Catalysts for the ring-opening polymerization of ε-caprolactone and l-lactide and the mechanistic study

Two novel magnesium aryloxides have been prepared and their catalytic activities toward ring-opening polymerization (ROP) of ε-caprolactone and l-lactide have been investigated. The reaction of 2,2′-(2-methoxybenzylidene)-bis(4,6-di(1-methyl-1-phenylethyl)phenol) (MEMPEP-H₂) (1) and 2,2′-methylene-bis(4,6-di(1-methyl-1-phenylethyl)phenol) (MMPEP-H₂) with ⁿBu₂Mg yield dimeric magnesium complexes [Mg(μ-MEMPEP)(THF)]₂ (2) and [Mg(μ-MMPEP)(THF)]₂ (3), respectively. Catalytic studies of complexes 2 and 3 illustrate that both 2 and 3 are good catalysts in ε-caprolactone and l-lactide polymerization. Theoretical study of the ROP mechanism of ε-caprolactone catalyzed by 2 demonstrates that the initiator, benzyl alcohol, is activated by the formation of a hydrogen bond with the phenoxy oxygen of MEMPEP²⁻ ligand.     

Preparation and characterization of poly(?-caprolactone)-b-polyacrylonitrile (PCL-b-PAN) and poly(l-lactide)-b-polyacrylonitrile (PLLA-b-PAN) copolymers by aluminum and lithium alkoxides containing double-headed initiators

Three new metal alkoxides, [(MMPEP)Al(μ-OCH₂C₆H₄CH₂Cl)]₂ (1), [(MMPEP-H)Li·(BnOH)]₂ (2) and [(MMPEP-H)Li·(HOCH₂C₆H₄CH₂Cl)]₂ (3) (MMPEP-H₂: 2,2′-methylene-bis{4,6-di(1-methyl-1-phenylethyl)phenol}) have been synthesized and characterized. Complex 1 was prepared by the reaction of [(MMPEP)Al(CH₃)(Et₂O)] with p-(chloromethyl)benzyl alcohol. Followed by the reaction of MMPEP-H₂ with ⁿBuLi, BnOH or p-(chloromethyl)benzyl alcohol was added to give complexes 2 and 3, respectively. Complex 1 has shown excellent catalytic activity towards ring-opening polymerization (ROP) of ?-caprolactone. Both complexes 2 and 3 are active for ROP of l-lactide. Block copolymers of poly(?-caprolactone)-b-polyacrylonitrile (PCL-b-PAN) and poly(l-lactide)-b-polyacrylonitrile can be synthesized by combining a technique of atom transfer radical polymerization (ATRP) and ROP using a double-headed initiator. Microphase-separated morphology of PCL-b-PAN has been observed by transmission electron microscopy, indicating the formation of self-assembled nanostructure.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Perylene diimide-appended mixed (phthalocyaninato)(porphyrinato) europium(III) double-decker complex: Synthesis, spectroscopy and electrochemical properties

Treatment of sandwich-type mixed (phthalocyaninato)(porphyrinato) metal complex [HEu^III{Pc(α-3-OC₅H₁₁)₄}{TriBPP(NH₂)}] (3) [Pc(α-3-OC₅H₁₁)₄ = 1,8,15,22-tetrakis(3-pentyloxy)-phthalocyaninate, TriBPP(NH₂) = 5,10,15-tris(4-tert-butylphenyl)-20-(4-aminophenyl)porphyrinate] with N-n-butyl-1,6,7,12-tetra(4-tert-butylphenoxyl)perylene-3,4-dicarboxylate anhydride-9,10-dicarboxylate imide (2) in the presence of imidazole in toluene afforded the novel perylene diimide-appended mixed (phthalocyaninato)(porphyrinato) europium(III) double-decker complex (5). Porphyrin-PDI dyad 4 was also obtained by similar method. The electronic absorption spectroscopic and electrochemical properties of PDI-appended double-decker 5 and the model compounds 2, 3, and 4 were studied, the results indicated that there was no considerable ground-state interaction between the double-decker unit and the PDI unit in 5. The fluorescence measurements revealed that the emission of PDI unit was effectively quenched by the double-decker unit, suggesting remarkable intramolecular interaction in 5 under excited state.     

Synthesis of polystyrene microgel with glucose as hydrophilic segment via controlled free-radical polymerization

4-Vinylbenzyl glucoside peracetate (1) was copolymerized with divinylbenzene (DVB) using 1-phenyl-1-(2′,2′,6′,6′-tetramethyl-1′-piperidinyloxy)ethane (2) as an initiator in m-xylene at 138 °C for 20 h ([DVB]/[2]=28; [DVB]=0.62 mol L⁻¹). The copolymerizations were performed using the mole fraction of 1 in the total feed of 1 and DVB (F₁: [1]/[1]+[DVB]) ranging from 0.11 to 0.38 that produced the polystyrene (PSt) microgel with acetyl glucose, 3, in 46-53% yields. Dynamic laser light scattering (DLS) measurements showed that 3 was stably suspended in toluene as particles with average diameters (d's) ranging from 12 to 22 nm. A static laser light scattering (SLS) measurement gave the average molar mass, M_w,SLS, of 3 that ranged from 9.69×10⁴ to 6.96×10⁵. The numbers of the 1, 2, and DVB units in 3 (N₁, N₂, and N_DVB, respectively) were from 111 to 238, from 17 to 208, and from 350 to 4510, respectively. The deacetylation of 3 was achieved by treatment with sodium methoxide in dry 1,4-dioxane to produce the PSt microgel with glucose as the hydrophilic segment, 4. The solubilities of 4 in toluene, CHCl₃, THF, 1,4-dioxane, pyridine, DMF, DMSO, and H₂O, and the mixture of H₂O and 1,4-dioxane were examined, indicating that a hydrophilic property had been effectively introduced into 4.     

Synthesis and characterization of biodegradable polylactides and polylactide-block-poly(Z-lysine) copolymers

The reaction of (R,R)-trans-1,2-bis(2,4,6-triisopropylbenzenesulfonamidato)cyclohexane (^RRTBSC-H₂, 1) with MN[Si(CH₃)₃] in tetrahydrofuran (THF) produces [(^RRTBSC)₂M₄(THF)₄] (2: M = Li, 3: M = Na, 4: M = K). Experimental results show that all three complexes 2-4 are active toward the ring-opening polymerization of l-lactide and compound 2 efficiently catalyzes the polymerization of l-lactide in the presence of a variety of alcohols in a controlled fashion with very narrow polydispersity index. In addition, a variety of biodegradable poly(l-lactide)-block-poly(N_ξ-carbobenzyloxy-l-lysine) block copolymers with different ratios have also been synthesized using poly(l-lactide) containing amino chain end (PLLA-NH₂) as a macroinitiator.     

Synthesis and properties of optically active substituted polyacetylenes having carboxyl and/or amino groups

Polyacetylenes having carboxyl and/or amino groups in the side chain were synthesized by the polymerization of N-(2-propynyloxycarbonyl)-l-alanine (1) and l-alanine N-propargylamide (2) catalyzed with a rhodium cation complex. Poly(1_0.5-co-2_0.5) exhibited a larger CD signal than the homopolymers. The polymer mixtures obtained by the polymerization of 1 in the presence of poly(2), and those obtained by the polymerization of 2 in the presence of poly(1) showed specific rotations larger than calculated. The polymerization of propargylamine in the presence of poly(1) did not exhibit significant effect, while the polymer mixtures obtained by the polymerization of propiolic acid in the presence of poly(2) exhibited [α]_D of positive sign, although poly(2) alone exhibited [α]_D of negative sign.     

Redox and catalytic properties of new polypyrrole modified electrodes functionalized by [Ru(bpea)(bpy)H2O] complexes; bpea=N,N′-bis(2-pyridylmethyl)ethylamine, bpy=2,2′-bipyridine

New ruthenium(II) complexes containing one or two pyrrole-functionalized polypyridylic ligands have been prepared in order to study their electrochemical behaviour in heterogeneous phase, after anodic polymerization from CH₂Cl₂ solution on an electrode surface. Complexes containing one pyrrole unit have general formula [Ru(bpea-pyr)(bpy)(L)]²⁺ (bpea-pyr=N-[3-bis(2-pyridylmethyl)aminopropyl]pyrrole, bpy=2,2′-bipyridine, L=Cl, complex 3, or L=H₂O, complex 1), whereas compounds having two pyrrole units correspond to [Ru(bpea-pyr)(bpy-pyr)(L)]²⁺ (bpy-pyr=4-methyl-4′-pyrrolylbutyl-2,2′-bipyridine, L=Cl, complex 4, or L=H₂O, complex 2). Upon oxidative polymerization, all complexes form highly stable polypyrrolic films on a graphite disk electrode surface. An electrode modified with complex 2 polypyrrole coating film, C/poly-2, has been tested as heterogeneous catalyst for the oxidation of benzyl alcohol, showing a remarkably high efficiency and notably improving the results obtained with analogous complexes in homogeneous phase.     

Initiator efficiency in ATRP: the tosyl chloride/CuBr/PMDETA system

The low efficiency of p-toluenesulfonyl chloride (TsCl) initiator for the polymerization of methyl methacrylate (MMA), when used in conjunction with N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) and CuBr under atom transfer radical polymerization (ATRP) conditions was investigated. A major by-product in the formation of poly(methyl methacrylate) was identified as N,N-dimethyl-p-toluenesulfonamide (5) and accounted for approximately half of the initiator. Compound 5 was shown to form by the direct reaction of PMDETA and TsCl. In a model experiment equimolar amounts of TsCl, PMDETA and CuBr reacted at 80°C in p-xylene resulted in the formation of 5 and two other unsaturated sulfones 2-methyl-3-[(4-methylphenyl)sulfonyl]-2-propenoic acid methyl ester (6) and 2-[[4-methylphenyl)sulfonyl]methyl]-2-propenoic acid methyl ester (7), formed by the dehydrohalogenation and subsequent isomerization of an intermediate chloro-adduct, 1-(4-methylbenzenesulfonyl)-2-chloro-2-(methyl)methyl propionate (2). Molecular modeling predicted the unsaturated sulfone 7 was thermodynamically more stable than the higher conjugated sulfone 6 and this was confirmed by the isomerization of 6 to 7 at room temperature under mild basic conditions. The absence of 6 and 7 in the polymerization of MMA under ATRP conditions showed that in the early stages of polymerization in the presence of excess MMA, the intermediate chloro-adduct 2 is not formed.     

Synthesis and properties of polyacetylenes having pendent phenylethynylcarbazolyl groups

Novel acetylene monomers substituted with phenylethynylcarbazolyl groups, 3-[(4-octylphenyl)ethynyl]-9-propargylcarbazole (1), 3,6-bis[(4-octylphenyl)ethynyl]-9-propargylcarbazole (2), 9-(4-ethynylphenyl)-3-[(4-octylphenyl)ethynyl]carbazole (3), and 9-(4-ethynylphenyl)-3,6-bis[(4-octylphenyl)ethynyl]carbazole (4) were synthesized, and polymerized with Rh⁺(nbd)[η⁶-C₆H₅B⁻(C₆H₅)₃] and WCl₆-n-Bu₄Sn catalysts. The corresponding polyacetylenes with number-average molecular weights ranging from 9200 to 94?000 were obtained in 20-98% yields. The IR spectra of the polymers revealed that acetylene polymerization took place at the terminal ethynyl group, while the ethynylene group remained intact. The UV-vis absorption band edge wavelengths of W-based poly(3) and poly(4) were longer than those of the other polymers. W-Based poly(4) emitted fluorescence with the highest quantum yield (41%). Poly(1) exhibited excimer-based fluorescence in dilute solution.     

Titanium complexes based on aminodiol ligands for the ring opening polymerization of l- and d,l-lactide

A series of new titanium isopropoxide complexes (1-4-Ti(OⁱPr)₂ based on enantiopure (1-H₂), racemic (2-H₂), meso (3-H₂) and diastereomeric (4-H₂) aminodiol ligands have been prepared and tested as initiators for the ring opening polymerization (ROP) of l/rac-lactide in solution and in bulk conditions. All complexes were shown to have significant activity in solution at 70 °C and higher activity in bulk at 130 °C with a good control over the molar mass distribution and molecular weights. The complex derived from the racemic-aminodiol ligand gave partially heterotactic polylactide in ROP of rac-lactide and afforded atactic polylactide in the bulk, whereas all other complexes yielded atactic polylactides both in solution and in bulk. Ligand variation (chirality) in the complexes has little effect on either the activity or selectivity of the initiators. The polymerization kinetics using (1-Ti(OⁱPr)₂) as an initiator indicated a first order reaction with respect to the monomer concentration.     

Synthesis of novel poly(diphenylacetylene)s with both trimethylsilyl and alkyl groups: The effect of desilylation on gas permeability

Diphenylacetylenes having both a trimethylsilyl group and an alkyl group at para positions [Me₃SiC₆H₄CCC₆H₄R; R = Et (1a), n-Bu (1b), t-Bu (1c), n-C₈H₁₇ (1d)] and having only an alkyl group [PhCCC₆H₄R; R = n-Bu (1B), n-C₈H₁₇ (1D)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2D). The formed polymers except 2c afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of the Si-containing polymer membranes (2a, 2b, 2d) was carried out with trifluoroacetic acid, and the desilylated polymer membranes (3a, 3b, 3d) were obtained. The permeability to O₂, N₂, and CO₂ were determined for the obtained polymer membranes. All the desilylated membranes showed lower gas permeability than the Si-containing counterparts. To clarify the effects of the desilylation further, CO₂ diffusivity, CO₂ solubility, and fractional free volume (FFV) of the polymer membranes were investigated. The FFV and CO₂ diffusivity decreased upon desilylation, while CO₂ solubility hardly varied.     

Metallocene-catalyzed synthesis of polyethylenes with side-chain triarylamines: Effects of catalyst structure and triarylamine functionality

The copolymerization of ethylene with 8-triarylamine (TAA) substituted 1-octene monomers (TAA = triphenylamine (M1), N,N-diphenyl-m-tolylamine (M2), N,N-diphenyl-1-naphthylamine (M3)) using various types of group 4 single-site catalytic systems (Cp₂ZrCl₂ (C1), rac-EBIZrCl₂ (C2), rac-SBIZrCl₂ (C3), i-PrCpFluZrCl₂ (C4), Me₂Si(η⁵-C₅Me₄)(η¹-N-^tBu)TiCl₂ (C5)) was investigated to prepare functionalized polyethylene with side-chain TAA groups. The metallocene/methylaluminoxane (MAO) catalytic systems (C1-C4) efficiently lead to the production of high-molecular-weight poly(ethylene-co-M1). While the C4/MAO catalytic system shows the highest comonomer response, the C5/MAO system exhibits the poor compatibility with the M1 comonomer. Copolymerization results of ethylene with M1-M3 using C4/MAO indicate that M1-M3 are well tolerated by both the cationic active species of C4 and MAO cocatalyst, giving rise to the copolymers with high levels of activity and molecular weight. Inspection of the aliphatic region of the ¹³C NMR spectra of the copolymers (P1-P3) having ca. 11 mol% of M1-M3, respectively, reveals the presence of isolated comonomer units with prevailing [EEMEE] monomer sequences in the polymer chain. UV-vis absorption and PL spectra exhibit an apparent low-energy band broadening for P1 and P2 indicative of intrachain aggregate formation. Whereas P2 and P3 undergo completely reversible one-electron oxidation process, P1 shows relatively poor oxidational stability.     

Synthesis and properties of helical polyacetylenes containing carbazole

Novel acetylene monomers containing carbazole with chiral menthyl and bornyl groups, 9-(1R,2S,5R)-menthyloxycarbonyl-2-ethynylcarbazole (1), 9-(1S,2R,5S)-menthyloxycarbonyl-2-ethynylcarbazole (2), 9-(1R,2S,5R)-menthyloxycarbonyl-3-ethynylcarbazole (3) and 9-(1S)-bornyloxycarbonyl-2-ethynylcarbazole (4) were synthesized and polymerized with a Rh catalyst to give the corresponding polymers [poly(1)-poly(4)] with moderate M_n value of (11.5-92.2) × 10³ in good yields (77-89%). CD spectroscopic studies revealed that poly(1), poly(2) and poly(4) took predominantly one-handed helical structure in CHCl₃, THF, toluene, and CH₂Cl₂, while poly(3) did not. Addition of methanol to CHCl₃ solutions of poly(1) and poly(2) resulted in the formation of aggregates showing smaller CD signals at 275 and 320 nm. The helical structure of poly(1) and poly(2) was very stable against heating. The polymers emitted fluorescence in 0.40-2.90% quantum yields. Poly(4) exhibited an obvious oxidation peak at 1.10 V. The polymers were thermally stable below 300 °C.     

Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

Novel poly(diphenylacetylene)s with both alkyl and silyl groups as gas permeable membranes: Synthesis, desilylation, and gas permeability

Diphenylacetylenes having a dimethyloctylsilyl group and an alkyl group at para positions [Me₂n-C₈H₁₇SiC₆H₄CCC₆H₄R; R = H (1a), i-Pr (1b), t-Bu (1c), n-Bu (1d)] and having only an alkyl group [PhCCC₆H₄R; R = i-Pr (1B), t-Bu (1C)] were synthesized and then polymerized with TaCl₅/n-Bu₄Sn catalyst to provide the corresponding poly(diphenylacetylene)s (2a, 2b, 2c, 2d, 2B, and 2C). The formed polymers afforded tough free-standing membranes by casting from toluene solutions. Desilylation reaction of Si-containing membranes (2a-d) was carried out with trifluoroacetic acid to give the desilylated membranes (3a-d). The permeability of these membranes to O₂, N₂, and CO₂ were determined. All the Si-containing membranes exhibited almost the same gas permeability. The desilylation of Si-containing membranes of 2a-c resulted in large increase of gas permeability. No apparent increasing of gas permeability was observed in the desilylation of 2d. To clarify the effects of desilylation, CO₂ diffusivity (D(CO₂)), CO₂ solubility (S(CO₂)), and fractional free volume (FFV) of the polymer membranes were investigated. The S(CO₂) values of desilylated membranes were much larger than that of Si-containing counterparts. The D(CO₂) and FFV of membranes of 2a-c increased through desilylation. The desilylated membrane of 3d had small D(CO₂) value and almost the same FFV compared with 2d. Further, the comparison of the permeability between three types of membranes with the same chemical structure revealed that the microvoids were not generated by the desilylation of membranes of poly(diphenylacetylene)s containing alkyl groups.     

Preparation and properties of polytolan membranes bearing p-hydroxyl groups

The polymerization of a novel monomer p-(t-butyldimethylsiloxy)tolan (1) with TaCl₅-n-Bu₄Sn provided a high molecular weight polymer (poly(1)), whose M_w reached 4.0×10⁶. The poly(1) membrane was prepared by the casting method, and converted into poly[(p-hydroxy)tolan] (poly(2)) with a mixture of trifluoroacetic acid/water. Whereas poly(1) dissolved in low polarity solvents such as toluene and chloroform, poly(2) was practically insoluble in any solvents, although it partly dissolved in methanol and ethanol. The onset weight loss temperatures of poly(1) and poly(2) in air were 320 and 360 °C, respectively, indicating fair thermal stability among substituted polyacetylenes. The oxygen permeability coefficients (P_O2) of poly(1) was 150 barrers, which is relatively small among polytolan derivatives, while that of poly(2) was 8.0 barrers and smaller owing to the presence of polar hydroxyl groups.     

Syntheses of well-defined poly(siloxane)-b-poly(styrene) and poly(norbornene)-b-poly(styrene) block copolymers using functional alkoxyamines

Functional alkoxyamines, 1-[4-(4-lithiobutoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (2) and 1-[4-(2-vinyloxyethoxy)phenyl]-1-(2,2,6,6-tetramethylpiperidinyl-N-oxyl)ethane (3) were prepared, and well-defined poly(hexamethylcyclotrisiloxane)-b-poly(styrene)[poly(D₃)-b-poly(St)] and poly(norbornene)-b-poly(St) [poly(NBE)-b-poly(St)] were prepared using the alkoxyamines. The first step was preparation of poly(D₃) and poly(NBE) macroinitiators, which were obtained by the ring-opening anionic polymerization of D₃ using 2 as an initiator and the ring-opening metathesis polymerization of NBE using 3 as a chain transfer. The radical polymerization of St by the poly(D₃) and poly(NBE) macroinitiators proceeded in the ‘living’ fashion to give well-defined poly(D₃)-b-poly(St) and poly(NBE)-b-poly(St) block copolymers.     

Paired electrochemical synthesis of new organosulfone derivatives

Electrochemical oxidation of “cathodically generated 4-aminocatechol (2)” has been studied in the presence of 4-toluenesulfinic acid (4a) and benzenesulfinic acid (4b) as nucleophiles in aqueous solutions, using cyclic voltammetry and controlled-potential coulometry. The results indicate that the o-benzoquinone derived from 4-aminocatechol (2) participates in Michael addition reaction with 4a or 4b to form the corresponding new organosulfone derivatives (5a and 5b). In this work we have proposed a mechanism for the electrode process. A Fe(CN)₆³⁻/Fe(CN)₆⁴⁻ redox mediator was used for the anodic oxidation of 4-aminocatechol (2) to the corresponding o-quinone 3. The indirect electrochemical process consists of a multi-step such as (a) cathodic reduction of 4-nitrocatechol (1) to 4-aminocatechol (2), (b) chemical oxidation of 4-aminocatechol (2) to 4-aminoquinone (3) with the resulting Fe(CN)₆³⁻, (c) the chemical reaction of 4-aminoquinone (3) with 4-toluenesulfinic acid (4a) or benzenesulfinic acid (4b), and (d) the anodic regeneration of Fe(CN)₆³⁻. The paired electrochemical synthesis of organosulfone derivatives (5a and 5b) has been successfully performed in an one-pot process at carbon rod electrode as a working and platinum as a counter electrode in an undivided cell.