A new low-temperature synthesis and electrochemical properties of LiV3O8 hydrate as cathode material for lithium-ion batteries

LiV₃O₈, synthesized from V₂O₅ and LiOH, by heating of a suspension of V₂O₅ in a LiOH solution at a low-temperature (100-200 °C), exhibits a high discharge capacity and excellent cyclic stability at a high current density as a cathode material of lithium-ion battery. The charge-discharge curve shows a maximum discharge capacity of 228.6 mAh g⁻¹ at a current density of 150 mA g⁻¹ (0.5 C rate) and the 100 cycles discharge capacity remains 215 mAh g⁻¹. X-ray diffraction indicates the low degree of crystallinity and expanding of inter-plane distance of the LiV₃O₈ phase, and scanning electronic microscopy reveals the formation of nano-domain structures in the products, which account for the enhanced electrochemical performance. In contrast, the LiV₃O₈ phase formed at a higher temperature (300 °C) consists of well-developed crystal phases, and coherently, results in a distinct reduction of discharge capacity with cycle numbers. Thus, an enhanced electrochemical performance has been achieved for LiV₃O₈ by the soft chemical method via a low-temperature heating process.     

Electrochemical study on LiCo1/6Mn11/6O4 as cathode material for lithium ion batteries at elevated temperature

A novel process via sintering of a precursor from the solution of metal acetates by spray-drying technology was used to synthesize Co-substituted LiCo_1/6Mn_11/6O₄ material for lithium ion batteries. The as-prepared particles were identified as single-phase spinel structure without any impurities in the XRD pattern. The SEM image showed that the particles had good cubic shapes and uniform size distribution with sizes of about 100–200 nm. An ex situ XRD technique was used to characterize the first charge process of the LiCo_1/6Mn_11/6O₄ electrode. The result suggested that the material configuration maintained invariability. The electrochemical properties of the synthesized cathode material were investigated using Li-ion model cells at room and elevated temperature, respectively. In the charge/discharge potential of 3.5–4.4 V at 1/10 C rate, the LiCo_1/6Mn_11/6O₄ electrode delivered high initial capacities of 123 and 127 mAh g⁻¹ at 25 and 55 °C, respectively. Electrochemical cycling tests revealed that the capacity fading occurred mainly in the high-voltage region of 4.08–4.40 V, and the fading rate was 0.107% and 0.302% per cycle at 25 and 55 °C, respectively. The excellent cycling stability and low material cost make it an attractive cathode for high-temperature lithium ion batteries.     

Boron doped lithium trivanadate as a cathode material for an enhanced rechargeable lithium ion batteries

Boron was doped into lithium trivanadate through an aqueous reaction process followed by heating at 100 °C. The B-LiV₃O₈ materials as a cathode in lithium batteries exhibits a specific discharge capacity of 269.4 mAh g⁻¹ at first cycle and remains 232.5 mAh g⁻¹ at cycle 100, at a current density of 150 mAh g⁻¹ in the voltage range of 1.8–4.0 V. The B-LiV₃O₈ materials show excellent stability, with the retention of 86.30% after 100 cycles. These result values are higher than those previous reports indicating B-LiV₃O₈ prepared by our synthesis method is a promising candidate as cathode material for rechargeable lithium batteries. The enhanced discharge capacities and their stabilities indicate that boron atoms promote lithium transferring and intercalating/deintercalating during the electrochemical processes and improve the electrochemical performance of LiV₃O₈ cathode.     

Synthesis and characterization of Nd doped LiMn2O4 cathode for Li-ion rechargeable batteries

Spinel powders of LiMn_1.99Nd_0.01O₄ have been synthesized by chemical synthesis route to prepare cathodes for Li-ion coin cells. The structural and electrochemical properties of these cathodes were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), Raman spectroscopy, cyclic voltammetry, and charge-discharge studies. The cyclic voltammetry of the cathodes revealed the reversible nature of Li-ion intercalation and deintercalation in the electrochemical cell. The charge-discharge characteristics for LiMn_1.99Nd_0.01O₄ cathode materials were obtained in 3.4–4.3 V voltage range and the initial discharge capacity of this material were found to be about 149 mAh g⁻¹. The coin cells were tested for up to 25 charge-discharge cycles. The results show that by doping with small concentration of rare-earth element Nd, the capacity fading is considerably reduced as compared to the pure LiMn₂O₄ cathodes, making it suitable for Li-ion battery applications.     

Effect of Co3(PO4)2 coating on Li[Co0.1Ni0.15Li0.2Mn0.55]O2 cathode material for lithium rechargeable batteries

To prepare a high-capacity cathode material with improved electrochemical performance for lithium rechargeable batteries, Co₃(PO₄)₂ nanoparticles are coated on the surface of powdered Li[Co_0.1Ni_0.15Li_0.2Mn_0.55]O₂, which is synthesized by a simple combustion method. The coated powder prepared under proper conditions for Co₃(PO₄)₂ content and annealing temperature shows an optimum coating layer that consists of a Li_xCoPO₄ phase formed by reaction with lithium impurities during heat treatment. A sample coated with 3 wt.% Co₃(PO₄)₂ and annealed at 800 °C proves to be the best in terms of specific capacity, cycle performance and rate capability. Thermal stability is also enhanced by the coating, as demonstrated a decrease in the onset temperature and/or the heat generated during thermal runaway.     

Electrochemical performance of spinel LiMn2O4 cathode materials made by flame-assisted spray technology

Spinel lithium manganese oxide LiMn₂O₄ powders were synthesized by a flame-assisted spray technology (FAST) with a precursor solution consisting of stoichiometric amounts of LiNO₃ and Mn(NO₃)₂·4H₂O dissolved in methanol. The as-synthesized LiMn₂O₄ particles were non-agglomerated, and nanocrystalline. A small amount of Mn₃O₄was detected in the as-synthesized powder due to the decomposition of spinel LiMn₂O₄ at the high flame temperature. The impurity phase was removed with a post-annealing heat-treatment wherein the grain size of the annealed powder was 33 nm. The charge/discharge curves of both powders matched the characteristic plateaus of spinel LiMn₂O₄ at 3 V and 4 V vs. Li. However, the annealed powder showed a higher initial discharge capacity of 115 mAh g⁻¹ at 4 V. The test cell with annealed powder showed good rate capability between a voltage of 3.0 and 4.3 V and a first cycle coulombic efficiency of 96%. The low coulombic efficiency from capacity fading may be due to oxygen defects in the annealed powder. The results suggest that FAST holds potential for rapid production of uniform cathode materials with low-cost nitrate precursors and minimal energy input.     

Effects of supersonic treatment on the electrochemical properties and crystal structure of LiMn1.5Ni0.5O4 as a cathode material for Li ion batteries

The electrochemical properties and crystal structure of LiMn_1.5Ni_0.5O₄ treated with supersonic waves in an aqueous Ni-containing solution were investigated by performing charge-discharge tests, inductively coupled plasma (ICP) analysis, scanning electron microscopy (SEM), iodometry, X-ray diffraction (XRD), powder neutron diffraction and synchrotron powder XRD. The charge-discharge curve of LiMn_1.5Ni_0.5O₄ versus Li/Li⁺ has plateaus at 4.1 and 4.7 V. The 4.1 V versus Li/Li⁺ plateau due to the oxidation of Mn^3+/4+ was reduced by the supersonic treatment. During the charge-discharge cycling test at 25 °C, the supersonic treatment increased the discharge capacity of the 50th cycle. Rietveld analysis of the neutron diffraction patterns revealed that the Ni occupancy of the 4b site in LiMn_1.5Mn_0.5O₄, which is mainly occupied by Ni, was increased by the supersonic treatment. This result suggests that Ni²⁺ is partially substituted for Mn^3+/4+ during the supersonic treatment.     

High power and high capacity cathode material LiNi0.5Mn0.5O2 for advanced lithium-ion batteries

Single-phase lithium nickel manganese oxide, LiNi_0.5Mn_0.5O₂, was successfully synthesized from a solid solution of Ni_1.5Mn_1.5O₄ that was prepared by means of the solid reaction between Mn(CH₃COO)₂·4H₂O and Ni(CH₃COO)₂·4H₂O. XRD pattern shows that the product is well crystallized with a high degree of Li–M (Ni, Mn) order in their respective layers, and no diffraction peak of Li₂MnO₃ can be detected. Electrochemical performance of as-prepared LiNi_0.5Mn_0.5O₂ was examined in the test battery by charge–discharge cycling with different rate, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The cycling behavior between 2.5 and 4.4 V at a current rate of 21.7 mA g⁻¹ shows a reversible capacity of about 190 mAh g⁻¹ with little capacity loss after 100 cycles. High-rate capability test shows that even at a rate of 6C, stable capacity about 120 mAh g⁻¹ is retained. Cyclic voltammetry (CV) profile shows that the cathode material has better electrochemical reversibility. EIS analysis indicates that the resistance of charge transfer (R_ct) is small in fully charged state at 4.4 V and fully discharged state at 2.5 V versus Li⁺/Li. The favorable electrochemical performance was primarily attributed to regular and stable crystal structure with little intra-layer disordering.     

Effect of mechanical activation process parameters on the properties of LiFePO4 cathode material

Pure, nano-sized LiFePO₄ and carbon-coated LiFePO₄ (LiFePO₄/C) positive electrode (cathode) materials are synthesized by a mechanical activation process that consists of high-energy ball milling and firing steps. The influence of the processing parameters such as firing temperature, firing time and ball-milling time on the structure, particle size, morphology and electrochemical performance of the active material is investigated. An increase in firing temperature causes a pronounced growth in particle size, especially above 600 °C. A firing time longer than 10 h at 600 °C results in particle agglomeration; whereas, a ball milling time longer than 15 h does not further reduce the particle size. The electrochemical properties also vary considerably depending on these parameters and the highest initial discharge capacity is obtained with a LiFePO₄/C sample prepared by ball milling for 15 h and firing for 10 h at 600 °C. Comparison of the cyclic voltammograms of LiFePO₄ and LiFePO₄/C shows enhanced reaction kinetics and reversibility for the carbon-coated sample. Good cycle performance is exhibited by LiFePO₄/C in lithium batteries cycled at room temperature. At the high current density of 2C, an initial discharge capacity of 125 mAh g⁻¹ (73.5% of theoretical capacity) is obtained with a low capacity fading of 0.18% per cycle over 55 cycles.     

Improvement in the Ppy/V2O5 hybrid as a cathode material for Li ion batteries using PSA as an organic additive

With the aim of improving the electrochemical properties of this candidate cathodic material for lithium ion batteries, a vanadium oxide (V₂O₅) and polypyrrole (Ppy) hybrid was prepared using pyridinesulfonic acid (PSA) as additive. The hybrid synthesis has been carried out in the literature by chemical polymerization of pyrrole in the host inorganic matrix, using the V₂O₅ dispersed in an acidic solution as an oxidizing agent. In this work the hybrid has been synthesised with PSA giving good results compared to other samples of the pristine V₂O₅ and to the Ppy/V₂O₅ hybrid without additive. An improvement of about 20% in the charge storage capacity has been achieved. The reasons for this improvement are discussed and analyzed using different experimental techniques. The hybrid material has the added advantage of an improved performance without the addition of any binder or conducting element as a cathode in a lithium ion battery.     

Effect of FePO4 coating on electrochemical and safety performance of LiCoO2 as cathode material for Li-ion batteries

LiCoO₂ was surface modified by a coprecipitation method followed by a high-temperature treatment in air. FePO₄-coated LiCoO₂ was characterized with various techniques such as X-ray diffraction (XRD), auger electron spectroscopy (AES), field emission scanning electron microscope (FE-SEM), energy dispersive spectroscopy (EDS), transmission electron microscope (TEM), electrochemical impedance spectroscopy (EIS), 3 C overcharge and hot-box safety experiments. For the 14500R-type cell, under a high charge cutoff voltage of 4.3 and 4.4 V, 3 wt.% FePO₄-coated LiCoO₂ exhibits good electrochemical properties with initial discharge specific capacities of 146 and 155 mAh g⁻¹ and capacity retention ratios of 88.7 and 82.5% after 400 cycles, respectively. Moreover, the anti-overcharge and thermal safety performance of LiCoO₂ is greatly enhanced. These improvements are attributed to the FePO₄ coating layer that hinders interaction between LiCoO₂ and electrolyte and stabilizes the structure of LiCoO₂. The FePO₄-coated LiCoO₂ could be a high performance cathode material for lithium-ion battery.     

SmBaCo2O5+x double-perovskite structure cathode material for intermediate-temperature solid-oxide fuel cells

SmBaCo₂O_5+x (SBCO), an oxide with double-perovskite structure, has been developed as a novel cathode material for intermediate-temperature solid-oxide fuel cells (IT-SOFCs). The electrical conductivity of an SBCO sample reaches 815–434 S cm⁻¹ in the temperature range 500–800 °C. XRD results show that an SBCO cathode is chemically compatible with the intermediate-temperature electrolyte materials Sm_0.2Ce_0.8O_1.9 (SDC) and La_0.9Sr_0.1Ga_0.8Mg_0.2O_3−δ (LSGM). The polarization resistances of an SBCO cathode on SDC and LSGM electrolytes are 0.098 and 0.054 Ω cm² at 750 °C, respectively. The maximum power densities of a single cell with an SBCO cathode on SDC and LSGM electrolytes reach 641 and 777 mW cm⁻² at 800 °C, respectively. The results of this study demonstrate that the double-perovskite structure oxide SBCO is a very promising cathode material for use in IT-SOFCs.     

Solution combustion synthesis of layered LiNi0.5Mn0.5O2 and its characterization as cathode material for lithium-ion cells

LiNi_0.5Mn_0.5O₂, a promising cathode material for lithium-ion batteries, is synthesized by a novel solution-combustion procedure using acenaphthene as a fuel. The powder X-ray diffraction (XRD) pattern of the product shows a hexagonal cell with a = 2.8955 Å and c = 14.1484 Å. Electron microscopy investigations indicate that the particles are of sub-micrometer size. The product delivers an initial discharge capacity of 161 mAh g⁻¹ between 2.5 and 4.6 V at a 0.1 C rate and could be subjected to more than 50 cycles. The electrochemical activity is corroborated with cyclic voltammetric (CV) and electrochemical impedance data. The preparative procedure presents advantages such as a low cation mixing, sub-micron particles and phase purity.     

Low-temperature synthesis of highly crystallized LiMn2O4 from alpha manganese dioxide nanorods

One-dimensional alpha manganese dioxide (α-MnO₂) nanorods synthesized by a hydrothermal route were explored as the starting material for preparing lithium manganese spinel LiMn₂O₄. Pure and highly crystalline spinel LiMn₂O₄ was easily obtained from α-MnO₂ nanorods through a low-temperature solid-state reaction route, while Mn₂O₃ impurity was present along with the spinel phase when commercial MnO₂ was used as starting material. The particle size of LiMn₂O₄ prepared from α-MnO₂ nanorods was about 100 nm with a homogenous distribution. Electrochemical tests demonstrated that the LiMn₂O₄ thus prepared exhibited a higher capacity than that prepared from commercial MnO₂. Therefore, α-MnO₂ nanorods are proved to be a promising starting material for the preparation of high quality LiMn₂O₄.     

Effect of protecting metal oxide (Co3O4) layer on electrochemical properties of spinel Li1.1Mn1.9O4 as a cathode material for lithium battery applications

Metal oxide (Co₃O₄) was coated on spinel Li_1.1Mn_1.9O₄ using glutamic acid. Powder X-ray diffraction pattern of Co₃O₄-coated spinel Li_1.1Mn_1.9O₄ showed that the Co₃O₄ coating medium was not incorporated in the spinel bulk structure. Morphology of the Co₃O₄-coated spinel Li_1.1Mn_1.9O₄ was observed by scanning electron microscopy and transmission electron microscopy. The cycling performance of the Co₃O₄-coated spinel Li_1.1Mn_1.9O₄ was obviously improved, compared to the pristine Li_1.1Mn_1.9O₄ at elevated temperature (55 °C). Improvement of rate capability was also achieved at high C-rates.     

Evaluation of Sr substituted Nd2CuO4 as a potential cathode material for intermediate-temperature solid oxide fuel cells

The Nd_1.7Sr_0.3CuO₄ (NSCu) material with perovsikite-related structure was synthesized and evaluated as a new cathode for intermediate-temperature solid oxide fuel cells (IT-SOFCs). The crystal structure, thermal expansion, electrical conductivity and electrochemical performance of NSCu have been investigated by X-ray diffraction, a dilatometer, DC four-probe method, AC impedance and cyclic voltammetry (CV) techniques. The polarization resistances of NSCu cathode on Sm-doped ceria (SDC) electrolyte in air were 0.07 Ω cm², 0.24 Ω cm² and 1.60 Ω cm² at 800 °C, 700 °C and 600 °C, respectively. The results demonstrated that both impedance and CV methods are consistent with high exchange current density i₀ (390.7 mA/cm² and 76.1 mA/cm² at 800 °C and 700 °C.), making NSCu a promising cathode material for the IT-SOFCs based on doped ceria electrolytes.     

Li4Ti5O12/CNTs composite anode material for large capacity and high-rate lithium ion batteries

Li₄Ti₅O₁₂ sub-micro crystallites are synthesized by ball-milling and one-step sintering under different heat treatment temperature from 700 °C to 900 °C. The composite electrode of Li₄Ti₅O₁₂/carbon nanotubes (CNTs) is prepared by mixing powders of Li₄Ti₅O₁₂ and CNTs in different weight ratios. Before mixing, in order to disperse CNTs in Li₄Ti₅O₁₂ particles preferably, the CNTs are cut and dispersed by hyperacoustic shear method and the composite electrodes of low resistance of about 20–30 Ω are obtained. The composite electrodes have steady discharge platform of 1.54 V and large specific capacity, initial discharge capacities are 168, 200, 196, 176 mAh g⁻¹ in different Li₄Ti₅O₁₂:CNTs weight ratios of 94:1, 92:3, 90:5, 88:7 respectively at 0.1 C discharge rate for the Li₄Ti₅O₁₂ synthesized in an optimized heat treatment temperature of 800 °C. In our experimental range, the composite electrode in a CNTs weight ratio of 3:92 shows the best performance under different discharge rate such as the initial capacity is 200 mAh g⁻¹ with discharge capacities retention rate of nearly 100%. Its capacity is about 151 mAh g⁻¹ under 20 C rate discharge condition with excellent high-rate performance. There is almost no decline after 20th cycles under 10 C rate discharging condition.     

Effect of Ag additive on the performance of LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion battery

The LiNi_1/3Co_1/3Mn_1/3O₂/Ag composite used for cathode material of lithium ion battery was prepared by thermal decomposition of AgNO₃ added to commercial LiNi_1/3Co_1/3Mn_1/3O₂ powders to improve the electrochemical performance of LiNi_1/3Mn_1/3Co_1/3O₂. Structure and morphology analysis showed that Ag particles were dispersed on the surface of LiNi_1/3Co_1/3Mn_1/3O₂ instead of entering the crystal structure. The results of charge–discharge tests showed that Ag additive could improve the cycle performance and high-rate discharge capability of LiNi_1/3Mn_1/3Co_1/3O₂. Extended analysis indicated that Ag was unstable in the commercial electrolyte at high potential. The improved electrochemical performance caused by Ag additive was associated not only with the enhancement of electrical conductivity of the material and the lower polarization of the cell, but also with the increased “c” parameter of LiNi_1/3Mn_1/3Co_1/3O₂ after repeated charge/discharge cycles and the compact and protective SEI layer formed on the surface of LiNi_1/3Mn_1/3Co_1/3O₂.     

Electrochemical performance of Al-doped LiMn2O4 prepared by different methods in solid-state reaction

Al-doped LiMn₂O₄ cathode materials synthesized by a newly developed wet-milling method and a dry process method using a conventional solid-state reaction were evaluated physicochemically and electrochemically. In the wet-milling method, a precursor was made from the raw materials atomized by a wet milling. A good cyclic performance was obtained for the LiMn₂O₄ samples prepared by the wet-milling method, achieved up to 99% of retention of capacity at 50 °C at the 30th cycle. The precursor obtained by the wet-milling method was well homogenous and highly reactive due to their finely ground particles, giving good crystallinity to LiMn₂O₄ products.     

Synthesis of LiNi1/3Co1/3Mn1/3O2 as a cathode material for lithium battery by the rheological phase method

LiNi_1/3Co_1/3Mn_1/3O₂ is prepared by a rheological phase method. Homogeneous precursor derived from this method is calcined at 800 °C for 20 h in air, which results in the impressive differences in the morphology properties and electrochemical behaviors of LiNi_1/3Co_1/3Mn_1/3O₂ in contrast to that obtained by a solid-state method. The microscopic structural features of LiNi_1/3Co_1/3Mn_1/3O₂ are investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD). The electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ are carried out by charge–discharge cycling test. All experiments show that the microscopic structural features and the morphology properties are deeply related with the electrochemical performances. The obtained results suggest that the rheological phase method may become an effective route to prepare LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for lithium battery.