共查询到20条相似文献,搜索用时 234 毫秒
1.
2.
在电解冶金和电化学工业领域,大量霍尔直流超大电流传感器无预留校准接口。针对这一实际问题,设计了一种基于数字图像识别和光纤电流传感器的直流大电流在线校准装置。该在线校准装置以光纤电流传感器为标准,利用图像传感器实时采集霍尔电流传感器二次显示仪表的示数图像,对采集到的图像进行灰度化、中值滤波、二值化、闭运算、字符分割等预处理,并采用穿线法进行图像识别,获取霍尔电流传感器的采样值,并与光纤电流传感器的标准测量值进行实时比较,计算被校霍尔电流传感器的测量误差。现场校准的实验结果验证了校准方法及装置的可行性。 相似文献
3.
针对压电式力传感器连续加载的校准方法进行初步探索。使用高精度应变式力传感器作为标准力传感器,在叠加式力标准装置上对压电式力传感器施加类似三角波式的连续载荷,利用数据采集系统采集标准力传感器和被校压电式力传感器的输出,记录整个加载过程,对输出曲线进行分析处理。提出了在连续加载曲线上选择校准点的方法,通过实验数据验证该校准方法的可行性,并对影响校准结果的各种因素进行了初步的分析。 相似文献
4.
磁电式振动速度传感器(以下简称“传感器”)是用来测量机械振动量的一种传感器,它利用电磁感应原理将机械振动速度量转换成电压量输出,这种传感器广泛应用于机械、电力、航空等领域。传感器的主要技术指标有速度灵敏度、频率响应、幅值线性、横向灵敏度比、动态范围和温度响应等。其中,速度灵敏度的校准是确保振动速度量值准确可靠的一项主要指标。对传感器灵敏度校准结果的测量不确定度评定如下: 相似文献
5.
6.
7.
为提高准静态环境使用的力传感器校准精度,研制了基于伺服驱动的离心式动态力校准装置。该装置利用直驱伺服电机驱动和控制质量块做离心运动,通过去轴承设计的动力传动机构输出量值可控的动态力;建立了动力学模型并得到了实验验证;进行了测量重复性和动态响应性能实验研究。实验结果表明,校准装置在中高转速下测量重复性优于1%,能在0.242s内加速到额定转速500r/min,且输出力值可达到3.8kN。 相似文献
8.
9.
10.
11.
A novel signal conditioning circuit suitable for push-pull type capacitive transducers is proposed. The circuit developed is capable of providing a linear output over a wide range of values of the physical quantity being measured even when the transducer output has an inverse relationship with the measurand. The push-pull type capacitive transducer becomes an integral part of a relaxation oscillator, the duty cycle ratio of the output of which becomes proportional to the measurand. The various sources of error in the circuit are analyzed, and quantitative expressions to estimate such errors are derived. Results obtained from tests on a prototype indicate that the circuit possesses very low errors 相似文献
12.
Massicotte D. Legendre S. Barwicz A. 《IEEE transactions on instrumentation and measurement》1998,47(2):362-370
The problem of applying the neural networks for static calibration of measuring systems and for measurand reconstruction is addressed. A multilayered neural network based method for the static calibration of this system is proposed. The functioning of the calibrated measuring system is based on three fiber-optic transducers whose static characteristics are nonmonotonic and significantly influenced by temperature. The applicability of the proposed calibration method is demonstrated in the case under consideration using synthetic and real data. The neural network is designed and implemented in a general purpose microcontroller. In comparison with the spline-based method of calibration, for the same reference data, the proposed method allows obtention of a better quality of calibration and, most important, when calibrated, the multilayered neural network does not require the measurement of temperature for pressure reconstruction 相似文献
13.
Shi Huang Morawski R.Z. Barwicz A. Bock W.J. Urbanczyk W. 《IEEE transactions on instrumentation and measurement》1995,44(3):698-703
The paper deals with an electronically scanned white-light interferometric transducer for high-pressure measurements which consists of a sensor, a conditioning circuit, an analog-to-digital converter, and a digital signal processor of the output signal from the sensor. The calibration of such a transducer consists of identifying a function modeling the relationship between the raw result of measurement y, which is the output of the transducer, and the measured pressure p, taking into account an influence quantity-temperature T. An algorithm for calibration is proposed and studied 相似文献
14.
利用高精度压力传感器作为原位传递标准,提出了一种活塞压力计校准新方法。对传感器的分辨率和短期稳定性进行了测试,并评估了传感器线性系数对校准结果的影响。对比研究了新方法和传统方法的校准结果,两者的不确定度均约为5×10-6(k=1),且在不确定度范围内是一致的。在新方法的基础上研制了活塞压力计自动化校准装置,实现了压力控制、阀门操作和数据采集等功能的自动化。该自动化装置提高了活塞压力计校准的效率。 相似文献
15.
16.
力传感器动态校准通常采用静态指标分析方法,很难评价其结构参数对模型时变特性的影响,为此提出一种力传感器动态校准方法。针对被校准力传感器的结构特征建立参数化数学模型,分析动态激励与结构响应之间的频域传递关系;利用最小二乘法对传递函数的频谱特性进行解析,实现模型参数的辨识;采用频率分析法建立传递函数的频域几何关系式,实现动态校准模型的稳定性评价。采用落锤式冲击力校准装置验证所提方法,结果表明该方法能以较小的标准差辨识被校准力传感器的结构参数,也能依据相位裕量和幅值裕量判断动态校准模型的稳定性。 相似文献
17.
18.
19.
光纤电流传感器运用Faraday效应,将光纤绕在电流母线上可以方便地测得电流母线中的电流,但光纤电流传感器的信号受环境振动、温度变化的影响严重,从而限制了其应用。本文从分析振动、温度变化的干扰机理出发,提出一种新型的在线校正方法来抑制干扰的影响,并进行了原理性实验。研究结果表明,用这种方法实现的光纤电流传感器在40~400A之间有良好的线性度和精度。 相似文献
20.
随着换能器谐振频率的降低,其尺寸一般会增大,现有的测量方法对其指向性的测量越来越困难,而且换能器在实船安装前后性能会发生变化。文章提出了一种基于三维立体水听器阵列的开阔水域下换能器指向性实船校准方法。利用超短基线定位和坐标转换确定待校准换能器与水听器阵列的位置与方向,并通过水听器阵的接收声压数据绘制换能器的指向性图。在湖上试验时分别使用标准测量法和实船校准法测量换能器的指向性,并对5 kHz和2.5 kHz频率下的实验数据进行对比分析,测试结果表明:-3 dB波束宽度误差分别为4.2%和7.4%,均满足水声测量误差低于10%的要求,证明了实船校准法的可行性和有效性。 相似文献