Heterologous production of basidiomycetous peptidases to decrease sodium chloride in food

In the past, the topic of excessive salt consumption associated with various chronic diseases became a focus of nutritional science. Enzymes such as hydrolases and specifically peptidases are widely used in industry since they do not require cofactors, are often stable at high pH values, and have a broad cleavage specificity. Thus, a new approach to use peptidases would be the generation of L-arginyl dipeptides, which do not have a taste on their own, but are able to enhance the salty taste. This thesis should focus on the isolation and characterisation of arginyl-specific peptidase genes from basidiomycetes to generate these dipeptides. First, various peptidase genes from Trametes versicolor, Phanerochaete chrysosporium and Schizophyllum commune were isolated and expressed in Escherichia coli or Komagataella phaffii. The serine (ABB73029) peptidase from P. chrysosporium and the aspartate peptidase from T. versicolor (EIW62808) were successfully purified. Activity assays showed that the aspartate peptidase from T. versicolor is not an arginyl-specific peptidase, while the analysis of cleavage sites indicates that the serine peptidase from P. chrysosporium is an exopeptidase. Next, 29 basidiomycetes were cultivated over 24 days in minimal medium with 1 % gluten and analysed regarding their endo- and exopeptidase activity. Out of 29 fungi, five interesting species with arginyl-specific peptidase activity were chosen, namely Agrocybe aegerita, Fomitop- sis pinicola, Flammulina velutipes, Hypholoma sublateritium and Pleurotus eryngii. After purification of the culture supernatant using size exclusion chromatography, active fractions were used to hydrolyse the substrate casein, and cleavage products were analysed. Cleavage sites were only detected for A. aegerita, F. velutipes and P. eryngii. Beside arginyl-specific cleavage sites also a high amount of undesired exopeptidase cleavage sites was determined assuming that these peptidases are probably exopeptidases rather than arginyl-specific peptidases. Generation of salt taste enhancing dipeptides should finally be achieved with a dipeptidyl- peptidase V (DPPV) from Pleurotusfloridanus. PflDPPV was heterologously produced in E. coli, had optima at pH 8.5 and 60 °C and was not completely inhibited by the tested peptidase inhibitors.     

Properties of thermostable extracellular FOS-producing fructofuranosidase from <Emphasis Type="Italic">Cryptococcus</Emphasis> sp.

The present work was devoted to investigations concerning the fructooligosaccharide producing activity of Cryptococcus sp. LEB-V2 (Laboratory of Bioprocess Engineering, Unicamp, Brazil) and its extracellular fructofuranosidase. After cell separation, the enzyme was purified by ethanol precipitation and anion exchange chromatography. The enzyme showed both fructofuranosidase (FA) and fructosyl transferase (FTA) activity. With sucrose as substrate, the data failed to fit the Michaelis–Menten behaviour, showing a substrate inhibitory model. The K _m, K _i and v _max values were shown to be 64 mM, 3 M and 159.6 μmol mL⁻¹ min⁻¹ for FA and 131 mM, 1.6 M and 377.8 μmol mL⁻¹ min⁻¹ for FTA, respectively. The optimum pH and temperature were found to be around 4.0 and 65 °C, while the best stability was achieved at pH 4.5 and temperatures below 60 °C, for both the FA and FTA. Despite the strong FA activity, the high transfructosylating activity allowed for good FOS production from sucrose (35% yield).     

Aqueous medium enzymatic preparation of <Emphasis Type="SmallCaps">l</Emphasis>-alpha glycerylphosphorylcholine optimized by response surface methodology

The ability of Rhizopus chinensis lipase (Thermo 4S-3) to catalyze the deacylation of l,2-diacyl-sn-glycero-3-phosphocholines (sn-1,2-PC) for l-alpha glycerylphosphorylcholine (l-α-GPC) preparation was investigated. Response surface methodology (RSM), based on a modified central composite rotatable design, was employed to examine the effects of substrate concentrations, temperature, enzyme loading, and dosage of CaCl₂ on the l-α-GPC yield. RSM analysis indicated good correlation between experimental and predicated values. The optimal condition was confirmed as follows: reaction time, 3.5 h; temperature, 43 °C; enzyme loading, 28.2 U mL⁻¹; substrate concentration, 51.5 mg mL⁻¹; and dosage of CaCl₂, 1.9 mg mL⁻¹. Under these conditions, the l-α-GPC yield increased by 96.8%, which was close to the amount predicted by the model.     

Properties of <Emphasis Type="Italic">Aspergillus subolivaceus</Emphasis> free and immobilized dextranase

Aspergillus subolivaceus dextranase is immobilized on several carriers by entrapment and covalent binding with cross-linking. Dextranase immobilized on BSA with a cross-linking agent shows the highest activity and considerable immobilization yield (66.7%). The optimum pH of the immobilized enzyme is shifted to pH 6.0 as compared with the free enzyme (pH 5.5). The optimum temperature of the reaction is resulted at 60 °C for both free and immobilized enzyme. Thermal and pH stability are significantly improved by the immobilization process. The calculated K _m of the immobilized dextranase (14.24 mg mL⁻¹) is higher than that of the free dextranase (11.47 mg mL⁻¹), while V _max of the immobilized enzyme (2.80 U μg protein⁻¹) is lower than that of the free dextranase (11.75 U μg protein⁻¹). The immobilized enzyme was able to retain 76% of the initial catalytic activity after 5.0 cycles.     

Partial Purification and Characterization of Extracellular Fructofuranosidase with Transfructosylating Activity from <Emphasis Type="Italic">Candida</Emphasis> sp.

The present work was carried out with the aim to investigate some properties of an extracellular fructofuranosidase enzyme, with high transfructosylating activity, from Candida sp. LEB-I3 (Laboratory of Bioprocess Engineering, Unicamp, Brazil). The enzyme was produced through fermentation, and after cell separation from the fermented medium, the enzyme was concentrated by ethanol precipitation and than purified by anion exchange chromatography. The enzyme exhibited both fructofuranosidase (FA) and fructosyltransferase (FTA) activities on a low and high sucrose concentration. With sucrose as the substrate, the data fitted the Michaellis–Menten model for FA, showing rather a substrate inhibitory shape for fructosyltransferase activity. The K _m and v _max values were shown to be 13.4 g L⁻¹ and 21.0 μmol mL⁻¹ min⁻¹ and 25.5 g L⁻¹ and 52.5 μmol mL⁻¹ min⁻¹ for FA and FTA activities, respectively. FTA presented an inhibitory factor K _i of 729.8 g L⁻¹. The optimum conditions for FA activity were found to be pH 3.25–3.5 and temperatures around 69 °C, while for FTA, the optimum condition were 65 °C (±2 °C) and pH 4.00 (±0.25). Both activities were very stable at temperatures below 60 °C, while for FA, the best stability occurred at pH 5.0 and for FTA at pH  4.5–5.0. Despite the strong fructofuranosidase activity, causing hydrolysis of the fructooligosaccharides (FOS), the high transfructosilating activity allows a high FOS production from sucrose (44%).     

The Influence of Oxygen Volumetric Mass Transfer Rates on Cyclodextrin Glycosyltransferase Production by Alkaliphilic Bacillus circulans in Batch and Fed-Batch Cultivations

In this work, the influence of oxygen mass transfer rates on the production of cyclodextrin glycosyltransferase (CGTase) by the alkaliphilic bacterium Bacillus circulans ATCC 21783 was investigated. Experimental design and response surface methodology were applied to optimize agitation speed and air flow rate in batch cultivations, in order to identify their significant effects and interactions with the synthesis of CGTase. Results were expressed as the volumetric mass transfer rates of oxygen (k_la, [per hour]). The maximal CGTase productivity of 155 U mL⁻¹ h⁻¹ was achieved with k_la of 48 h⁻¹. CGTase production was also studied in fed-batch cultures using the optimized parameters obtained in the batch experiments. The maximal CGTase productivity on fed-batch cultivations was 137 U mL⁻¹ h⁻¹ with feeding rates of starch at 0.17 g L⁻¹ h⁻¹.     

Chemiluminescence Detection of 2,4,5-Trichlorophenoxy Acetic Acid in Apple Juice by Digital Image Analysis

An image-based detection of an enhanced chemiluminescence enzyme-linked immunosorbent assay was developed for 2,4,5-trichlorophenoxy acetic acid with an anti-rabbit secondary antibody conjugated to peroxidase (goat anti-rabbit IgG–HRP). Data acquisition on microtiter wells is performed using a low-cost charge-coupled device camera for capturing images. The standard curve was produced for 0.01–5,000 ng mL⁻¹ of 2,4,5-trichlorophenoxy acetic acid. The minimum detectable concentration was 24 pg mL⁻¹, and the relative standard deviation was 5.5% (n = 10) for a 5 ng mL⁻¹ sample concentration. Similar sensitivity was obtained with enzyme-linked immunosorbent assay using the same polyclonal antibody and data acquisition by a spectrofluorometer. This method was applied to apple juice with recoveries between 95% and 111% and relative standard deviation between 6.1% and 11.3%.     

A Sensitive, Selective New Analytical Reagent, 2, 6-Diacetylpyridine bis-4-phenyl-3-thiosemicarbazone for Extractive Spectrophotometric Determination of Mo(VI) in Food Samples

Synthesized a new reagent 2, 6-Diacetylpyridine bis-4-phenyl-3-thiosemicarbazone (2, 6-DAPBPTSC) characterized and is proposed as a sensitive and selective analytical reagent for the extractive spectrophotometric determination of molybdenum(VI) at pH 3.5 to form a yellowish orange colored 1:1 chelate complex. The absorbance was measured at a maximum wavelength, 500 nm. This method obeys Beer’s law in the concentration range 0.90–9.00 μg mL⁻¹ and the correlation coefficient of Mo(VI)–2,6-DAPBPTSC complex is 0.954, which indicates an adequate linearity between the two variables with good molar absorptivity and Sandell’s sensitivity, 1.212 × 10⁴ L mol⁻¹cm⁻¹, 0.0079 μg cm⁻², respectively. The precision and accuracy of the method is checked with calculation of relative standard deviation (n = 5), 0.894% and the detection limit value is 0.0056 μg mL⁻¹. The instability constant of the method has been calculated by Asmus’ method as 6.476 × 10^–5, at room temperature. The interfering effect of various cations and anions has also been studied. The method was successfully applied for the determination of Mo(VI) in food and water samples. The validity of the present method was evaluated in terms of Student ‘t’ test and Variance ‘f’ test, which indicates the significance of the present method an inter comparison of the experimental values, using atomic absorption spectrometer.     

Protein and Amino Acid Solubilization using Bacillus cereus, Bacillus velesensis, and Chryseobacterium sp. from Chemical Extraction Protein Residue

The exploitation of natural resources and increased environmental pollution have stressed the need for more valued use of residues generated by the fish processing plants, and species with low commercial value. Protein hydrolysis processes—whether chemical or enzymatic—generate insoluble proteins from bones, scales, and skin, which are not recovered and are often used as animal feed or disposed off into the environment. As an alternative, insoluble proteins could be converted in useful biomass protein concentrates or amino acids, by using microbial proteases. This work examines the solubilization of insoluble proteins discarded in the process of pH change in fish residues from Whitemouth croaker (Micropogonias furnieri), through the use of bacterial proteases. Temperature and pH conditions in the fermentations were adjusted for each microorganism and time was set at 96 h. Two substrates (acid and alkaline), three microorganism strains, and the substrate concentration used were examined. Among the three strains, Bacillus velesensis reached the higher proteolytic activity (47.56 U mL⁻¹), followed by Chryseobacterium sp. with 23.46 U mL⁻¹. Bacillus cereus (3.13 U mL⁻¹) showed low proteolytic activity. B. velesensis was the bacterium that presented better results with the analyzed substrates, achieving larger amount of soluble protein and free amino acids. The findings showed that these bacteria could be used to solubilize proteins from fish byproducts, which may be particularly useful to increase the yield of hydrolysis process or food formulations.     

Determination of Melamine in Liquid Milk and Milk Powder by Titania-Based Ligand-Exchange Hydrophilic Interaction Liquid Chromatography

A simple and rapid high-performance liquid chromatography (HPLC) procedure for the analysis of melamine in liquid milk and milk powder has been developed. Decrease of acetonitrile percentage and phosphate buffer concentration in mobile phase, and lowering of buffer pH and column temperature would benefit the retention of melamine on titania. Taking advantage of the ligand-exchange and hydrophilic interaction mixed retention mode on bare titania column, neither complex pretreatment nor ion-pair reagent was required. The whole analysis for one sample including sample pretreatment and HPLC analysis could be accomplished within 30 min. The method presented good linearity (R ² = 0.9998) in a wide range of 0.02–10 μg mL⁻¹. The limit of detection (3σ) and limit of quantification (10σ) of the method were 6 and 20 μg L⁻¹, respectively, which were equivalent to 15 and 50 μg kg⁻¹ melamine in liquid milk, 60 and 200 μg kg⁻¹ melamine in milk powder, respectively. Such sensitivity could be compared with those obtained by HPLC with solid-phase extraction or HPLC coupled with tandem mass spectrometry and was adequate for the screening of melamine in tainted dairy products. The repeatability (RSDs) of the retention times and peak areas of 11 replicate detections of 1.0 μg mL⁻¹ melamine were 0.32% and 2.5%, respectively. The intermediate precision on three consecutive days (RSDs, n = 6) of the retention times and peak areas were 1.1% and 2.3%, respectively. The recovery of spiked melamine in dairy samples ranged from 95.2% to 105%. The simplicity, sensitivity and rapidity of the proposed method make it an effective alternative detecting technique for melamine.     

Production of Cell Membrane-Bound α- and β-Glucosidase by Lactobacillus acidophilus

Hydrolytic enzymes, viz. α- and β-glucosidase, were produced from indigenous isolate, Lactobacillus acidophilus, isolated from fermented Eleusine coracana. Production of these enzymes was enhanced by optimizing media using one factor at a time followed by response surface methodology. The optimized media resulted in a 2.5- and 2.1-fold increase in α- and β-glucosidase production compared with their production in basal MRS medium. Localization studies indicated 80% of the total activity to be present in the cell membrane-bound fraction. Lack of sufficient release of these enzymes using various physical, chemical, and enzymatic methods confirmed their unique characteristic of being tightly cell membrane bound. Enzyme characterization revealed that both α- and β-glucosidase exhibited optimum catalytic activity at 50 °C and pH 6.0 and 5.0, respectively. K _m and V _max of α-glucosidase were 4.31 mM and 149 μmol min⁻¹ mL⁻¹ for p-nitrophenyl-α-d-glucopyranoside as substrate and 3.8 mM and 120 μmol min⁻¹ mL⁻¹ for β-glucosidase using p-nitrophenyl-β-d-glucopyranoside as the substrate.     

ITS-RFLP characterization of black <Emphasis Type="Italic">Aspergillus</Emphasis> isolates responsible for ochratoxin A contamination in cocoa beans

In the present study, ochratoxigenic mycobiota in cocoa beans was identified at species level by digestion of the ITS products using the endonucleases HhaI, NlaIII and RsaI. Of the 132 isolates of Aspergillus section Nigri collected from cocoa beans, 89 were identified as A. tubingensis, 27 as A. niger, 10 as A. tubingensis-like and 6 as A. carbonarius. No variation was observed between RFLP patterns (C, N, T1 and T2) described previously for grape isolates and those of the cocoa isolates analysed. With respect to OTA-producing fungi, a high percentage of black aspergilli (50.7%) was able to produce OTA. Additionally, most of the OTA-producing isolates were of moderate toxigenicity, producing amounts of OTA from 10 μg g⁻¹ to 100 μg g⁻¹. Percentages of OTA-producing isolates in the A. niger aggregate were higher than in other substrates, ranging from 30% to 51.7%. Furthermore, the detected levels of OTA production in the A. niger aggregate, particularly in A. tubingensis species was higher than in A. carbonarius, ranging from 0.7 μg g⁻¹ to 120 μg g⁻¹ (mean 24.55 μg g⁻¹). Due to the high occurrence, percentage of ocratoxigenic isolates and their ability to produce OTA, isolates belonging to the A. niger aggregate could be considered as the main cause of OTA contamination in cocoa beans used for manufacturing cocoa products.     

<Emphasis Type="Italic">In silico</Emphasis> phylogenetic analysis of lactic acid bacteria and new primer set for identification of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> in food samples

Lactic acid bacteria (LAB) include species very closely related both physiologically and genotypically. Therefore, the identification of this bacteria group using conventional phenotypic methods is ambiguous and cumbersome. In this study, we have analyzed a recA gene fragment from 30 bacteria, including LAB and species common in the human gastrointestinal tract, aiming to evaluate the gene conservation among them and the development of primers and PCR conditions able to discriminate Lactobacillus plantarum strains from LAB closely related. The fragment with 995 bp of recA gene has grouped LAB, enterobacteria and bifidobacteria, in different clusters. A novel primer pair, LPrecAF and LPrecAR with 23 and 18 bp, respectively, has allowed the single amplification of a 108 bp fragment of L. plantarum strains contained in culture broth and fermented dairy samples. The observed detection limit for food samples and for cultures broth were 1 × 10³ and 7 × 10² CFU mL⁻¹, respectively. This approach proved to be a simple and efficient method for the identification and monitoring of L. plantarum in food, feeds, and culture broth. Moreover, the assay could be used in the studies from human or environmental microbiota.     

Value‐added use of mushroom ergothioneine as a colour stabilizer in processed fish meats

BACKGROUND: Ergothioneine (ESH), a potent antioxidant, has been found in certain edible mushrooms. Our previous research showed that ESH extracted from the edible mushroom Flammulina velutipes has a positive effect on the colour stability of beef and tuna meat. The purpose of the present study was to compare the efficacy and applicability of ESH extracts prepared from different mushroom species as a colour stabilizer in fish meats. RESULTS: Levels of ESH higher than 2.8 mg mL^?1 were found in extracts prepared from the fruiting bodies of F. velutipes, Lentinula edodes, Pleurotus cornucopiae and Pleurotus eryngii and the processing waste of F. velutipes. When 1 mL of each of the extracts was added to 100 g of minced bigeye tuna and yellowtail meats, the bright‐red colour remained after 5 and 2 days, respectively, of ice storage. The anti‐discoloration efficacy of 1 mL of the extracts prepared from 10 g of the fresh waste portion of F. velutipes was similar to that of its fruiting body or 0.5 g kg^?1 of sodium ascorbate when added to 100 g of minced bigeye tuna meat under ice storage. CONCLUSION: The results of this study clearly showed that ESH prepared from different mushroom species stabilized the colour of fish meats, and the extract from the F. velutipes was the most effective. Copyright © 2010 Society of Chemical Industry     

Optimization of the culture medium composition using response surface methodology for new recombinant cyprosin B production in bioreactor for cheese production

The optimization of culture medium composition was carried out for improvement the recombinant cyprosin B production, an enzyme with high milk-clotting activity. Response surface methodology (RSM) was applied to evaluate the effect of variables namely glucose, yeast extract (YE) and bactopeptone present in the culture medium, used for recombinant cyprosin B production by transformed Saccharomyces cerevisiae BJ1991 strain in shake-flask and bioreactor culture conditions. The central composite experimental design (CCD) was adopted to derive a statistical model for optimizing the composition of the fermentation medium. The optimal concentration estimated for each variable related to a theoretical maximum of cyprosin B activity (488 U mL⁻¹) was 30 g L⁻¹ glucose, 15 g L⁻¹ YE and 27 g L⁻¹ bactopeptone. The optimized medium composition, based on empirical model, led to a cyprosin B activity of 519 U mL⁻¹, which corresponds to an increase of 46%. The fermentation using optimized culture medium in a 5-L bioreactor allowed a significant increase in biomass (82%) and recombinant cyprosin B production (139%). The improvement in the recombinant cyprosin B production after optimization process can be considered adequate for large-scale applications, and the clotting activity of cyprosin B account for their use in industrial cheese making.     

Combined Use of Liquid–Liquid Microextraction and Carbon Nanotube Reinforced Hollow Fiber Microporous Membrane Solid-Phase Microextraction for the Determination of Triazine Herbicides in Water and Milk Samples by High-Performance Liquid Chromatography

A simple, efficient and environmentally friendly method for the extraction and determination of five triazine herbicides in water and milk samples was developed by simultaneous liquid–liquid microextraction and carbon nanotube reinforced hollow fiber microporous membrane solid-phase microextraction coupled with high-performance liquid chromatography–diode array detection. The parameters that affect the extraction efficiencies, including the type and concentration of multi-walled carbon nanotube, type of membrane solvent and desorption solvent, the type and volume of the extraction solvent in sample solution, extraction time and temperature, the pH of sample solution, stirring rate, and ionic strength were investigated and optimized. Under the optimum conditions, the method shows a good linearity within a range of 0.5–200 ng mL⁻¹ for water samples and 1–200 ng mL⁻¹ for milk samples, with the correlation coefficients (r) varying from 0.9991 to 0.9998 and from 0.9989 to 0.9994, respectively. The limits of detection were in the range between 0.08 and 0.15 ng mL⁻¹ for water samples and 0.3 and 0.5 ng mL⁻¹ for milk samples, while the relative standard deviations varied from 4.6% to 6.9% and from 5.3% to 7.7%, respectively. The recoveries of the target analytes at spiking levels of 5.0 and 50.0 ng mL⁻¹ were in the range from 86.6% to 106.8% for water samples and from 81.3% to 97.4% for milk samples. The results demonstrated that the developed method was an efficient pretreatment and enrichment procedure for the determination of triazine pesticides in real water and milk samples.     

A Highly Sensitive Adsorptive Stripping Voltammetric Method for Simultaneous Determination of Lead and Vanadium in Foodstuffs

This work describes a procedure for the simultaneous determination of vanadium and lead in some food and water samples using adsorptive stripping voltammetric method. The method is based on the adsorptive accumulation of cupferron complexes of these elements onto hanging mercury drop electrode, followed by reduction of adsorbed species by voltammetric scan using differential pulse modulation. Optimal analytical conditions were found to be cupferron concentration of 8.00 × 10⁻⁵ M, pH of 4.8 (phosphate buffer), an accumulation potential at −100 mV, and a scan rate of 80 mV s⁻¹. With an accumulation time of 50 s, the peak currents proportional to the concentration of lead and vanadium over the 0.05–80.00 and 0.10–105.00 ng mL⁻¹ ranges with detection limit of 0.02 and 0.01 ng mL⁻¹, respectively. The procedure was applied to simultaneous determination of vanadium and lead in some food and water samples with satisfactory results.     

Effect of dynamic high-pressure microfluidization at different temperatures on the antigenic response of bovine β-lactoglobulin

The antigenic response of β-lactoglobulin (β-Lg), treated by dynamic high-pressure microfluidization (DHPM) at different temperatures, was determined by an indirect competitive enzyme-linked immunosorbent assay using polyclonal antibodies from rabbit serum. DHPM treatment causes changes in the protein structure and may influence the antigenicity of β-Lg. DHPM treatment of β-Lg at 90 °C showed significant effects with the antigenic response of 5.2 μg mL⁻¹ (untreated), 45 μg mL⁻¹ (40 MPa), 79 μg mL⁻¹ (80 MPa), 132 μg mL⁻¹ (120 MPa), and 158 μg mL⁻¹ (160 MPa). In combination with temperature treatment (70–90 °C), the antigenic response enhanced as the temperature increased at 160 MPa. The β-Lg antigenicities were about 14, 108, and 158 μg mL⁻¹ at 70, 80, and 90 °C, respectively. However, the influence of DHPM pressures on the antigenic response of β-Lg standards was different. DHPM modified β-Lg standards showed a remarkable increase in antigenicity when treated to 80 MPa. Above 80 MPa, the antigenic response decreased.     

Enzymatic hydrolysis combined with high‐pressure homogenisation for the preparation of polysaccharide‐based nanoparticles from the by‐product of Flammulina velutipes

In this study, protease, α‐amylase and 5‰ β‐glucanase enzymolysis in combination with high‐pressure homogenisation were used for the preparation of polysaccharide‐based nanoparticles from Flammulina velutipes stipes, respectively, named FNP‐1, FNP‐2 and FNP‐3, and the nanoparticles were subsequently characterised. The FNP size distribution ranged from 50 nm to 300 nm, among which FNP‐2 and FNP‐3 were smaller than FNP‐1, based on the SEM images. GC‐MS results showed that these particles were mainly composed of glucose and glucosamine. The FNP dispersions at 1 wt% behaved as non‐Newtonian, shear‐thinning fluids, and the FNP‐3 dispersion presented superior viscoelasticity. With an increasing degree of enzymolysis, the thermal stability of the FNPs decreased. In addition, these particles presented various cation‐exchange properties. Therefore, the Flammulina velutipes polysaccharide‐based nanoparticles obtained from this study can be potentially used as a promising functional food ingredient in the food industry.     

Co-production of Lactic Acid and <Emphasis Type="Italic">Lactobacillus rhamnosus</Emphasis> Cells from Whey Permeate with Nutrient Supplements

Lactic acid and cell production from whey permeate by Lactobacillus rhamnosus with different nutrient supplements were investigated in this study. Yeast extract was identified as the most effective nutrient affecting lactic acid production. Increase in inoculum size from 0.05% to 1% (v/v) resulted in a substantial increase in lactic acid productivity from 0.66 to 0.83 g L⁻¹ h⁻¹ (P < 0.001). The optimal temperature for lactic acid production was 37 °C, while the highest cell production was obtained at 42 °C. When whey permeate and yeast extract concentrations were 6.8% (w/v) and 3 g L⁻¹, respectively, lactic acid productivity reached 0.85 g L⁻¹ h⁻¹ after 48-h cultivation, which is 3.40 times of those without nutrient supplements.