The effect of B-site Y substitution on cubic phase stabilization in (Ba0.5Sr0.5)(Co0.8Fe0.2)O3−δ

The cubic phase mixed ionic-electronic conductor (Ba_0.5Sr_0.5)(Co_0.8Fe_0.2)O_3−δ (BSCF) is well-known for its excellent oxygen ion conductivity and high catalytic activity. However, formation of secondary phases impedes oxygen ion transport and consequentially a widespread application of BSCF as oxygen transport membrane. B-cation substitution by 1, 3 and 10 at.% Y was employed in this work for stabilization of the cubic BSCF phase. Secondary phase formation was quantified on bulk and powder samples exposed to temperatures between 640 and 1100°C with annealing time up to 44 days. The phase composition, cation valence states, and chemical composition of all samples were analyzed by high-resolution analytical electron microscopic techniques. Y doping effectively suppresses the formation of Ba_n+1Co_nO_3n+3(Co₈O₈) (n ≥ 2) and Co_xO_y phases which would otherwise act as nucleation centers for the highly undesirable hexagonal BSCF phase. This work validates for 10 at.% Y cation substitution perfect stabilization of the cubic BSCF phase at temperatures ≥800°C, while a negligible small volume fraction of the hexagonal BSCF phase was found at lower temperatures. A newly developed model describes the effect of Y doping on the formation of secondary phases and their effective suppression with increasing Y concentration.     

Synthesis,structure, optical and magnetic properties of Nd1−xAxMn0.5Co0.5O3−δ (A = Ba,Sr and Ca; x = 0 and 0.25)

The structural, optical, and magnetic properties of polycrystalline Nd_1-xA_xMn_0.5Co_0.5O_3−δ (A = Ba, Sr and Ca; x = 0 and 0.25) perovskite oxides were investigated. The powder XRD pattern demonstrates that the unit cell volume decreases with the changing A-site dopant type. The estimated bandgap energy (Eg) from UV–vis spectroscopic for NdMn_0.5Co_0.5O_3−δ, Nd_0.75Ba_0.25Mn_0.5Co_0.5O_3−δ, Nd_0.75Sr_0.25Mn_0.5Co_0.5O_3−δ and Nd_0.75Ca_0.25Mn_0.5Co_0.5O_3−δ are 3.27, 3.82, 3.79 and 3.53 eV respectively. The substitution of divalent element alters the absorption spectrum, while the redshift optical transition was observed with an increasing ionic radius of dopant. Temperature-dependent magnetization exposes that the Curie temperature (TC) gradually decreases with the decreasing size of alkaline earth metals, and glassy nature was observed at a lower applied magnetic field. The observation of TC can be well explained by the considering of the cationic size disorder parameter in A-site than the random distribution of B-site ions.     

Microwave-assisted sintering and improved dielectric,ferroelectric properties of 0.5[(Ba0.7Ca0.3)TiO3]–0.5[Ba(Zr0.2Ti0.8)O3] lead-free ceramics

0.5[(Ba_0.7Ca_0.3)TiO₃]–0.5[Ba(Zr_0.2Ti_0.8)O₃] lead-free ceramics were synthesised by coprecipitation method and sintered by fast microwave sintering (MWS) and by conventional sintering (CS) at 1200°C. After being sintered with the two different methods, the materials were characterised for structural, microstructural, frequency and temperature-dependent dielectric properties, Raman spectroscopy, and ferroelectric measurements. Results are compared and discussed in the present paper. X-ray diffraction confirms the presence of the tetragonal and rhombohedral phases in the composites sintered by both methods. The ferroelectric to paraelectric transition temperature (Tc) is increased in microwave-sintered composite. Diffuse constant (γ) values show BCT–BZT ceramics to be neither normal ferroelectrics nor relaxor ferroelectrics. Raman spectra confirm phase transition in the ceramic samples. Saturation polarisation (Ps) values are 7.62 and 4.28?µC?cm^?2 and nearly equal remanant polarisation (Pr) values were observed for BCT–BZT composite sintered with MWS and CS, respectively.     

Lithium ion conductivity in the solid electrolytes (Li0.25La0.25)1−xM0.5xNbO3 (M=Sr,Ba, Ca,x=0.125) with perovskite-type structure

Perovskite-type structured solid electrolytes with the general formula (Li_0.25La_0.25)_1−xM_0.5xNbO₃ (M=Sr, Ba, Ca, x=0.125) have been prepared by solid-state reaction. Their crystal structure and ionic conductivity were examined by means of X-ray diffraction analysis (XRD), scanning electron microscope (SEM), and alternating current (AC) impedance technique. All sintered compounds are isostructural with the parent compound Li_0.5La_0.5Nb₂O₆. Some impurity phase is detected at the grain boundary in the Ba- and Ca-substituted compounds. The substitution of partial Li⁺ by alkaline earth metal ions has responsibility for the cell volume expansion as determined by the XRD data. The densification is accelerated, with the overall porosity and grain boundary minimized as Sr²⁺ ions are doped. Among the investigated compounds, the perovskite (Li_0.25La_0.25)_0.875Sr_0.0625NbO₃ shows a remarkable ionic conductivity of 1.02×10⁻⁵ S/cm at room temperature (20 °C) and the lowest activation energy of 0.34 eV in comparison with 0.38 eV and 0.44 eV for the corresponding Ba- and Ca-doped samples, respectively. It is identified that the enhancement of ionic conductivity is attributed to a reduction in activation energy for ionic conduction which is related to an increase in the cell volume.