Fabrication and microwave absorption properties of magnetite nanoparticle–carbon nanotube–hollow carbon fiber composites

Absorbents with “tree-like” structures, which were composed of hollow porous carbon fibers (HPCFs) acting as “trunk” structures, carbon nanotubes (CNTs) as “branch” structures and magnetite (Fe₃O₄) nanoparticles playing the role of “fruit” structures were prepared by chemical vapor deposition technique and chemical reaction. Microwave reflection loss, permittivity and permeability of Fe₃O₄–CNTs–HPCFs composites were investigated in the frequency range of 2–18 GHz. It was proven that prepared absorbents possessed the excellent electromagnetic wave absorbing performances. The bandwidth with a reflection loss less than −15 dB covers a wide frequency range from 10.2 to 18 GHz with the thickness of 1.5–3.0 mm, and the minimum reflection loss is −50.9 dB at 14.03 GHz with a 2.5 mm thick sample layer. Microwave absorbing mechanism of the Fe₃O₄–CNTs–HPCFs composites is concluded as dielectric polarization and the synergetic interactions exist between Fe₃O₄ and CNTs–HPCFs.     

The processing and properties of (Zr,Hf)B2–SiC nanostructured composites

(Zr, Hf)B₂–SiC nanostructured composites were fabricated by high energy ball milling and reactive spark plasma sintering (RSPS) of HfB₂, ZrSi₂, B₄C and C. Highly dense composites with homogeneously intermixed ultra-fine (Zr, Hf)B₂ and SiC grains (100–300 nm) were obtained after RSPS at 1600 °C for 10 min. The densification was promoted by high energy ball milling and ZrSi₂ additive. The additives were almost completely transformed into ZrB₂ and SiC during densification. The improvement of flexural strength and fracture toughness (641 MPa and 5.36 MPa m^1/2, respectively) was achieved. The relationships between the ultra-fine microstructure and mechanical properties were discussed.     

Silicon core–iron siloxane shell nanoparticle polymer composites with multiferroic properties

Multiferroic (MF) composites based on nanoparticles consisting of a silica core and a shell of spin-variable Fe(III) complexes in a polymer matrix (polystyrene) were synthesized and characterized by different methods. The nanoparticles had the formula 80SiO₂·20{Fe[OSi(Me)(OEt)₂]₃}, and their particle size was on the order of 5–7 nm. Dielectric and electron spin resonance studies showed the presence of two types of Fe ions in the nanocomposite. Iron ions in the low-spin state [Fe(III)-LS] and iron ions in the high-spin state [Fe(III)-HS], which were bound by indirect exchange interactions through oxygen and silicon atoms {[Fe(III)-LS]─O─Si─O─[Fe(III)-HS]} were responsible for the MF properties of the composites with core–shell nanoparticles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47681.     

Nonoxide–boron nitride composites: in situ synthesis,microstructure and properties

Hexagonal graphitic boron nitride (h-BN) composites show excellent corrosion and thermal shock resistance, good mechanical tolerance and machinability, especially Si₃N₄–BN and Sialon–BN composites; they have already been used as break rings for horizontal continuous casting of steel. However, the strength of the conventionally processed BN composites were remarkably degraded by the addition of BN due to the poor densification behavior and the existence of large BN flakes or agglomerates of BN flakes that acted as fracture flaws. This means that BN dispersoids with fine particle size and homogeneous distribution are the key factors to obtain high strength composites. By in situ process, such microstructural features can be realized. In this work, by using the proposed in situ reactions, synthesis, microstructures and properties of various in situ nonoxide-boron nitride (Nobn) composites including SiC–BN, Si₃N₄–BN, AlN–BN, Sialon–BN and Alon–BN composites were investigated. For some Nobn composite systems, due to the large volume expansion during the reaction processes, near-net shape sintering can be realized. For example, the sintering shrinkage of AlN-30 vol.% BN was 3.1% and that of Alon-21 vol.% BN was 4.2%. This will be an advantage for the fabrication of large and complicated products.     

Synthesis,processing and properties of TaC–TaB2–C ceramics

Multi-phase ceramics in the TaC–TaB₂–C system were prepared from TaC and B₄C mixtures by reactive pressureless sintering at 1700–1900 °C. The pressureless densification was promoted by the use of nano-TaC and by the presence of active carbon in the reaction products. The presence of TaB₂ inhibited grain growth of TaC and increased the hardness compared to pure TaC. If a coarse TaC powder was used, the compositions did not densify. In contrast, pure nano-TaC was pressureless sintered at 1800 °C by the addition of 2 wt.% carbon introduced as carbon black or graphite. The introduction of carbon black resulted in fully dense TaC ceramics at temperatures as low as 1500 °C. The grain size of nominally pure TaC ceramics was a strong function of carbon stoichiometry. Enhanced grain size in sub-stoichiometric TaC, compared to stoichiometric TaC, was observed. Additional work is necessary to optimize processing parameters and evaluate the properties of ceramics in the TaC–TaB₂–C system.     

Polyaniline/polyacrylate core–shell composites: Preparation,morphology and anticorrosive properties

Polyaniline/partially phosphorylated poly(vinyl alcohol)/polyacrylate nanoparticles ((PAn/P-PVA)_x/PAc_y) were synthesized by encapsulation of varying amounts of PAn/P-PVA nanoparticles (x = 0.3, 0.5 or 0.7 g) with PAc (y = 4, 6 or 8 g acrylate monomers) via emulsifier-free emulsion polymerization. A monomer conversion level of 93.9% was achieved for the synthesis of the (PAn/P-PVA)_0.5/PAc₄ nanoparticles. X-ray diffraction analysis revealed that PAc was intercalated between the PAn/P-PVA layers, whilst transmission electron microscopy analysis of the different nanoparticles revealed they were spherical PAn/P-PVA agglomerates coated with PAc. Thermogravimetric analysis revealed that the thermal stability of the (PAn/P-PVA)/PAc nanoparticles decreased with increasing amounts of PAc. Cyclic voltammetry based analysis of the different (PAn/P-PVA)/PAc nanoparticles coated onto carbon fiber electrodes revealed that the PAn/P-PVA nanoparticles were encapsulated sufficiently by the non-conductive PAc and that the peak current decreased with increasing amounts of acrylate. With respect to the corrosion resistance in 1.0 M sulfuric acid, steel coated with the (PAn/P-PVA)_0.7/PAc₈ nanocomposite showed the best corrosion resistance (11.4%), but for the nanocomposites at each PAn/P-PVA loading level, the anticorrosive properties increased with increasing PAc levels, presumably due to the increasing tortuosity of the diffusion pathway through the coating for any corrosion agents.     

Synthesis,microstructure, and mechanical properties of WC–TiC–Co ceramic composites

A ceramic composite constituting the formula 78 wt% WC–16 wt% TiC–6 wt% Co denoted as the 78WC–16TiC–6Co ceramic composite was fabricated using a powder metallurgy process, by utilising commercially available WC and Co powders, and laboratory produced TiC powders. TiC powders were produced from machining chips of Grade 4 Titanium. Five different procedures were followed for the manufacturing process by altering the amount of the binding agent (stearic acid) and/or compacting pressure and/or sintering regime (temperature and time) and/or mixing process (dry mixing and mechanical alloying). Characterisation investigations conducted on the sintered samples revealed that stearic acid as the binding agent resulted in the decrease of the relative density while mechanical alloying (MA) induced finer microstructures. The 78WC–16TiC–6Co composites manufactured from commercially available and laboratory produced TiC powders using similar process procedures (including MA) exhibited similar characteristics in terms of relative density, hardness, and wear performance.     

Glucose sensing,photocatalytic and antibacterial properties of graphene–ZnO nanoparticle hybrids

A simple and efficient approach was developed to uniformly decorate graphene nanosheets with zinc oxide (ZnO) nanoparticles. A single source precursor, zinc benzoate dihydrazinate complex, has been used for the in situ generation of ZnO nanoparticles onto graphene at a relatively low temperature, 200 °C. Physico chemical analyses such as X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy revealed that ZnO nanoparticles were finely dispersed on the surface of graphene. ZnO–graphene hybrids were further characterized by Raman spectroscopy and ultraviolet visible spectroscopy and room-temperature photoluminescence. The materials exhibited excellent photocatalytic activity as evident from the degradation of methylene blue in ethanol under UV irradiation. An electrochemical glucose biosensor was fabricated by immobilization of glucose oxidase on the ZnO–graphene hybrids. This biosensor showed improved sensitivity towards glucose as compared to graphene. Also, the hybrids showed significant antibacterial activity against E. coli, gram negative bacteria. This simple and economical preparation strategy may be extended for the preparation of other graphene-based hybrids.     

Synthesis,characterization, and electrical properties of polypyrrole–bimetallic oxide composites

In this study, polypyrrole (PPy) and its bimetallic oxide composites (PPy–V₂O₅–MnO₂) were synthesized via a modified chemical oxidation polymerization method in the aqueous medium with FeCl₃·6H₂O as an oxidant. The synthesized materials were characterized with various analytical techniques to investigate their structural, crystallographic, thermal, morphological, optical, and electrical properties. The Fourier transform infrared study confirmed the successful synthesis of the materials, whereas the X-ray diffraction analyses showed the amorphous and crystalline natures of the PPy and PPy–V₂O₅–MnO₂ composites, respectively. The bimetallic oxide content improved the thermal stability of the composites, as ratified by thermal analysis. The synthesized PPy had a globular and spongy nature, whereas the composites were mixtures of short and long rod-shaped particles. The bimetallic oxide blend enhanced the doping, surface area and semiconducting nature of composites, and lower electrical resistance compared with those of the PPy. The resistance of the synthesized materials depended on the V₂O₅–MnO₂ blend content in the composites and the temperature. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 47680.     

Thermoset/graphene polymer composites—A review of processing and properties

Polymer-carbon nanocomposites incorporate the exceptional properties of both the polymer matrices, such as low cost and simple processing, with the distinctive features of the carbon-based fillers, such as high electrical and thermal conductivities, and excellent mechanical properties. Various fillers like carbon black (CB), graphite, expanded graphite (EG), and carbon nanotubes (CNTs) are being used to produce materials with advanced properties. However, at high filler loading, these filler materials have some major challenges such as filler agglomeration. Recently, graphene has gained increased interest as an alternative filler to produce polymer nanocomposites with advanced characteristics. Thermosetting polymer composites with graphene fillers are being considered for multiple applications and are a subject of interest for researchers because of enhanced properties like excellent corrosion resistance and low density. This review outlines studies to improve the mechanical, electrical, and thermal properties of thermoset/graphene composites.     

Effect of processing on the stability and electrical properties of pressureless sintered graphene oxide–alumina composites

This paper explores the processing of an alumina matrix composite with a percolating network of graphene oxide (GPO), which exhibits a moderate electric resistivity and a near zero temperature coefficient of resistance. Different formulations of GPO–alumina composites were processed using a water–base blending, and, the pellets were densified by pressureless sintering under Argon flow. Electrical conduction at room temperature was achieved in the 2 wt % GPO–alumina composite sintered at 1400 °C, and, the 3 wt % GPO–alumina composites sintered at 1400, 1550 and 1700 °C. An investigation of the degradation of electrical conductivity was used to identify potential stable operating regimes in which these materials could be used as heaters. Thermogravimetric analysis using the Ozawa–Flynn–Wall method, was used to determine the kinetic parameters of a 3 wt % GPO composite sintered at 1400 °C which, had an activation energy for GPO degradation of 195 ± 68 kJ/mol and, an estimated thermal lifetime of 8.7 ± 0.8 years for a conversion of 0.5 wt % (failure criterion) at an application temperature of 340 °C.     

Microstructure and mechanical properties of C/C–SiC composites fabricated by a rapid processing method

C/C–SiC composite was fabricated with time efficiency and low cost by a two-step process. A quasi 3D carbon-fiber-felt was firstly densified to C/C composite in 2–5 h by a thermal gradient CVI method based on precursor of kerosene. Then, the C/C composite of different porosities was reactively infiltrated with Si for 40 min to obtain C/C–SiC composite. The influence of the porosity of the C/C composite on the microstructure and mechanical properties of the C/C–SiC composite was investigated. The results show that the density of the C/C–SiC composite increases from 2.0 g/cm³ to 2.3 g/cm³ while its porosity decreases from 5.8% to 1.7% with the increasing porosity of the C/C composite. Moreover, the porosity of the C/C composite affects both the amounts of β-SiC, Si phases and the mechanical properties of the C/C–SiC composite. The flexural strength and modulus of the C/C–SiC composite are much higher than those of the C/C composite. The C/C–SiC composite from the C/C composite of 19.7% porosity has the highest flexural strength and modulus, which are 132 MPa and 14.4 GPa, respectively.     

Structure,microstructure and corrosion properties of brush-plated Cu–Ni alloy

Cu–Ni alloy coatings on copper substrate by the brush-plating process have been investigated using XRD and AFM. The X-Ray diffraction analysis revealed that the brush-plated Cu–Ni alloy was heterogeneous and composed of cubic Cu_3.8Ni phases. Uniform surface coverage of the substrate by granular morphology was observed from AFM. The corrosion protection performance of the brush-plated Cu–Ni alloy on copper substrate has been assessed using electrochemical corrosion tests. These results indicated a high charge transfer and low I _corr for the alloy system compared with copper deposits and the copper substrate.     

Densification,microstructure and mechanical properties of ZrB2–SiCw ceramic composites

ZrB₂–SiCw composites were prepared through hot-pressing at a low temperature of 1800 °C, and Al₂O₃ plus Y₂O₃ were added as sintering aids. Analysis revealed that additives may react with impurities (i.e. surface oxygen impurities and residual metallic impurities) to form a transient liquid phase, thus promote the sintering and densification of ZrB₂–SiCw composites. The content of additives was found to have a significant influence on the sinterability, microstructure and mechanical properties of ZrB₂–SiCw composites. ZrB₂–SiCw composite prepared with a small amount of additives (3 vol.%) provided the optimal combination of microstructure (relative density of 98.3%) and excellent properties, including flexural strength of 783 MPa and fracture toughness of 6.7 MPa m^1/2. With further addition of additives, SiC whiskers were inclined to gather together and be enveloped by excessive liquids to form core-rim-like structures, which lead to little decrease in mechanical properties.     

Reactive SPS for sol–gel alumina samples: Structure,sintering behavior,and mechanical properties

This work presents a fast and direct controlled routine for the fabrication of fully dense alumina based on the reactive spark plasma sintering (reactive-SPS) of boehmite (γ-AlOOH) nano-powders obtained by the sol–gel technique. The evolution of the transition aluminas during sintering has been studied. Some boehmite powders were seeded with α-Al₂O₃ particles prior to the gelation. Boehmite seeded powders exhibited a direct transition to α-Al₂O₃ at 1070 °C, enhancing the transformation kinetics and lowering the required temperature by more than 100 °C. For comparison, other samples were prepared by previously annealing the seeded and unseeded boehmite powders. Thus, α-Al₂O₃ powders were obtained and were sintered by standard-SPS. A detailed structural and mechanical characterization is presented, comparing the hardness and indentation fracture resistance for different grain sizes and porosities. Both the reactive-SPSed samples and the standard-SPSed samples showed a high hardness (18–20 GPa), whereas the reactive-SPSed samples exhibited a lower indentation fracture resistance due to a large grain size (～10 μm). Improvements of this procedure for obtaining smaller grain size are discussed. In summary, the presented technique brings a revolutionary fast method for the fabrication of fully dense alumina, as this process reduces the time and temperature required for alumina densification.     

Processing and mechanical properties of hydroxyapatite–polysulfone laminated composites

Designing biocomposites that mimic bone with specific mechanical properties of toughness and elastic modulus is a long-standing challenge in the biomaterials field. Traditional biocomposites comprise polymer matrices reinforced with ceramic particles. Laminated composites are structures also found in nature that can offer improved mechanical properties such as strength, elastic modulus and toughness. Hydroxyapatite/polysulfone laminated composites were fabricated to develop biologically compatible, toughened composites that would match the elastic modulus of bone. Multilayered composites were successfully designed with improved toughness measured by the work of fracture. Toughness measurements were more than an order of magnitude greater than monolithic hydroxyapatite. The toughness and modulus values of hydroxyapatite/polysulfone were within the range of cortical bone.     

Sintering and mechanical properties of tricalcium phosphate–fluorapatite composites

Tricalcium phosphate and synthesized fluorapatite powder were mixed in order to elaborate biphasic ceramics composites. The effect of fluorapatite addition on the densification and the mechanical properties of tricalcium phosphate were measured with the change in composition and microstructure of the bioceramic. The Brazilian test was used to measure the mechanical resistance of the tricalcium phosphate–26.52 wt% fluorapatite composites. The densification and rupture strength increase versus sintering temperature. The composites have a good sinterability and rupture strength in temperature ranging between 1300 and 1400 °C. Thus, the densification ultimate was obtained at 1350 °C and the mechanical resistance optimum reached 9.6 MPa at 1400 °C. Above 1400 °C, the densification and the mechanical properties were hindered by the allotropic transformation of tricalcium phosphate, grain growth and the formation of both intragranular porosity and many cracks. The ³¹P magic angle spinning nuclear magnetic resonance analysis of composites reveals the presence of tetrahedral P sites.     

Production and investigation of structure and properties of polyethylene–polylactide composites

Under conditions of shear deformations, low-density polyethylene (LDPE) and polylactide (PLA) composites are obtained in rotor disperser. The production of these composites allows one to use polymers derived from natural raw and to reduce the cost of the materials on their base. The addition of rigid PLA leads to increase in elastic modulus from 200 for LDPE to 1190 for LDPE–PLA (50:50 wt %) composites and in tensile strength from 13.3 for LDPE to 17.8 for LDPE–PLA. By differential scanning calorimetry method, it is shown that LDPE and PLA are incompatible. Using X-ray diffraction analysis, it is found that degree of crystallinity of composites decreases from 46.1 at 50:50 wt % to 36.9 at 80:20 wt % component ratios with the rise in LDPE content. Tests on fungus resistance show that the composites containing 50 wt % PLA are more resistant than the composites containing 30 wt % PLA. First by gel-permeation chromatography method, it is shown that composite degradation after exposure in soil is accompanied by the PLA chain scission and depolymerization with formation of monomers and dimers (M _w of PLA decreases from 118,860 to 80,100). The obtained composites can be applied as packaging materials. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47598.     

In situ synthesis,physical and mechanical properties of ZrB2–ZrC–WB composites

In this study, two composition ZrB₂–ZrC–WB composites were synthesized by reactive hot-pressing of Zr + B₄C + WC powder mixtures at 1900 °C. The microstructure of the resulting composites was characterized by a combination of scanning electron microscopy and X-ray diffraction. It is seen that highly-dense ZrB₂–ZrC–WB composites with a homogenous fine-microstructure were obtained after the sintering. The mechanical behavior of the composites was evaluated using by testing under four-point bend testing at room and high temperatures. The results show that the high-temperature strength of the ZrB₂–ZrC–WB composites was substantially improved, compared to ZrB₂–ZrC-based composites without WB. In addition, the elastic properties, electrical conductivity, hardness and fracture toughness of the composites were measured at room temperature. The results reveal that these properties were comparable to those of ZrB₂–ZrC-based composites without WB.