共查询到20条相似文献,搜索用时 31 毫秒
1.
Present paper is proposed to capture the influences of carbon nanotubes’ agglomeration on the stability behaviors of multi-scale hybrid nanocomposite beams within the frameworks of refined higher order beam theories for the first time. In this research, a mixture of macroscale and nanoscale fillers will be utilized to be dispersed in an initial matrix to possess a multi-scale hybrid nanocomposite. The equivalent material properties are seemed to be calculated coupling the Eshelby–Mori–Tanaka model with the rule of the mixture to consider the effects of carbon nanotubes inside the probably generated clusters while finding the mechanical properties of such novel hybrid nanocomposites. Furthermore, an energy-based approach is implemented to obtain the governing equations of the problem utilizing a refined higher order beam theorem. Next, the derived equations will be solved in the framework of Galerkin’s well-known analytical method to reach the critical buckling load. It is worth mentioning that influence of various boundary conditions is included, too. Once the validity of presented results is proven, a set of numerical examples are presented to explain how each variant can affect the structure’s stability endurance. 相似文献
2.
A hybrid analytical-intelligent approach is proposed for fuzzy reliability analysis of the composite beams reinforced by zinc oxide (ZnO) nanoparticle. The fuzzy reliability index corresponding to buckling failure mode of nanocomposite beam under thickness-direction external voltage is computed based on three-levels: (1) fuzzy analysis, (2) reliability analysis and (3) analytical buckling analysis. In fuzzy analysis level, an improved gravitational search algorithm has been applied to determine uncertainty interval for membership levels of reliability index. The adaptive formulation with a dynamical self-adjusting process is used for reliability analysis level based on conjugate first-order reliability method (FORM). The self-adjusting term in conjugate sensitivity vector is used to satisfy the sufficient descent condition for controlling instability of FORM formula while the proposed conjugate scalar factor is computed less than the original conjugate FORM, thus it may be provided with the efficient results for the convex problem. The new and previous sensitivity vectors obtained by conjugate and steepest descent vectors dynamically adjusted the proposed conjugate factor. In the buckling analysis level, an exponential theory in conjunction with the method of energy is utilized. Fuzzy random variables including applied voltage, the volume fraction of ZnO, thickness of beam, spring constant and shear constant of the foundation are considered in studied nanocomposite beam. Survey results indicated that the proposed method can provide stable and acceptable fuzzy membership functions for parametric study. Moreover, the ratio of length to thickness and spring constant of foundation are the more sensitive parameters which affect fuzzy reliability index significantly. 相似文献
3.
In this paper, a new and simple approach is presented to exactly calculate the critical buckling loads of beams with arbitrarily axial inhomogeneity. For various end boundary conditions, we transform the governing equation with varying coefficients to linear algebraic equations; then a characteristic equation in critical buckling loads will be obtained. Several examples of estimating buckling loads under typical end supports are discussed. By comparing our numerical results with the exact and existing results for homogeneous and nonhomogeneous beams, it can be found that our method has fast convergence and the obtained numerical results have high accuracy. Moreover, the buckling behavior of a functionally graded beam composed of aluminum and zirconia as two constituent phases is investigated for axially varying material properties. The effects of gradient parameters on the critical buckling loads are elucidated. Finally, we give an example to illustrate the enhancement of the load-carrying capacity of tapered beams for admissible shape profiles with constant volume or weight. The proposed method is of benefit to optimum design of beams against buckling in engineering applications. 相似文献
4.
This paper presents a model for the investigation of buckling, flutter and vibration analyses of beams using the integral equation formulation. A mathematical formulation based on Euler–Bernoulli beam theory is presented for beams with variable sections on elastic foundations and subjected to lateral excitation, conservative and non-conservative loads. Using the boundary element method and radial basis functions, the equation of motion is reduced to an algebraic system related to internal and boundary unknowns. Eigenvalue problems related to buckling and vibrations are formulated and numerically solved. Buckling loads, natural frequencies and associated eigenmodes are computed. The corresponding slope, bending and shear forces can be directly obtained. The load-frequency dependence is investigated for various elastic foundations and the divergence critical loads are evidenced. Under non-conservative loads, a dynamic stability analysis is illustrated numerically based on the coalescence of eigenfrequencies. The flutter load and instability regions with respect to the elastic concentrated and distributed foundations are identified. Using the eigenmodes, numerically computed, non-linear vibrations of beams are investigated based on one mode analysis. The presented model is quite general and the obtained numerical results are in agreement with available data. 相似文献
5.
This paper aims to investigate the size scale effect on the buckling and post-buckling of single-walled carbon nanotube (SWCNT) rested on nonlinear elastic foundations using energy-equivalent model (EEM). CNTs are modelled as a beam with higher order shear deformation to consider a shear effect and eliminate the shear correction factor, which appeared in Timoshenko and missed in Euler–Bernoulli beam theories. Energy-equivalent model is proposed to bridge the chemical energy between atoms with mechanical strain energy of beam structure. Therefore, Young’s and shear moduli and Poisson’s ratio for zigzag (n, 0), and armchair (n, n) carbon nanotubes (CNTs) are presented as functions of orientation and force constants. Conservation energy principle is exploited to derive governing equations of motion in terms of primary displacement variable. The differential–integral quadrature method (DIQM) is exploited to discretize the problem in spatial domain and transformed the integro-differential equilibrium equations to algebraic equations. The static problem is solved for critical buckling loads and the post-buckling deformation as a function of applied axial load, CNT length, orientations and elastic foundation parameters. Numerical results show that effects of chirality angle, boundary conditions, tube length and elastic foundation constants on buckling and post-buckling behaviors of armchair and zigzag CNTs are significant. This model is helpful especially in mechanical design of NEMS manufactured from CNTs. 相似文献
6.
A computer method to study the inelastic stability of laterally unsupported steel I-beams and based on a general non-linear theory is presented.Traditionally, the problem of flexural-torsional stability of beams is treated as a lateral buckling problem. Some of the draw-backs of these earlier studies are given below:The classical theory assumes that the deformations are small. In addition the deformation field is linearized. This theory is therefore valid only when the major axis flexural rigidity is much greater than its minor axis rigidity, so that deformations before the onset of lateral buckling are negligible.The lateral buckling theory is valid for straight beams, with loads applied rigorously in the plane of symmetry. Practical beams have initial imperfections and unavoidable load eccentricities. So the true behavior is better described by the stability phenomenon.For beams of intermediate length for which buckling occurs in the inelastic range, the tangent modulus theory is generally used. For ideally straight beams the tangent modulus theory provides an estimate for the collapse load which is slightly conservative. However, for practical beams with initial deformations, this need not be the case.In the majority of existing studies on inelastic lateral buckling, the differential equations for beams under uniform moment are used without modification for beams under moment gradient. In the later case the shear center line is inclined to the centroidal and geometrical axes. The differential equations for beams under uniform moment should therefore be modified by adding additional terms.The majority of the existing studies are limited to the behavior of isolated beams with simple end-conditions and so the beneficial effect of adjacent members on the beam collapse load cannot be studied accurately.A general non-linear theory to describe the spatial behavior of beams and that doesn't have the deficiencies mentioned above, is developed in the present paper.The paper also presents a computer method of solving these non-linear equations using the method of finite differences. Several numerical examples presented and comparison with the existing theoretical and experimental results show the applicability of the theory to a wide range of problems. 相似文献
7.
In the companion paper, an improved formulation for spatial stability analysis of shear deformable thin-walled curved beams with non-symmetric cross-sections is presented based on the displacement field considering both constant curvature effects and the second-order terms of semi-tangential rotations. Thus the elastic strain energy and the potential energy due to initial stress resultants are consistently derived. Also closed-form solutions for in-plane and lateral-torsional buckling of curved beams subjected to uniform compression and pure bending are newly derived for mono-symmetric thin-walled curved beams under simply supported and clamped end conditions. In this paper, F. E. procedures are developed by using curved and straight beam elements with non-symmetric cross-sections. Analytical and numerical solutions for spatial buckling of shear deformable thin-walled circular beams are presented and compared in order to illustrate the accuracy and the practical usefulness of this study. In addition, the extensive parametric studies are performed on spatial stability behavior of curved beams. Particularly transition and crossover phenomena of buckling mode shapes with change in curvature and length of beam on buckling for curved beams are investigated for the first time. 相似文献
8.
In this present work, buckling analysis of restrained nanotubes placed in electromagnetic field is studied on the basis of Euler–Bernoulli beam theory in conjunction with Eringen’s nonlocal elasticity theory. The modal displacement function is assumed for the stability analysis in order to discretize the derived governing equation. A Fourier sine series with Stoke’s transformation is utilized to investigate the buckling response. The essential advantage of this transformation is its ability of dealing with various boundary conditions to determine the buckling loads. For demonstrate the effects of various parameters such as Hartmann parameter, spring parameter and mode number on the stability response and critical buckling load of electromagnetic nanobeam a detailed study is presented. Variations of buckling loads, critical buckling loads and buckling load ratios of the nanobeam are exhibited with a number of tables and plotted figures. The results obtained from the analysis are discussed on the tables and figures. 相似文献
9.
Although fibre reinforced polymers exhibit several advantages over traditional materials, their widespread acceptance is being delayed by the lack of appropriate design codes. In fact, additional and comprehensive experimental data are needed to assess the accuracy of recently developed analytical and numerical design tools. This work reports an experimental study on the first-order, buckling and post-buckling behaviours of I-section beams made of GFRP pultruded profiles. Tests were first carried out on small-scale (coupon) specimens, in order to determine the most relevant material mechanical properties. Full-scale tests were then conducted on (i) simply supported beams with spans varying from 1.0 m to 4.0 m under 3-point bending and (ii) cantilevers with spans ranging from 2.0 m to 4.0 m subjected to a tip point load applied at the end cross-section centroid or top/bottom flange mid-point. While the first series is aimed at investigating the flexural behaviour under service and failure conditions (including the local buckling of the top flange), the objective of the second series is to study the collapse behaviour stemming from lateral-torsional buckling. The results obtained confirm that, due to the GFRP low Young’s modulus and high strength, the beam structural integrity is often governed by excessive deformation and/or local and global buckling phenomena, rather than by material strength limitations. Moreover, the low shear-to-Young’s modulus ratio implies that the role played by the shear deformation is quite relevant, particularly in stocky beams. The experimental data presented here is used to validate and assess the accuracy of numerical simulations reported in a companion paper (Part 2). 相似文献
10.
This paper deals with equal-width length-scale control in topology optimization. To realize this aim, we first review different notions of minimum and maximum length-scale control and highlight some perhaps counterintuitive consequences of the various definitions. Here, we implement equal-width control within the moving morphable components (MMC) framework by imposing the same upper and lower bounds on the width of the components. To avoid partially overlapping beams and nearly parallel beams, as well as beams crossing at small angles, we introduce penalty functions of the angle difference and the minimum distance between any two beams. A penalized optimization formulation of compliance minimization is established and studied in several numerical examples with different load cases and boundary conditions. The numerical results show that equal-width length-scale control can be obtained by using the proposed penalty function in combination with a continuation approach for the amount of penalization. 相似文献
11.
Optimization techniques, specially evolutionary algorithms, have been widely used for solving various scientific and engineering optimization problems because of their flexibility and simplicity. In this paper, a novel metaheuristic optimization method, namely human behavior-based optimization (HBBO), is presented. Despite many of the optimization algorithms that use nature as the principal source of inspiration, HBBO uses the human behavior as the main source of inspiration. In this paper, first some human behaviors that are needed to understand the algorithm are discussed and after that it is shown that how it can be used for solving the practical optimization problems. HBBO is capable of solving many types of optimization problems such as high-dimensional multimodal functions, which have multiple local minima, and unimodal functions. In order to demonstrate the performance of HBBO, the proposed algorithm has been tested on a set of well-known benchmark functions and compared with other optimization algorithms. The results have been shown that this algorithm outperforms other optimization algorithms in terms of algorithm reliability, result accuracy and convergence speed. 相似文献
12.
In this research, thermal buckling and forced vibration characteristics of the imperfect composite cylindrical nanoshell reinforced with graphene nanoplatelets (GNP) in thermal environments are presented. Halpin–Tsai nanomechanical model is used to determine the material properties of each layer. The size-dependent effects of GNPRC nanoshell is analyzed using modified couple stress theory. For the first time, in the present study, porous functionally graded multilayer couple stress (FMCS) parameter which changes along the thickness is considered. The novelty of the current study is to consider the effects of porosity, GNPRC, FMCS and thermal environment on the resonance frequencies, thermal buckling and dynamic deflections of a nanoshell using FMCS parameter. The governing equations and boundary conditions are developed using Hamilton’s principle and solved by an analytical method. The results show that, porosity, GNP distribution pattern, modified couple stress parameter, length to radius ratio, mode number and the effect of thermal environment have an important role on the resonance frequencies, relative frequency change, thermal buckling, and dynamic deflections of the porous GNPRC cylindrical nanoshell using FMCS parameter. The results of current study can be useful in the field of materials science, micro-electro-mechanical systems and nano electromechanical systems such as microactuators and microsensors. 相似文献
13.
In the present study, Multi-objective optimization of composite cylindrical shell under external hydrostatic pressure was investigated. Parameters of mass, cost and buckling pressure as fitness functions and failure criteria as optimization criterion were considered. The objective function of buckling has been used by performing the analytical energy equations and Tsai-Wu and Hashin failure criteria have been considered. Multi-objective optimization was performed by improving the evolutionary algorithm of NSGA-II. Also the kind of material, quantity of layers and fiber orientations have been considered as design variables. After optimizing, Pareto front and corresponding points to Pareto front are presented. Trade of points which have optimized mass and cost were selected by determining the specified pressure as design criteria. Finally, an optimized model of composite cylindrical shell with the optimum pattern of fiber orientations having appropriate cost and mass is presented which can tolerate the maximum external hydrostatic pressure. 相似文献
14.
This paper deals with lateral-torsional buckling of beams which have already buckled locally before the occurrence of overall buckling. Due to the weakening effects of local buckling, the stiffness of the beam is reduced. As a result, overall lateral buckling takes place at a lower load than the member would carry in the absence of local buckling. The effective width concept is used in this investigation to account for the post-buckling strength in the buckled compression plate elements of the beam section. A finite element formulation in conjunction with effective width concept is presented. Due to the nonlinearity involved because of local buckling, an iterative procedure is necessary. Search techniques are used to find the load factor. The method combined with an analysis on nonlinear bending moment distribution can be used to analyze the lateral stability problem of locally buckled continuous structure. In this case, both elastic stiffness matrix and geometric stiffness matrix must be revised at each load level. A computer program has been prepared for an IBM 370/165 computer. 相似文献
15.
The buckling of the webs of steel beams is investigated analytically and experimentally. The influence of circular and rectangular holes on the buckling strength of beams of the dimensions normally used in building structures is considered. The buckling analysis is based on an energy method, and relies on finite element analysis for the in-plane stress distributions in the perforated webs. For the proportions of the beams considered, buckling takes place after the initiation of plasticity in the web and this is considered in the analysis. Comparison of analytical results with results of tests on five beams shows excellent agreement. It is shown that for these beams, the range of slenderness for which elasto-plastic buckling occurs is quite limited, and that below a web slenderness of 50, or in some cases more, holes of the shape and size considered will not lead to buckling prior to the development of full plastic strength. 相似文献
16.
An analytical answer to the buckling problem of a composite plate consisted of multi-scale hybrid nanocomposites is presented here for the first time. In other words, the constituent material of the structure is made of an epoxy matrix which is reinforced by both macro- and nanosize reinforcements, namely, carbon fiber (CF) and carbon nanotube (CNT). The effective material properties such as Young’s modulus or density are derived utilizing a micromechanical scheme incorporated with the Halpin–Tsai model. To present a more realistic problem, the plate is placed on a two-parameter elastic substrate. Then, on the basis of an energy-based Hamiltonian approach, the equations of motion are derived using the classical theory of plates. Finally, the governing equations are solved analytically to obtain the critical buckling load of the system. Afterward, the normalized form of the results is presented to emphasize the impact of each parameter on the dimensionless buckling load of composite plates. It is worth mentioning that the effects of various boundary conditions are covered, too. To show the efficiency of presented modeling, the results of this article are compared to those of former attempts. 相似文献
17.
A semianalytical, seminumerical method of solution is presented for the governing partial differential equation of rectangular plates subjected to in-plane loads. The basic functions in the y-direction are chosen as the eigenfunctions for straight prismatic beams. The classical method of separation of variables is employed to obtain an ordinary differential equation. The resulting equation is solved by a one-dimensional finite difference technique. The problem is then reduced to a typical eigenvalue problem which on solution yields the buckling coefficient of the plate. The method is applied on plates with different edge conditions and under various loading conditions. The results are compared with those of existing solutions. Results for the case when one loaded edge is fixed and the other simply supported were reported in the literature for the first time. 相似文献
18.
A Monte Carlo method for digital computer simulation of the strength of (steel) members and structures is presented and is applied to rolled steel beams and columns, and thin-walled cylinders. Input data are cumulative distribution functions (histograms) for the geometric and strength variables. The output (i.e. the scatter in structural strength) is printed as histograms and is statistically analysed.Each output histogram is compared with the Gaussian normal distribution. Using the nonparametric test of homogeneity a number of histograms may then be compared.The case studies presented deal with the plastic strength of steel beams and the maximum load of axially loaded steel columns and thin-walled cylinders. Mathematical models for beams subject to pure bending moment, moment and axial force, moment and shear, or uniform torsion are presented. For the initially straight, centrally loaded column a tangent modulus theory which considers residual stresses is used.The simulations have been carried out for one HEA beam, four HEB beams and three IPE beams. Comparison of the simulation results show that the scatter in load carrying capacity of the simulated beams and columns can be regarded as normally distributed, that the load carrying capacity of beams and columns of the same group (HEB or IPE) and beams and columns of the groups HEA and HEB have distributions which differ very little from each other, and that the scatter in simulated beam strength, and in simulated column strength for short and medium length columns, is much more affected by the variation in yield strength of the material than by the variation in cross sectional data. This conclusion holds for ordinary distributions in yield strength of structural carbon steel.Comparisons of simulation results and test results show good agreement for the beams. The agreement is not so good for the columns mainly because in the tangent modulus theory it is assumed that the columns are initially straight. For the cylinders excellent agreement was achieved.The experience gained with the simulation system presented here shows that a medium size computer can be economically used to simulate a relatively large number of plays. 相似文献
19.
For spatial stability analysis of shear deformable thin-walled curved beams with non-symmetric cross-sections, an improved analytical formulation is proposed. Firstly the displacement field is introduced considering the second order terms of semi-tangential rotations. Next an elastic strain energy is derived by using transformation equations of displacement parameters and stress resultants and considering shear deformation effects due to shear forces and restrained warping torsion. And then the potential energy due to initial stress resultants is consistently derived with accurate calculation of Wagner effect. In addition, closed-form solutions for in-plane and lateral-torsional buckling loads of curved beams subjected to uniform compression and pure bending are newly derived. In the companion paper, FE procedures are developed by using curved and straight beam elements with arbitrary thin-walled sections. In numerical examples, to illustrate accuracy and validity of this study, closed-form solutions for in-plane and out-of-plane buckling loads are presented and compared with those obtained from analytical solutions by other researchers. 相似文献
20.
目的 织物组织结构的3维几何模型是进行机织物的3维外观模拟和性能预测的基础。提出直接由组织结构参数建立机织物3维几何模型的方法。 方法 根据构成机织物组织交织规律的浮长序列、交叉数、飞数、经纬纱循环数等参数,建立单层织物的组织图矩阵生成的数学公式;结合组织图矩阵和织物中纱线的屈曲模型,采用直线和余弦曲线分段函数建立组织矩阵中组织点间纱线路径的数学公式,并基于椭圆截面模型实现机织物的3维模拟;通过对经、纬纱的 X或 Y坐标函数中引入修正因子,实现纱线路径的扭曲变形。 结果 实现不同组织类别、不同结构参数、不同纱线截面及基于均匀分布的纱线扭曲等条件下单层机织物的3维几何结构模拟,仿真效果较好。 结论 本文方法将组织图矩阵生成和织物结构3维建模两个过程结合,快速生成单层机织物的3维几何模型。通过实时更改结构参数,实现不同结构织物的模拟,而且可以模拟经、纬纱平面外扭曲现象。 相似文献
|