Hydrogen storage performance of 5LiBH4 + Mg2FeH6 composite system

The hydrogen storage properties of 5LiBH₄ + Mg₂FeH₆ reactive hydride composites for reversible hydrogen storage were investigated by comparing with the 2LiBH₄ + MgH₂ composite in the present work. The dehydrogenation pathway and reaction mechanism of 5LiBH₄ + Mg₂FeH₆ composite were also investigated and elucidated. The self-decomposition of Mg₂FeH₆ leads to the in situ formation of Mg and Fe particles on the surface of LiBH₄, resulting in a well dispersion between different reacting phases. The formation of FeB is observed during the dehydrogenation of 5LiBH₄ + Mg₂FeH₆ composite, which might supplies nucleation sites of MgB₂ during the dehydrogenation process, but is not an ascendant catalyst for the self-decomposition of LiBH₄. And FeB can also transform to the LiBH₄ and Fe by reacting with LiH and H₂ during the rehydrogenation process. The dehydrogenation capacity for 5LiBH₄ + Mg₂FeH₆ composite still gets to 6.5 wt% even after four cycles. The X-ray diffraction analyses reveal the phase transitions during the hydriding and dehydriding cycle. The formed FeB in the composite maintains a nanostructure after four hydriding-dehydriding cycles. The loss of hydrogen storage capacity and de-/rehydrogenation kinetics can be attributed to the incomplete generation of Mg₂FeH₆ during the rehydrogenation process.     

Hydrogen storage behavior of 2LiBH4/MgH2 composites improved by the catalysis of CoNiB nanoparticles

2LiBH₄/MgH₂ system is a representative and promising reactive hydride composite for hydrogen storage. However, the high desorption temperature and sluggish desorption kinetics hamper its practical application. In our present report, we successfully introduce CoNiB nanoparticles as catalysts to improve the dehydrogenation performances of the 2LiBH₄/MgH₂ composite. The sample with CoNiB additives shows a significant desorption property. Temperature programmed desorption (TPD) measurement demonstrates that the peak decomposition temperatures of MgH₂ and LiBH₄ are lowered to be 315 °C and 417 °C for the CoNiB-doped 2LiBH₄/MgH₂. Isothermal dehydrogenation analysis demonstrates that approximately 10.2 wt% hydrogen can be released within 360 min at 400 °C. In addition, this study gives a preliminary evidence for understanding the CoNiB catalytic mechanism of 2LiBH₄/MgH₂     

Improved reversible dehydrogenation of LiBH4–MgH2 composite by the synergistic effects of Al and MgO

In this paper, we report a novel method of improving the reversible dehydrogenation properties of the 2LiBH₄–MgH₂ composite. Our study found that mechanically milling with small amount of Al powder can markedly shorten or even eliminate the problematic incubation period that interrupts the dehydrogenation steps of the 2LiBH₄–MgH₂ composite. But the resulting composite showed serious kinetics degradation upon cycling. In an effort to solve this problem, we found that combined usage of small amounts of Al and MgO enabled the 2LiBH₄–MgH₂ composite to rapidly and reversibly deliver around 9 wt% hydrogen at 400 °C under 0.3 MPa H₂, which compares favorably with the dehydrogenation performance of the composites with transition-metal additives. A combination of phase/microstructural analyses and series of control experiments has been conducted to gain insight into the promoting effects of Al and MgO. It was found that Al and MgO additives act as precursor and promoter for the formation of AlB₂ heterogeneous nucleation sites, respectively.     

Combined effects of hydrogen back-pressure and NbF5 addition on the dehydrogenation and rehydrogenation kinetics of the LiBH4–MgH2 composite system

It is well known that the dehydrogenation pathway of the LiBH₄–MgH₂ composite system is highly reliant on whether decomposition is performed under vacuum or a hydrogen back-pressure. In this work, the effects of hydrogen back-pressure and NbF₅ addition on the dehydrogenation kinetics of the LiBH₄–MgH₂ system are studied under either vacuum or hydrogen back-pressure, as well as the subsequent rehydrogenation and cycling. For the pristine sample, faster desorption kinetics was obtained under vacuum, but the performance is compromised by slow absorption kinetics. In contrast, hydrogen back-pressure remarkably promotes the absorption kinetics and increases the reversible hydrogen storage capacity, but with the penalty of much slower desorption kinetics. These drawbacks were overcome after doping with NbF₅, with which the dehydrogenation and rehydrogenation kinetics was significantly improved. In particular, the enhanced kinetics was observed to persist well, even after 9 cycles, in the case of the NbF₅ doped sample under hydrogen back-pressure, as well as the suppression of forming Li₂B₁₂H₁₂. Furthermore, the mechanism that is behind these effects of NbF₅ additive on the reversible dehydrogenation reaction of the LiBH₄–MgH₂ system is discussed.     

Enhanced dehydrogenation properties of LiBH4 compositing with hydrogenated magnesium-rare earth compounds

LiBH₄ is regarded as a promising hydrogen storage material due to its high hydrogen density. In this study, the dehydrogenation properties of LiBH₄ were remarkably enhanced by doping hydrogenated Mg₃RE compounds (RE denotes La, Ce, Nd rare earth metals), which are composed of nanostructured MgH₂ and REH_2+x (denoted as H − Mg₃RE). For the LiBH₄ + H − Mg₃La mixture, the component LiBH₄ desorbed 6 wt.% hydrogen even at a relatively low temperature of 340 °C, far lower than the desorption temperature of pure LiBH₄ or the 2LiBH₄ + MgH₂ system. This kinetic improvement is attributed to the hydrogen exchange mechanism between the H − Mg₃La and LiBH₄, in the sense that the decomposition of MgH₂ and LaH_2+x catalyzed the dehydrogenation of LiBH₄ through hydrogen exchange effect rather than mutual chemical reaction requiring higher temperature and hydrogen pressure. However, prior to fast hydrogen release, the hydrogen exchange effect suppressed the dehydriding of MgH₂ and elevated its desorption temperature. It is expected to strengthen the hydrogen exchange effect by compositing the LiBH₄ with other nanosized metal hydrides and to obtain better dehydrogenation properties.     

Hydrogen sorption in MgH2-based composites: The role of Ni and LiBH4 additives

In the present work we investigate the hydrogen sorption properties of composites in the MgH₂–Ni, MgH₂–Ni–LiH and MgH₂–Ni–LiBH₄ systems and analyze why Ni addition improve hydrogen sorption rates while LiBH₄ enhance the hydrogen storage capacity. Although all composites with Ni addition showed significantly improved hydrogen storage kinetics compared with the pure MgH₂, the fastest hydrogen sorption kinetics is obtained for Ni-doped MgH₂. The formation of Mg₂Ni/Mg₂NiH₄ in Ni-doped MgH₂ composite and its microstructure allows to uptake 5.0 wt% of hydrogen in 25 s and to release it in 8 min at 275 °C. In the MgH₂–Ni–LiBH₄ composite, decomposition of LiBH₄ occurs during the first dehydriding leading to the formation of diborane, which has a Ni catalyst poison effect via the formation of a passivating boron layer. A combination of FTIR, XRD and volumetric measurements demonstrate that the formation of MgNi₃B₂ in the MgH₂–Ni–LiBH₄ composite happens in the subsequent hydriding cycle from the reaction between Mg₂Ni/Mg₂NiH₄ and B. Activation energy analysis demonstrates that the presence of Ni particles has a catalytic effect in MgH₂–Ni and MgH₂–Ni–LiH systems, but it is practically nullified by the addition of LiBH₄. The beneficial role of LiBH₄ on the hydrogen storage capacity of the MgH₂–Ni–LiBH₄ composite is discussed.     

Hydrogen storage performance of 2LiH + MgB2 doped with hydrothermal-synthesized ZrO2 nanorods

In this study, we synthesized ZrO₂ nanorods through a hydrothermal process as a catalyst precursor for the reversible hydrogen storage reaction between 2LiH + MgB₂ and 2LiBH₄ + MgH_2. The 2LiH + MgB₂ composites doped with the ZrO₂ nanorods demonstrated superior and stable hydriding/dehydriding kinetics upon cycling. The XRD, SEM and HRTEM results revealed that the doped ZrO₂ nanorods were transformed into ZrB₂ nanoparticles with a size of a few nanometers during the first hydrogenation. The initial nanosize of the ZrO₂ catalyst precursor accounted for the formation of extremely fine ZrB₂ nanoparticles, which acted as heterogeneous nuclei of MgB₂. The present study provides a new route for performance enhancement of complex hydride composites through manipulating the nanostructure of catalysts.     

Effect of LiBH4 on hydrogen storage property of MgH2

The effect of lithium borohydride (LiBH₄) on the hydriding/dehydriding kinetics and thermodynamics of magnesium hydride (MgH₂) was investigated. It was found that LiBH₄ played both positive and negative effects on the hydrogen sorption of MgH₂. With 10 mol.% LiBH₄ content, MgH₂–10 mol.% LiBH₄ had superior hydrogen absorption/desorption properties, which could absorb 6.8 wt.% H within 1300 s at 200 °C under 3 MPa H₂ and completed desorption within 740 s at 350 °C. However, with the increasing amount of LiBH₄, the hydrogenation/dehydrogenation kinetics deteriorated, and the starting desorption temperature increased and the hysteresis of the pressure-composition isotherm (PCI) became larger. Our results showed that the positive effect of LiBH₄ was mainly attributed to the more uniform powder mixture with smaller particle size, while the negative effect of LiBH₄ might be caused by the H–H exchange between LiBH₄ and MgH₂.     

Desorption properties of MgH2 composite with a composition of 40MgH2 + 37LiBH4 + 18MgF2 + 5Ti isopropoxide

In order to increase the hydrogen storage capacity of Mg-based materials, a mixture with a composition of 2LiBH₄ + MgF₂ and LiBH₄, which has a hydrogen storage capacity of 18.4 wt%, were added to MgH₂. Ti isopropoxide was also added to MgH₂ as a catalyst. A MgH₂ composite with a composition of 40 wt%MgH₂ + 25 wt%LiBH₄ + 30 wt% (2LiBH₄ + MgF₂) + 5 wt%Ti isopropoxide (corresponding to 40 wt%MgH₂ + 37 wt%LiBH₄ + 18 wt%MgF₂ + 5 wt%Ti isopropoxide) was prepared by reactive mechanical grinding. The hydrogen storage properties of the sample were then examined. Hydrogen content vs. desorption time curves for consecutive 1st desorptions of 40 wt%MgH₂ + 37 wt%LiBH₄ + 18 wt%MgF₂ + 5 wt%Ti isopropoxide from room temperature to 823 K showed that the total desorbed hydrogen quantity for consecutive 1st desorptions was 8.30 wt%.     

The hydrogen storage properties and reaction mechanism of the MgH2-NaAlH4 composite system

In this study, we report the hydrogen absorption/desorption properties and reaction mechanism of the MgH₂-NaAlH₄ (4:1) composite system. This composite system showed improved dehydrogenation performance compared with that of as-milled NaAlH₄ and MgH₂ alone. The dehydrogenation process in the MgH₂-NaAlH₄ composite can be divided into four stages: NaAlH₄ is first reacted with MgH₂ to form a perovskite-type hydride, NaMgH₃ and Al. In the second dehydrogenation stage, the Al phase reacts with MgH₂ to form Mg₁₇Al₁₂ phase accompanied with the self-decomposition of the excessive MgH₂. NaMgH₃ goes on to decompose to NaH during the third dehydrogenation stage, and the last stage is the decomposition of NaH. Kissinger analysis indicated that the apparent activation energy, E_A, for the MgH₂-relevent decomposition in MgH₂-NaAlH₄ composite was 148 kJ/mol, which is 20 kJ/mol less than for as-milled MgH₂ (168 kJ/mol). X-ray diffraction patterns indicate that the second, third, and fourth stages are fully reversible. It is believed that the formation of Al₁₂Mg₁₇ phase during the dehydrogenation process alters the reaction pathway of the MgH₂-NaAlH₄ (4:1) composite system and improves its thermodynamic properties.     

Hydrogen generation from the ball milled composites of sodium and lithium borohydride (NaBH4/LiBH4) and magnesium hydroxide (Mg(OH)2) without and with the nanometric nickel (Ni) additive

The composites of (NaBH₄+2Mg(OH)₂) and (LiBH₄+2Mg(OH)₂) without and with nanometric Ni (n-Ni) added as a potential catalyst were synthesized by high energy ball milling. The ball milled NaBH₄-based composite desorbs hydrogen in one exothermic reaction in contrast to its LiBH₄-based counterpart which dehydrogenates in two reactions: an exothermic and endothermic. The NaBH₄-based composite starts desorbing hydrogen at 240 °C. Its ball milled LiBH₄-based counterpart starts desorbing at 200 °C. The latter initially desorbs hydrogen rapidly but then the rate of desorption suddenly decelerates. The estimated apparent activation energy for the NaBH₄-based composite without and with n-Ni is equal to 152 ± 2.2 and 157 ± 0.9 kJ/mol, respectively. In contrast, the apparent activation energy for the initial rapid dehydrogenation for the LiBH₄-based composite is very low being equal to 47 ± 2 and 38 ± 9 kJ/mol for the composite without and with the n-Ni additive, respectively. XRD phase studies after volumetric isothermal dehydrogenation tests show the presence of NaBO₂ and MgO for the NaBH₄-based composite. For the LiBH₄-based composite phases such as MgO, Li₃BO₃, MgB₂, MgB₆ are the products of the first exothermic reaction which has a theoretical H₂ capacity of 8.1 wt.%. However, for reasons which are not quite clear, the first reaction never goes to full completion even at 300 °C desorbing ∼4.5 wt.% H₂ at this temperature. The products of the second endothermic reaction for the LiBH₄-based composite are MgO, MgB₆, B and LiMgBO₃ and the reaction has a theoretical H₂ capacity of 2.26 wt.%. The effect of the addition of 5 wt.% nanometric Ni on the dehydrogenation behavior of both the NaBH₄-and LiBH₄-based composites is rather negligible. The n-Ni additive may not be the optimal catalyst for these hydride composite systems although more tests are required since only one n-Ni content was examined.     

A comparative study of LiBH4-based composites with metal hydrides and fluorides for hydrogen storage

A comparative study was performed on four LiBH₄-based hydrogen storage composites 2LiBH₄ + MgX₂ and 6LiBH₄ + CaX₂ (X = H and F). The composites with fluorides and those with corresponding hydrides exhibited similar hydrogen storage properties. The dehydrogenation of 2LiBH₄ + MgF₂ demonstrated a strong dependence on the hydrogen back pressure, similar to that of 2LiBH₄ + MgH₂. The reversible hydrogen storage of 2LiBH₄ + MgF₂ was achieved under a back pressure of 5 bar at 450 °C. Dehydrogenation under lower H₂ pressures resulted in the production of Mg and thus a partial reversibility. In contrast, both 6LiBH₄ + CaH₂ and 6LiBH₄ + CaF₂ revealed reversible hydrogen storage properties regardless of the hydrogen back pressure. The structural difference between MgB₂ and CaB₆ may account for the observed differences in hydrogen storage properties of the Mg- and Ca-containing LiBH₄ reactive composites.     

Improved hydrogen storage reversibility of LiBH4 destabilized by Y(BH4)3 and YH3

In the present study, the synthesis of two different LiBH₄–Y(BH₄)₃ and LiBH₄–YH₃ composites was performed by mechanochemical processing of the 4LiBH₄–YCl₃ mixture and as-milled 4LiBH₄–YCl₃ plus 3LiH. It was found that Y(BH₄)₃ and YH₃ formed in situ during milling are effective to promote LiBH₄ destabilization but differ substantially from each other in terms of the dehydrogenation pathway. During LiBH₄–Y(BH₄)₃ dehydriding, Y(BH₄)₃ decomposes first generating in situ freshly YH₃ and subsequently, it destabilizes LiBH₄ with the formation of minor amounts of YB₄. About 20% of the theoretical hydrogen storage was obtained via the rehydriding of YB₄–4LiH–3LiCl at 400 °C and 6.5 MPa. As a novel result, a compound containing (B₁₂H₁₂)²⁻ group was identified during dehydriding of Y(BH₄)₃. In the case of 4LiBH₄–YH₃ dehydrogenation, the increase of the hydrogen back pressure favors the formation of crystalline YB_4, whereas a reduction to ≤0.1 MPa induces the formation of minor amounts of Li₂B₁₂H₁₂. Although for hydrogen pressures ≤0.1 MPa direct LiBH₄ decomposition can occur, the main dehydriding pathway of 4LiBH₄–YH₃ composite yields YB₄ and LiH. The nanostructured composite obtained by mechanochemical processing gives good hydrogen storage reversibility (about 80%) regardless of the hydrogen back pressure.     

Effect of carbon addition on hydrogen storage behaviors of Li–Mg–B–H system

Various carbon additives were mechanically milled with LiBH₄/MgH₂ composite and their hydrogen storage behaviors were investigated. It was found that most of the carbon additives exhibited prominent effect on the host material. Among the various carbon additives, purified single-walled carbon nanotubes (SWNTs) exhibited the most prominent effect on the kinetic improvement and cyclic stability of Li–Mg–B–H system. Results show that LiBH₄/MgH₂ composite milled with 10 wt.% purified SWNTs additive can release nearly 10 wt.% hydrogen within 20 min at 450 °C, which is about two times faster than that of the neat LiBH₄/MgH₂ sample. On the basis of hydrogen storage behavior and structure/phase investigations, the possible mechanism involved in the property improvement upon carbon additives was discussed.     

Improved reversible dehydrogenation properties of 2LiBH4–MgH2 composite by milling with graphitic carbon nitride

The 2LiBH₄–MgH₂ reactive hydride composite is a promising hydrogen storage system due to the combined high hydrogen capacity and relatively moderate reaction enthalpy. However, the sluggish de/rehydrogenation kinetics severely impedes its practical applications. In this study, graphitic carbon nitride (C₃N₄) as a metal-free additive was added to the 2LiBH₄–MgH₂ composite and examined with respect to the promoting effect on the hydrogen storage properties of the composite. Our study found that mechanically milling with small amount of C₃N₄ additive can eliminate the incubation period between two dehydrogenation steps and thus markedly enhance the dehydrogenation kinetics of the LiBH₄–MgH₂ composite. Further cyclic study found that the composite with C₃N₄ additive exhibits improved cyclic dehydrogenation property although it also shows capacity loss upon cycling, particularly in the second cycle. Combined dehydrogenation property, phase analysis and a series of designed experiments suggested that the C₃N₄ additive could react with both LiBH₄ and MgH₂ in heating process, and the resulting products may improve the reversible dehydrogenation property of the composite system.     

Reversible hydrogen storage from 6LiBH4-MCl3 (M = Ce, Gd) composites by in-situ formation of MH2

Different destabilized LiBH₄ systems with several interacting components are being explored for hydrogen storage applications. In this study, hydrogen sorption properties of as-milled 6LiBH₄-MCl₃ composites (M = Ce, Gd) are investigated by X-ray diffraction, differential scanning calorimetry and thermovolumetric measurements. The chemical interaction between metal halides and LiBH₄ decreases the dehydrogenation temperature in comparison with as-milled LiBH₄. Hydrogen release starts at 220 °C from the decomposition of M(BH₄)₃ formed during milling and proceeds through destabilization of LiBH₄ by in-situ formed MH₂. The dehydrogenation products CeB₆-LiH and GdB₄-LiH can be rehydrided under moderate conditions, i.e 400 °C and 6.0 MPa of hydrogen pressure for 2 h without catalyst. A new 6LiBH₄-CeCl₃-3LiH composite shows promissory hydrogen storage properties via the formation by milling of CeH_2+x. Our study is the first work about reversible hydrogen storage in LiBH₄-MCl₃ composites destabilized by in-situ formed MH₂.     

Effect of LiH on hydrogen storage property of MgH2

Recent works showed that the addition of LiBH₄ significantly improves the sorption kinetics of MgH₂, and LiH decomposed from LiBH₄ was supposed to play the catalytic effect on MgH₂. In order to clarify this mechanism, the effect of LiH on the hydriding/dehydriding kinetics and thermodynamics of MgH₂ was systematically investigated. The hydrogenation kinetics of LiH-doped samples, as well as the morphology after several cycles, was similar to those of pure MgH₂, which indicate that Li⁺ had no catalytic effect on the hydrogenation of Mg. Moreover, the addition of LiH strongly retarded the hydrogen desorption of MgH₂ doped with/without Nb₂O₅, and resulted in higher starting temperature of desorption, larger activation energy and larger pressure hysteresis of PCI curves of MgH₂. H₂, HD and D₂ were observed in the desorption products of MgH₂-2LiD, which confirms that H–H exchange indeed occurs between MgH₂ and LiH, hence deteriorate desorption kinetics/thermodynamics of MgH_2. The results implied that the additives containing H⁻ could retard the hydrogen desorption of MgH₂ by H–H exchange effect.     

Comprehensive hydrogen storage properties and catalytic mechanism studies of 2LiBH4–MgH2 system with NbF5 in various addition amounts

In the present work, the role of NbF₅ addition amount in affecting the comprehensive hydrogen storage properties (dehydrogenation, rehydrogenation, cycling performance, hydrogen capacity) of 2LiBH₄–MgH₂ system as well as the catalytic mechanism of NbF₅ have been systematically studied. It is found that increasing the addition amount of NbF₅ to the 2LiBH₄–MgH₂ system not only results in dehydrogenation temperature reduction and hydriding–dehydriding kinetics enhancement but also leads to the de/rehydrogenation capacity loss. Compared with other samples, 2LiBH₄–MgH₂ doping with NbF₅ in weight ratios of 40:4 exhibits superior comprehensive hydrogen storage properties, which can stably release ∼8.31 wt.% hydrogen within 2.5 h under 4 bar H₂ and absorb ∼8.79 wt.% hydrogen within 10 min under 65 bar H₂ at 400 °C even up to 20 cycling. As far as we know, this is the first time that excellent reversibility as high as 20 cycles without obvious degradation tendency in both of hydrogen capacity and reaction rate has been achieved in the 2LiBH₄–MgH₂ system. The further experimental study reveals that the highly catalytic effects of NbF₅ on the 2LiBH₄–MgH₂ system are derived from the reaction between NbF₅ and LiBH₄, which provides a fundamental insight into the catalytic mechanism of NbF₅.     

Improved reversible dehydrogenation properties of LiBH4–MgH2 composite by tailoring nanophase structure using activated carbon

In this study, activated carbon (AC) was added to the 2LiBH₄–MgH₂ composite and examined with respect to its effect on the hydrogen storage properties of the system. Our study found that AC is an effective additive for promoting the reversible dehydrogenation of the 2LiBH₄–MgH₂ composite. A series of control experiments were carried out to optimize the sample preparation method, milling time and addition amount of AC. In comparison with the neat LiBH₄–MgH₂ system, the LiBH₄–MgH₂–AC composite prepared under optimized conditions exhibits enhanced dehydrogenation kinetics, improved cyclic stability and particularly, eliminated incubation period between the two dehydrogenation stages. A combination of phase/microstructure/chemical state analyses has been conducted to gain insight into the promoting effect of AC on the reversible dehydrogenation of the 2LiBH₄–MgH₂ system. Our study found that AC exerts its promoting effect via tailoring nanophase structure of the 2LiBH₄–MgH₂ composite.     

Enhanced hydrogen storage properties of 4MgH2 + LiAlH4 composite system by doping with Fe2O3 nanopowder

In this paper, the hydrogen storage properties and reaction mechanism of the 4MgH₂ + LiAlH₄ composite system with the addition of Fe₂O₃ nanopowder were investigated. Temperature-programmed-desorption results show that the addition of 5 wt.% Fe₂O₃ to the 4MgH₂ + LiAlH₄ composite system improves the onset desorption temperature to 95 °C and 270 °C for the first two dehydrogenation stage, which is lower 40 °C and 10 °C than the undoped composite. The dehydrogenation and rehydrogenation kinetics of 5 wt.% Fe₂O₃-doped 4MgH₂ + LiAlH₄ composite were also improved significantly as compared to the undoped composite. Differential scanning calorimetry measurements indicate that the enthalpy change in the 4MgH₂–LiAlH₄ composite system was unaffected by the addition of Fe₂O₃ nanopowder. The Kissinger analysis demonstrated that the apparent activation energy of the 4MgH₂ + LiAlH₄ composite (125.6 kJ/mol) was reduced to 117.1 kJ/mol after doping with 5 wt.% Fe₂O₃. Meanwhile, the X-ray diffraction analysis shows the formation of a new phase of Li₂Fe₃O₄ in the doped composite after the dehydrogenation and rehydrogenation process. It is believed that Li₂Fe₃O₄ acts as an actual catalyst in the 4MgH₂ + LiAlH₄ + 5 wt.% Fe₂O₃ composite which may promote the interaction of MgH₂ and LiAlH₄ and thus accelerate the hydrogen sorption performance of the MgH₂ + LiAlH₄ composite system.