Tuning size and up-conversion luminescence of CeO2:Yb3+/Er3+ nanoparticles through lanthanide doping

Particle size is a critical parameter in up-conversion luminescence tuning and application research. In this study, CeO₂:Yb³⁺/Er³⁺ nanospheres were synthesized via coprecipitation. The average size of these nanospheres gradually decreased as the Yb³⁺ doping concentration increased, which might be attributed to the influence of Yb³⁺ doping on the growth rate of nanospheres by surface charge repulsion. Upon exciting these nanospheres using a 980-nm laser, the corresponding up-conversion red-green emission intensity ratio gradually increased as the Yb³⁺ doping concentration increased, which might be ascribed to two reasons: the strengthened ⁴S_3/2 → ⁴F_9/2 nonradiative relaxation process and the enhanced Er³⁺ → Yb³⁺ energy back-transfer process. To assess the influence of the nonradiative relaxation process on the up-conversion emission red-green ratios, the down-conversion emission spectra and decay curves of CeO₂:x%Yb³⁺/2%Er³⁺ nanospheres that were excited by a 520 nm laser were investigated. To validate how the particle size affects the up-conversion emission, CeO₂:x%Lu³⁺/2%Yb³⁺/2%Er³⁺ nanospheres of various sizes were synthesized by substituting optically active Yb³⁺ using optically inert Lu³⁺. The corresponding up-conversion emission spectra and decay curves were investigated. The experimental results enhanced our understanding of how lanthanide doping affects the up-conversion luminescence tuning of Er³⁺, offering great potential to regulate the morphology and optical properties of the up-conversion luminescence nanoparticles.     

Color-tunable up-conversion emission in Y2O3:Yb3+, Er3+ nanoparticles prepared by polymer complex solution method

Abstract

Powders of Y₂O₃ co-doped with Yb³⁺ and Er³⁺ composed of well-crystallized nanoparticles (30 to 50 nm in diameter) with no adsorbed ligand species on their surface are prepared by polymer complex solution method. These powders exhibit up-conversion emission upon 978-nm excitation with a color that can be tuned from green to red by changing the Yb³⁺/Er³⁺ concentration ratio. The mechanism underlying up-conversion color changes is presented along with material structural and optical properties.

PACS

42.70.-a, 78.55.Hx, 78.60.-b     

Enhancing upconversion emission and temperature sensing modulation of the La2(MoO4)3: Er3+, Yb3+ phosphor by adding alkali metal ions

Trivalent Er³⁺-doped La₂(MoO₄)₃ upconversion phosphors with intense green emmision were synthesized at 800 °C by the solid-state reaction route, promoting the development of novel optical thermometry. The color emitted from the samples was minorly affected by the excitation power and doping concentration. Yb³⁺ is a better sensitizer for the La₂(MoO₄)₃: Er³⁺ phosphor and it can enhance the emission intensity when a certain amount is co-doping in the system. The up-conversion luminescent mechanism was investigated using the pump power-dependent UC emission spectra. Alkali metal doping increased the up-conversion emission intensities drastically, and Li⁺ ions can enhance the luminous intensity by more than 20 times. The fluorescence intensity ratio of the transition emission ²H_11/2-⁴I_15/2 and ⁴S_3/2-⁴I_15/2 was used to study upconversion optical temperature sensing. The sensitivity changes from doping with diverse alkali metal ions and their effects on the optimal temperature range are discussed in detail. Alkali metal ions doping extended the temperature range, indicating that this phosphor is a potential candidate for temperature-sensing probes.     

Electrospinning-derived YVO4:Er/Yb nanowires and nanotubes with temperature sensitivity of their up-converted emission

YVO₄:Er/Yb nanowires and nanotubes phosphors were prepared by electrospinning technique following calcination at different heating rates. The obtained nanowires are of 80–200 nm in diameter and are single crystals or polycrystalline in phase. The outer diameter of the obtained nanotubes is 50–200 nm with a wall thickness of 20–30 nm. The up-conversion properties of YVO₄:Er³⁺/Yb³⁺ nanowires and nanotubes were investigated. All samples were found to produce a green up-converted emission. The temperature-sensing features of YVO₄:Er³⁺/Yb³⁺ nanowires and nanotubes were investigated through the fluorescence intensity ratio approach, and the sensitivity of temperature was determined over the temperature range of 30–390 °C. The temperature sensing sensitivities of the mixed YVO₄:Er³⁺/Yb³⁺ nanowire samples and nanotubes exceeded the single YVO₄:Er³⁺/Yb³⁺ nanowire samples because of higher Yb³⁺-doped concentrations. The morphology influence on optical properties was studied at a fixed doping rare earth concentration and size. The temperature sensitivities of YVO₄:Er/Yb samples depended on the Yb ion concentrations rather than the morphology. The significant temperature sensitivity indicates its potential for use as an optical temperature sensing probe.     

Optical Temperature Sensing Behavior of High‐Efficiency Upconversion: Er3+–Yb3+ Co‐Doped NaY(MoO4)2 Phosphor

A class of Yb³⁺/Er³⁺ co‐doped NaY(MoO₄)₂ upconversion (UC) phosphors have been successfully synthesized by a facile hydrothermal route with further calcination. The structural properties and the phase composition of the samples were characterized by X‐ray diffraction (XRD). The UC luminescence properties of Yb³⁺/Er³⁺ co‐doped NaY(MoO₄)₂ were investigated in detail. Concentration‐dependent studies revealed that the optimal composition was realized for a 2% Er³⁺ and 10% Yb³⁺‐doping concentration. Two‐photon excitation UC mechanism further illustrated that the green enhancement arised from a novel energy‐transfer (ET) pathway which entailed a strong ground‐state absorption of Yb³⁺ ions and the excited state absorption of Yb³⁺–MoO₄^2? dimers, followed by an effective energy transfer to the high‐energy state of Er³⁺ ions. We have also studied the thermal properties of UC emissions between 303 and 523 K for the optical thermometry behavior under a 980 nm laser diode excitation for the first time. The higher sensitivity for temperature measurement could be obtained compared to the previous reported rare‐earth ions fluorescence based optical temperature sensors. These results indicated that the present sample was a promising candidate for optical temperature sensors with high sensitivity.     

Power dependent upconversion in Er3+/Yb3+ co-doped BiNbO4 phosphors

In the present article, optical properties and energy upconversion in Er³⁺/Yb³⁺ co-doped BiNbO₄ matrix were investigated. The BiNbO₄ matrix was prepared using the solid-state reaction method. X-ray diffraction of the matrix shows that the crystal structure is consistent with ICSD code 74338. The grain distribution and the behavior of doping with Er³⁺ and Yb³⁺ on the sample surface were obtained by scanning electron microscope. Raman spectral characterization was carried out to examine the behavior of the vibrational modes of the samples. Upconversion emissions in the visible region at 484.5, 522, 541.5 and 670.5 nm in the matrices BiNbO₄:Er,Yb and BiNbO₄:Er were observed and analyzed as a function of 980 nm laser excitation power and rare-earth doping concentration. The results show that BiNbO₄ is a promising host material for efficient upconversion phosphors.     

Yb3+ concentration on emission color,thermal sensing and optical heater behavior of Er3+ doped Y6O5F8 phosphor

Up-conversion phosphor is a potential candidate as non-contact temperature sensor because of its unjammable and unique detection abilities. In this work, we investigate the influence of Yb³⁺ concentration on the emission color, thermal sensing and optical heater behavior of Er³⁺ doped Y₆O₅F₈ phosphor. Our results show that the emission color of Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder changes from green to yellow with the Yb³⁺ concentration increasing. Importantly, the temperature sensing sensitivities of Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder reach 0.008, 0.009, 0.010 and 0.011 K⁻¹ as the sample doped with 2%, 5%, 8% and 11% Yb³⁺ at 476 K, respectively. Moreover, the temperature of high Yb³⁺ concentration sample shows preferable optical heating behavior, whose temperature is ascended by a large value of 94 K when the excitation pump power density changes from 1.0 to 13.1 W cm⁻². These results suggest Er³⁺ and Yb³⁺ co-doped Y₆O₅F₈ powder has great potential in colorful display, temperature sensing and optical heating.     

Synthesis and up-conversion of Er3+ and Yb3+ Co-doped LiY(MoO4)2@SiO2 for optical thermometry applications

Non-contact temperature sensors based on the fluorescence intensity ratio (FIR) have been widely investigated owing to their high sensitivity and reliable real-time monitoring. Herein, the SiO₂-coated LiY(MoO₄)₂@SiO₂:Er³⁺,Yb³⁺ phosphor was investigated as an optical thermometry material, which was synthesized using the conventional solid state reaction and coated by a facile wet chemical route. The effect of surface modification on FIR was systematically characterized by structural analyses and spectral measurements and the temperature-dependent up-conversion FIR was investigated from 303 to 603 K under a 980 nm laser excitation. The results showed that the FIR value was thermally stable and the SiO₂ coating led to a higher FIR sensitivity as well as a higher saturation threshold. This work would pave a way to design interesting optical thermometry materials in up-conversion phosphors with better properties.     

Transparent Sr0.84Lu0.16F2.16: Yb3+, Er3+ glass ceramics: Elaboration,structure, up-conversion properties and applications

The development of optical temperature sensors is of fundamental and industrial importance for various applications. Despite the great advance in optical temperature-sensing techniques, challenges remain to search for novel sensing materials with low cost, easy fabrication and high sensitivity. Here, transparent glass ceramics (GC) embedded with cubic Sr_0.84Lu_0.16F_2.16:Yb³⁺/Er³⁺ nano-crystals were prepared via thermal annealing on the parent glass. The optical and structural properties were investigated. The enhanced emission intensity, obvious Stark splitting and prolonged lifetimes of Er³⁺ confirm the enrichment of Er³⁺ ions into formed Sr_0.84Lu_0.16F_2.16 nano-crystals. The temperature sensing performance of Yb³⁺/Er³⁺ ions in Sr_0.84Lu_0.16F_2.16GC were investigated based on up-conversion intensity ratio (FIR) from thermally coupled emitting states of Er³⁺. High energy difference ($\Delta E$?=?839?cm^?1) and high absolute sensitivity (27.4?×?10^?4?K^?1 at 606?K) are obtained. Our results reveal Sr_0.84Lu_0.16F_2.16GC are excellent host for rare earth ions doping and potential candidate for optical thermometry.     

A Novel Multifunctional Upconversion Phosphor: Yb3+/Er3+ Codoped La2S3

Yb³⁺/Er³⁺ codoped La₂S₃ upconversion (UC) phosphors have been synthesized using high‐temperature solid‐state method. Under 971‐nm excitation, the maximum luminescence power can reach 0.64 mW at the excitation power density of 16 W/cm² and an absolute power yield of 0.36% was determined by an absolute method at the excitation power density of 3 W/cm², and the quantum yield of La₂S₃:Yb³⁺, Er³⁺ (green ~0.18%, red ~0.03%, integration ~0.21) was comparable to that of NaYF₄:Yb³⁺, Er³⁺ nanocrystals (integration ~0.005–0.30). Frequency upconverted emissions from two thermally coupled excited states of Er³⁺ were recorded in the temperature range 100–900 K. The maximum sensitivity of temperature sensing is 0.0075 K^?1. As the excitation power density increases, the temperature of host materials rapidly rises and the top temperature can reach to 600 K. Given the intense UC emission, high sensitivity, as well as good photothermal stability, La₂S₃:Yb³⁺/Er³⁺ phosphor can become a promising composite material for photothermal ablation of cancer cells possessing the functions of temperature sensing and in vivo imaging.     

Optimization of sensitizer concentration for upconversion photoluminescence of Yb3+/Er3+: La10W22O81 nanophosphor rods

Yb³⁺/Er³⁺codoped La₁₀W₂₂O₈₁ (LWO) nanophosphor rods have been successfully synthesized by a facile hydrothermal assisted solid state reaction method, and their upconversion photoluminescence properties were systematically studied. X-ray diffraction patterns revealed that the nanophosphors have an orthorhombic structure with space group Pbcn (60). A microflowers-like morphology with irregular hexagonal nanorods was observed using field emission scanning electron microscopy for the Yb³⁺(2 mol%)/Er³⁺(2 mol%):LWO nanophosphor. The shape and size of the nanophosphor and the elements along with their ionic states in the material were confirmed by TEM and XPS studies, respectively. A green upconversion emission was observed in the Er³⁺: LWO nanophosphors under 980 nm laser excitation. A significant improvement in upconversion emission has been observed in the Er³⁺: LWO nanophosphors by increasing the Er³⁺ ion concentration. A decrease in the upconversion emission occurred due to concentration quenching when the doping concentration of Er³⁺ ions was greater than 2 mol%. An optimized Er³⁺(2 mol%): LWO nanophosphor exhibited a strong near infrared emission at 1.53 μm by 980 nm excitation. The green upconversion emission of Er³⁺(2 mol%): LWO was remarkably enhanced by co-doping with Yb³⁺ ions under 980 nm excitation because of energy transfer from Yb³⁺ to Er³⁺. The naked eye observed this upconversion emission when co-doping with 2 mol% Yb³⁺. In order to obtain the high upconversion green emission, the optimized sensitizer concentration of Yb³⁺ ions was found to be 2 mol%. The upconversion emission trends were studied as a function of stimulating laser power for an optimized sample. Moreover, the NIR emission intensity has also been enhanced by co-doping with Yb³⁺ ions due to energy transfer from Yb³⁺ to Er³⁺. The energy transfer dynamics were systematically elucidated by energy level scheme. Colorimetric coordinates were determined for Er³⁺ and Yb³⁺/Er³⁺: LWO nanophosphors. The energy transfer mechanism was well explained and substantiated by several fluorescence dynamics of upconversion emission spectra and CIE coordinates. The results demonstrated that the co-doped Yb³⁺(2 mol%)/Er³⁺(2 mol%): LWO nanophosphor material is found to be a suitable candidate for the novel upconversion photonic devices.     

Broad-scope dual-mode modulation thermometry based on up-conversion phosphor GaNbO4: Yb3+/Er3+

Fluorescence temperature measurement technology has set off another upsurge in non-contact temperature measurement, but still suffers from the large error for single-mode thermometry. Herein, in a broad temperature range of 93–633 K, a dual-mode modulation thermometry based on up-conversion phosphor of GaNbO₄:Yb³⁺/Er³⁺ is realized with the maximum relative sensitivity (S_r) of 11.7% K⁻¹ (93 K) and 13.1% K⁻¹ (123 K), respectively. GaNbO₄:Yb³⁺/Er³⁺ phosphors were synthesized by high temperature solid-state method. The structure, surface morphology and the optical properties were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The fluorescence intensity ratio (FIR) readout method based on Er³⁺ thermal-coupled energy level (TCL) and non-thermal-coupled energy level (NTCL) was used to achieve the dual-mode temperature measurement with high temperature resolution and good repeatability in GaNbO₄:5 mol% Yb³⁺ and 5 mol% Er³⁺ phosphors. All the results show that GaNbO₄:Yb³⁺/Er³⁺ phosphors have great application potential in high sensitivity broadband thermometry.     

Multifunctional optical thermometry based on the stark sublevels of Er3+ in CaO-Y2O3: Yb3+/Er3+

A conventional high temperature solid state method was utilized to prepare CaO-Y₂O₃, which is a potential candidate for manufacturing crucible material to melt titanium and titanium alloys with low cost. Meanwhile, Yb³⁺ ions and Er³⁺ ions were selected as the sensitizers and activators respectively to dope into CaO-Y₂O₃, aimed at providing real-time optical thermometry during the preparation process of titanium alloys realized using fluorescence intensity ratio (FIR) technology. The results reveal that a high measurement precision can be acquired by using the Stark sublevels of Er^{3+ 4}F_9/2 to measure the temperature with a maximum absolute error of only about 3 K. In addition, by analyzing the dependence of ⁴I_13/2 → ⁴I_15/2 transition on pump power of 980 nm excitation wavelength, it was found that the laser-induced thermal effect has almost no influence on the temperature measurement conducted by using the FIR of the Stark sublevels of Er^{3+ 4}I_13/2, which means that a high excitation pump power can be used to obtain strong NIR emission and good signal-to-noise ratio for optical thermometry without the influence of the laser-induced thermal effect. All the results reveal that CaO-Y₂O₃: Yb³⁺/Er³⁺ is an excellent temperature sensing material with high measurement precision.     

Enhancement of up-conversion emission and emerging cool white light emission in co-doped Yb3+/ Er3+: Li2O-LiF-B2O3-ZnO glasses for photonic applications

A series of co-doped (Yb³⁺/Er³⁺): Li₂O-LiF-B₂O₃-ZnO glasses were prepared by standard melt quenching technique. Structural and morphological studies were carried out by XRD and FESEM. Phonon energy dynamics have been clearly elucidated by Laser Raman analysis. The pertinent absorption bands were observed in optical absorption spectra of singly doped and co-doped Yb³⁺/Er³⁺: LBZ glasses. We have been observed a strong up-conversion red emission pertaining to Er³⁺ ions at 1.0 mol% under the excitation of 980 nm. However, the up-conversion and down conversion (1.53 µm) emission intensities were remarkably enhanced with the addition of Yb³⁺ ions to Er³⁺: LBZ glasses due to energy transfer from Yb³⁺ to Er³⁺. Up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses exhibits three strong emissions at 480 nm, 541 nm and 610 nm which are assigned with corresponding electronic transitions of ²H_9/2 → ⁴I_15/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 respectively. Consequently, the green to red ratio values (G/R) also supports the strong up-conversion emission. The Commission International de E′clairage coordinates and correlated color temperatures (CCT) were calculated from their up-conversion emission spectra of co-doped (Yb³⁺/Er³⁺): LBZ glasses. The obtained chromaticity coordinates for optimized glass (0.332, 0.337) with CCT value at 5520 K are very close to the standard white colorimetric point in cool white region. These results could be suggested that the obtained co-doped (Yb³⁺/Er³⁺): LBZ glasses are promising candidates for w-LEDs applications.     

Thermal effects of Er3+/Yb3+‐doped NaYF4 phosphor induced by 980/1510 nm laser diode irradiation

The thermal effects of Er/Yb‐doped NaYF₄ phosphor induced by 980/1510 nm laser diode irradiation were intuitively and contrastively investigated using an infrared thermal imaging technology with real‐time online monitoring. The Yb³⁺/Er³⁺ codoped materials have strong thermal effects and high‐temperature elevation under 980 nm irradiation. However, the severe thermal effects of materials with higher Er³⁺ ion doping concentration are remarkably attributed to the cross relaxation between the Er³⁺ ions under 980 nm irradiation. The energy transfer between Er³⁺ and Yb³⁺ ions in Er³⁺/Yb³⁺‐codoped materials also contributes to the thermal effects under 1510 nm laser diode irradiation. Under the same testing conditions, the temperature elevation ?T of samples induced by 1510 nm laser diode irradiation is lower than that induced by 980 nm laser diode irradiation. The temperature rising rate and elevation ?T value of samples depend on the ion doping concentration and power density of the laser diode excitation. The internal temperature of the samples exhibits deep temperature gradient under 980/1510 nm laser diode irradiation. By comparing the two kinds of thermometry methods, the temperature value calculated by fluorescence intensity ratio is almost similar to that obtained through infrared thermal imaging technology under higher excitation power pumping.     

Ionic liquid-assisted two-phase synthesis of Lu7O6F9:Yb3+, Er3+ phosphors and their morphological control,color-tunable up-conversion luminescence and temperature sensing behavior

In this work, Lu₇O₆F₉ microcrystals with various novel morphologies, including hand broom-like nanorods, nanoparticles, hexagons, spindle-like nanoparticle aggregates, hexagonal prisms and microrods, were prepared via ionic liquid-assisted two-phase method and following calcination approach. Ionic liquid was used as F^? resource, morphology controller and two-phase solvent. The effect of preparation condition on the phases and morphologies of the precursors as well as the calcined products was studied in detail. The crystallographic structure of Lu₇O₆F₉ was also confirmed by the down-conversion (DC) spectra of Lu₇O₆F₉: Eu³⁺ phosphor with Eu³⁺ ion as the structure probe. Besides, different concentration of Yb³⁺ ions were introduced to the host to obtain Lu₇O₆F₉: Yb³⁺, Er³⁺ phosphors, in case of subsequent investigation on the up-conversion (UC) luminescence properties, UC mechanism and followed temperature sensing behavior. Color-tunable UC emissions were realized and the mechanism was discussed. Furthermore, the optical temperature sensing behavior of orthorhombic Vernier lutecium oxyfluoride was investigated for the first time. The influence of Yb³⁺ content on the sensing sensitivity was also elaborated. These results imply that the as-prepared Lu₇O₆F₉: Yb³⁺, Er³⁺ phosphors could be considered as candidates in color-tunable displaying and optical thermometers.     

Up-conversion luminescence and optical thermometry properties of transparent glass ceramics containing CaF2:Yb3+/Er3+ nanocrystals

A series of Yb³⁺/Er³⁺ codoped transparent oxyfluoride glass ceramics with various amounts of Yb³⁺ have been successfully fabricated and characterized. Under 980 nm laser prompting, the samples produce intense red, green and blue up-conversion emissions, and the emission intensities increase with Yb³⁺ concentration and heat treatment temperature. Before losing good transparency in the visible region, optimum emission intensities are obtained for the sample with 25 mol% of Yb³⁺ at a heat treatment temperature of 680 °C. A possible up-conversion mechanism is proposed from the dependence of emission intensities on pumping power. The fluorescence intensity ratio between the two thermally coupled levels ²H_11/2 versus ⁴S_3/2 was measured with the laser output power of 57 mW to avoid the possible laser induced heating effect. The fluorescence intensity ratio values in the temperature range from 295 K to 723 K can be well fitted with the equation: A exp (−∆E/k_BT), where A = 6.79 and ∆E=876 cm⁻¹. The relative temperature sensitivity at 300 K was evaluated to be 1.4% K⁻¹. All the results suggest that the Yb³⁺/Er³⁺ codoped CaF₂ glass ceramics is an efficient up-conversion material with potential in optical fiber temperature sensing.     

Up-conversion luminescence and temperature-sensing properties of Li+, K+ doped Na2Zn3Si2O8: Er3+ phosphors

In this work we detail the preparation of new luminescent Li⁺ and K⁺ doped Na₂Zn₃Si₂O₈: Er³⁺ up-conversion phosphors using the high-temperature solid-phase method. We investigate the phosphors phase structure, elemental distribution, up-conversion luminescence characteristics and temperature sensing properties. Our fabricated samples were found to be homogeneous and when excited using 980 nm light, they emitted wavelengths in the green and red visible wavelength bands, which correspond to two major emission bands of Er³⁺. Doping with Li⁺ and K⁺ increased the luminescence intensity of the Na₂Zn₃Si₂O₈: Er³⁺ phosphor at 661 nm by 36 and 21 times respectively. The highest relative temperature sensitivity (Sa) of the fabricated phosphor reached a value of 19.69% K^?1 and the highest absolute temperature sensitivity (Sr) reached 1.20% K^?1. These values are superior to other materials which utilize up-conversion by Er³⁺ ions as a tool for temperature sensing. We anticipate that these new phosphors will find significant application as components in optical temperature measurement systems.     

Quantitative relationship between microstructure and optical properties of Er3+-Yb3+ co-doped glass-ceramics containing pyrochlore-type crystalline phases

Er³⁺-Yb³⁺ co-doped transparent glass-ceramics (GCs) containing Y₂Ti₂O₇ crystalline phase were prepared by the melting crystallization method. The qualitative relationship between light transmittance and three-dimensional structure parameters of glass-ceramic was studied according to the principle of stereology under different heat treatment conditions. As indicated by the research results, the light transmittance decreased with the increase in the equivalent spherical diameter (D_3S) and specific surface area per unit volume of the grains (S_V). However, the light transmittance increased linearly with the increase in the discrete grains (S_VP) and the mean free distance (λ). The up-conversion luminescence intensity was found to be most vigorous under Er³⁺ and Yb³⁺ doping concentrations of 0.5% and 0.9%, respectively, at 980 nm excitation. Considering the correlation between pump power and up-conversion emission intensity, the up-conversion luminescence mechanism was explored. As revealed by the results of color purity and chromaticity coordinates, Er³⁺-Yb³⁺ co-doped GCs containing Y₂Ti₂O₇ have promising applications in green up-conversion luminescence.     

Improved photoluminescence and multi-mode optical thermometry of Er3+/Yb3+ co-doped (Ba,Sr)3Lu4O9 phosphors

Contactless optical thermometers have attracted extensive attentions for applications in scientific research and technological fields due to their apparent advantages. Herein, a novel sequence of Ba_3-xSr_xLu₄O₉ (B_3-xS_xLO):Er³⁺/Yb³⁺ phosphors were successfully prepared to investigate the temperature sensing property. By establishing energy transfer from Yb³⁺ to Er³⁺ and regulating the local lattice environment, up-conversion luminescence of Er³⁺ is dramatically improved when excited by 980 nm laser. This can effectively promote signal-noise ratio and reduce the errors in temperature detection. Furthermore, a multi-mode optical thermometry, which includes the fluorescence intensity ratio (FIR) from two thermally coupled levels of ²H_11/2/⁴S_3/2, FIR based on non-thermally coupled system of ²H_11/2/⁴F_9/2 and fluorescence lifetime of ⁴S_3/2 state of Er³⁺, was explored systematically. The fabricated samples exhibit the superior temperature measurement performances containing wide temperature-sensing range, superior signal discriminability, high sensitivity and favorable repeatability, indicative of the enormous utilization prospects of B_3-xS_xLO:Er³⁺/Yb³⁺ for thermometry.