Synthesis of phase- and shape-controlled TiO2 nanoparticles via hydrothermal process

The TiO₂ nanoparticles with anatase (5.7–12.7 nm), rutile (5.4–8.8 nm), mixed (4.4–8.6 nm) phase were individually prepared using the hydrothermal method. The structure and shape of the particles could be controlled by careful alterations of the hydrothermal conditions. Herein, the TiO₂ nanoparticles were successfully synthesized by employing Ti-isopropoxide as the titanium source into hydrochloric acid solution at mild conditions. The crystal structures such as anatase, rutile and mixed phase of TiO₂ nanoparticles were determined by means of concentration of hydrochloride. Especially, we observed that the rutile TiO₂ crystallites were grown into one-dimensional nanostructures, especially, nanowires, with increasing reaction time. The mechanism of the crystallization of the nanoparticles and the growth habit of TiO₂-rutile structure were discussed.     

Template-assisted hydrothermal synthesis and photocatalytic activity of novel TiO2 hollow nanostructures

TiO₂ hollow nanostructures were successfully synthesized by a controlled hydrothermal precipitation reaction using Resorcinol–Formaldehyde resin spheres as templates in aqueous solution, and then removal of the RF resins spheres by calcination in air at 450 °C for 4 h. The obtained TiO₂ hollow spheres were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption analysis, and UV–visible diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic decolorization of rhodamine B aqueous solution at ambient temperature under UV illumination. The results indicated TiO₂ hollow nanostructures exhibit the excellent photocatalytic activity probably due to the unique hollow micro-architectures.     

Hydrothermal synthesis of titanate nanostructures with high UV absorption characteristics

The titanate nanostructures with high UV absorption characteristics could be fabricated by hydrothermal method within a temperature range of 90–150 °C. TEM, XRD, BET analyses, and UV–vis spectroscopy were employed to elucidate the synthesized titanate nanostructure characteristics which were microstructure, phase transformation, specific surface area, and band gap energy, respectively. With an increase in the hydrothermal treating temperature from 90 to 120 °C, the specific surface area of titanate nanostructures was increased from 83 to 258 m²/g, while the band gap energy of titanate nanostructures was increased from 3.44 to 3.84 eV and then slightly decreased to 3.81 eV at 150 °C. The fabricated titanate nanostructures could exhibit higher UV adsorption capability but lower photocatalytic activity when compared with that of commercial TiO₂ powders.     

Low temperature sintering and microwave dielectric properties of TiO2 ceramics

The TiO₂ ceramics were prepared by a solid-state reaction in the temperature range of 920–1100 °C for 2 h and 5 h using TiO₂ nano-particles (Degussa-P25 TiO₂) as the starting materials. The sinterability and microwave properties of the TiO₂ ceramics as a function of the sintering temperature were studied. It was demonstrated that the rutile phase TiO₂ ceramics with good compactness could be readily synthesized from the Degussa-P25 TiO₂ powder in the temperature range of 920–1100 °C without the addition of any glasses. Moreover, the TiO₂ ceramics sintered at 1100 °C/2 h and 920 °C/5 h demonstrated excellent microwave dielectric properties, such as permittivity (Ɛ_r) value >100, Q × f  > 23,000 GHz and τ_f ≅ 200 ppm/°C.     

From AgI/TiO2 to Ag/TiO2: effects of the annealing temperature on the compositions,porous nanostructures,and visible-light photocatalytic properties

AgI/TiO₂ and Ag/TiO₂ porous nanostructures were synthesized using AgNO₃, KI, thioglycollic acid, and tetrabutyl orthotitanate as a precursor. AgI nanoparticles were used as seeds to initiate the nucleation of a precursor TiO₂ shell, and thioglycollic acid acted as a hydrolysis inhibitor and porosity promoter. The hybridized samples were annealed at different temperatures. Porous AgI/TiO₂ nanostructures were formed at low annealing temperatures (300 and 400 °C). At 600 °C, the porous Ag/TiO₂ nanostructures exhibited a plasmon resonance effect. The formation mechanism of the different porous nanostructures was also investigated. Methylene blue solutions were used as wastewater to evaluate the visible-light photocatalytic activity of the samples. The porous nanostructured photocatalyst exhibited substantially high visible-light-induced photocatalytic activity for the photodegradation of methylene blue compared with pristine AgI and TiO₂ nanoparticles.     

Sacrificial template synthesis of core-shell SrTiO3/TiO2 heterostructured microspheres photocatalyst

The core-shell SrTiO₃/TiO₂ heterostructure was obtained via a combined hydrothermal route and calcination treatment using amorphous spherical TiO₂ as both template and reactant. Adjusting the hydrothermal environments can control the morphology of the post-calcined sample when it is hydrothermally treated at 180 °C/3 h and 200 °C/6 h, respectively. Following the heat treatment at 700 °C/4 h, the obtained powder illustrates the core-shell heterostructure with a hierarchical surface, and the diameter of the microsphere is about 700 nm. This synthesizing route facilitates the formation of a concentration gradient of SrTiO₃ and TiO₂, and subsequently constructs a gradient energy level, which helps the samples exhibited an excellent de-colorize activity over the methylene blue. The possible formation mechanism of core-shell SrTiO₃/TiO₂ heterostructures was proposed to guide the further improvement of their photocatalytic activity.     

Hydrothermal synthesis,crystal structure,and thermal stability of a novel 3D cadmium phosphonate with double-stranded helical channels

In the presence of ethylenediamine template agents, a novel 3D cadmium phosphonate with double-stranded helical channels, [enH₂]_0.5[Cd₂(HL)(L)] 1(H₃L =  2-hydroxyphosphonoacetic acid; en = ethylenediamine) has been synthesized by hydrothermal reaction at 140 °C and characterized by single-crystal X-ray diffraction as well as by infrared spectroscopy, elemental and thermogravimetric analysis. The structure of compound 1 comprises right-handed double-stranded helical channels, left-handed double-stranded helical channels and achiral channels that are connected through cadmium atoms and L³⁻ligands to form a meso compound, and the protonated ethylenediamine cations are located inside the achiral channels.     

Synthesis,characterization, and photocatalytic properties of ZnO nano-flower containing TiO2 NPs

In this study, TiO₂-impregnated ZnO nano-flowers were synthesized by one-pot hydrothermal process. Aqueous suspension containing ZnO precursor and commercial TiO₂ NPs (P25) is heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD), which revealed that TiO₂ NPs were attached on the surface of ZnO flower. It was observed that the presence of TiO₂ NPs in the hydrothermal solution could sufficiently decrease the size of ZnO flower. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to be effective photocatalyst under UV-irradiation.     

Dye sensitized solar cells based on hydrothermally grown TiO2 nanostars over nanorods

A rutile titanium dioxide nanostar over nanorods is synthesized by a simple and cost-effective hydrothermal deposition method onto conducting glass substrates. In order to study the effect of precursor concentrations on the growth of TiO₂, the amount of Ti precursor is varied from 0.1 mL to 0.5 mL at the interval of 0.1 mL. These TiO₂ thin films are characterized for their morphological, structural, optical and J–V properties using various characterization techniques. SEM images showed the formation of densely packed nanostars over nanorods for 0.3 mL titanium tetraisopropoxide (TTIP). XRD patterns show the formation of polycrystalline TiO₂ with tetragonal crystal structure possessing rutile phase. Further, the TiO₂ thin films are used for dye sensitized solar cells using N3-dye.The films were photoelectrochemically active and can be viewed as a promising application in DSSC with maximum current density of 1.459 mA/cm² with enhanced photovoltage of 696 mV for the sample prepared at 0.3 mL TTIP.     

Preparation of Li2TiO3 by hydrothermal synthesis and its structure evolution under high energy Ar+ irradiation

Ultrafine lithium titanate (Li₂TiO₃) powder was synthesized by hydrothermal method. The phase formation and transition condition among α, β, and γ-Li₂TiO₃ were discussed. XRD and ICP-AES showed the single α-phase was formed at 180 °C with 2 h hydrothermal reaction, and it transited into β-phase at 400 °C. SEM observation and EDS analysis confirmed the dissolution of TiO₂ and the formation of α-Li₂TiO₃ proceeded simultaneously with preferable growth direction of (-133) lattice. During the phase transition, the powder maintained the small crystallite, which facilitated the fabrication of Li₂TiO₃ bulk with small grain size. After the Ar⁺ irradiation, the surface region to the depth of 3 μm of Li₂TiO₃ ceramic was affected, where the decrease of crystallization and disturbance of short-range order were confirmed by GIXRD and Raman spectroscopy. In spite of the structure change at the surface area, the ceramic bulk maintained the same.     

Effect of microstructural evolution on wettability and tribological behavior of TiO2 nanotubular arrays coated on Ti–6Al–4V

Self-organized TiO₂ nanotubular arrays were fabricated by electrochemical anodization of Ti–6Al–4V plates in an NH₄F/H₃PO₄ electrolyte. The effect of microstructural evolutions on the wettability and tribological behavior of the TiO₂ nanotubes was investigated. Based on the XRD profiles of the fabricated material, the characteristic TiO₂ peaks were not recognized after anodization; however, highly crystalline TiO₂ (anatase and rutile) was formed due to crystallization during annealing at 500 °C for 1.5 h. The nanotube arrays were converted entirely to rutile at 700 °C. From a microstructure point of view, a highly ordered nanotube structure was achieved when the specimen was annealed at 500 °C, with a length of 0.72 μm and a pore diameter of 72 nm. Further increasing the annealing temperature to 700 °C resulted in the complete collapse of the tubular structure. The results indicate that the improved wettability of the anodized specimens was due to the combination of the effects of both the surface oxide layer and the increased surface roughness achieved after anodization. Moreover, the wear resistance and wettability of the sample annealed 500 °C were improved due to the high hardness (435 HV) and low coefficient of friction (0.133–168) of the highly crystalline structure of the TiO₂ nanotubes.     

Probing the oxidation behavior of Ti2AlC MAX phase powders between 200 and 1000 °C

Oxidation of commercial Ti₂AlC MAX phase powders at 200–1000 °C has been investigated by XRD, XPS, SEM, STA and TGA coupled with FTIR. These powders are a mixture of Ti₂AlC, Ti₃AlC₂, TiC and Ti_1.2Al_0.8. Oxidation at 400 °C led to disappearance of carbide phases from Ti 2p, Al 2p and C 1s XPS spectra. At 600 °C, powders changed from dark grey to light grey with a significant volume increase due to crack formation. Powders were severely oxidized by detecting rutile with minor anatase TiO₂. At 800 °C, α-Al₂O₃ was detected while anatase transformed into rutile TiO₂. The cracks were healed and disappeared. At 1000 °C, the Ti₂AlC powders were fully oxidized into rutile TiO₂ and α-Al₂O₃ with a change of powder color from light grey to yellow. FTIR detected the release of C as CO₂ from 200 °C onwards but with additional CO above 800 °C.     

Effect of synthesis parameters on the size of cobalt ferrite crystallite

Nanoparticles of cobalt ferrite (CoFe₂O₄) were synthesized by the EDTA/Citrate complexing method and hydrothermal method without addition of surfactant. The influence of the pH of the reaction medium (8, 9 or 10), the temperature of the thermal treatment (600 °C, 800 °C or 1000 °C for the EDTA/Citrate method, and 120 °C, 140 °C or 160 °C for the hydrothermal method), and the duration of the thermal treatment (2, 4 or 6 h for the EDTA/Citrate complexing method, and 6, 15 or 24 h for the hydrothermal method) on the average crystallite size was studied by means of an experimental design based on the results obtained by XRD. Statistical analysis led to quantification of the influence of the synthesis parameters on the crystallite size of the powders. Results showed that the pH of the reaction medium is the parameter that shows the greatest influence on the growth of the crystallites of the powders obtained by the hydrothermal method, while calcination temperature is the most significant one for the powders produced by the EDTA/Citrate complexing method.     

Supercritical hydrothermal synthesis of titanium dioxide nanostructures with controlled phase and morphology

A novel template- and organic-free synthesis of TiO₂ nanostructures with controlled phase and morphology was realized through batch supercritical hydrothermal treatment (400 °C) of titanate nanotubes (TNTs) with H₂O₂ in NaOH aqueous solution. Well-defined 3D titanate hierarchical spheres (THSs), 2D multilayered titanate nanosheets (TNSs), and 1D monodisperse anatase nanorods (ANRs) exposing (0 1 0) facets were prepared in 15 min by slightly varying the NaOH solution pH. Specifically, the obtained Na/H-THSs (without/with HCl neutralization) exhibited highly porous structures with large specific surface area (109 m² g⁻¹ and 196 m² g⁻¹, respectively). Temperature-dependent phase and morphology evolutions of products under subcritical condition (200 and 300 °C) were investigated. The formation of the TiO₂ nanostructures from TNTs was proposed mainly following a dissolution–nucleation-growth mechanism, suggesting that both supercritical temperature and NaOH solution pH were determinant factors governing the nucleation and growth process and thus the phase and morphology.     

Phase development in the catalytic system V2O5/TiO2 under oxidising conditions

The target of this work was to investigate phase development in the catalyst system consisting of TiO₂ (anatase) and V₂O₅ (Shcherbinaite). Thus, a set of V₂O₅/TiO₂ specimens was prepared by ball milling and exposed to subsequent annealing in air in the temperature range from 400 to 700 °C. The XRD-results showed the presence of anatase and shcherbinaite as the only phases up to 525 °C. For temperatures above 525 °C the peak intensities were diminishing and rutile as a new TiO₂-phase occurred. Peak intensities and positions were shifted. No loss of oxygen or vanadium was detected. The reaction involves the formation of a rutile solid solution containing VO_x species. XPS studies showed an oxidation state of 4.75 for V in the rutile solid solution as compared to 4.65 in the shcherbinaite. A rutile solid solution once formed could not be re-transformed.The rutile solid solution was first found at 525 °C < T < 550 °C for compositions of 3 mol% < V₂O₅ < 5 mol%. The phase field for rutile solid solutions extends to 10 mol% < V₂O₅ < 12.5 mol% at 675 °C. For very high V₂O₅ concentrations (95 mol% V₂O₅) a eutectic reaction was found at 631 °C. The DTA runs showed a widened endothermic melting peak and a very sharp crystallization peak on cooling. A shcherbinaite structure remained with shifted peak intensities and positions due to the alloying of Ti-ions.SEM inspections showed that the rutile formation and the eutectic reaction both cause a substantial grain growth and a loss of surface area. The catalytic activity is entirely lost when the rutile formation occurs. The knowledge of phase relations helps to find the appropriate processing conditions and to understand the aging phenomena of catalysts.     

Preparation,characterization and photocatalytic activity evaluation of micro- and mesoporous TiO2/spherical activated carbon

The influences of heat-treatment temperature and activation time on the properties of TiO₂ supported on spherical activated carbon (TiO₂/SAC) were investigated. Nano-sized TiO₂ was dispersed on the spherical activated carbon with the size of 10–30 nm. Some anatase phase of TiO₂ was transformed to rutile phase of TiO₂ with an increase of heat-treatment temperature. All of the TiO₂/SAC photocatalysts had microporous structure, with the mesopore volume increasing over an activation time of 6 h. The TiO₂/SAC photocatalysts obtained at activation times of 6 h and 9 h were observed synergistic effects between adsorption and photocatalysis in the removal of humic acid.     

A micro sensor based on TiO2 nanorod arrays for the detection of oxygen at room temperature

A new micro gas sensor based on the TiO₂ nanorod arrays (NRAs) was developed and its response properties to oxygen (O₂) at room temperature were investigated. The micro sensor combined a pair of micro interdigitated electrodes realized by the MEMS process and sensing materials based on the TiO₂ NRAs. The TiO₂ NRAs were selectively grown on the patterned straps of Ti/Pd films through the acid vapor oxidation (AVO) process. Relationship between the morphology of the TiO₂ NRAs and reaction temperatures was analyzed with the scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The results indicate that the diameters of the TiO₂ NRs enlarged as the reaction temperature increased from 140 °C to 180 °C. The TiO₂ NRAs sensors showed a good response to O₂ at room temperature (25 °C) due to the large specific surface areas of the TiO₂ NRs and the TiO₂ NR/NR junctions. The TiO₂ NRAs sensors prepared at 140 °C for 3 h exhibited better response properties to O₂ at room temperature with a fast response and recovery time. The research indicates that the TiO₂ NRAs prepared by the simple AVO process is a good choice for detecting O₂ at room temperature.     

Decomposition of nonionic surfactant on a nitrogen-doped photocatalyst under visible-light irradiation

A visible-light-active N-containing TiO₂ photocatalysts were prepared from crude amorphous titanium dioxide by heating amorphous TiO₂ in gaseous NH₃ atmosphere. The calcination temperatures ranged from 200 to 1000 °C, respectively. UV–vis/DR spectra indicated that the N-doped catalysts prepared at temperatures <400 °C absorbed only UV light (E_g = 3.3 eV), whereas samples prepared at temperatures ≥400 °C absorbed both, UV (E_g = 3.10–3.31 eV) and vis (E_g = 2.54–2.66 eV) light. The chemical structure of the modified photocatalysts was investigated using FT-IR/DRS spectroscopy. All the spectra exhibited bands indicating nitrogen presence in the catalysts structure. The photocatalytic activity of the investigated catalysts was determined on a basis of a decomposition rate of nonionic surfactant (polyoxyethylenenonylphenol ether, Rokafenol N9). The most photoactive catalysts were those calcinated at 300, 500 and 600 °C. For the catalysts heated at temperatures of 500 and 600 °C Rokafenol N9 removal was equal to 61 and 60%, whereas TOC removal amounted to 40 and 35%, respectively. In case of the catalyst calcinated at 300 °C surfactant was degraded by 54% and TOC was removed by 35%. The phase composition of the most active photocatalysts was as follows: (a) catalyst calcinated at 300 °C—49.1% of amorphous TiO₂, 47.4% of anatase and 3.5% of rutile; (b) catalyst calcinated at 500 °C—7.1% of amorphous TiO₂, 89.4% of anatase and 3.5% of rutile; (c) catalyst calcinated at 600 °C—94.2% of anatase and 5.8% of rutile.     

Aluminum titanate based ceramics from aluminum sludge waste

This work aims at obtaining aluminum titanate-based ceramics (Al₂TiO₅: AT) composites from industrial wastes. Al-sludge waste and rutile ore were used as rich sources of alumina and titania instead of pure materials. Sludge-(0–40 wt%) rutile mixtures were mixed, formed and fired at 1350 °C for various times. Phase composition, microstructure, densification, mechanical and thermal behaviors of the obtained AT composites have been investigated. Complete conversion of the starting materials to AT with bulk density of 3.199 g/cm³, compressive strength and modulus of rupture of 326.425 MPa and 30.84 MPa, respectively and very low CTE (−0.927*10⁻⁶ K⁻¹) were achieved by firing the sludge-(30 wt%) rutile at 1350 °C for 4 h. These results suggest that the obtained AT-ceramics from Al-sludge waste-rutile ore are a promising and an ecofriendly route.     

Low temperature sintering of ZnTiO3/TiO2 based dielectric with controlled temperature coefficient

Structure, microstructure and dielectric properties of ZnTiO₃ and rutile TiO₂ mixtures (ZnTiO₃ + xTiO₂ with x = 0, 0.02, 0.05, 0.1, 0.15 and 0.2) sintered using ZnO–B₂O₃ glass phase (5 wt.% added) as sintering aid have been investigated. For all compounds, the sintering temperature achieves 900 °C. The X-ray diffraction patterns indicate for x = 0.1 that the material is composed by three phases identified as ZnTiO₃ hexagonal, TiO₂ rutile and ZnO. The presence of ZnO is explained by the introduction of Ti into Zn site to form the (Zn_1−xTi_x)TiO_3+x solid solution in resulting the departure of ZnO from the ZnTiO₃ structure. The ZnTiO₃ + 0.15TiO₂ composition sintered at 900 °C with glass addition exhibits attractive dielectrics properties (ɛ_r = 23, tan(δ) < 10⁻³ and a temperature coefficient of the dielectric constant near zero (τ_ɛ = 0 ppm/°C)) at 1 MHz. It is also shown that the introduction of TiO₂ allows to tune the temperature coefficient of the permittivity. All these properties lead this system compatible to manufacture silver based electrodes multilayer dielectrics devices.