Zn2+-imprinted porous polymer beads: Synthesis,structure, and selective adsorption behavior for template ion

Zn²⁺-imprinted polymer was synthesized in porous spherical forms via a self-assembled complex between 2,2′-bipyridyl/4-vinylpyridine complexant/functional monomer and Zn²⁺ template ion. Diameters of particles ranged from 250 to 550 μm to enlarge the surface area and thus enhance the adsorption capacity. The presence/absence of the template ion in the preparation of the imprinted polymer was confirmed by EDX spectroscopy, and the physical structure of the particles was investigated using ESEM and BET analysis. The particle and the pore size were controlled by the cross-linker/monomer feed ratio. The adsorption capacity of the imprinted polymers was 210.61 μmol g^?1 for Zn²⁺, while those for Cu²⁺, Ni²⁺, and Pb²⁺, were 37.92 μmol g^?1, 33.02 μmol g^?1, and 9.70 μmol g^?1, respectively. This big discrepancy of the adsorption capacities illustrates the excellent separation selectivity of the imprinted polymers. The adsorption capacity decreased significantly at pH below 4.5, as the polymers are easily protonated. The imprinted particles lost only 10 % of their adsorption ability after 10 repeated uses.     

Preparation and characterisation of a novel copper‐imprinted polymer based on β‐cyclodextrin copolymers for selective determination of Cu2+ ions

A novel ion‐imprinted polymer (IIP) using (6‐O‐butene diacid ester)‐β‐cyclodextrin (β‐CD‐MAH) as the functional monomer and copper ions as the template was developed for Cu²⁺ sensing. First, reactive β‐cyclodextrin (β‐CD) monomers with vinyl carboxylic acid functional groups were synthesised and were co‐polymerised with styrene via radical polymerisation. Then, the β‐CD copolymers were complexed with Cu²⁺ in order to obtain the IIP. The imprinting effect was realised by removing the template ions from the imprinted polymer. The structure, composition and morphology of the IIP were characterised by Fourier transform IR spectroscopy, energy‐dispersive spectroscopy and field‐emission SEM. The adsorption capacity was investigated by UV–visible spectroscopy in batch operation mode. The maximum adsorption capacity for the Cu²⁺ template ions was 28.91 mg g^?1, and the adsorption selectivity was clearly illustrated from the increased sorption affinity towards Cu²⁺ ions over other competing ions. The adsorption was affected by the pH of the aqueous medium, and enhanced adsorption capacity was observed at pH 5. The prepared IIP could be used 10 times after its regeneration without significant loss of the adsorption capacity. © 2018 Society of Chemical Industry     

Preparation of amidoximated bacterial cellulose and its adsorption mechanism for Cu2+ and Pb2+

Amidoximated bacterial cellulose (Am‐BC) was prepared through successive polymer analogous reactions of bacterial cellulose with acrylonitrile in an alkaline medium followed by reaction with aqueous hydroxylamine. It was used as an adsorbent to remove Cu²⁺ and Pb²⁺ from aqueous solutions. The adsorption behaviors of Cu²⁺ and Pb²⁺ onto Am‐BC were observed to be pH‐dependent. The maximum adsorption capacity of 84 and 67 mg g^–1 was observed, respectively, for Cu²⁺ and Pb²⁺ at pH 5. Scanning electronic microscopy (SEM) indicated that the microporous network structure of Am‐BC was maintained even after the modifacation. The adsorption mechanisms for Cu²⁺ and Pb²⁺ onto Am‐BC were investigated by fourier transform infrared spectroscopy (FTIR), ζ potential measurement and X‐ray photoelectron spectroscopy (XPS). The results revealed that the mechanism for the adsorption of Cu²⁺ onto Am‐BC could be mainly described as between metal ions and nitrogen atom in the amidoxime groups or oxygen atom in the hydroxyl groups. However, in the adsorption process for Pb²⁺, precipitation played the important role along with electrostatic interactions, although chelation action also existed in the process accounted for the adsorption process. The regeneration of Am‐BC was studied by treatment with a strong complexing agent, ethylenediaminetetracetic acid (EDTA). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of novel copper ion-selective material based on hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate)

A novel hierarchically imprinted cross-linked poly(acrylamide-co-ethylene glycol dimethacrylate) using a double-imprinting approach for the Cu²⁺ selective separation from aqueous medium was prepared. In the imprinting process, both Cu²⁺ ions and surfactant micelles (cetyltrimethylammonium bromide – CTAB) were employed as templates. The hierarchically imprinted organic polymer named (IIP-CTAB), single-imprinted (IIP-no CTAB) and non-imprinted (NIP-CTAB and NIP-no CTAB) polymers were characterized by SEM, FTIR, TG, elemental analysis and textural data from BET (Brunauer–Emmett–Teller) and BJH (Barrett–Joyner–Halenda). Compared to these materials, IIP-CTAB showed higher selectivity, specific surface area and adsorption capacity toward Cu²⁺ ions. Good selectivity for Cu²⁺ was obtained for the Cu²⁺/Cd²⁺, Cu²⁺/Zn²⁺ and Cu²⁺/Co²⁺ systems when IIP-CTAB was compared to the single-imprinted (IIP-no CTAB) and non double-imprinted polymer (NIP-CTAB), thereby confirming the improvement in the polymer selectivity due to double-imprinting effect. For adsorption kinetic data, the best fit was provided with the pseudo-second-order model for the four materials, thereby indicating the chemical nature of the Cu²⁺ adsorption process. Cu²⁺ adsorption under equilibrium was found to follow dual-site Langmuir–Freundlich model isotherm, thus suggesting the existence of adsorption sites with low and high binding energy on the adsorbent surface. From column experiments 600 adsorption–desorption cycles using 1.8 mol L⁻¹ HNO₃ as eluent confirmed the great recoverability of adsorbent. The synthesis approach here investigated has been found to be very attractive for the designing of organic ion imprinted polymer and can be expanded to the other polymers to improve performance of ion imprinted polymers in the field of solid phase extraction.     

Microwave preparation and properties of O-crosslinked maleic acyl chitosan adsorbent for Pb2+ and Cu2+

A novel chitosan-based adsorbent (CCTM) was prepared by the reaction of epichlorohydrin O-crosslinked chitosan with maleic anhydride under microwave irradiation. The chemical structure of this polymer was characterized by infrared spectroscopy and X-ray diffraction analyses. The effects of various variables such as degree of substitution, adsorption time, initial metal ion concentration, solution pH, and temperature, on the adsorption of Pb²⁺ and Cu²⁺ by CCTM were investigated. The results demonstrate that the microwave irradiation can remarkably enhance the reaction. CCTM has higher adsorption capacity than chitosan. The maximum adsorption capacities for Pb²⁺ and Cu²⁺, with initial concentrations of 0.02 mol L⁻¹ at pH 5, are 246.3 and 132.5 mg g⁻¹, respectively. The adsorbent can be recycled. These results have important implications for the design of effective chitosan-based adsorbents in the removal of heavy metal ions from wastewaters. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Poly (methacrylic acid) modified biomass for enhancement adsorption of Pb2+, Cd2+ and Cu2+

In this study, the graft copolymerization of methacrylic acid onto the biomass of baker's yeast was carried out in aqueous medium using potassium persulfate (PPS) as initiator. The poly (methacrylic acid) modified biomass obtained was characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS) and microscopic analyses. The number of functional groups was determined by potentiometric titration. The adsorption capacity of the modified biomass for Pb²⁺, Cd²⁺ and Cu²⁺ showed a significant increase compared with the pristine biomass, due to the presence of a large number of functional groups. According to the Langmuir equation, the maximum uptake capacities (q_m) for Pb²⁺, Cd²⁺ and Cu²⁺ were 243.9, 108.7 and 73.5 mg g^?1, respectively. Adsorption kinetics study showed that completion of the adsorption process needed only 30 min. The loaded biosorbent was regenerated using EDTA solution and used repeatedly three times with little loss of uptake capacity. Good results were obtained when the modified biomass was used to treat simulated wastewater containing Pb²⁺, Cd²⁺ and Cu²⁺. Copyright © 2007 Society of Chemical Industry     

Adsorption and recognition properties of ionic imprinted polyamine IIP‐PEI/SiO2 towards Pb2+ ion

In this article, an ionic imprinted polyamine (IIP) grafted on the surface of silica gel was prepared through a new surface imprinting approach. The adsorption and recognition properties of IIP‐PEI/SiO₂ for Pb²⁺ ion were studied in detail using batch rebinding studies. The experimental results showed that the IIP‐PEI/SiO₂ had high affinity, specificity, and selectivity for the template ion. The isothermal adsorption data was fit using the Langmuir equation. The adsorption was typical of chemisorption of a monolayer. The selectivity coefficients relative to Zn²⁺ and Cr³⁺ were 32.43 and 68.36, respectively. pH and temperature were found to have a strong influence on the adsorption properties. The adsorption amount increases with rising of temperature and the value of ΔH is plus. The adsorption of Pb²⁺ by IIP‐PEI/SiO₂ was spontaneous and endothermic. At pH = 7, the adsorption capacity of the polymers was the highest. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

SORPTION PROCESSES OF NATURAL IRANIAN BENTONITE EXCHANGED WITH CD2+, CU2+, NI2+, AND PB2+ CATIONS

Experimental studies on the retention of cadmium (Cd²⁺), copper (Cu²⁺), nickel (Ni²⁺), and lead (Pb²⁺) by bentonite samples from Iran were conducted using single- and multiple-component solutions. Based on the sorption capacity of bentonite the following order was obtained for single- and multiple-component solutions: Pb²⁺ > Cd²⁺ > Ni²⁺ > Cu²⁺. The maximum adsorption capacities of bentonite with metals in single- and multiple-component solutions were 29.5%, 22.5%, 19.2%, and 17.1% and 13.5%, 13.4%, 12.1%, and 9.1% for Pb²⁺, Cd²⁺, Ni²⁺, and Cu²⁺, respectively. Desorption isotherms of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ deviated significantly from the sorption isotherms, thereby indicating irreversible or very slowly reversible sorption. Finally, soil solution saturation indices and metal speciation were assessed using the Visual MINTEQ 2.6 program and the probability of mineral precipitation was supported by scanning electron microscopy.     

Adsorption of Pb2+, Cu2+ and Co2+ by polypropylene fabric and polyethylene hollow fiber modified by radiation-induced graft copolymerization

Cation-exchange adsorbents were prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and polyethylene (PE) hollow fiber and subsequent phosphonation of epoxy groups of poly(GMA) graft chains. The adsorption characteristics of Pb²⁺, Cu²⁺ and Co²⁺ for the two cation-exchange adsorbents were studied. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with an increase in reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. In 50, 130 and 250% GMA-grafted PP fabric, the content of phosphoric acid was 1.52, 3.40 and 4.50 mmol/g at 80 °C in the 85 % phosphoric acid aqueous solution for 24 h, respectively. The adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PP fabric adsorbent was enhanced with an increased phosphoric acid content The order of adsorption capacity of the PP fabric adsorbent was Pb²⁺>Co²⁺>Cu²⁺. In adsorption of Pb²⁺, Cu²⁺ and Co²⁺ by PE hollow fiber, the amount of Pb²⁺ adsorbed by the PE hollow fiber adsorbent containing 1.21 mmol/g of -PO₃H wasca. 54.4 g per kg. The adsorption amount of Cu²⁺ and Co²⁺ in the same PE hollow fiber wasca. 21.0 g per kg andca. 32.1 g per kg, respectively. The order of adsorption of the PE hollow fiber adsorbent was Pb²⁺>Co²⁺>Cu²⁺.     

Reusability and selective adsorption of Pb<Superscript>2+</Superscript> on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-<Emphasis Type="Italic">co</Emphasis>-acrylic acid) hydrogel

Reusability and selective adsorption toward Pb²⁺ with the coexistence of Cd²⁺, Co²⁺, Cu²⁺ and Ni²⁺ ions on chitosan/P(2-acrylamido-2-methyl-1-propanesulfonic acid-co-acrylic acid) [CS/P(AMPS-co-AA)] hydrogel, a multi-functionalized adsorbent containing –NH₂, –OH, –COOH and –SO₃H groups was studied. The CS/P(AMPS-co-AA) was prepared in aqueous solution by a simple one-step procedure using glow discharge electrolysis plasma technique. The reusability of adsorbent in HNO₃, EDTA-2Na and EDTA-4Na was investigated in detail. The competitive adsorption of the metal ions at the initial stage was compared between their equal mass concentration and equal molar concentration. In addition, the adsorption mechanism of the adsorbent for adsorption of Pb²⁺ was also analyzed by XPS. The results showed that the optimum pH of adsorption was 4.8, and time of adsorption equilibrium was about 180 min. Adsorption kinetics fitted well in the pseudo second-order model. The equilibrium adsorption capacities of Pb²⁺, Cd²⁺, Co²⁺, Cu²⁺, and Ni²⁺ at pH 4.8 were obtained as 673.3, 358.3, 176.7, 235.0 and 171.7 mg g^?1, in their given order. The adsorbent displayed an excellent reusability using 0.015 mol L^?1 EDTA-4Na solution as the eluent, and the desorption ratio could not correctly reflect the true characteristics of adsorption/desorption process. Moreover, the adsorbent showed good adsorption selectivity for Pb²⁺. The molar adsorption capacity at the initial stage with equal molar concentration was more reliable than the mass adsorption capacity during the study of selective adsorption. According to the XPS results, the adsorption of Pb²⁺ ions by the CS/P(AMPS-co-AA) absorbent could be attributed to the coordination between N atom and Pb²⁺ and ion-exchange between Na⁺ and Pb²⁺.     

L-cystein modified bentonite-cellulose nanocomposite (cellu/cys-bent) for adsorption of Cu2+, Pb2+, and Cd2+ ions from aqueous solution

In this study, L-cystein modified bentonite-cellulose (cellu/cys-bent) nanocomposite was synthesized and characterized by XRD, FTIR, SEM with EDS, TGA, and TEM techniques. In order to optimize the process the effect of various operational parameters such as pH, adsorbent dosage, contact time, and temperature were also investigated. The adsorption experiments were carried out in initial concentrations range of 20-100 mg L^?1and the adsorbent affinity for metal ions was found to be in order of Cu²⁺ > Pb²⁺ > Cd²⁺. The optimum pH for adsorption of Cu²⁺ and Cd²⁺ was observed at 5 while for Pb²⁺ it was pH 6. Based on the Langmuir model, the maximum adsorption capacity of Cu²⁺, Pb²⁺, and Cd²⁺ at 50^?C was found to be 32.36, 18.52, and 16.12 mg g^?1, respectively. The Langmuir isotherm and pseudo-second order model were found to be better fitted than the other isotherms and kinetic models. The results of thermodynamic parameters confirmed the process to be endothermic and spontaneous in nature.     

Novel surface ionic imprinting materials prepared via couple grafting of polymer and ionic imprinting on surfaces of silica gel particles

In this paper, a new surface molecular imprinting technique is put forward, and a kind of novel ion-imprinted polymers (IIPs) were prepared through a new approach: firstly functional macromolecule polyethyleneimine (PEI) was grafted onto the surfaces of silica gel particles via the coupling grafting method (“grafting to” method) and the composite material PEI/SiO₂ with chemical linking was formed; secondly the ionic imprinting was carried out towards the macromolecule PEI grafted on the surface of silica particles using Cu²⁺ or Cd²⁺ ion as a template, epichlorohydrin (ECH) as a crosslinking agent and by coordination linkage actions, and Cu²⁺ ion (or Cd²⁺ ion)-imprinted material IIP-PEI/SiO₂ was prepared. The binding characteristics of IIP-PEI/SiO₂ for Cu²⁺ ion (or Cd²⁺ ion) were studied in detail by adopting both static and dynamic methods. The experimental results show that the ion-imprinting material IIP-PEI/SiO₂ has specific recognition ability for the template ions, and this character displays mainly in two aspects: (1) it has high affinity for the template ions, its binding amounts for the template ions are much greater than that of the non-imprinted composite material PEI/SiO₂, and the adsorption capacity enhances nearly two times compared to PEI/SiO₂; (2) it has excellent selectivity for the template ions, for the IIP-PEI/SiO₂ by using Cu²⁺ as template ion, its selectivity coefficients relative to Zn²⁺ and Ni²⁺ are 80.21 and 86.08, respectively, and for the IIP-PEI/SiO₂ by using Cd²⁺ as template ion, its selectivity coefficients relative to Cr³⁺ and Pb²⁺ are 77.05 and 88.22, respectively. Besides, the imprinting material IIP-PEI/SiO₂ has a fine elution property using HCl solution as eluent. The obtained imprinting material by using the new surface molecular imprinting techniques possesses superexcellent binding property for template molecules or ions because of the distribution of imprinted cavities in a thin polymer layer and smaller diffusion barrier.     

测试——聚乙烯亚胺改性磁性膨润土对Pb2+和Cu2+的吸附性能(测试稿件)

在磁性膨润土(MBent)表面接枝聚乙烯亚胺(PEI)制备了聚乙烯亚胺改性磁性膨润土(PEI/KH560/MBent),采用FTIR、VSM、XRD、TGA、EA、SEM和EDS对其进行了表征,考察了其对水溶液中Pb_²⁺和Cu_²⁺的吸附性能。结果表明,聚乙烯亚胺已成功接枝于磁性膨润土表面,并有效提高其对Pb_²⁺和Cu_²⁺吸附量；溶液初始pH对吸附量影响较大,随着pH的增大,吸附量增加。在pH=5,溶液初始质量浓度为300 mg/L,PEI/KH560/MBent对Pb_²⁺和Cu_²⁺吸附量分别为96.21和61.08 mg/g；吸附过程符合准二级动力学模型,吸附行为符合Langmuir吸附等温模型。热力学研究表明,吸附为自发吸热过程。经过5次循环利用后,其吸附容量仍保持初始的60%以上,表明PEI/KH560/MBent具有一定的重复利用性。     

Preparation of a surface molecular‐imprinted adsorbent for Ni2+ based on Penicillium chrysogenum

A new chitosan molecular‐imprinted adsorbent was prepared from the mycelium of waste biomass. The results showed that an adsorbent using Penicillium chrysogenum mycelium as the core material was better than one derived from peanut coat. The adsorption capacity of the surface‐imprinted adsorbent for Ni²⁺ was enhanced by increasing the chitosan concentration in the imprinting process. Epichlorohydrin was better than glutaraldehyde as a cross‐linking agent; the optimal imprinted Ni²⁺ concentration for preparing the surface‐imprinted adsorbent was 2 mg (Ni²⁺) g^?1 of mycelium. The adsorption capacity of the surface‐imprinted adsorbent was 42 mg g^?1 (at 200 mg dm^?3 initial metal ions concentration) and twice that of the mycelium adsorbent. The surface‐imprinted adsorbent can be reused for up to 15 cycles without loss of adsorption capacity. Copyright © 2005 Society of Chemical Industry     

Crosslinking induced by irradiation raises selectivity of polymeric adsorbent

Amine‐type adsorbents were prepared by radiation‐induced graft polymerization. The sorption behaviors for an individual metal ion of Cu²⁺ and Pb²⁺ separately, as well as with mixed Cu²⁺/Pb^2+, were studied in both column and batch mode. Ethylenediamine‐type adsorbent exhibited a high capacity for Cu²⁺ and Pb²⁺ at a high flow rate of 1000 h^?1, but low selectivity in the mixed Cu²⁺/Pb²⁺ solutions. Radiation‐induced crosslinking of the amine‐type adsorbent was performed in water to improve selectivity. Crosslinking of the material was demonstrated by gel fraction, water content, and scanning electron microscopy image. Compared with the results from the noncrosslinked adsorbents, the breakthrough curve of Cu²⁺ right shifted, whereas the breakthrough curve of Pb²⁺ left shifted, indicating the higher adsorption capacity of Cu²⁺ and the lower adsorption capacity of Pb²⁺ from the crosslinked adsorbent. After 300 kGy irradiation, the crosslinked adsorbent was found to selectively adsorb Cu²⁺ from the mixed Cu²⁺/Pb²⁺ solution. The results revealed that crosslinking raised the selectivity of the adsorbents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation of functionalized ion‐imprinted phenolic polymer for efficient removal of copper ions

In this work, an ion‐imprinted polymeric material based on functionalized phenolic resin was developed for the efficient selective removal of Cu²⁺ ions from aqueous solution. p‐Aminophenol‐isatin Schiff base ligand (HPIS) was first synthesized and combined with Cu²⁺ ions to prepare the corresponding complex [Cu(PIS)₂]. The Schiff base ligand along with its copper complex was fully investigated and characterized before anchoring in a base‐catalyzed condensation copolymerization with formaldehyde and resorcinol. The Cu²⁺ ions were removed from the obtained resin construction and the resulting Cu²⁺ ion‐imprinted material (Cu‐PIS) was employed for the selective extraction of Cu²⁺ ions under different pH values, initial concentrations and contact time conditions. The optimum pH for the removal process was chosen as 6 and the maximum adsorption capacity was 187 ± 1 mg g^–1. Also, the kinetics showed a better fit with the pseudo‐second‐order equations. The selectivity of the prepared Cu‐PIS was also evaluated in a multi‐ionic species containing Ni²⁺, Cd²⁺, Pb²⁺, Co²⁺ besides Cu²⁺ ions and the determined parameters confirmed a superior recognition capability toward the imprinted Cu²⁺ ions. © 2019 Society of Chemical Industry     

Preparation of gel resins and removal of copper and lead from water

A series of gel resins were prepared by polymerizing glycidyl methacrylate (GMA) and 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) and functionalizing with ammonia (NH₃) and tetraethylenepentamine (TEPA). The aminated gel resins were then used as an adsorbent for the removal of heavy metal ions (Cu²⁺ and Pb²⁺). These gel resins containing amino groups and chelating amino groups had excellent adsorptive properties for Cu²⁺ and Pb²⁺. The adsorption process reached equilibrium in 40 min, and the adsorption capacities of Cu²⁺ and Pb²⁺ were 75.0 mg g^?1 and 266.6 mg g^?1 for the NH₃‐aminated gel resins and 57.5 mg g^?1 and 330.6 mg g^?1 for the TEPA‐aminated gel resins, respectively. After five adsorption–desorption processes, the adsorption capacities only decreased slightly. Thus, these aminated gel resins can be used as effective adsorbents for aqueous heavy metal ions (Cu²⁺ and Pb²⁺). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44466.     

Novel magnetic polyamic hydrazide nanocomposite: Preparation,characterization, and application for the removal of cd2+ and pb2+ from industrial wastes

In this work, a novel polymer polyamic hydrazide (PAH) was synthesized via the reaction of terephthalohydrazide with pyromelitic dianhydride. The obtained PAH was characterized with nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FT‐IR) spectroscopy and elemental analysis. Finally, a novel magnetic nanocomposite was prepared by immobilization of PAH on the Fe₃O₄ nanoparticles in water. The prepared magnetic nanocomposite was successfully used for selective removal of Pb²⁺ and Cd²⁺ ions from industrial wastes and the effects of affecting parameters on the adsorption capacity of the magnetic nanocomposite adsorbent for the removal of Pb²⁺ and Cd²⁺ from model aqueous solutions were investigated. The maximum adsorption capacities of Pb²⁺ and Cd²⁺ were found to be 138.9 and 103.1 mg g^?1, respectively. The kinetics and mechanism of the adsorption of Pb²⁺ and Cd²⁺ on the surface of the prepared nanocomposite were studied and it was found that complex formation between active sites of the surface of the nanocomposite and metal ions is the possible mechanism for adsorption of metal cations. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42538.     

Preparation of thiourea functionalized polyvinyl alcohol‐coated magnetic nanoparticles and their application in Pb2+ ions adsorption

We have prepared a novel kind of magnetic nanoparticle with high adsorption capacity and good selectivity for Pb²⁺ ions by modifying the magnetic nanoparticles with polyvinyl alcohol (PVA) and thiourea. The resultant magnetic nanoparticles were used to adsorb Pb²⁺ ions from aqueous solution. The influence of the solution pH, the adsorption time, the adsorption temperature, coexisting ions, and the initial concentration of Pb²⁺ ions on the adsorption of Pb²⁺ ions were investigated. The results indicated that Pb²⁺ ions adsorption was an endothermic reaction, and adsorption equilibrium was achieved within 30 min. The optimal pH for the adsorption of Pb²⁺ ions was pH 5.5, and the maximum adsorption capacity of Pb²⁺ ions was found to be 220 mg/g. Moreover, the coexisting cations such as Ca²⁺, Co²⁺, and Ni²⁺ had little effect on adsorption of Pb²⁺ ions. The regeneration studies showed that thiourea functionalized PVA‐coated magnetic nanoparticles could be reused for the adsorption of Pb²⁺ ions from aqueous solutions over five cycles without remarkable change in the adsorption capacity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40777.     

Synthesis,characterization, metal sorption,and biological activity of poly(N‐heterocylic acrylamide)

N‐heterocyclic acrylamide monomers were prepared and then transferred to the corresponding polymers to be used as an efficient chelating agent. Polymers reacted with metal nitrate salts (Cu²⁺, Pb²⁺_, Mg²⁺, Cd²⁺, Ni²⁺, Co²⁺_, Fe²⁺) at 150°C to give metal‐polymer complexes. The selectivity of the metal ions using prepared polymers from an aqueous mixture containing different metal ion sreflected that the polymer having thiazolyl moiety more selective than that containing imidazolyl or pyridinyl moieties. Ion selectivity of poly[N‐(benzo[d]thiazol‐2‐yl)acrylamide] showed higher selectivity to many ions e.g. Fe³⁺, Pb²⁺, Cd²⁺, Ni²⁺, and Cu²⁺. While, that of poly[N‐(pyridin‐4‐yl)acrylamide] is found to be high selective to Fe³⁺ and Cu²⁺ only. Energy dispersive spectroscopy measurements, morphology of the polymers and their metallopolymer complexes, thermal analysis and antimicrobial activity were studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42712.