Sequencing the storages and retrievals for flow-rack automated storage and retrieval systems with duration-of-stay storage policy

Sequencing of storages and retrievals is an important topic in the automated storage and retrieval system (AS/RS), which largely influences the throughput performance and the operational cost of an AS/RS. In this paper, the problem of sequencing the storages and retrievals in a flow-rack AS/RS with duration-of-stay storage policy is analysed and a two-step heuristic called the grouping-matching method is proposed for minimising the total travel time of operations. The proposed grouping-matching method assigns unit-loads into groups in the grouping step and matches groups and bins of flow rack in the matching step. Two grouping heuristics are designed for the grouping step. The matching subproblem is formulated as an assignment to be solved. Simulation experiments are conducted to evaluate the effectiveness and efficiency of the grouping-matching method and the two grouping heuristics used for the grouping subproblem.     

Analytical models for analysis of automated warehouse material handling systems

Automated storage and retrieval systems (AS/RSs) and autonomous vehicle storage and retrieval systems (AVS/RSs) are two competing technologies for the handling, storage and retrieval of unit-loads in the reserve section of an automated warehouse. In this paper, we model variants of the two systems as an open queuing network (OQN) and use an existing tool for the analysis of OQNs, called the manufacturing system performance analyser (MPA), for analysing the performance of the AS/RS and AVS/RS. Experimental results are provided to show that MPA is a better choice than simulation to quickly evaluate alternate configurations of the two systems. We use MPA to answer a series of design questions for AS/RS and AVS/RS design conceptualisation.     

A heuristic travel time model for random storage systems using closest open location load dispatching

A heuristic method is proposed for estimating travel times in unit load random storage systems where incoming loads are dispatched to the closest available storage positions. A queuing model representation is used where servers correspond to storage positions and the service rate is based on the turnover distribution of stored loads. The resultant state distribution is applied to approximate storage position occupancy probabilities useful for generating storage and retrieval travel time estimates. Computational results suggest that the heuristic procedure yields smaller errors in random storage travel time estimates than alternative models.     

Retrieval sequencing for unit-load automated storage and retrieval systems with multiple openings

Automated storage and retrieval systems (AS/RS) have made a dramatic impact on material handling and inventory control in warehouses and product systems. A unit-load AS/RS is generic and other AS/RS represent its variations. In this paper, we study a problem of sequencing retrieval requests in a unit-load AS/RS. In a unit-load AS/RS, there are usually multiple openings and a unit-load can be stored in any opening. Given a list of retrieval requests and the locations of openings, this problem seeks a sequence of dual cycles that minimizes total travel time taken by a storage/retrieval machine. Previous researchers believed that this problem is computationally intractable and provided greedy-style heuristic algorithms. In this paper, we present an algorithm that combines the Hungarian method and the ranking algorithm for the assignment problem with tour-checking and tour-breaking algorithms. We show that this algorithm finds either a verified optimal or near-optimal solution quickly for moderate size problems. Using this algorithm, we also evaluate the effectiveness of the existing simple heuristics. Computational results are reported.     

Optimal routing in an automated storage/retrieval system with dedicated storage

We address the sequencing of requests in an automated storage/retrieval system with dedicated storage. We consider the block sequencing approach, where a set of storage and retrieval requests is given beforehand and no new requests come in during operation. The objective for this static problem is to find a route of minimal total travel time in which all storage and retrieval requests may be performed. The problem of sequencing a list of retrievals is equivalent to the Traveling Salesman Problem (TSP), and thus NP-hard in general. We show that the special case of sequencing under the dedicated storage policy can be solved in polynomial time. The results apply to systems with arbitrary positions of the input and output stations. Tlus generalizes the models in the literature, where only combined input/output stations are considered. Furthermore we identify a single command area in the rack. At the end we evaluate the model against heuristic procedures.     

Simulation study of an automated storage/retrieval system

In this paper we present a simulation study of an automated storage/retrieval system and examine a wide variety of control policies. We compare several storage location assignment policies. For the class-based storage policy, we apply a recent algorithm that enables us to evaluate the trade-off between storage space requirements and travel times. We also study a new storage location policy which combines low storage space requirements with short mean travel times. Furthermore, we study the sequencing of storage and retrieval requests whereby we focus on the trade-off between efficient travel of the S/R machines and response time performance.     

Dual command travel times and miniload system throughput with turnover-based storage

We analyze travel times for automated storage/retrieval systems. In particular, we apply our travel time model to turnover-based storage systems and determine the mean and variance of dual command travel times. We present detailed numerical results for selected rack shape factors and ABC inventory profiles. We then investigate the effect of alternative rack configurations on travel time performance measures. We also show how to determine the throughput of miniload systems with turnover-based storage and exponentially distributed pick times.     

Multi-shuttle automated storage/retrieval systems

Multi-shuttle automated storage/retrieval systems have been developed for use in factories and distribution centers because they are more efficient than single-shuttle systems (owing to less empty travel). This improved efficiency results in more agile support (flexible response, less waiting time, etc.) for the production system the storage/retrieval system serves. In this paper we develop analytical models to estimate the throughput in multi-shuttle systems. Throughput improvements greater than 100% are illustrated when triple-shuttle systems are compared with single-shuttle systems.     

Routing problem under the shared storage policy for unit-load automated storage and retrieval systems with separate input and output points

In this study the routing problem for unit-load automated storage and retrieval systems (AS/RSs) with separate input and output points is considered under the shared storage policy. The problem is to find an optimal travel route of a S/R (storage and retrieval) machine to process given storage and retrieval requests so that the total travel time is minimised, where the input and output points are possibly separate and the shared storage policy is assumed. We first give two types of formulations as 0–1 integer linear programming problems corresponding to two types of dwell point settings: the dwell point is the input point and the output point. Next, we propose a simple but efficient exact solution algorithm based on the formulations that utilises a general MILP (Mixed Integer Linear Programming) solver. Its efficiency is then demonstrated by numerical experiments. Instances with 400 items (200 for each storage and retrieval) are solved within 100 s.     

Propagation of unit location uncertainty in dense storage environments

Dense storage systems provide high-space utilisation; however, because not all units are immediately accessible, selectively offloading units can require shifting of other stored units in order to access the requested unit. Given an initial certainty in unit location, a discrete time Markov Chain is developed to quantify the growth of unit location uncertainty as a function of retrieval requests. As the first to mathematically model uncertainty propagation in dense storage operations, metrics are developed to analyse the model. A theoretical understanding of the relationship among storage density, retrieval times and unit location uncertainty is provided. Finally, a case study using inventory and load plan data from a military application illustrates how the developed models can be used by managers to evaluate selective offloading policies and layouts.     

Travel time models for double-deep automated storage and retrieval systems

In this paper new analytical travel time models for the computation of cycle times for unit-load double-deep automated storage and retrieval systems (in continuation double-deep AS/RS) are presented. The proposed models consider the real operating characteristics of the storage and retrieval machine and the condition of rearranging blocking loads to the nearest free storage location during the retrieval process. With the assumption of the uniform distributed storage rack positions and the probability theory, the expressions of the single and modified dual command cycle have been determined. The proposed models enable the calculation of the mean cycle time for single and dual command cycles, from which the performance of the double-deep AS/RS can be evaluated. A simulation model of the selected double-deep AS/RS has been developed to compare the performances of the proposed analytical travel time models. The numerical analyses show that with regard to the examined type of double-deep AS/RS with a different fill-grade factor, the results of the proposed analytical travel time models correlate with the results of simulation models of double-deep AS/RS.     

Interleaving models for the analysis of twin shuttle automated storage and retrieval systems

A system of state equations is formulated for describing the dynamic behaviour of the queue of storage and retrieval transactions in a storage aisle served by twin shuttle storage and retrieval (S/R) machines. Using estimates of order picking cycle times in conjunction with storage and retrieval transaction demand levels, an estimate of the probability distribution of storage queue states is derived for a given storage aisle. System performance measures under an opportunistic interleaving discipline including S/R machine utilization, transaction queue lengths, average cycle times and expected transaction waiting times are approximated using the state probability distribution. The modelling tools are demonstrated using sample problems where the performance of twin versus single shuttle systems is contrasted for alternative combinations of storage and retrieval machine travel speeds, storage rack configurations, and transactions demand scenarios.     

Travel-time models considering the operating characteristics of the storage and retrieval machine

Existing travel-time models of automated storage/retrieval systems (AS/RS) assume the average uniform velocity, ignoring the operating characteristics of storage/retrieval (S/R) machine such as the acceleration/deceleration rate and the maximum velocity. Consequently, the optimal design and schedule based on the existing models is far from optimal from the practical point of view. This paper presents continuous analytical models of travel time which integrate the operating characteristics of S/R machine. Using a randomized assignment policy, travel times are determined for both single and dual command cycles. The models developed are examined through discrete evaluation procedures.     

A decision model to determine the number of shuttles in a tier-to-tier SBS/RS

Shuttle-based storage and retrieval systems (SBS/RSs), which are designed to increase throughput capacity and flexibility, are a type of automated storage and retrieval system used for lightweight loads. SBS/RSs can increase throughput capacity by using multiple shuttles and elevators as storage and retrieval machines (SRMs). They can also facilitate improvements in flexibility since they are able to adjust the number of SRMs according to transaction demands. Thus, determining the number of shuttles is an important issue in tier-to-tier SBS/RSs. In this paper, a decision model to determine the number of shuttles is proposed. The model is based on the travel time model, and it considers parameters such as the physical configuration, velocity profile and the probability that the shuttle operates a dual command. Finally, the throughput capacity from the travel time model is compared with that from a simulation-based approach in order to verify the effects of the model. In addition, a critical discussion regarding the characteristics of the tier-to-tier system is provided.     

A storage assignment policy in a man-on-board automated storage/retrieval system

This paper deals with a man-on-board automated storage/retrieval system where each customer order consists of a number of different items and is picked one at a time. For the system the problem examined is to allocate storage locations dedicatedly to items so that the total travel time required to pick all the given orders per period is minimized. The problem is shown to be formulated as a variant of the generalized assignment model. A heuristic for the storage layout problem is developed based on the group technology concept considering both order structure and frequency. Through the heuristic, close relationships between items are identified from the order structure, and then based on the relationships the items are compelled to be stored closely in the storage rack following a space-filling curve. Experimental results are provided to describe the performance of the heuristic     

Theoretical and experimental studies of hologram multiplexing that uses a random wave front generated by photorefractive beam fanning

A hologram multiplexing technique-that uses random wave fronts generated by photorefractive beam fanning is investigated. A storage photorefractive crystal generates various random wave fronts to be used as reference beams without the external diffusers such as ground glass and multimode optical fiber that are generally employed. We experimentally demonstrate hologram multiplexing with six images and show that the stored holograms can be selectively retrieved. We also simulate photorefractive beam fanning inside a BaTiO3 crystal, in particular regarding the correlation properties of the fanning beams for the first time to our knowledge, and reveal the conditions of incidence of an object beam and a reference beam required for suppressing image degradation, implementing low-cross-talk retrieval, and producing a large number of stored holograms.     

A Stock Location Model for Dual Address Order Picking Systems

A model is formulated to evaluate alternative stock levels and item locations for dedicated storage warehouses where storage and retrieval transactions are interleaved to economize on travel of the order picking vehicle. The model can be used to measure the order picking and inventory cost effects of warehouse layouts representing alternatives to application of economic lot sizing and cube per order index storage assignment. A simple, sequential search heuristic is proposed for generating such alternative warehouse layouts and applied to a sample problem.     

Enhancing performance in order picking processes by dynamic storage systems

Increasing productivity and reducing labour cost in order picking processes are two major concerns for most warehouse managers. Particularly picker-to-parts order picking methods lead to low productivity as order pickers spend much of their time travelling along the aisles. To enhance order picking process performance, an increasing number of warehouses adopt the concept of dynamic storage where only those products needed for the current order batch are dynamically stored in the pick area, thereby reducing travel time. Other products are stored in a reserve area. We analyse the stability condition for a dynamic storage system with online order arrivals and develop a mathematical model to derive the maximum throughput a DSS can achieve and the minimum number of worker hours needed to obtain this throughput, for order picking systems with a single pick station. We discuss two applications of dynamic storage in order picking systems with multiple pick stations in series. In combination with simulation modelling, we are able to demonstrate that dynamic storage can increase throughput and reduce labour cost significantly.     

Travel-time models and fill-grade factor analysis for double-deep multi-aisle AS/RSs

Double-deep multi-aisle automated storage/retrieval systems are increasingly applied for storing and retrieving unit loads, with advantages of increased space utilisation, reduced number of aisles and improved efficiency of storage rack (S/R) machines. In such systems, the retrieval process may consist of the rearrangement of blocking loads, based on the assumptions of uniformly distributed storage locations and random storage policy. We formulate analytical travel-time models of both single- and dual-command cycles under three rearrangement rules. We validate the analytical travel-time models by simulation and conduct numerical experiments to analyse the effect of the number of aisles an S/R machine serves, the fill-grade factor and the command cycles on the expected travel time of the S/R machine. The results show that the expected travel time of the S/R machine is increasing with the increase in the number of aisles an S/R machine serves and the increase in the fill-grade factor, and dual command cycle outperforms single-command cycle in terms of cycle time. To deal with the trade-off between the storage space cost and the operational cost of the S/R machine, we develop a decision model for finding an optimal fill-grade factor to minimise the total cost. We find the condition when an optimal fill-grade factor exists and show how to calculate it. Based on the decision model, we compare the performance of double-deep multi-aisle automated storage/retrieval system (AS/RSs) and single-deep single-aisle AS/RSs. The results show that double-deep multi-aisle AS/RSs outperform single-deep single-aisle AS/RSs in terms of total cost, although double-deep multi-aisle AS/RSs need more storage locations.     

Intelligent control schemes for automated storage and retrieval systems

A new information system approach to the operational controls of automated storage and retrieval systems (AS/RS) is developed and examined. This approach is based on artificial intelligence, state-operator framework for problem solving. Gradually increasing the information level, several operational goal functions are identified for an industrial unit-load food produce AS/RS. These functions use real-time statistical interpolations to select the desired storage and retrieval bins. As a result the AS/RS response adapts itself to stochastic perturbations in the system conditions. Experimental evaluations using multiple variance analysis technique and detailed simulations have shown that the proposed dynamic approach is superior to the common industrial control method currently used in those industrial systems characterized by batch arrivals (and retrievals) of the UL's and non-stationary demand patterns, These evaluations further suggest that improved performance is realized with the increase in the information level. The operational control scheme developed in this paper appears to be an excellent control alternative for unit-load AS/RSs. This is due to its limited computational requirements and the augmented productivity as demonstrated here for a real case study.