Very efficient dehydrogenation of methanolysis reaction with nitrogen doped Chlorella Vulgaris microalgae carbon as metal-free catalysts

In this study, nitrogen (N) doped metal-free catalysts were obtained as a result of nitric acid (HNO₃) activation of carbon sample (C–KOH–N), which was obtained based on Chlorella Vulgaris microalgae by KOH activation (C–KOH). These catalysts have been effectively used to produce hydrogen (H₂) from the sodium borohydride (NaBH₄) methanolysis reaction. Compared to the C–KOH catalyst, the catalytic activity for C–KOH–N showed a seven-fold improvement. Hydrogen generation rate (HGR) values obtained for the NaBH₄ methanolysis reaction for C–KOH and C–KOH–N metal-free catalysts were 3250 and 20,100 mL min^?1 g^?1. The catalysts were characterized using various analytical techniques such as XPS, XRD, SEM, FTIR, BET, and elemental analysis. This work can provide a new alternative strategy to produce specific heteroatom-doped metal-free carbon catalysts for environmentally friendly conversion to produce H₂ efficiently.     

Metal-free catalyst fabrication by incorporating oxygen groups on the surface of the carbonaceous sample and efficient hydrogen production from NaBH4 methanolysis

In the present study, metal-free catalysts for efficient H₂ generation from NaBH₄ methanolysis was produced for the first time from apricot kernel shells with two-step activation. The first stage of the two-stage activation includes the production of activated carbon with the KOH agent (AKOH), and the second stage includes hydrothermally HNO₃ activation with oxygen doping (O doped AKOH + N). The hydrogen production rate (HGR) and the activation energy (Ea) of the reaction with the obtained metal-free catalyst (10 mg) were determined as 14,444 ml min^?1 g^?1 and 7.86 kJ mol^?1, respectively. The structural and physical-chemical properties of these catalysts were characterized by XRD (X-ray diffraction), SEM (scanning electron microscopy), elemental CHNS analysis, FT-IR (Fourier transform infrared spectroscopy), and nitrogen adsorption analysis. Also, the reusability results of this metal-free catalyst for H₂ production are promising.     

Metal-free catalysts with phosphorus and oxygen doped on carbon-based on Chlorella Vulgaris microalgae for hydrogen generation via sodium borohydride methanolysis reaction

Metal-free catalysts (C–KOH–P) containing phosphorus (P) and oxygen (O) prepared by the modification with phosphoric acid (H₃PO₄) of activated carbon (C–KOH) obtained by activation of Chlorella Vulgaris microalgae with potassium hydroxide (KOH) were investigated for the hydrogen (H₂) generation reaction from methanolysis of sodium borohydride (NaBH₄). Elemental analysis, XRD, FTIR, ICP-MS, and nitrogen adsorption were used to analyze the characteristics of metal-free catalysts. The results showed that groups containing O and P were attached to the carbon sample. In the study, the hydrogen production rates (HGR) obtained with metal-free C–KOH and C–KOH–P catalysts were 3250 and 10,263 mL/min/g, respectively. These HGR values are better than most values obtained for many catalysts presented in the literature. Besides, relatively low activation energy (Ea) of 27.9 kJ/mol was obtained for this metal-free catalyst. The C–KOH–P metal-free catalyst showed ideal reusability with 100% conversion and a partial reduction in the H₂ production studies of NaBH₄ methanolysis after five consecutive uses.     

Sulphur and nitrogen-doped metal-free microalgal carbon catalysts for very active dehydrogenation of sodium borohydride in methanol

Micro algae based on Spirulina platensis is successfully used for the synthesis of S and N-doped metal-free carbon materials. The procedure consists of three stages; (i) Activated carbon production by KOH activation in CO₂ atmosphere (S-AC), (ii) S atom doping to the obtained S-AC using sulphuric acid by hydrothermal activation (S-AC-S), (iii) N atom doping by hydrothermal activation to S-AC obtained using nitric acid (S-AC-S-N). The S and N doped metal-free catalysts are used for H₂ release in NaBH₄ methanolysis reaction (NaBH₄-MR) for the first time. The metal-free carbon catalysts are characterized by X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM-EDS), X-ray diffractometer spectroscopy (XRD), Fourier-transform infrared spectroscopy (FTIR), nitrogen adsorption and elemental analysis (CHNS) methods. When the HGR values obtained for S-AC-S-N (26,000 mL min^?1 g^?1) and S-AC (2641 mL min^?1 g^?1) are compared, there is a 9.84-fold increase. Activation energy (Ea) value for S-AC-S-N was 10.59 kJ mol^?1.     

Phosphorus and oxygen doped carbon-based on Spirulina microalgae as efficient metal-free catalysts to obtain H2 from methanolysis of NaBH4

Metal-free catalysts (SP–KOH–P) doped phosphorus and oxygen as a result of modification with H₃PO₄ to the surface of the activated carbon sample (SP–KOH) obtained by activation of KOH with Spirulina microalgae were used to obtain hydrogen (H₂) from methanolysis of NaBH₄. The characteristic structure of SP-KOH-P and SP-KOH metal-free catalysts were examined by XRD, TEM, elemental analysis, FTIR, and ICP-MS. The effects of the amount of catalyst, NaBH₄ concentration, reusability, and temperature on H₂ production rate from NaBH₄ methanolysis reaction were investigated. The hydrogen production rate (HGR) obtained with 25 mg SP-KOH-P was found to be 19,500 mL min^?1 g^?1. The activation energy (Ea) value of SP-KOH-P metal-free catalyst sample was calculated as 38.79 kJ mol^?1.     

Metal-free hybrid composite particles with phosphorus and oxygen-doped graphitic carbon nitride dispersed on kaolin for catalytic activity toward efficient hydrogen release

Here, hybrid kaolin-g-C₃N₄ heterostructure particles were fabricated by calcination in the first step, followed by hydrothermal phosphoric acid activation in the second step, and phosphorus (P) and oxygen (O) doped kaolin-g-C₃N₄ metal-free catalyst was synthesized. This hybrid metal-free catalyst was used for the first time for the production of effective hydrogen (H₂) from sodium borohydride (NaBH₄) methanolysis. The hydrogen generation rate (HGR) value of 5500 ml min⁻¹g⁻¹ was obtained with the P and O doped kaolin-g-C₃N₄ catalyst. The activation energy (Ea) of 31.90 kJ mol⁻¹ by P and O doped kaolin-g-C₃N₄ for the production of H₂ was obtained. The kaolin-g-C₃N₄ and P and O doped kaolin-g-C₃N₄ metal-free catalysts were systematically characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). Based on the results obtained, the mechanism of P and O-doped kaolin-g-C₃N₄ catalyst on H₂ production from NaBH₄ methanolysis was also proposed.     

g-C3N4 particles with boron and oxygen dopants/carbon vacancies for efficient dehydrogenation in sodium borohydride methanolysis

In the study, metal-free boron and oxygen incorporated graphitic carbon nitride (B and O doped g-C₃N₄) with carbon vacancy was successfully prepared and applied as a catalyst to the dehydrogenation of sodium borohydride (NaBH₄) in methanol for the first time. The hydrogen generation rate (HGR) value was found to be 11,600 mL min^?1g^?1 by NaBH₄ of 2.5%. This is 2.53 times higher than the g-C₃N₄ catalyst without the addition of B and O. The obtained activation energy was 25.46 kJ mol^?1. X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), energy dispersive X-Ray analyser (EDX), Transmission electron microscopy (TEM) and Fourier-transform infrared spectroscopy (FTIR) analyses for characterization were performed. A possible mechanism of H₂ production from the reaction using metal-free B and O doped g-C₃N₄ catalyst with carbon vacancy has been proposed. This study showed that g-C₃N₄ and its composites with doping atoms can be used effectively in H₂ production by NaBH₄ methanolysis.     

Phosphorus doped carbon nanodots particles based on pomegranate peels for highly active dehydrogenation of sodium borohydride in methanol

Here, the carbon nanodots were successfully synthesized from pomegranate peels (PPCD). This obtained PPCD was treated by a hydrothermal process with phosphoric acid for P doping (P doped PPCD) and used as a metal-free catalyst to obtain hydrogen(H₂) from sodium borohydride (NaBH₄) methanolysis for the first time. The characteristics of the samples obtained by ultraviolet, fluorescence, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM) and Inductively coupled plasma mass spectrometry (ICP-MS) analyses were examined. NaBH₄ concentration effect, temperature effect and catalyst reusability experiments were carried out. Using 10 mg of the catalyst with 2.5% NaBH₄, an HGR value of 13000 mL min^?1g^?1 was obtained. The activation energy (Ea) for the P-doped PPCD catalyst was 30.96 kJ mol^?1.     

Surface modification of graphitic carbon nitride nanoparticles with B,O and S doping/carbon vacancy for efficient dehydrogenation of sodium borohydride in methanol

Herein, the surface properties of graphitic carbon nitride (GCN) with sulphur(S), boron (B) and oxygen (O) dopants were improved. The heteroatom-doped metal-free GCN exhibited both rich surface functional groups and a carbon defect structure. These metal-free catalysts were used to obtain hydrogen (H₂) from the sodium borohydride (SB) methanolysis for the first time. Compared to GCN, S, B, and O doped GCN catalyst obtained showed a 2.2-fold improvement in H₂ production. HGR value obtained with B, O and S doped GCN (10 mg) via SB of 2.5% was 9166 ml min ⁻¹g⁻¹. XPS, SEM-EDX, TEM, FTIR, and XRD analyses were used for the structural properties of catalysts. The activation energy (Ea) for B, O and S doped GCN was 28.89 kJ mol⁻¹.     

Chlorella vulgaris microalgae strain modified with zinc chloride as a new support material for hydrogen production from NaBH4 methanolysis using CuB,NiB, and FeB metal catalysts

This study aims to produce hydrogen (HG) from sodium borohydride (NaBH₄) methanolysis using CuB, NiB or FeB catalysts prepared with a different support material including C. vulgaris microalgae strain modified using zinc chloride (CMS-ZnCl₂). The NaBH₄ concentration, metal percentage in the supported-catalyst, the optimal ZnCl₂ percentage, and temperature effect on the NaBH₄ methanolysis were investigated. X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), and Scanning electron microscopy (SEM) analysis were performed for the CMS-ZnCl₂-CuB characterization. Also, the low activation energy (Ea) of 22.71 kJ mol⁻¹ was found with the supported catalyst obtained. Under the same conditions, nearly 100% conversion was achieved in the reusability experiments repeated five times, but a gradual decrease in catalytic activity was observed after each use.     

Evaluating organic waste sources (spent coffee ground) as metal-free catalyst for hydrogen generation by the methanolysis of sodium borohydride

In this study, organic waste sources (spent coffee ground (SCG)) is used as metal-free catalyst in comparison with conventional noble-metal catalyst materials for hydrogen generation based on the methanolysis of sodium borohydride solution. Spent coffee ground (SCG) is used as a metal-free catalyst for the first time as treated with different chemicals. The aim is to synthesize the metal-free catalyst that can be used for the production of hydrogen, a renewable energy source. SCG, which was collected from coffee shops, was used for preparing the catalyst. To produce hydrogen by sodium borohydride (NaBH₄) methanolysis, SCG is pretreated with different chemical agents (H₃PO₄, KOH, ZnCl₂). According to the acid performances, the choice of phosphoric acid was evaluated at different mixing ratios (10%, 20%, 30%, 40%, 50%, 100%) (w/w), different temperatures (200, 300 and 400 °C) and burning times (30, 45, 60 and 90 min) for the optimization of SCG-catalyst. A detailed characterization of the samples were carried out with the aid of FTIR, SEM, XRD and BET analysis. In this study, the experiments were generally carried out effectively under ambient temperature conditions in10 ml methanol solution containing 0.025 g NaBH₄ and 0.1 g of the catalyst. The hydrogen obtained in the experimental studies was determined volumetrically by the gas measurement system. When evaluating the hydrogen volume, different NaBH₄ concentrations, catalyst amount and different temperature effects were investigated. The effect of the amount of NaBH₄ was investigated with 1%, 2.5%, 5%, and 7.5% ratio of NaBH₄ while the influence of the concentration of catalyst was carried-out at 0.05, 0.1, 0.15, and 0.25 g catalysts. Four different temperatures were tested (20, 30, 40, 50 and 60 °C) to explore the performance of the catalyst under different temperatures. The experiments by using SCG-catalyst treated with H₃PO₄ reveal that the best acid ratio was 100% H₃PO₄. The maximum hydrogen production rate with the use of SCG-catalyst for the methanolysis of NaBH₄ was found to be 8335.5 mL min⁻¹gcat⁻¹. Also, the activation energy was determined to be 9.81 kJ mol⁻¹. Moreover, it was discovered that there was no decline in the percentage of converted catalyst material.     

Poly (acrylic acid)/polysaccharides IPN derived metal free catalyst for rapid hydrogen generation via NaBH4 methanolysis

Polymeric catalysts have displayed great performance for catalytic hydrogen generation. However, the reported metal free polymeric catalysts for NaBH₄ methanolysis are mainly limited to coating strategy where the catalytic activity fade after few cycles. Herein, we report an interpenetrating polymer network (IPN) strategy for rapid and highly recyclable NaBH₄ catalytic methanolysis to produce hydrogen (H₂) gas. In this study, we prepared poly(acrylic acid)/polysaccharide IPN via Pickering tempted polymerization. The hydrogen generation performance was studied employing different parameters where maximum HGR of 8182 mL H₂ min^?1 g^?1 of CAP. The activation energy Ea, enthalpy and entropy were calculated to be 62.99 kJ mol^?1, 32.25 kJ mol and ?130.92 J mol K^?1, respectively. Above all, CAP kept cyclic performance to 100% even at the 7th cycle. We confirmed the reproducibility of approach with other natural polysaccharides. This was due to strong chain entanglement of IPN synthesis which forces the active sites to stay in place during cyclic catalysis reaction. Thus, the IPN strategy ensures longer catalyst life for catalytic methanolysis of NaBH₄ for H₂ generation.     

A novel hazelnutt bagasse based activated carbon as sodium borohydride methanolysis and electrooxidation catalyst

In this study, activated carbon is produced from defatted hazelnut bagasse at different activation conditions. The catalytic activities of activated carbons are evaluated for NaBH₄ methanolysis and electrooxidation. These materials are characterized by N₂ adsorption-desorption, FTIR, SEM-EDS and XPS and results show that these materials are prepared successfully. N₂ adsorption-desorption results reveal that activated carbon (FH3-500) has the highest BET surface area as 548 m²/g, total pore volume as 0.367 cm³/g and micropore volume as 0.205 cm³/g. On the orher hand, as a result of hydrogen production studies, FH3-500 activated carbon catalyst has the highest initial hydrogen production rate compared to other materials. At 50 °C, this metal-free activated carbon catalyst has a high initial hydrogen production rate of 13591.20 mL/min.g_cat, which is higher than literature values. Sodium borohydride electrooxidation measurements reveal that FH2-500 also has the highest electrocatalytic activity and stability. Hazelnut pulp-based activated carbons are firstly used as a metal-free catalyst in the methanolysis and electrooxidation of sodium borohydride, and its catalytic activity is good as a metal-free catalyst. The results show that the hazelnut pulp-based activated carbon catalyst is promising as a metal-free catalyst for the methanolysis and electrooxidation of sodium borohydride.     

Catalytic performance of CH4–CO2 reforming over metal free nitrogen-doped biomass carbon catalysts: Effect of different preparation methods

A series of nitrogen doped biomass carbon catalysts were prepared through two different nitrogen doped methods by using soybean meal as the raw material, melamine as nitrogen source and KOH as the activators. The catalysts were characterized by BET, SEM, CO₂-TPD, EA, FTIR, XPS and Raman. The catalytic performances of CH₄–CO₂ reforming over different samples were also studied. The results show that the preparation method of the catalyst significantly affects the structural characteristics, N content and N species type of the catalyst. The characterization results also show the proportion of pyrrolic-N in the catalyst prepared by in-situ nitrogen doped method (Y-NC) is higher than that in prepared by the post-treatment method (H-NC). Pyrrole-N is more conducive to the adsorption and activation of CO₂. So, the catalyst prepared by in-situ nitrogen doped method has good catalytic activity and stability. The conversion of CH₄ and CO₂ were respectively 40% and 65% at 900 °C after 50 h of CH₄–CO₂ reforming reaction.     

Catalytic activity of metal-free amine-modified dextran microgels in hydrogen release through methanolysis of NaBH4

Polymeric microgels were prepared from dextran (Dex) by crosslinking linear natural polymer dextran with divinyl sulfone (DVS) with a surfactant-free emulsion technique resulting in high gravimetric yield of 78.5 ± 5.3% with wide size distribution. Dex microgels were chemically modified, and then used as catalyst in the methanolysis of NaBH₄ to produce H₂. The chemical modification of Dex microgel was done on epichlorohydrin (ECH)-reacted Dex microgels with ethylenediamine (EDA), diethylenetriamine (DETA), and triethylenetetraamine (TETA) in dimethylformamide (DMF) at 90°C for 12 hours. The modified dextran-TETA microgels were protonated using treatment with hydrochloric acid (HCl) and m-Dex microgels-TETA-HCl was found to be a very efficient catalyst for methanolysis of NaBH₄ to produce H₂. The effects of reaction temperature and NaBH₄ concentration on H₂ generation rates were investigated and m-Dex microgels-TETA-HCl catalyst possessed excellent catalytic performances with 100% conversion and 80% activity at end of 10 consecutive uses and was highly re-generatable with simple HCl treatment. Interestingly, m-Dex microgels-TETA-HCl catalyst can catalyze NaBH₄ methanolysis reaction in a mild temperature range 0 to 35°C with E_a value of 30.72 kJ/mol and in subzero temperature range, −20 to 0°C with E_a value of 32.87 kJ/mol, which is comparable with many catalysts reported in the literature.     

Poly(acrylic acid)-modified silica nanoparticles as a nonmetal catalyst for NaBH4 methanolysis

In the present work, a SiO₂@PAA catalyst for NaBH₄ methanolysis composed of silica nanoparticles modified with poly(acrylic acid) has been developed. The morphology and composition of the prepared SiO₂@PAA catalyst were analyzed with transmission electron microscopy, Fourier transform-infrared spectroscopy, x-ray photoelectron spectroscopy and thermogravimetric analysis. This catalyst showed excellent catalytic performance for methanolysis of NaBH₄. The NaBH₄ methanolysis reaction catalyzed by SiO₂@PAA showed an average hydrogen generation rate 5.5 times as high as the reaction catalyzed by unmodified SiO₂ and 10.6 times as high as the uncatalyzed reaction, respectively. The activation energy for methanolysis of NaBH₄ catalyzed by this SiO₂@PAA catalyst was 24.03 kJ/mol. Moreover, although the catalytic activity of SiO₂@PAA catalyst partially lost after being used, it could be restored after being regenerated by washing with diluted hydrochloric acid solution.     

Very fast H2 production from the methanolysis of NaBH4 by metal‐free poly(ethylene imine) microgel catalysts

The polyethyleneimine (PEI) microgels prepared via microemulsion polymerization are protonated by hydrochloric acid treatment (p‐PEI) and quaternized (q‐PEI) via modification reaction with methyl iodide and with bromo alkanes of different alkyl chain lengths such as 1‐bromoethane, 1‐bromobutane, 1‐bromohexane, and 1‐bromooctane. The bare p‐PEI and q‐PEI microgels are used as catalysts directly without any metal nanoparticles for the methanolysis reaction of sodium borohydride (NaBH₄). Various parameters such as the protonation/quaternization reaction on PEI microgels, the amount of catalyst, the amount of NaBH₄, and temperature are investigated for their effects on the hydrogen (H₂) production rate. The reaction of self‐methanolysis of NaBH₄ finishes in about 32.5 min, whereas the bare PEI microgel as catalyst finishes the methanolysis of NaBH₄ in 22 min. Surprisingly, it is found that when the protonated PEI microgels are used as catalyst, the same methanolysis of NaBH₄ is finished in 1.5 min. The highest H₂ generation rate value is observed for protonated PEI microgels (10 mg) with 8013 mL of H₂/(g of catalyst.min) for the methanolysis of NaBH₄. Moreover, activation parameters are also calculated with activation energy value of 23.7 kJ/mol, enthalpy 20.9 kJ/mol, and entropy ?158 J/K.mol. Copyright © 2016 John Wiley & Sons, Ltd.     

Performance of g-C3N4 nanoparticles by EDTA modification and protonation for hydrogen release from sodium borohydride methanolysis

Here, for the first time, a metal-free catalyst was synthesized by ethylenediamine tetra-acetic acid (EDTA) modification of the carbon nitride (g-C₃N₄) sample and protonation of the obtained sample. The catalyst was used for the production of H₂ from the methanolysis of sodium borohydride (NaBH₄). The EDTA modification and protonation of the g-C₃N₄ sample was confirmed by XRD, FTIR, SEM-EDX, and TEM analyses. During the hydrogen generation, NaBH₄ concentration effect, catalyst amount effect, temperature effect and catalyst reusability were investigated. The HGR value obtained with 2.5% NaBH₄ using 10 mg catalyst was 7571 mL min^?1g^?1. The activation energy (Ea) for the g–C₃N₄–EDTA-H catalyst was found to be 32.2 kJ mol^?1 The reusability of the g–C₃N₄–EDTA-H catalyst shows a catalytic performance of 72% even after its fifth use.     

Study of oxygen reduction reaction kinetics on multi-walled carbon nano-tubes supported Pt-Pd catalysts under various conditions

Multi-walled carbon nano-tube supported Pt-Pd nanoparticles catalysts were prepared using NaBH₄ as a reducing agent in either KOH or water for use as a cathode catalyst in polymer electrolyte membrane fuel cells (PEMFCs). X-ray diffraction (XRD) showed that compared to catalyst prepared in the absence of KOH, other catalyst has smaller particle sizes. Using the resulting multi-walled carbon nano-tube supported Pt-Pd catalysts, the catalyst particle size affects on the kinetics of the oxygen reduction reaction (ORR) were analyzed using cyclic voltammetry (CV) and rotating disk electrode (RDE) voltammetry. From RDE voltammetric studies, it was found that for both catalysts; the number of electrons, n, involved in the ORR was nearly four at potential 0.3 V versus Ag/AgCl (3 M KCl). Results also showed that the 2-step four electron reduction of O₂ to H₂O precede more favorably on the catalyst with smaller particle size.     

Poly(2-aminoethyl methacrylate) based microgels catalyst system to be used in hydrolysis and methanolysis of NaBH4 for H2 generation

The poly(2-aminoethyl methacrylate) (p(AEM)) microgels were synthesized by microemulsion polymerization technique and used for in situ metal nanoparticle preparation to render as p(AEM)-M (M: Co or Ni) microgel composites and were used in p(AEM) based poly ionic liquid (PIL) microgels. Next, these p(AEM)) based microgel materials were used as catalysts for hydrogen (H₂) production from both hydrolysis and methanolysis reactions of sodium borohydride (NaBH₄). It was found that the catalytic hydrolysis of the NaBH₄ reaction, catalyzed by p(AEM)-Co microgel composite was completed in 140 min, whereas the methanolysis of NaBH₄ methanolysis catalyzed by the PIL of p(AEM)⁺Cl⁻ microgels was completed in 5 min both with 250 ± 2 mL H₂ production. Furthermore, p(AEM)-Co microgel composite catalysts maintained 80% catalytic activity after 5 consecutive uses in NaBH₄ hydrolysis. On the other hand, p(AEM)⁺Cl⁻ microgels were found to afford more than 50% catalytic activity even after 20 repetitive use in NaBH₄ methanolysis due to superior regeneration ability. Moreover, activation energy values for p(AEM)-Co microgel composites catalyzed NaBH₄ hydrolysis reaction were calculated as 38.9 kJ/mol in comparison to 37.3 kJ/mol activation energy of p(AEM)⁺Cl⁻ microgel catalyzed methanolysis reaction.