共查询到20条相似文献,搜索用时 187 毫秒
1.
我国不定形耐火材料从七十年代之后有了较大的发展,不少耐火材料厂都建立了不定形耐火材料车间。其中鞍钢耐火厂、沈阳耐火厂、天津耐火厂、北京耐火厂、上海耐火一厂和成都耐火厂等产品品种和产量都有较大幅度的增长,产品质量也较稳定。 相似文献
2.
近几年来,不定型耐火材料在国内各种工业炉上,已得到广泛应用。然而,这类材料的热稳定性差,在压力突变条件下,耐火料构件极易断裂或剥落,从而影响了工业炉的使用效率。在80年代,发达国家已普遍采用耐热不锈钢纤维,来增强不定形耐火料。由于它可提高韧性和热稳定性,耐火材料使用寿命可 相似文献
3.
耐火喷涂料属不定形耐火材料,具有独特的成型方法和施工工艺,在工业炉窑上有着广泛的使用价值。本文介绍了两类新型耐火喷涂料的性能,以及它们在热风炉炉壳保护层和热风炉内衬修补上的应用。应用表明,耐火喷涂料的确能提高炉体的密封性、寿命和保温效果。 相似文献
4.
不定形耐火材料,也称做散状耐火材料。这种材料首先是在美国发展起来的。在三十年代初期,美国试用铝酸盐水泥配制成耐火浇注料,使用在高效能复杂构造的锅炉上,并逐步扩大到石油精炼设备中。以后又出现了耐火可塑料、耐火捣打料、耐火喷涂料等。由于它具有明显的特性和广泛的优点,很快发展在钢铁工业窑炉中使用。战后,西欧和日本处于经济恢复时期,开始从美国引进不定形耐火材料技术,并自己生产,用于火力发电锅炉和石油精炼设备中,进入六十年代,开始向钢铁工业窑炉方面发展。近十几年来,世界主要产钢国家发生能源危机,引起钢铁工业自找出路,大大地加快了不定形耐火材料的发展。日本耐火材料 相似文献
5.
75℃油井水泥耐火混凝土是不定形耐火材料中的一个重要品种,并是不经锻烧的新型耐火材料。用75℃油井水泥配制耐火混凝土,国内才开始,在重钢平炉烟道全部浇注这种不定形耐火材料,尚属第一次,效果较好。对其它冶金工业炉窑上也有一定推广价值。该文曾在全国筑炉不定型耐火材料会议上宣读,据认为这种材料的配制成功为简化耐火材料的生产工艺和炉窑结构改革提供了有利条件。 相似文献
6.
本文讨论了不定形耐火材料的结合方式和结合机理,在此基础上介绍了不定形耐火材料结合剂的演变趋势。文中认为结合方式的发展顺序是水合结合、化学结合、陶瓷结合,水合结合 凝聚结合和凝聚结合,而耐火浇注料则由高水份向低水份、超低水份和无水份的方向发展,即不定形耐火材料向着高纯度,高密度的方向发展。 相似文献
7.
江苏省蕴藏有丰富耐火结合软质原料和膨胀剂(如兰晶石矿)对发展硅铝系不定形耐火材料提供了有利条件。本试验利用了上述有利条件,选优配方,探讨理、化性能、达到了预想结果。1.AL—A 高温浇注料的机理这种浇注料主要是由耐火骨料与结合剂组成的一种不定形耐火材料,(它适用于加热炉、均热炉、高炉出铁沟、混铁车脱硫用喷枪等)它的特性,在很大程度上依赖于结合剂,因为结合剂的引入,往往会导致物相的复杂变化,从而降低常温作业性能和高温物理性能,因此选择结合剂是关键问题。 相似文献
8.
介绍了不定形耐火材料(耐火浇注料)的组成、理化性能及使用特点,并以实例分析了浇注料炉衬在烘炉过程中发生的“放爆”现象,进而提出了科学的烘炉工艺曲线以及烘炉时的注意事项。 相似文献
9.
一、简介不定形耐火材料是一种不经煅烧的新型耐火材料,近十几年来,发展十分迅速,品种不断增加,应用较为广泛。耐火材料按供料方式分两大类:定形耐火材料(各种烧成耐火砖)和不定形耐火材料(散状耐火材料或预制块)。 相似文献
10.
11.
A. N. Smirnov 《Russian Metallurgy (Metally)》2013,2013(6):438-441
The transformation of the consumption of refractories for the production, out-of-furnace treatment, and casting of steel is considered. The main trends in developing the refractory market are shown to be a significant decrease in the specific consumption of refractories per 1 t liquid steel and the predominant application of refractories based on magnesia raw materials and fused corundum for the working layers of melting units, ladles, and tundishes. The main trend in decreasing the specific costs of refractories is the development of refractories based on alternative sources of raw materials, which are cheaper and more available for refractory manufacturers. 相似文献
12.
综述了超高功率交流和直流电弧炉炼钢用耐火材料的生产发展现状。根据我国耐火材料的生产水平和对多种引进耐火制品和材料的剖析结果,论证了电冶金炉用耐火材料的发展方向。 相似文献
13.
研究了3种C含量的(3%、5%、10%,质量分数)MgO-C耐火材料与超低碳钢的相互作用。利用ICPAES、氧氮分析仪、碳硫分析仪检测了与实验MgO-C耐火材料接触的钢液的成分,用XRD分析了耐火材料反应前后的物相变化,并利用SEM观察了耐火材料/钢界面。结果表明,随着镁碳耐火材料中C含量的增加,耐火材料/钢界面附近的渗透层厚度增加;反应后钢液中的C、N、Al含量以及Mg含量随着耐火材料中C含量的增加而增加,钢中O含量随之降低;反应前后的镁碳耐火材料都有镁铝尖晶石的存在,高C含量的耐火材料反应后镁铝尖晶石含量增加,因此低碳镁碳耐火材料更有利于超低碳钢的生产。 相似文献
14.
In the converter shop at OAO Nizhnetagil’skii Metallurgicheskii Kombinat (NTMK), the steel-casting ladle is lined with oxide-carbon
refractories. The aggressiveness of slags toward the refractory lining is explained. The composition of the linings is studied,
along with the processes within the refractories at high temperatures. The basic requirements on refractory components supplied
to OAO NTMK are formulated. The life of casting-ladle linings in the converter shop is increased. 相似文献
15.
介绍了我国镁质复合耐火材料的品种及其在高温工业炉中的应用情况,并对镁质复合耐火材料的发展提出了建议。 相似文献
16.
随着在世界耐火材料行业中地位的不断提升,我国已成为耐火材料生产、销售、出口的世界大国,但特种、节能、长寿、环境友好型等先进耐火材料占比较低。因此,在当前耐火材料主要下游行业品种结构不断调整、技术不断更新、发展低碳经济,以及新兴产业对耐火材料需求不断增加的情况下,突破关键技术瓶颈,大力发展先进、绿色环保的耐火材料势在必行。对我国耐火材料的发展现状、发展81前景及存在问题进行了思考和浅析,提出对策建议。 相似文献
17.
《钢铁冶炼》2013,40(5):319-325
AbstractInteractions between the molten steel and the refractory linings are of fundamental importance for the steelmaking industry. During the casting process, the steel cleanliness can be made worse because of the reoxidation of the molten steel in contact with the atmosphere and/or other sources of oxygen (refractories, top slag, etc.). In the industrial trial periods, four tundish refractory linings (preformed boards, two kinds of gunning materials and dry vibrating material, all MgO based refractories) were used in order to evaluate the interactions between the refractories and the molten steel. Owing to the small dimension of the tundish (5 ton) used in the continuous casting at Villares Metals SA, after casting, the chilled steel was cut in order to show, in a single section, the stopper, submerged entry nozzle, MgO ramming and the working refractory lining. Cross-sections of samples from the steel/refractory interface were investigated by electron probe microanalysis (EPMA). Four major aspects were observed at the steel/refractory interface: steel infiltration into the tundish refractory lining, mainly in the gunning materials; a steel oxidised layer formed at the steel/refractory lining interface; formation of a spinel layer between steel and tundish working refractory lining; and many particles were found in the steel phase, near to the steel/refractory interface, being a potential source of non-metallic inclusions. 相似文献
18.
19.