VPI-FP: an integrative information system for factory planning

Nowadays, one of the main challenges in factory planning is the consistent and coherent information modelling along planning processes. Despite the current efforts in the fields of virtual production as well as digital and virtual factory, planning and simulation applications mostly support only the analysis and the optimisation of single planning aspects. However, to match nowadays challenges, planners require solutions that provide an integrated view to evaluate planning scenarios in advance and to achieve increasing production quality and efficiency. The concept of virtual production intelligence (VPI) provides a basic concept for such an integrative information system that enables planners to integrate, to aggregate and to analyse data gathered during one planning project as well as to compare different projects. In this study, we present such an information system for factory planning using the concept of the VPI. The focus lies in particular on the information modelling as well as the information integration and evaluation. Therefore, the study presents theoretical basics and implementations of the VPI platform within a precise application scenario in factory planning. This is to process and provide a consolidated information base along the whole planning process to support factory planning projects.     

Agent-based knowledge management system with APQP: implementation of semiconductor manufacturing services industry

Future challenges posed to semiconductor manufacturing services firms demands a system framework which could not only introduce, development, and design new products into mass production with customer-acceptable quality level and profitable approaches, but also re-use best practice in the shop floor to continuously optimise the existing order fulfilment process with effectiveness and efficiency. Advanced product quality planning (APQP) tool integrated with agent-based knowledge management (KM) intelligence develops a systematic framework that responds to such challenges. We propose an APQP tool working with an agent-based knowledge management system (ABKMS) which builds on organisational knowledge resources and works with the APQP concept as well as KM agents. The proposed framework reflects how an APQP tool with KM agents seeks significant inroads into process knowledge repository to recommend a solution for decision making in delivering semiconductor manufacturing services in customer selection, parts and material selection, bill of material, equipments, and tools selection, with a modified APQP concept to work out the approach to be used to develop the streamlined and common process.     

A methodology for cutting-tool management through the integration of CAPP and scheduling

Tool management is an important element in the efficiency of flexible manufacturing systems. This paper improves manufacturing flexibility through integrated computer-aided process planning and scheduling with tool management. A new methodology for cutting-tool management is introduced, based on the use of alternative tools. In the methodology proposed, computer-aided process planning singles out all possible tool alternatives for each operation. The tool manager is designed to solve interferences between tool alternatives to make them compatible with scheduling. Interferences occur when the same tools are simultaneously needed in various machining operations. We propose a method to reduce tool alternatives. Thus, interferences disappear, and a collection of tool alternatives compatible with the scheduling of the system is obtained for machining operations. Tool management can use these sets of tools to plan tool changes that are necessary to face tool wear and to react to perturbations in the production system. To prove the response of our proposal, computational experiments are performed on randomly generated test problems.     

Production system redesign using realistic visualisation

The process of redesigning production systems is usually complex, for which virtual design tools are available. These tools are used to analyse and evaluate planned changes prior to implementation, making it possible to identify and prevent costly design mistakes. Despite this, design mistakes arise during and after the implementation. A source for design mistakes is incorrect or insufficient spatial data of the production systems used in the virtual design tools. The aim of this paper is to show how to reduce the time required for planning and implementing the redesign by supporting the process with realistic visualisation, created from accurate spatial data of the real production systems. Three industrial studies were carried out to evaluate how address realistic visualisation in order to support the redesign process. The result shows terrestrial 3D laser scanning to be suitable for capturing spatial data for realistic visualisation of production systems. The realistic visualisation can be used to virtually analyse design alternatives of the production systems, by, for example, combining the 3D laser scan data with 3D CAD models. The realistic visualisation enabling effective and accurate planning, which gives the opportunity to reduce the time required for planning and implementing redesigned production systems.     

Towards data-driven approaches in manufacturing: an architecture to collect sequences of operations

The technological advancements of recent years have increased the complexity of manufacturing systems, and the ongoing transformation to Industry 4.0 will further aggravate the situation. This is leading to a point where existing systems on the factory floor get outdated, increasing the gap between existing technologies and state-of-the-art systems, making them incompatible. This paper presents an event-based data pipeline architecture, that can be applied to legacy systems as well as new state-of-the-art systems, to collect data from the factory floor. In the presented architecture, actions executed by the resources are converted to event streams, which are then transformed into an abstraction called operations. These operations correspond to the tasks performed in the manufacturing station. A sequence of these operations recount the task performed by the station. We demonstrate the usability of the collected data by using conformance analysis to detect when the manufacturing system has deviated from its defined model. The described architecture is developed in Sequence Planner – a tool for modelling and analysing production systems – and is currently implemented at an automotive company as a pilot project.     

An event-driven manufacturing information system architecture for Industry 4.0

Future manufacturing systems need to be more flexible, to embrace tougher and constantly changing market demands. They need to make better use of plant data, ideally utilising all data from the entire plant. Low-level data should be refined to real-time information for decision-making, to facilitate competitiveness through informed and timely decisions. The Line Information System Architecture (LISA), is presented in this paper. It is an event-driven architecture featuring loose coupling, a prototype-oriented information model and formalised transformation services. LISA is designed to enable flexible factory integration and data utilisation. The focus of LISA is on integration of devices and services on all levels, simplifying hardware changes and integration of new smart services as well as supporting continuous improvements on information visualisation and control. The architecture has been evaluated on both real industrial data and industrial demonstrators and it is also being installed at a large automotive company. This article is an extended and revised version of the paper presented at the 2015 IFAC Symposium on Information Control in Manufacturing (INCOM 2015). The paper has been restructured in regards to the order and title of the chapters, and additional information about the integration between devices and services aspects have been added. The introduction and the general structure of the paper now better highlight the contributions of the paper and the uniqueness of the framework.     

Configuration design of scalable reconfigurable manufacturing systems for part family

Intense global competition, dynamic product variations, and rapid technological developments force manufacturing systems to adapt and respond quickly to various changes in the market. Such responsiveness could be achieved through new paradigms such as Reconfigurable manufacturing systems (RMS). In this paper, the problem of configuration design for a scalable reconfigurable RMS that produces different products of a part family is addressed. In order to handle demand fluctuations of products throughout their lifecycles with minimum cost, RMS configurations must change as well. Two different approaches are developed for addressing the system configuration design in different periods. Both approaches make use of modular reconfigurable machine tools (RMTs), and adjust the production capacity of the system, with minimum cost, by adding/removing modules to/from specific RMTs. In the first approach, each production period is designed separately, while in the second approach, future information of products’ demands in all production periods is available in the beginning of system configuration design. Two new mixed integer linear programming (MILP) and integer linear programming (ILP) formulations are presented in the first and the second approaches respectively. The results of these approaches are compared with respect to many different aspects, such as total system design costs, unused capacity, and total number of reconfigurations. Analyses of the results show the superiority of both approaches in terms of exploitation and reconfiguration cost.     

Kaizen costing for lean manufacturing: a case study

In the past decade due to increasing global competition US firms have radically changed their manufacturing practices to improve their competitiveness. In pursuing this goal they have adopted a number of advanced techniques, such as just-in-time, total quality management, lean manufacturing, flexible manufacturing systems, process improvement, and design for manufacturability, to name a few. The objectives of all these programmes have been to reduce cost, improve quality, reduce cycle time, and increase flexibility on the factory floor. Support systems such as finance and cost management, however, have generally not kept pace with the level of corresponding operational changes being implemented. This paper presents a case study of kaizen costing as practised by Boeing Commercial Airplane Company, IRC Division. The purpose of this study is to describe a method used to set kaizen costs which will provide relevant cost data to support lean production decisions that would be useful to practitioners.     

Application of genetic algorithms with dominant genes in a distributed scheduling problem in flexible manufacturing systems

Multi-factory production networks have increased in recent years. With the factories located in different geographic areas, companies can benefit from various advantages, such as closeness to their customers, and can respond faster to market changes. Products (jobs) in the network can usually be produced in more than one factory. However, each factory has its operations efficiency, capacity, and utilization level. Allocation of jobs inappropriately in a factory will produce high cost, long lead time, overloading or idling resources, etc. This makes distributed scheduling more complicated than classical production scheduling problems because it has to determine how to allocate the jobs into suitable factories, and simultaneously determine the production scheduling in each factory as well. The problem is even more complicated when alternative production routing is allowed in the factories. This paper proposed a genetic algorithm with dominant genes to deal with distributed scheduling problems, especially in a flexible manufacturing system (FMS) environment. The idea of dominant genes is to identify and record the critical genes in the chromosome and to enhance the performance of genetic search. To testify and benchmark the optimization reliability, the proposed algorithm has been compared with other approaches on several distributed scheduling problems. These comparisons demonstrate the importance of distributed scheduling and indicate the optimization reliability of the proposed algorithm.     

An active tool-tracking system for increased productivity

Keeping track of tools is essential for smooth running of any production unit. Being one of the critical resources for production, non-availability of tools can affect productivity of any manufacturing shop floor seriously. In this paper, a novel tool-tracking system, which can be used to monitor the movements of tools in a shop floor to prevent tool loss and tool hoarding, is described. The system uses miniature transmitters embedded in the tools together with a number of receiver stations located strategically around the shop floor. Each tool intermittently transmits a coded signal so that it may be identified as well as located. Simulation studies show that the system is effective particularly in situations where the productivity would have been low because of high tool losses.     

Intelligent decision support system for the adaptive control of a flexible manufacturing system with machine and tool flexibility

This paper describes an intelligent decision support system (IDSS) for real time control of a flexible manufacturing system (FMS). The controller is capable of classifying symptoms in developing the control policies on FMSs with flexibility in operation assignment and scheduling of multi-purpose machining centres which have different tools with their own efficiency. The proposed system is implemented by coupling of rule-based IDSS, simulation block and centralised simulation optimiser for elicitation of shop floor control knowledge. This posteriori adaptive controller uses a new bilateral mechanism in simulation optimiser block for offline training of IDSS based on multi-performance criteria simulation optimisation. The proposed intelligent controller receives online information of the FMS current state and trigger appropriate control rule within real-time simulation data exchange. Finally the FMS intelligent controller is validated by a benchmark test problem. Application of this adaptive controller showed that it could be an effective approach for real time control of various flexible manufacturing systems.     

Reactive manufacturing control using the ant colony approach

As a reaction to the volatile market demands with regards to the number and variants of products offered, ever more complex procedures for manufacturing control are being developed. Most recently, self-organising procedures, which often mimic the behaviour of natural systems, have arisen. The method of ant colony optimisation (ACO), which was inspired by ants, can provide the necessary fundamentals in order to realise self-organising manufacturing control. In this context, the ifab-Institute has developed the AntControl tool for self-organising manufacturing control based on ACO. In order to investigate the potential of ACO, several concepts have been developed and integrated into the existing OSim simulation tool to create the new OSim-Ant tool. An exemplary simulation study within a manufacturing system has been carried out to evaluate the behaviour of AntControl. This paper presents this tool as well as the results of the simulation study.     

Beschichten transparenter Kunststoffe mit Kratzschutz und AR in einer kombinierten InLine‐Anlage

For the last decades, both the ophthalmic and the precision optics industries have been relying on vacuum evaporation on the production floor. This particular thin film process is not very suitable for mass production. A major problem in mass production of high quality consumer products is the lack of automatic operation in single chamber evaporation coaters. This article describes a new coating process for lenses which uses both PECVD and sputtering technologies. A new InLine machine equipped with these technologies is presented. This machine meets all requirements with respect to process stability and automation for the respective industry. With its modular design concept, this coating machine can be totally integrated into an InLine factory floor. It can also easily be scaled up or down for a wide range of applications. Given the excellent quality that has been achieved for hardcoat and antireflective coating of plastic eyeglass lenses, similar results can be expected in other thin film applications for a wide range of temperature sensitive substrates in precision optics.     

复杂型材智能加工制造系统的设计

目的 实现新一代信息技术背景下传统铝门窗幕墙型材加工行业的转型升级,以应对复杂型材加工制造存在的成本高、工序繁多等诸多挑战。方法 根据型材加工工艺流程及该行业定制化生产的特点,提出一种涵盖网上下单、订单自动处理、机床智能加工生产的复杂型材智能加工制造系统架构,重点针对自主开发的门窗幕墙型材一站式加工智能机床,研发出一套复杂型材智能加工制造系统。结果 研究了加工信息数字化模型、工艺数据库等关键技术。通过工艺数据库的构建,实现了自动编程系统的搭建。结合Web Service与XML技术,研发出订单自助处理系统、机床智能操作管理系统及其与ERP系统的集成互连,打通了生产各环节之间的技术壁垒,形成了复杂型材一体化加工工艺。结论 实际测试表明,经复杂型材智能加工制造系统一体化制造的复杂型材从接受订单到产品加工完成只需40分钟,大幅提高了生产效率和产品质量,降低了加工成本。本研究为复杂型材智能加工及其他传统制造行业的转型升级提供了有益的借鉴和参考。     

一种新型物料装置在汽车零部件生产中的应用研究

介绍一种由新型材料制作适用于中小型零件加工、装配和搬运的组合式物料装置及其在汽车零部件生产中的应用。用该材料设计制作的组合式物为装置具有轻便、灵活、可重复使用等特点，能够有效地提高生产率和降低工人的劳动强度。     

Unified representation of fixtures: clamping,locating and supporting elements in CNC manufacture

A CNC machining operation is the outcome of the application of the integrated capabilities of various resources within the CNC machining centre. Part fixtures, clamping and other location mechanisms are essential subsets of CNC machining resources. Today, various fixturing techniques and attachments available in the market allow manufacturers to enhance their production capability without buying expensive machine tools. This technology-rich fixturing domain is detached while representing and exchanging machine tool resource information for making manufacturing decisions. The research work in this article utilises the STEP-NC compliant unified manufacturing resource model (UMRM) for representing fixtures in conjunction with the parent CNC machining centre. Thus, UMRM is enhanced in this context to represent various fixtures such as universal vises, chucks, pallets and auxiliary rotary tables among others. The major contribution of this article is the application of the extension of the UMRM approach for representing fixturing domain, which allows generic modelling of fixtures and loading devices in addition to machine workpiece and process modelling. This would enable the stage of automated process planning and manufacturing. The universal approach in representing resource information allows the data to be utilised for making a wide variety of manufacturing decisions.     

The tool transporter movements problem in flexible manufacturing systems

We consider a job sequencing and tool transporter movements problem on a single flexible machine with limited tool magazine capacity. A tool transporter having limited capacity is used in transporting the tools between the machine and tool crib area. Our aim is to minimize the number of the tool transporter movements. We present several lower and upper bounds, propose a Branch-and-Bound algorithm and a Beam Search procedure, and report results from a computational experiment. We find that optimal solutions can be quickly obtained for medium-sized instances with 25 jobs and 25 tools. For large-sized problem instances, Beam Search provides high quality solutions very quickly. Finally, we address the problem of minimizing the total flow time.     

Performance analysis for tandem manufacturing lines under variable structure production control method

In this paper we introduce novel results for the performance of the surplus-based decentralised production control method. The main objective of this production method is to guarantee that the cumulative number of produced products follows the cumulative production demand on the output of any given network. As a starting point of our research a general idea of this method is presented for the case of one manufacturing machine. Then our analysis is extended to a line of N machines. The proposed methodology is reformulated in terms of variable structure control. The production flow process is described by means of difference equations and, in order to analyse the performance, the Lyapunov theory approach is exploited. The results obtained for the production error bounds for each machine in the line and for the buffer content bounds for each intermediate buffer are discussed. Performance and robustness issues of closed-loop flow line models are illustrated by numerical simulations. It is shown that the method can be implemented in enterprise planning tools.     

Competitive and sustainable manufacturing by means of ultra-efficient factories in urban surroundings

The rapid growth of the world population, the finiteness of resources on our planet Earth and the ongoing tendency towards urbanisation result in the need to question our actions and economic activities, also for industrial enterprises. A paradigm shift to decouple growth and resource utilisation is needed. By means of ultra-efficiency, factories are targeted, whose positive impact to their surrounding is optimised instead of only minimising negative influences. In the contribution, the concept of ultra-efficient factories and first tools for their implementation are introduced. Therefore, the term ultra-efficient factory is defined based on the state of the art. On this definition, spheres of activity for ultra-efficient factories under consideration of urban surroundings are determined. For the spheres of activity, criteria to assess the according maturity of companies are identified and aggregated into a comprehensive maturity model. The maturity model enables the determination of potentials for advancements of companies. To support the industrial application of the theoretic work, industrial best practices are determined and a visual tool is developed.     

Order sequencing and capacity balancing in synchronous manufacturing

Synchronous manufacturing aims at achieving the benefits of intermittent production lines in production situations that operate without lines. Benefits such as short and constant throughput times and predictable capacity loading can be acquired through an appropriate design of the synchronous manufacturing system and its control system. The order release mechanism is an essential part of this control system. It determines the sequence in which orders are released to the shop floor. As orders may differ in the amount and distribution of their capacity requirements over subsequent production stages, total capacity load may vary over time. If the available capacity per period is not flexible, capacity balancing becomes an issue in the order release decision. In practice, heuristics or rules of thumb are used to solve this problem, but their effectiveness is questioned. This paper examines the effectiveness of some new heuristics that are based on insights from assembly system design and work load control, and compare their performance with an optimal solution approach. The approaches are evaluated in a rolling schedule environment, and under different levels of capacity fluctuations and problem sizes. The results show that the performance of the heuristic solutions deteriorates if capacity fluctuations between the stages increase. If we measure both the amount and frequency of shortages over a long period of time in a rolling schedule environment, a quite simple rule that only takes the available capacity during the first stage into account outperforms more intelligent rules.