentration of walnut oil were associated with high emulsion stability and minimum droplet size. It can be concluded that RSM can determine the most suitable formulation (3% w/w walnut oil and 9.62% w/w Arabic gum) to achieve the highest stability in a developed beverage emulsion based on walnut oil.     

Rheological behavior and stability of d-limonene emulsions made by a novel hydrocolloid (Angum gum) compared with Arabic gum

Our goal was to evaluate emulsion stability, droplet size analysis and rheological behavior of the emulsions prepared by a native biopolymer namely Angum gum (An) compared with Arabic gum (Ar) stabilized emulsions. After gum extraction, gum dispersions with maltodextrin were prepared in water (in 1-5% concentrations) and emulsified with 5% and 10% d-limonene using high pressure homogenization. Statistical analysis revealed a significant influence of gum type and gum concentration on emulsion stability at α = 0.05. Flavor level was not important statistically in emulsion stability but it was the only factor with a significant influence (P < 0.05) on surface tension of the emulsions. The results showed that Angum gum was superior to Arabic gum in stabilizing emulsions during storage. Also, rheological data revealed that Angum gum-emulsions’ behavior was following the Herschel-Bulkley model with higher viscosities compared to Arabic gum emulsions, which could be the main reason of higher emulsion stabilities with this novel hydrocolloid.     

Effect of Arabic gum,xanthan gum and orange oil on flavor release from diluted orange beverage emulsion

The influence of main emulsion components namely Arabic gum (13–20% w/w), xanthan gum (0.3–0.20% w/w) and orange oil (10–14% w/w) on semi-quantitative headspace analysis of target volatile flavor compounds released from a model orange beverage (diluted orange beverage emulsion) was evaluated by using a three-factor circumscribed central composite design (CCCD). For optimization procedure, the peak area of 13 volatile flavor compounds (i.e. ethyl acetate, α-pinene, ethyl butyrate, β-pinene, 3-carene, myrcene, limonene, γ-terpinene, octanal, decanal, linalool, neral and geranial) were considered as response variables. The response surface analysis exhibited that the significant (p < 0.05) second-order polynomial regression equations were successfully fitted for all response variables except for ethyl butyrate. A satisfactory coefficient of determination (R²) ranged from 0.831 to 0.969 (>0.8) was obtained for the response variables studied. No significant (p > 0.05) lack of fit was indicated for the reduced models except for the models fitted for limonene and linalool. This observation confirmed an accurate fitness of the reduced response surface models to the experimental data. The multiple response optimizations indicated that an orange beverage emulsion containing 15.87% (w/w) Arabic gum, 0.5% (w/w) xanthan gum and 10% (w/w) orange oil was predicted to provide the minimum overall flavor release.     

Optimisation of serine protease extraction from mango peel (Mangifera Indica Cv. Chokanan)

This study investigated the possible relationship between the enzyme extraction variables, namely amount of buffer (25–75 ml, X₁), temperature (−20, 25 °C, X₂) and mixing time (1–3 min, X₃) on total protein (Y₁), total activity (Y₂), specific activity (Y₃), storage stability (Y₄), temperature stability (Y₅) and pH stability (Y₆) of serine protease from mango peel. It was found that there was significant (p < 0.05) fit of the response surface models for all the response variables investigated. There was indication of high coefficient of determination (R²) values (between 0.954 and 1.000) in the regression models describing variations of the response variables. It was found that there was no significant (p > 0.05) difference between the experimental and predicted values. This ensured that the response surface models used to indicate property changes of serine protease as a function of enzyme extraction conditions were sufficient.     

Optimisation of the solvent extraction of bioactive compounds from Parkia speciosa pod using response surface methodology

Central composite design was employed to optimise the buffer-to-solids ratio (X₁: 20–50 ml/g), incubation temperature (X₂: 35–55 °C) and time (X₃: 100–200 min), obtaining extracts from Parkia speciosa pod with high total phenolic and flavonoid contents and high antioxidant activities. Analysis of variance showed that the contribution of a quadratic model was significant for the responses. An optimisation study using response surface methodology was performed and 3D response surfaces were plotted from the mathematical models. The optimal conditions based on combination responses were: X₁ = 20 ml/g, X₂ = 35–36 °C and X₃ = 100–102 min. These optimum conditions yielded total phenolic contents of 664–668 mg gallic acid equivalents/100 g, total flavonoid contents of 47.4–49.6 mg pyrocatechol equivalents/100 g, %DPPH_sc of 81.2–82.1%, %ABTS_sc of 78.2–79.8% and FRAP values of 3.2–3.3 mM. Close agreement between experimental and predicted values was found. This methodology could be applied in the extraction of bioactive compounds in the natural product industry.     

Parameter optimization for spray-drying microencapsulation of jaboticaba (Myrciaria jaboticaba) peel extracts using simultaneous analysis of responses

The present study aimed to conduct a simultaneous optimization of different carrier agents and temperatures for the production of jaboticaba extracts by spray-drying microencapsulation. The 30% maltodextrin (control), 25% arabic gum + 5% maltodextrin and 25% Capsul™ + 5% maltodextrin carriers were used at air-drying inlet temperatures of 140, 160 and 180 °C. The following responses were evaluated: anthocyanin retention (AR), moisture content (MC), total solids (TS), hygroscopicity (H), overall color difference and antioxidant activity. Scanning electron microscopy (SEM) analysis was also performed. The AR, MC, H and overall color difference parameters were selected for simultaneous optimization by the desirability approach. The results showed that the highest desirability (0.7–0.8) was achieved when 30% maltodextrin was used at 180 °C. According to the SEM analysis, the use of maltodextrin and gum arabic allowed for the formation of more homogeneous particles, which is recommended in spray-drying microencapsulation.     

Rheological properties of Cedrela odorata gum exudate aqueous dispersions

Rheological studies of Cedrela odorata gum aqueous dispersions demonstrated viscoelastic properties. Mechanical spectra derived from small amplitude oscillatory shear (SAOS) results support the onset of gel-like structure at given conditions (10% w/v, 20 °C). The increase in the storage and loss moduli, along with the drop in their frequency dependence, observed at higher gum concentrations, indicates a slower relaxation mechanism, which may be related to the increasing number and structural complexity of transient junction zones among macromolecules. The transition from gel-like to sol-like structure, at higher temperature, was detected from SAOS results. The flow behaviour of the aqueous gum dispersions under steady shear is highly non-Newtonian and can be modelled by the Sisko equation. The Cox–Merz rule was found to fail at critical gum concentration for the onset of gel-like behaviour and also at a temperature slightly above the gel–sol transition. C. odorata gum aqueous dispersions may have interesting applications as stabilisers of emulsions and suspensions on account of their rheological behaviour.     

In vitro retardation of glucose diffusion with gum extracted from malva nut seeds produced in Thailand

Mucilage of malva nut fruit has been used as traditional medicine in Thailand. Our laboratory has succeeded in extracting malva nut gum (MNG) from malva nut seeds by using alkaline-extraction method. The extract had higher gelling properties compared to water-extracted MNG. This research was aimed to investigate the effect of MNG on the retardation of glucose diffusion in in vitro dialysis processes. The results showed that alkaline-extracted MNG significantly (p < 0.05) reduced glucose content in dialysate compared to control containing no dietary fibre. MNG at 1% (w/w) concentration was more effective than that of 0.5% (w/w) concentration. The mixture of MNG and guar gum significantly (p < 0.05) reduced glucose in dialysate by 50–82% compared to that of control. In starch digestion process, the mixture of MNG and guar gum showed greater reduction of glucose (3–7 folds) in dialysate at 15–30 min.     

Steady shear flow properties of wild sage (Salvia macrosiphon) seed gum as a function of concentration and temperature

The steady shear flow properties of dispersions of a new potential hydrocolloid, sage seed gum (SSG), were determined as a function of concentration (0.5–2% w/w), and temperature (20–50 °C). SSG dispersions exhibited strong shear-thinning behavior at all conditions tested, which was even more pronounced than commercial hydrocolloids like xanthan, guar gum and locust bean gum. Different time-independent rheological models were used to fit the experimental data, although the Herschel–Bulkley model (H–B) was found the best model to describe steady shear flow behavior of SSG. An increase in gum concentration led to a large increase in yield stress and consistency coefficient values, whereas there was no definite trend with an increase in temperature. On the other hand, the above-mentioned increases in concentration and temperature did not yield a clear evolution of the shear-thinning characteristics of SSG dispersions. An Arrhenius-type model was also used to describe the effect of temperature. The activation energy (E_a) appeared in the range of 3949–16384 J/mol, as concentration increased from 0.5 to 2%, at a shear rate of 100 s⁻¹. The yield stress values estimated by viscoplastic rheological models were much higher than the data determined by stress ramp method. Apparent viscosity of SSG surpassed many commercial hydrocolloids such as guar gum, locust bean gum, Tara gum, fenugreek gum and konjac gum at the same conditions, which suggest it as a very good stabilizer in food formulations.     

Isolation and characterization of galactomannan from Dimorphandra gardneriana Tul. seeds as a potential guar gum substitute

A galactomannan was obtained from mature seeds of Dimorphandra gardneriana Tul., the plant from which rutin is extracted. The galactomannan extraction was based on manual separation of the endosperm, water dissolution, centrifugation and precipitation with ethanol. The galactomannan yield obtained (31%) was similar to values reported for other Brazilian seeds and to that of guar gum. The polysaccharide from D. gardneriana seeds (GalDG) was characterized by gas–liquid chromatography (GLC), gel permeation chromatography (GPC), rheology and also by ¹³C and ¹H nuclear magnetic resonance (NMR). The monosaccharide composition in weight % was mannose 64.2, galactose 34.7 and glucose 1.1. Small amounts of protein and uronic acid were found, values being 1.75 and 2.8% (w/w), respectively. The mannose/galactose ratio of GalDG (1.84) is similar to values reported for galactomannans extracted from other Brazilian seeds, and is the M/G value closest to that of guar gum (1.6–1.8). The intrinsic viscosity of galactomannan from D. gardneriana (8.7 dL/g), in water at 25 °C, is lower than the [η] value of guar gum, but the absolute viscosity of the GalDG in aqueous solution at concentrations of 0.1 and 1% (w/v) is higher. The aqueous solution at 1% (w/v) behaves as a pseudoplastic fluid, but a Newtonian behavior was noted for the solution at 0.1%. The high average molar masses, M_w of 3.9 × 10⁷ g/mol and M_n of 1.9 × 10⁷ g/mol, determined by GPC are probably due to molecular aggregation. ¹³C and ¹H NMR spectra (DEPT 135 and HSQC) of GalDG solutions in D₂O were recorded. The patterns of mannose substitution in GalDG and guar gum are similar.     

Effects of spray drying conditions on the physicochemical and antioxidant properties of the Gac (Momordica cochinchinensis) fruit aril powder

Gac fruit aril has an attractive orange red colour and very high level of carotenoids, giving it exceptional antioxidant properties. However, spray drying of this material has not been successful and malto dextrin is considered as a suitable drying aid to preserve its colour and antioxidant properties. This paper reports the effects of inlet drying air temperature (120, 140, 160, 180 and 200 °C) and maltodextrin addition (10%, 20% and 30%) on the physicochemical and antioxidant properties of the Gac aril powder. Moisture content and bulk density, colour characteristics, total carotenoid content (TCC), encapsulation efficiency and total antioxidant activity (TAA) were significantly affected by maltodextrin concentration and the inlet air temperatures. However, pH, a_w and water solubility index were not significantly influenced by the spray drying conditions. Overall, a good quality Gac powder in terms of colour, TCC and TAA can be produced by spray-drying at inlet temperature of 120 °C and adding maltodextrin concentration at 10% w/v.     

Both stereo-isomers of glucose enhance the survival rate of microencapsulated Lactobacillus rhamnosus GG during storage in the dry state

This study investigates the protective effects of a metabolizable and a non-metabolizable stereoisomer of glucose on encapsulated Lactobacillus rhamnosus GG (LGG) bacteria in the dry state. Separate experiments confirmed that the probiotic strain metabolizes only d-glucose. Encapsulated LGG formulations (2 wt.% LGG, dry basis) were prepared by freeze drying a mixture of the freshly cultured bacteria within various whey protein–carbohydrate matrices. The encapsulant matrices used were (i) a 1:2 mixture of protein:maltodextrin, (ii) a 1:1:1 mixture of protein:maltodextrin:d-glucose and (iii) a 1:1:1 mixture of protein:maltodextrin:l-glucose. The partial substitution of maltodextrin with either d-glucose or l-glucose in the encapsulant matrix significantly enhanced the survival of LGG powders stored at a relative humidity of 33% RH and 25 °C over 35 days. In comparison, there was a protective effect afforded by partial substitution of maltodextrin with either stereoisomer of glucose during storage of LGG powders at relative humidity of 70% RH and 25 °C over 7 days only. However, on longer term storage at relative humidity of 70% RH and 25 °C over 14–35 days, the viability of LGG was similar for all formulations. The results suggest that the protection afforded to LGG by the incorporation of d-glucose or l-glucose in the encapsulant matrix was primarily due to the physico-chemical effect of the glucose molecules rather than d-glucose being a metabolizable sugar. These experiments allowed discrimination between the physico-chemical and nutritional roles of glucose on LGG viability.     

Response surface methodology and multivariate analysis of equilibrium headspace concentration of orange beverage emulsion as function of emulsion composition and structure

The influence of emulsion composition (i.e. Arabic gum, xanthan gum and, orange oil) and structural emulsion properties (i.e. average droplet size and apparent viscosity) on equilibrium headspace concentration of beverage emulsions was investigated. Increase in average droplet size led to increase the equilibrium headspace concentration of more hydrophilic volatile compounds (i.e. lower log P) such as ethyl acetate and octanal, but decrease in more hydrophobic volatile compounds such as 3-carene, myrcene and limonene. In most cases, apparent viscosity had significant positive effect on equilibrium headspace concentration. Principle component analysis (PCA) score discriminated the beverage emulsions containing the same orange oil content but different contents of emulsifiers in different classes, thus indicating the significant (p < 0.05) effect of emulsifier fraction on equilibrium headspace concentration. Beverage emulsion containing 22.2% (w/w) Arabic gum, 0.52% (w/w) xanthan gum and 14.21% (w/w) orange oil was estimated to provide the highest equilibrium headspace concentration.     

Analysis of ginsenosides in Panax ginseng in high pressure microwave-assisted extraction

High pressure microwave assisted extraction (HPMAE) was applied to extract the ginsenosides from Panax ginseng root. The influences of extraction solvent, extraction pressure and extraction time were individually investigated. HPMAE has been compared with other extraction methods, including Soxhlet extraction, ultrasound-assisted extraction and heat reflux extraction. The determination of ginsenosides was performed by HPLC–ESI-MS. The results indicated that the HPMAE not only took a shorter time but also afforded higher extraction yields of ginsenosides, especially ginsenoside Rb₁, Rc, Rb₂ and Rd. Furthermore, the neutral ginsenosides and malonyl ginsenosides in Panax ginseng root extracts by HPMAE were investigated. The malonyl ginsenoside m-Rb₁, m-Rc, m-Rb₂ and m-Rd degraded in HPMAE at 400 kPa (109–112 °C) in 70% (v/v) ethanol–water and at 600 kPa (112–115 °C) in methanol, and transformed into corresponding neutral ginsenoside Rb₁, Rc, Rb₂ and Rd. Using water as extraction solution, the neutral ginsenosides degraded under HPMAE at 400 kPa (135–140 °C), and transformed into less polarity rare ginsenosides.     

Response surface optimisation for the extraction of phenolic compounds and antioxidant capacities of underutilised Mangifera pajang Kosterm. peels

The optimum extraction conditions for highest recovery of total phenolics content (TPC) and antioxidant capacities (AC) were analysed for Mangifera pajang peels (MPP), using response surface methodology. The effects of ethanol concentration (X₁: 20–80%), extraction temperature (X₂: 30–65 °C) and liquid-to-solid ratio (X₃: 20–50 mL/g) on the recovery of total phenolics (Y₁) and antioxidant capacity (Y₂) were investigated. A second order polynomial model produced a satisfactory fitting of the experimental data with regard to total phenolic content (R² = 0.9966, p < 0.0001) and antioxidant capacity (R² = 0.9953, p < 0.0001). The optimum extraction conditions for TPC were 68%, 55 °C and 32.7 mL/g, and for AC were 68%, 56 °C and 31.8 mL/g, respectively. Predicted values for extraction of TPC and AC agreed well with the experimental values. Liquid chromatography–mass spectrometry of the optimally obtained extracts from MPP revealed the major phytochemicals as mangiferin, gallic acid, catechin and epicatechin.     

Gellan gum for reducing oil uptake in sev,a legume based product during deep-fat frying

Gellan gum, a high molecular weight anionic linear polysaccharide produced by pure culture fermentation from Sphingomonas paucimobilis ATCC 31461 is used in a variety of food applications that are based on its unique gelling profile. The present work reports on the effective use of gellan gum on the oil uptake of a traditional Indian deep-fat fried product, sev that is based on chickpea flour. The effect of addition of gellan gum at 0.25–0.75% (w/w) (based on chickpea flour) on the dough texture, and that of the sev prepared was also evaluated using TA.XT2i Texture Analyzer. Addition of gellan gum at 0.25% (w/w) markedly reduced the oil content in the sev from 37.02% in the control to 27.91%. The reduction in oil content beyond 0.25% gellan gum addition was not significant (P = 0.05). Furthermore, while addition of gellan gum significantly altered the texture of dough, it did not significantly affect the texture of sev (P = 0.05). Addition of 0.25% gellan gum in combination with sodium alginate (0.25–1.00%), carboxymethylcellulose (0.25–1.00%) or soy protein isolate (2.5–10.0%) did not affect oil uptake significantly (P = 0.05) as compared to that prepared by the addition of 0.25% gellan gum alone.     

Thermal stability of soy protein isolate and hydrolysate ingredients

The objective of this study was to characterize the effects of pH, protein concentration and calcium supplementation on thermal stability, at 140 °C, of soy protein isolate (SPI) and soy protein hydrolysate (SPH) ingredients. Increasing pH between 6.4 and 7.5 led to significantly (p < 0.05) higher mean heat coagulation times (HCTs) at 140 °C, for all soy protein ingredients at 1.8, and 3.6% (w/v) protein. Increasing protein concentration from 1.8 to 7.2% (w/v) led to shorter HCTs for protein dispersions. Calcium supplementation up to 850 mg/L, except in the case of supplementation of SPI 1 with calcium citrate (CaCit), decreased HCT for soy protein ingredient dispersions, at pH 6.4 – 7.5. No significant differences (p < 0.05) were found in mean HCT for dispersions supplemented with calcium chloride (CaCl₂) and those supplemented with CaCit at 450, 650 and 850 mg/L Ca²⁺, in the pH range 6.4–7.5.     

Influence of polysaccharides and storage during processing on the properties of mango seed kernel extract (microencapsulation)

Extracts from mango (Mangifera indica Linn.) cultivar Chok–Anan seed kernels were studied as active substances, since they are known as a good source of phenolic antioxidants with metal chelating and tyrosinase inhibitory activities. Response surface methodology (RSM) was used to investigate the effect of a combination of polysaccharides selected from gum arabic, maltodextrin and alginate on droplet size distribution, encapsulation efficiency (EE), stability and viscosity of W/O/W emulsions. In addition, the effects of stored emulsion on the properties of the encapsulated powder were studied. The results showed that there were interactions between polysaccharides which affected droplet size distribution, stability, viscosity and EE of multiple emulsions. The RSM showed a good fit to the proposed model with R² > 0.83, 0.79 and 0.69 for viscosity, stability and EE, respectively, with significant correlations (p < 0.05). The formulation which gave an optimal coating material was also a suitable coating mixture for preparation of encapsulated mango seed kernel extract powder. Moreover, if the polysaccharide combination is not appropriate for coating, the storage after emulsion preparation will have a greater effect on the properties of the encapsulated emulsion and powder.     

The effect of high pressure and residual oxygen on the color stability of minced cured restructured ham at different levels of drying,pH, and NaCl

Color stability of minced cured restructured ham was studied by considering the effects of high pressure (HP) (600 MPa, 13 °C, 5 min), raw meat pH₂₄ (low, normal, high), salt content (15, 30 g/kg), drying (20%, 50% weight loss), and residual oxygen level (0.02%–0.30%). Raw hams were selected by pH₂₄ in Semimembranosus, mixed with additives, frozen, sliced, and dried by the Quick-Dry-Slice® (QDS) process followed by HP treatment or not (control). Packaging and storage simulated industrial packaging: modified atmosphere containing 80% N₂, 20% CO₂, and residual O₂ in one of three intervals: < 0.1%, 0.1%–0.2%, or 0.2%–0.3%, and retail storage conditions: chill storage, 12 h light, 12 h darkness. HP improved the stability of the redness of 20% QDS hams, while the stabilizing effect on 50% QDS hams was smaller, concluding that water has the dominating role. Raw meat pH₂₄, salt content, and residual oxygen level had varying effects on the stability of the red color.     

The effect of calcium on microbial quality and consistency of chile pepper (Capsicum annuum cv. Mesilla Cayenne) mash during fermentation

The fermentation of chile peppers (Capsicum annuum cv. Mesilla Cayenne) is dependent on several factors: temperature, acidity, salt concentration, dissolved air, microbial flora, carbohydrate and enzymes. This study measured the effect of two levels (8 or 15 g/100 g) of calcium citrate (CaCit, [Ca₃(C₆H₅O₇)₂]), calcium chloride (CaCl₂) or sodium chloride (NaCl) added to 24 h after pepper was mashed. Viscosity, pH, alcohol, soluble solids and microbial contamination were measured at day 1 and day 21 of fermentation. After 21 days of fermentation the Ca Cit 15 and CaCl₂ 8 treatments improved viscosity compared to control (P?0.05), but were not different from other calcium treatments or NaCl 15. The addition of calcium in the form of CaCl₂ at 8 or 15 g/100 g affected the fermentation of pepper mash by releasing more soluble sugars, increasing alcohol and reducing pH compared to control or other treatments. Also CaCl₂ treatments were effective in controlling microbial growth. Further studies are needed to evaluate color, texture, consistency and flavor of the combination of 8 g/100 g NaCl and 0.04 g/100 g CaCl₂ added to cayenne pepper mash to assess the value in an industrial setting.The effect of calcium on microbial quality and consistency of chile pepper (Capsicum annuum cv. Mesilla Cayenne) mash during fermentation.