Synthesis of phase- and shape-controlled TiO2 nanoparticles via hydrothermal process

The TiO₂ nanoparticles with anatase (5.7–12.7 nm), rutile (5.4–8.8 nm), mixed (4.4–8.6 nm) phase were individually prepared using the hydrothermal method. The structure and shape of the particles could be controlled by careful alterations of the hydrothermal conditions. Herein, the TiO₂ nanoparticles were successfully synthesized by employing Ti-isopropoxide as the titanium source into hydrochloric acid solution at mild conditions. The crystal structures such as anatase, rutile and mixed phase of TiO₂ nanoparticles were determined by means of concentration of hydrochloride. Especially, we observed that the rutile TiO₂ crystallites were grown into one-dimensional nanostructures, especially, nanowires, with increasing reaction time. The mechanism of the crystallization of the nanoparticles and the growth habit of TiO₂-rutile structure were discussed.     

Slurry explosive detonation synthesis and characterization of 10 nm TiO2

TiO₂ was prepared by detonating a slurry explosive made of Ti precursor, ammonium nitrate, cyclotrimethylenetrinitramine (RDX), and polystyrene (EPS). X-ray diffraction, transmission electron microscopy, energy dispersive X-ray spectrometry, Fourier transform infrared spectroscopy, and UV–vis diffuse reflection spectroscopy revealed that the sample was composed of mixed crystals of rutile and anatase TiO₂ with irregular spherical shapes and 10 nm particle size. The minimum energy gap of the sample was 2.9 eV. An ideal TiO₂ explosive was prepared from a precursor/ammonium nitrate/RDX ratio of 1:1:0.6 and 2 g of EPS as a density modifier.     

Rapid synthesis of ZnO nanostructures through microwave heating process

In this paper, polycrystalline zinc oxide (ZnO) nanostructures have been prepared by a hydrothermal synthesis through rapid microwave heating (180 s). The structure, composition and optical properties of the products were examined by scanning electron microscopy (SEM), energy dispersive x-ray spectrum (EDS), ultraviolet–visible spectroscopy (UV–vis), x-ray diffraction (XRD), photoluminescence spectroscopy (PL) and Raman spectroscopy. Typically, the synthesized nanostructures were zinc-rich with diameter ranging from 20 nm to 200 nm in length. From the Raman spectroscopy and PL measurements, it was found that the as-deposited films contain vacancy defects that originated from the rapid synthesis process.     

Physical properties of V-doped TiO2 nanoparticles synthesized by sonochemical-assisted process

V-doped TiO₂ nanoparticles were synthesized by sonochemical process using titanium isopropoxide as a titanium source, vanadyl acetylacetonate as a dopant source. Sonication was conducted using sonic horn operated at 20 kHz for 20 min until the completely precipitated product was reached. The as-synthesized precipitates with various vanadium dopant (1–5 mol %) were calcined at 500–1000 °C for 4 h. The relevant physical properties of the nanoparticles were characterized by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and transmission electron microscope (TEM). The anatase phase TiO₂ nanoparticles can be synthesized by sonochemical process. Post calcinations process results in the anatase-to-rutile phase transformation and the enhancement in crystallinity with increasing temperature. The results also indicate good incorporation of V ions in TiO₂ lattices and significant effect of V dopant on alternation of interplanar spacing of TiO₂.     

The photo-catalytic activities of neodymium and fluorine doped TiO2 nanoparticles

A series of photo-catalysts were synthesized by neodymium and fluorine doped TiO₂, and their characteristics evaluated by X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (UV–vis), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Neodymium and fluorine doped TiO₂ has obvious absorption in the visible light and the absorption edge shifts toward red wavelength. In addition, compared with pure TiO₂, the doped catalyst has intense absorption at 528, 587, 750, 808, and 881 nm. The catalytic efficiency was tested by monitoring the photo-catalytic degradation of methylene blue (MB) in visible light and ultraviolet light. The results showed that the optimum doping content was Nd:F:TiO₂ = 0.5:5:100 (molar ratio) heat treated at 500 °C, and the reaction rates of MB degradation were estimated to be about 1.76 times and 1.45 times higher than undoped TiO₂ in ultraviolet light and visible light.     

A comparative study of the effect of Pd-doping on the structural,optical, and photocatalytic properties of sol–gel derived anatase TiO2 nanoparticles

Pd-doped anatase TiO₂ nanoparticles were synthesized by a modified sol–gel deposition technique. The synthetic strategy is applicable to other transition and post-transition metals to obtain phase-pure anatase titania nanoparticles. This is important in the sense that anatase titania forms the most hydroxyl radicals (compared to other polymorphs like rutile, brookite, etc.) for better photocatalytic performance. XRD and Raman data confirm the phase-pure anatase formation. Doping of Pd²⁺ into Ti⁴⁺ sites (for substitutional doping) or interstitial sites (for interstitial doping) creates strain within the nanoparticles and is reflected in the XRD peak broadening and Raman peak shifts. This is because of the ionic radii difference between Ti⁴⁺(∼68 pm) and Pd²⁺(∼86 pm). XPS data confirm the formation of high surface titanol groups at the nanoparticle surface and a large number of loosely bound Ti³⁺–O bonds, both of which considerably enhance the photocatalytic activity of the doped nanoparticles. A comparative study with other metal doping (Ga) shows that TiO₂: Pd nanoparticles have more Ti³⁺–O bonds, which enhance the charge transfer rate and hence improve the photocatalytic activity compared to other transition and post-transition metal-doped titania nanostructures.     

Supercritical hydrothermal synthesis of titanium dioxide nanostructures with controlled phase and morphology

A novel template- and organic-free synthesis of TiO₂ nanostructures with controlled phase and morphology was realized through batch supercritical hydrothermal treatment (400 °C) of titanate nanotubes (TNTs) with H₂O₂ in NaOH aqueous solution. Well-defined 3D titanate hierarchical spheres (THSs), 2D multilayered titanate nanosheets (TNSs), and 1D monodisperse anatase nanorods (ANRs) exposing (0 1 0) facets were prepared in 15 min by slightly varying the NaOH solution pH. Specifically, the obtained Na/H-THSs (without/with HCl neutralization) exhibited highly porous structures with large specific surface area (109 m² g⁻¹ and 196 m² g⁻¹, respectively). Temperature-dependent phase and morphology evolutions of products under subcritical condition (200 and 300 °C) were investigated. The formation of the TiO₂ nanostructures from TNTs was proposed mainly following a dissolution–nucleation-growth mechanism, suggesting that both supercritical temperature and NaOH solution pH were determinant factors governing the nucleation and growth process and thus the phase and morphology.     

Hydrothermal synthesis of titanate nanostructures with high UV absorption characteristics

The titanate nanostructures with high UV absorption characteristics could be fabricated by hydrothermal method within a temperature range of 90–150 °C. TEM, XRD, BET analyses, and UV–vis spectroscopy were employed to elucidate the synthesized titanate nanostructure characteristics which were microstructure, phase transformation, specific surface area, and band gap energy, respectively. With an increase in the hydrothermal treating temperature from 90 to 120 °C, the specific surface area of titanate nanostructures was increased from 83 to 258 m²/g, while the band gap energy of titanate nanostructures was increased from 3.44 to 3.84 eV and then slightly decreased to 3.81 eV at 150 °C. The fabricated titanate nanostructures could exhibit higher UV adsorption capability but lower photocatalytic activity when compared with that of commercial TiO₂ powders.     

Hydrothermal synthesis of 3D TiO2 nanostructures using nitric acid: Characterization and evolution mechanism

Various morphologies of TiO₂ nanostructures were synthesized by HNO₃ assisted hydrothermal treatment with respect to the acid molarity (1 M, 3 M, and 8 M), temperature (110, 140, and 180 °C), and time (1, 3, and 6 h). An additional sample was synthesized inside the protonated titanate nanoribbon coated vessel with the acid molarity of 8M at 140 °C for 3 h. The crystal structure and morphology of the nanostructures synthesized were investigated using X-Ray diffractometer, scanning electron microscope, and transmission electron microscope. The results revealed that lower acid concentrations, longer synthesis durations and higher temperatures favored anatase phase formation. Meanwhile, a phase pure 3D lotus structure rutile TiO₂ could be obtained by hydrothermal synthesis at 8M HNO₃ concentration at 140 °C for 3 h using protonated H-titanate nanoribbons. A probable mechanism for the evolution of 3D rutile lotus structure was highlighted.     

Structural,photocatalytic, biological and catalytic properties of SnO2/TiO2 nanoparticles

TiO₂ and SnO₂/TiO₂ nanoparticles with different SnO₂ contents (0–20 wt%) were synthesized via surfactant-assisted sol-gel method using a cationic surfactant (cetyltrimethylammonium bromide, CTAB). The effects of SnO₂ content on the structural, optical, and catalytic activity of TiO₂ have been studied by X-ray diffraction (XRD), Transmission electron microscope (TEM), Scanning electron microscope (SEM), Fourier transformer infrared (FTIR) and UV–vis diffuse reflection spectroscopy (DRS). The total surface acidity of the prepared samples was measured by nonaqueous titration of n-butylamine in acetonitrile and the types of Brönsted and Lewis acid sites were distinguish using FTIR spectra of chemisorbed pyridine. XRD patterns analysis indicates that the crystallite size reduced remarkably and the transformation of anatase-to-rutile phase accelerated greatly with increasing the SnO₂ content. TEM images exhibit a spherical shape with an average particle size varying in the range 10–24 nm and high-resolution TEM images (HRTEM) show lattice fringes with interplanar spacing 0.35 nm and 0.32 nm which corresponding to anatase and rutile phases, respectively. SEM images show the amount of SnO₂ on the TiO₂ surface increases with increasing the SnO₂ content and the particles of SnO₂ were aggregated on TiO₂ surface with increasing SnO₂ content to 20% wt. The catalytic activity was tested by various applications: Photodegradation of Methylene Blue (MB) and Rhodamine B (RhB) under UV–vis irradiations and synthesis of xanthene (14-phenyl-14H-dibenzo [a,j] xanthene). Antibacterial and antioxidant activities were also studied. The antibacterial property test was carried out via agar disc diffusion method, and the results indicated that the prepared catalysts showed moderate antibacterial activity.     

Decomposition of nonionic surfactant on a nitrogen-doped photocatalyst under visible-light irradiation

A visible-light-active N-containing TiO₂ photocatalysts were prepared from crude amorphous titanium dioxide by heating amorphous TiO₂ in gaseous NH₃ atmosphere. The calcination temperatures ranged from 200 to 1000 °C, respectively. UV–vis/DR spectra indicated that the N-doped catalysts prepared at temperatures <400 °C absorbed only UV light (E_g = 3.3 eV), whereas samples prepared at temperatures ≥400 °C absorbed both, UV (E_g = 3.10–3.31 eV) and vis (E_g = 2.54–2.66 eV) light. The chemical structure of the modified photocatalysts was investigated using FT-IR/DRS spectroscopy. All the spectra exhibited bands indicating nitrogen presence in the catalysts structure. The photocatalytic activity of the investigated catalysts was determined on a basis of a decomposition rate of nonionic surfactant (polyoxyethylenenonylphenol ether, Rokafenol N9). The most photoactive catalysts were those calcinated at 300, 500 and 600 °C. For the catalysts heated at temperatures of 500 and 600 °C Rokafenol N9 removal was equal to 61 and 60%, whereas TOC removal amounted to 40 and 35%, respectively. In case of the catalyst calcinated at 300 °C surfactant was degraded by 54% and TOC was removed by 35%. The phase composition of the most active photocatalysts was as follows: (a) catalyst calcinated at 300 °C—49.1% of amorphous TiO₂, 47.4% of anatase and 3.5% of rutile; (b) catalyst calcinated at 500 °C—7.1% of amorphous TiO₂, 89.4% of anatase and 3.5% of rutile; (c) catalyst calcinated at 600 °C—94.2% of anatase and 5.8% of rutile.     

Template-assisted hydrothermal synthesis and photocatalytic activity of novel TiO2 hollow nanostructures

TiO₂ hollow nanostructures were successfully synthesized by a controlled hydrothermal precipitation reaction using Resorcinol–Formaldehyde resin spheres as templates in aqueous solution, and then removal of the RF resins spheres by calcination in air at 450 °C for 4 h. The obtained TiO₂ hollow spheres were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption analysis, and UV–visible diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic decolorization of rhodamine B aqueous solution at ambient temperature under UV illumination. The results indicated TiO₂ hollow nanostructures exhibit the excellent photocatalytic activity probably due to the unique hollow micro-architectures.     

Synthesis and characterisation of thin-film TiO2 dye-sensitised solar cell

A TiO₂ dye-sensitised solar cell (DSSC) is fabricated and characterised using: X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), electron diffraction X-ray (EDX) analysis, UV–vis spectrometry and a current?voltage (I?V) test. Thicker anatase TiO₂ gives rise to better crystallinity and subsequently leads to better cell efficiency. Mesoporous TiO₂ with a suitable, average pore size results in higher conversion efficiency. Smaller particle sizes lead to higher dye uptake and increase short circuit current density, J_sc. Addition of scattering layer and/or dual TiCl₄ treatment for DSSCs having optimum thickness enhanced their performance. A DSSC having double TiO₂ layers (20 nm+50 nm) with dual TiCl₄ treatment achieved the highest conversion efficiency of 9.78%.     

TiO2 nanofibers doped with rare earth elements and their photocatalytic activity

In the present study rare earth doped (Ln³⁺–TiO₂, Ln = La, Ce and Nd) TiO₂ nanofibers were prepared by the sol–gel electrospinning method and characterized by XRD, SEM, EDX, TEM, and UV-DRS. The photocatalytic activity of the samples was evaluated by Rhodamine 6G (R6G) dye degradation under UV light irradiation. XRD analysis showed that all the synthesized pure and doped titania nanofibers contain pure anatase phase at 500 °C but at 700 °C it shows both anatase and rutile phase. XRD result also shows that Ln³⁺-doped titania probably inhibits the phase transformation. The diameter of nanofibers for all samples ranges from 200 to 700 nm. It was also observed that the presence of rare-earth oxides in the host TiO₂ could decrease the band gap and accelerate the separation of photogenerated electron–hole pairs, which eventually led to higher photocatalytic activity. To sum up, our study demonstrates that Ln³⁺-doped TiO₂ samples exhibit higher photocatalytic activity than pure TiO₂ whereas Nd³⁺-doped TiO₂ catalyst showed the highest photocatalytic activity among the rare earth doped samples.     

Nitrogen-doped anatase titania nanorods with reactive {101} + {010} facets exposure produced from ultrathin titania nanosheets for high photocatalytic performance

To obtain high performance catalysts for the photooxidation of organic pollutants in water, nitrogen-doped TiO₂ nanorods with {101} + {010} facets exposure were successfully synthesized by using ultrathin two-dimensional titania nanosheets as precursor. The nitrogen-doped one-dimensional nanorods had a uniform size within 100 nm. The crystal structure of nitrogen-doped TiO₂ nanorods (anatase) didn't alter even though subjected from morphology transformation, however, their crystallinity improved tremendously, and the exposure and proportion of active facets changed, which synergistically boosted the catalytic efficiency. This integrated technology including modification, morphology and phase control might be indicative for fabrication of advanced photocatalysts to remedy environmental pollutant and produce clean energy in the future.     

TiO2 nanopowders via radio-frequency thermal plasma oxidation of organic liquid precursors: Synthesis and characterization

TiO₂ nanopowders have been synthesized via Ar/O₂ thermal plasma oxidation of titanium butoxide (TBO) solutions stabilized with diethanolamine (DEA). Experiments were conducted by varying the O₂ input in the plasma sheath (10–90 L/min) and the DEA/TBO molar ratio (R), while keeping the plasma generation power at 25 kW and the reactor pressure at 500 Torr. The resultant powders are mixtures of the anatase and rutile polymorphs in the studied range, whose anatase content and crystallite size exhibit weak dependence on the O₂ input at a fixed R. Increasing R decreases the anatase content, signifying the role of CO gas, generated via oxidation of the organic precursor, on the phase structure. FE-SEM and TEM analysis show that the resultant powders contain majority of nanoparticles (<50 nm) and some large spheres (>100 nm), whose size and/or number tends to decrease at a higher O₂ input, leading to gradually increased specific surface area. Raman spectroscopy reveals no significant differences in the crystallite size and oxygen-vacancy concentration of the nanocrystals by varying the O₂ input.     

One-step solution synthesis and formation mechanism of flower-like ZnO and its structural and optical characterization

The regular hierarchical flower-like ZnO nanostructures assembled by nanosheets were successfully synthesized by one-step solution route with citrate assistance at room temperature. It was demonstrated that the concentration of citrate and the molar ratio of Zn²⁺/OH⁻ had strong effect on the formation of nanosheets and self-assembly flower-like nanostructures. A reasonable formation mechanism of the flower-like nanostructures was proposed. According to UV–vis spectrum, the flower-like ZnO nanostructures exhibited strong light absorption, and the value of band gap of the obtained ZnO was estimated to be 3.26 eV. Moreover, the room-temperature photoluminescence (PL) spectrum of the sample presented only a near-band edge emission at 382 nm.     

Formation of anatase TiO2 nanoparticles by simple polymer gel technique and their properties

Pure anatase nano-TiO₂ powders were successfully prepared by a simple polymer gel technique using poly-(vinylpyrrolidone) (PVP) as the polymer. The products were systematically characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), UV–visible spectroscopy and photoluminescence studies. The XRD and XPS results indicate that the prepared powder had a pure anatase nano-TiO₂ structure with lattice parameters a and c of 0.378 and 0.951 nm, respectively. The particle size analysed by TEM ranged between 7 and 12 nm. The maximum UV absorption for the TiO₂ nanoparticles was below 400 nm with an estimated direct band gap (Eg) of 3.55 eV. The photoluminescence peaks of the nanopowder were observed at 391 and 468 nm. The nanosized materials were produced using a simple and cost effective polymer gel technique.     

Ir promotion of TiO2 supported Au catalysts for selective hydrogenation of cinnamaldehyde

We synthesized Ir-on-Au (Au–Ir) nanoparticles (NPs) using 8–9 nm Au NPs, which had a partial coverage of Ir. Both the studied systems allowed the obtainment of cinnamyl alcohol with high selectivities (> 83%). However, Au–Ir/TiO₂ delivered a hydrogenation rate 5 times higher than that of Au/TiO₂. The deposition of Ir onto the surface of Au and the presence of surface Au–Ir alloy were confirmed by UV–vis and HRTEM respectively. Moreover. Moreover, the strongly shifted XPS binding energy implyed the electron transfer from Ir to Au, which was believed to be responsible for the enhanced H₂ activation capacity of Au.     

Synthesis of CuInS2 quantum dots on TiO2 porous films by solvothermal method for absorption layer of solar cells

Copper indium disulfide (CuInS₂) nano-particles have been synthesized by solvothermal method for absorption layer of solar cells. The CuInS₂ nano-particles can be adsorbed in pores of TiO₂ porous films. The effects of heat-treatment on crystalline structures and sizes of the CuInS₂ nano-particles were investigated. Crystalline structures and sizes were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) investigations. Surface morphologies and optical properties were studied by field-emission scanning electron microscope (FESEM) and UV–vis spectra when CuInS₂ were absorbed on TiO₂ films.The results show that the CuInS₂ quantum dots (size is smaller than 10 nm) can be synthesized by solvothermal method at 150 °C. CuInS₂ particles sizes increase with the rise of reaction temperature and time. The CuInS₂ quantum dots can be adsorbed on TiO₂ films well and high-absorptive anodic electrode of solar cells can be prepared. Blue shift of absorption edge was observed as the sizes of CuInS₂ quantum dots decreased.