Synthesis of rapid responsive gels comprising hydrophilic backbone and poly(N-isopropylacrylamide) graft chains by RAFT polymerization and end-linking processes

A thermosensitive poly(N-isopropylacrylamide) (PNIPAM) grafted gel, which comprises hydrophilic backbone and freely mobile PNIPAM graft chains, was synthesized by reversible addition fragmentation chain transfer (RAFT) polymerization and end-linking processes. Functional PNIPAM bearing dithiobenzoate end group (-C(S)S-R) was prepared first, and then it was reacted with divinyl compounds to obtain gel. In order to adjust the composition of the gels, two divinyl compounds, N,N-methylenebisacrylamide (BIS) and poly(ethylene glycol) diacrylate (PEGDAC), were used. The cross-linking polymerization mechanism was proposed. The swelling and deswelling kinetics of the hydrogels were measured. The gels exhibit rapid deswelling kinetics. At the same time, they show rapid swelling kinetics within 30 min, whereas a conventional PNIPAM-co-PEG-co-BIS gel with the same feed composition requires more than 10 h to reach swelling equilibrium.     

Synthesis and thermo-responsive behavior of fluorescent labeled microgel particles based on poly(N-isopropylacrylamide) and its related polymers

Poly(N-isopropylacrylamide) (PNIPAM) microgel particles labeled with 3-(2-propenyl)-9-(4-N,N-dimethylaminophenyl)phenanthrene (VDP) as an intramolecular fluorescent probe were prepared by emulsion polymerization. The thermo-responsive behavior of the VDP-labeled PNIPAM microgel particles dispersed in water was studied by turbidimetric and fluorescence analyses. The transition temperature of the VDP-labeled PNIPAM microgel particles in water determined by turbidimetric analysis was ca. 32.5 °C. The wavelength at the maximum fluorescence intensity of the VDP units linked directly to the microgel particles dramatically blue-shifted around the transition temperature. In addition it gradually blue-shifted even below the transition temperature where there was no change observed in the turbidity. These findings suggest that the gradual shrinking of microgel particles occurs with increasing temperature and the subsequent dramatic shrinking results in the increasing in the turbidity. The transition temperatures of VDP-labeled poly(N-n-propylacrylamide) and poly(N-isopropylmethacrylamide) microgel particles determined by turbidimetric analysis were ca. 23 and ca. 42.5 °C, respectively, and their thermo-responsive behavior was similar to that for the VDP-labeled PNIPAM system. In these three systems the microenvironments around the fluorescent probes above the transition temperatures became more hydrophobic than those below the transition temperature, and the estimated values of microenvionmental polarity around the VDP units on their collapsed states were almost the same.     

Photo cross-linkable poly(N-isopropylacrylamide) copolymers III: micro-fabricated temperature responsive hydrogels

Micro-fabricated temperature responsive poly(N-isopropylacrylamide) (PNIPAAm) hydrogels were produced by photolithographic patterning of photo cross-linkable polymers. These polymers were synthesized by copolymerization of N-isopropylacrylamide (NIPAAm) and 2-(dimethyl maleimido)-N-ethyl-acrylamide (DMIAAm). The patterning process of polymers with 9.2 mol% DMIAAm and film thickness below 5 μm in the dry state was able to depict a lateral resolution of 4 μm with insignificant shape change. In order to increase the adhesion of the swollen hydrogels, and thus, the resolution of a particular pattern, a special adhesion promoter based on a monochlorosilane anchor group and a chromophore head group was synthesized. If a silicon wafer surface was pretreated with the adhesion promoter, the structures were stable and well adhered even at lower cross-linking densities. The hydrogels are suitable as working substances for micro-actuators because of their thermally induced volume changes. The swelling ratio of the pattern at low temperatures increased with a decreased cross-linking density. As expected from the chemical composition of the gels, the phase transition temperature (T_c) decreased with increasing DMIAAm content. The swelling of microstructures in water in comparison to macroscopic objects occured significantly faster. This behavior was attributed to the small gel dimension but it was even more pronounced because of the sponge-like nanostructure of the hydrogels characterized by high-resolution field emission scanning electron microscopy. Suitable applications of these hydrogels are adjusting limbs in fluid micro-systems such as micro-pumps and micro-valves.     

Poly(ethylene oxide)-grafted poly(N-isopropylacrylamide) networks: Preparation, characterization and rapid deswelling and reswelling behavior of hydrogels

Poly(ethylene oxide)-grafted poly(N-isopropylacrylamide) networks (PNIPAAm-g-PEO) were prepared via the reversible addition-fragmentation chain transfer polymerization (RAFT) of N-isopropylacrylamide with trithiocarbonate-terminated poly(ethylene oxide) and N,N′-methylenebisacrylamide as the chain transfer agent and the crosslinking agent, respectively. It was found that the PNIPAAm-g-PEO copolymer networks were microphase-separated and that PEO microdomains were dispersed in the PNIPAAm matrix. The hydrogel behavior of the PNIPAAm-g-PEO networks was investigated using swelling, deswelling and reswelling tests. The PNIPAAm-g-PEO hydrogels displayed faster responses to external temperature changes than did the control PNIPAAm hydrogel.     

Synthesis and characterization of thermoresponsive N-isopropylacrylamide/methacrylated pullulan hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization starting from a methacrylated pullulan derivative (acting as the cross-linker) and using N-isopropylacrylamide (NIPAAM) as the monomer. Several hydrogels were obtained by changing the monomer to cross-linker ratio. A significant thermosensitivity was observed only when the molar amount of NIPAAM incorporated in the network was at least eight times higher that of methacrylate groups on pullulan. The hydrogel with high amount of NIPAAM deswells more than 80% after the T-jump. The lower critical solution temperature of thermosensitive hydrogels decreases with increasing amount of NIPAAM. The mechanical properties of the hydrogels are strongly affected by the percentage of incorporated NIPAAM and by the temperature.     

Synthesis and thermally responsive characteristics of dendritic poly(ether-amide) grafting with PNIPAAm and PEG

A series of thermally responsive dendritic core-shell polymers were prepared based upon dendritic poly(ether-amide) (DPEA), modified with carboxyl end-capped linear poly(N-isopropylacrylamide) (PNIPAAm-COOH) or both PNIPAAm-COOH and carboxyl end-capped methoxy polyethylene glycol (PEG-COOH) in different ratios via an esterification process to obtain DPEA-PNIPAAm or DPEA-PNIPAAm-PEG. Their molecular structures were verified by gel permeation chromatography, and ¹H NMR and FTIR spectroscopy. The temperature-dependent characteristics study has revealed that DPEA-PNIPAAm exhibits a lower critical solution temperature (LCST) of about 34 °C, whereas DPEA-PNIPAAm-PEG polymers with the PNIPAAm/PEG ratio of about 1.0 and 0.4 possess about 36 °C and 39 °C, respectively, compared with 32 °C for homopolymer PNIPAAm. The critical aggregation temperature was investigated using fluorescence excitation spectrum of pyrene as a sequestered guest molecule based upon the sharp increase of the I₃₃₈/I₃₃₃ value.     

Preparation and evaluation of thermo-reversible copolymer hydrogels containing chitosan and hyaluronic acid as injectable cell carriers

Poly(N-isopropylacrylamide) end-capped with a carboxyl group (PNIPAM-COOH) was grafted to chitosan for synthesizing thermo-reversible chitosan-g-poly(N-isopropylacrylamide) (CPN), which was further grafted with hyaluronic acid (HA) to form hyaluronic acid-g-CPN (HA-CPN). PNIPAM-COOH, CPN and HA-CPN formed injectable free-flowing aqueous solutions and exhibited reversible sol-to-gel phase transition (above 5% polymer concentration) at 30 °C. Chemical properties and temperature-dependent physical properties of the polymer hydrogels, such as rheological behavior, phase transition kinetics, and water content were characterized in detail. The mechanical stiffness of hydrogels increased with the presence of chitosan in the copolymer, but decreased after conjugation with HA. Chitosan and HA grafting also endowed higher water content and resistance to volume contraction during phase change of the copolymer solution. In vitro cell culture experiments with chondrocytes and meniscus cells in HA-CPN hydrogel showed beneficial effects on the cell phenotypic morphology, proliferation, and differentiation. Progressive tissue formation was demonstrated by monotonic increases in extracellular matrix contents and mechanical properties.     

High clay content nanocomposite hydrogels with surprising mechanical strength and interesting deswelling kinetics

A series of high hectorite content nanocomposite Poly (N-isopropylacrylamide), (PNIPAAm), hydrogels have been successfully synthesized by choosing a special kind of hectorite (Laponite XLS) modified by tetrasodium pyrophosphate. It was found that these hydrogels show surprising mechanical properties (i.e. tensile strength: 1 MPa, elongation at break: 1400%) and complicated deswelling behavior, which are due to the high clay content of the hydrogels and ionic dispersant contained in Laponite XLS, respectively.     

Synthesis and properties of thermosensitive, crown ether incorporated poly(N-isopropylacrylamide) hydrogel

A crown ether derivative (4′-allyldibenzo-18-crown-6, CE) was covalently incorporated into the network of temperature sensitive poly(N-isopropylacrylamide) (PNIPA) hydrogels by copolymerization in a mixed solvent of water and tetrahydrofuran (H₂O/THF). The poly(N-isopropylacrylamide-co-4′-allyldibenzo-18-crown-6) (poly(NIPA-co-CE)) hydrogels exhibited dramatically faster deswelling rates than normal PNIPA hydrogels at a temperature (50 °C) above their lower critical solution temperatures. The effect of the solvent component ratio in the mixed solvent during the copolymerization on the swelling properties of the poly(NIPA-co-CE) hydrogel was investigated. The thermosensitive poly(NIPA-co-CE) hydrogels have potential applications in the extraction of cations and separation of chiral drugs.     

Effect of the cross-linking degree on the morphology of poly(NIPAAm-co-AAc) hydrogels

Hydrogels of poly(N-isopropylacrylamide) co-polymerized with acrylic acid [P(NIPAAm-co-AAc)] were synthesized with cross-linking degrees of 2-7% using (N,N′-methylenebisacrylamide). SEM micrographs revealed that the morphology of dry hydrogels changes from interconnected spherical pores to channel-like pores, with the change in the cross-linking degrees from 3 to 5%. The change in morphology is associated with a significant change in the swelling ratio. It was found that the diffusion rates and permeabilities of methylene blue (MB) through the hydrogel with channel-like pores are significantly higher if the main axes of the pores are oriented parallel to the flow of MB molecules, than if it is oriented perpendicularly. These results show that different morphologies can be obtained by controlling the cross-linking degree of P(NIPAAm-co-AAc) hydrogels in a narrow range around 5% and by performing the polymerization reaction in moulds placed in horizontal and vertical positions, opening a new perspective for modulating their properties in applications as matrices for controlled release of drugs or as membranes for separation processes.     

Effect of hydrophobic polystyrene microphases on temperature-responsive behavior of poly(N-isopropylacrylamide) hydrogels

Reversible addition-fragmentation chain transfer polymerization was employed to prepare the crosslinked poly(N-isopropylacrylamide)-graft-polystyrene networks (PNIPAAm-g-PS). Due to the immiscibility of PNIPAAm with PS, the crosslinked PNIPAAm-g-PS copolymers displayed the microphase-separated morphology. While the PNIPAAm-g-PS copolymer networks were subjected to the swelling experiments, it is found that the PS block-containing PNIPAAm hydrogels significantly exhibited faster response to the external temperature changes according to swelling, deswelling, and reswelling experiments than the conventional PNIPAAm hydrogels. The improved thermo-responsive properties of hydrogels have been interpreted on the basis of the formation of the specific microphase-separated morphology in the hydrogels, i.e., the PS blocks pendent from the crosslinked PNIPAAm networks were self-assembled into the highly hydrophobic nanodomains, which behave as the microporogens and thus promote the contact of PNIPAAm chains and water. The self-organized morphology in the hydrogels was further confirmed by photon correlation spectroscopy (PCS). The PCS shows that the linear model block copolymers of PNIPAAm-g-PS networks were self-organized into micelle structures, i.e., the PS domains constitute the hydrophobic nanodomains in PNIPAAm-g-PS networks.     

Real-time observation of coil-to-globule transition in thermosensitive poly(N-isopropylacrylamide) brushes by quartz crystal microbalance

Thermosensitive poly(N-isopropylacrylamide) (PNIPAm) brushes grafted on SiO₂-coated quartz crystal surface were prepared by the surface initiated radical polymerization. Using X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), about 50 nm thickness of PNIPAm brushes were successfully formed. Quartz crystal microbalance with dissipation (QCM-D) is employed to investigate the collapse and swelling behavior of the PNIPAm brushes in water in real time. Both frequency and dissipation of PNIPAm layer were found to change gradually over the temperature range 15-50 °C, indicating that the brushes undergo a continuous transition. This continuous change is attributed to the nonuniformity and stretching of PNIPAm brushes as well as the cooperativity between collapse and dehydration transition.     

Preparation and structure characterization of hairy nanoparticles consisting of hydrophobic core and thermosensitive hairs

Structural characterization of hairy nanoparticles consisting of poly(styrene-co-glycidyl methacrylate) (St/GMA) core and poly(NIPA-co-vinylimidazole) (NIPA/VIm) hair has been carried out by dynamic light scattering. The hairy molecules were introduced by surface graft-polymerization of a mixture of NIPA and VIm monomers to the St/GMA core particles with the hydrodynamic radius R_H of 135±10 nm. The R_H of St/GMA-core-NIPA/VIm-hair particles was R_H=360±20 nm at 20 °C, which gradually decreased to 285±10 nm by heating to 33.0 °C, and then underwent a sharp decrease to 175±10 nm by further heating to 33.8 °C. The final value went to 159±10 nm at 36 °C. This decrease in R_H is due to the shrinking transition of NIPA/VIm chain by hydrophobic association. The degree of shrinking of the hairy particles is compared with that of bulk NIPA gels from the viewpoint of geometrical constraints.     

Contributions to the thermodynamics of polymer hydrogel systems

In this work, an extended version of a quasichemical thermodynamic model is presented. The swelling behavior of crosslinked acrylamide polymer gels and N-substituted derivatives, such as N-isopropylacrylamide and N-tert-butylacrylamide has been compared to predictions from such model which takes into account the specific hydrogen bonding interactions encountered in these systems. The calculated volume transition temperature of the poly(N-isopropylacrylamide) gel is 0.8 °C lower than the experimental value and the predicted solvent volume fraction in the collapsed and swollen gel states are about 2% larger than the corresponding experimental data measured at the transition point. Applying the same energy parameters obtained from regressing poly(N-isopropylacrylamide) gel swelling pressure data, the model has also been capable to correctly represent the major features found in the swelling behavior of linear poly(N-tert-butylacrylamide) and poly(N-tert-butylacrylamide) gels, after the model parameters that characterize the molecular structure were changed in accord to each polymer repetitive unit.     

Thermoreversible swelling behaviour of hydrogels based on N-isopropylacrylamide with a hydrophobic comonomer

Hydrogels were prepared by free radical polymerisation in aqueous solution of N-isopropylacrylamide (NIPA) and of NIPA with di-n-propylacrylamide (DPAM), di-n-octylacrylamide (DOAM) or di-dodecylacrylamide (DDAM) as hydrophobic comonomer. N,N-methylene bisacrylamide (BIS) and glyoxal bis(diallyacetal) (GLY) were used as crosslinkers. A series of copolymers with three different comonomer contents was synthesised and for some polymers three different crosslinker concentrations were employed. The swelling equilibrium of these hydrogels was studied as a function of temperature, hydrophobic comonomer species and content in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS). In pure water the gels showed a discontinuous volume phase transition at 33 and 30 °C for PNIPA and hydrophobically modified PNIPA copolymeric hydrogels, respectively. The swelling ratio r and the transition temperature (LCST) increased at low temperatures with the addition of SDS, this is ascribed to the conversion of non-ionic PNIPA gels into polyelectrolyte gels through the binding of SDS. At SDS concentration below 0.5 wt%, gels exhibited a single discontinuous volume transition at 36-38 °C. However, for SDS concentration above 0.5 wt%, two discontinuous volume transitions at 36-40 and 70 °C were observed. Additionally, the replacement of BIS by the novel octafunctional crosslinker glyoxal bis(diallylacetal) (GLY) yielded an increase in the swelling ratio.     

Thermally responsive poly(N-isopropylacrylamide) monolayer on gold: synthesis, surface characterization, and protein interaction/adsorption studies

This report describes a novel method for preparing a thermally responsive poly(N-isopropylacrylamide) (PNiPAM) monolayer on a gold surface, and demonstrates the function of this monolayer in aqueous media. Thiol (-SH) terminated PNiPAM was synthesized by UV polymerization followed by hydrolysis, and a monolayer of this polymer (2.84±0.2 nm) was prepared on a gold substrate by simply dipping a precleaned gold plate into an aqueous solution of the PNiPAM. Cyclic voltametry and atomic force microscopy studies showed that the gold surface was well covered by the PNiPAM chains, and X-ray photoelectron spectroscopic data showed that this monolayer was chemisorbed on the gold surface. Studies of the water contact angle, protein interaction, and protein adsorption on the PNiPAM monolayer demonstrated that this monolayer shows a temperature dependence of the interfacial properties in aqueous media.     

Synthesis and characterization of pH-sensitivity semi-IPN hydrogel based on hydrogen bond between poly(N-vinylpyrrolidone) and poly(acrylic acid)

A novel spherically shaped semi-interpenetrating network (semi-IPN) hydrogel, which is based on hydrogen bond between chemical crosslinked poly(N-vinylpyrrolidone) (PVP) and linear poly(acrylic acid) (PAA), was prepared. The semi-IPN hydrogel was synthesized by three steps: (1) linear PAA with different molecular weights were obtained by a reaction of free radical polymerization used 2,2′-azo-bis-iso-butyronitrile (AIBN) as an initiator; (2) crosslinked PVP bead was obtained by a reaction of N-vinylpyrrolidone with AIBN used as an initiator and N,N′-methylene-bis-acrylamide (NNMBA) used as a crosslinker by the way of suspension polymerization; (3) complexation occurred between suitable amount of aqueous solution of PAA and the porous PVP bead and was stabilized by multiple frost-defrost, from this step the semi-IPN hydrogel was obtained. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) proved the presence of the hydrogen bond in the hydrogel. The swelling behaviour of the hydrogel was studied in buffer solution with different pH and NaCl aqueous solution. The results showed that the semi-IPN hydrogel had excellent pH-sensitivity in the range of pH from 2.25 to 4.00 and the small molecule salt had little influence on the swelling behaviour of the semi-IPN hydrogel over the range of concentration of NaCl aqueous solution investigated. The results were confirmed further by scanning electron microscope (SEM). The mechanism of swelling and deswelling was discussed.     

Dynamic mechanical and tensile properties of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) blends

Mechanical properties of miscible blends of high molecular weight poly(N-vinyl pyrrolidone) (PVP) with a short-chain, liquid poly(ethylene glycol) (PEG) of molecular weight 400 g/mol have been examined as a function of PVP-PEG composition and degree of hydration. The small-strain behavior in the linear elastic region has been evaluated with the dynamic mechanical analysis and compared with the viscoelastic behavior of PVP-PEG blends under large strains in the course of uniaxial drawing to fracture and under cyclic extension. A strong decoupling between the small-strain and the large strain properties of the blends has been observed, indicative of a pronounced deviation from rubber elasticity in the behavior of the blends. This deviation, also seen on tensile tests under fast drawing, is attributed to the peculiar phase behavior of the blends and the molecular mechanism of PVP-PEG interaction. Nevertheless, for the PVP blend with 36% PEG, under comparatively low extension rates, the reversible contribution to the total work of deformation up to ε=300% has been found to be maximum at around 70%, while the blends containing 31 and 41% PEG behave rather as an elastic-plastic solid and a viscoelastic liquid, respectively.     

Novel triblock copolymers synthesized via radical telomerization of N-isopropylacrylamide in the presence of polypseudorotaxanes made from thiolated PEG and α-CDs

A protocol for the preparation of novel triblock copolymers comprising a polyrotaxane center block and outer blocks of poly(N-isopropylacrylamide) (PNIPAAm) as bulky stoppers was developed, in which N-isopropylacrylamide was allowed to telomerize in the presence of polypseudorotaxanes made from the self-assembly of thiol end-capped PEG with a varying amount of α-CDs under UV irradiation in aqueous solution. The molecular structure of the resulting copolymers was characterized in detail by ¹H NMR, FTIR, XRD, TG and DSC analyses. It was demonstrated that the PNIPAAm blocks are successfully attached to the two terminals of the polypseudorotaxanes and each block having the minimum 7 NIPAAm units seems long and bulky enough to efficiently impede the dethreading of α-CDs from the PEG axle to give rise to the triblock polyrotaxane-containing copolymers.