Ultrahigh Q values and atmosphere-controlled sintering of Li2(1+x)Mg3ZrO6 microwave dielectric ceramics

Ultrahigh-Q Li_2(1+x)Mg₃ZrO₆ microwave dielectric ceramics were successfully prepared by means of atmosphere-controlled sintering through simultaneously adopting double crucibles and sacrificial powder. This technique played an effective role in suppressing the lithium volatilization and further promoting the formation of the liquid phase, as evidenced by the X-ray diffraction, microstructural observation and the density measurement. Both dense and even microstructure, and the suppression of detrimental secondary phases contributed to low-loss microwave dielectric ceramics with Q×f values of 150,000–300,000 GHz. Particularly, desirable microwave dielectric properties of ε_r=12.8, Q×f=307,319 GHz (@9.88 GHz), and τ_f=−35 ppm/°C were achieved in the x=0.06 sample as sintered at 1275 °C for 6 h.     

Microwave dielectric properties of YAG ceramics prepared by sintering pyrolysised nano-sized powders

YAG ceramics with good dielectric properties were prepared via a modified pyrolysis method, with yttrium nitrate as the yttrium source and combined aluminium sulphate and aluminium nitrate as aluminium sources, and subsequent sintering in a muffle furnace. The effects of the different aluminium sources on the powder characteristic and the impact of sintering temperature, sintering aids (TEOS) and additive (TiO₂) on the dielectric properties of the ceramics were studied. The results show that well-dispersed pure YAG nano-powders can be obtained after calcination at 1000 °C with an aluminium sulphate and aluminium nitrate molar ratio of 1.5:2. The relative density, permittivity (ε_r) and quality factor (Q×f) of the YAG ceramics increase with sintering temperature and TEOS addition. TiO₂ can greatly promote τ_f to near-zero but decreases Q×f. The relative density, ε_r, Q×f and τ_f of the YAG–1 wt% TEOS–1 wt% TiO₂ ceramic obtained at 1520 °C are 97.6%, 9.9, 71, 738 GHz and −30 ppm/°C, respectively.     

Structure and dielectric properties of novel low temperature co-fired Bi2O3-RE2O3-MoO3 (RE=Pr,Nd, Sm,and Yb) based microwave ceramics

Novel monoclinic Bi₂O₃-xRE₂O₃-yMoO₃ (RE=Pr, Nd, Sm, and Yb) based low temperature co-fired ceramics (LTCC) systems with high sintering density and low microwave dielectric loss are synthesized by conventional solid state reaction technique. The structure and dielectric properties of Bi₂O₃-xRE₂O₃-yMoO₃ ceramics are investigated. Dense BiNdMoO₆ ceramics sintered at 900 °C for 8 h in air have a low dielectric constant ε_r=~7.5, a high quality factor Q×f=~ 24, 800 GHz at 7.0 GHz, and τ_f=~−16 ppm/̊C. Especially, good chemical compatibility of BiNdMoO₆ with Ag electrodes is represented as well. In contrast, BiSmMoO₆ ceramics sintered at 1000 °C for 8 h show enhanced Q×f=~43, 700 GHz at 7.8 GHz with ε_r=~8.5 and τ_f=~−27 ppm/°C. Bi₂O₃-xRE₂O₃-yMoO₃ (RE=Pr, Nd, Sm, and Yb) based ceramics could be considered as promising microwave ceramics for LTCC applications.     

Structure and properties of low temperature sintered ZnTa2O6 microwave dielectric ceramics

ZnTa₂O₆ microwave dielectric ceramics have been prepared using ZnTa₂O₆ nano-powders synthesized by sol–gel processing in this study. The crystal structure and microstructure of the ZnTa₂O₆ powders and ceramics were characterized by XRD and SEM techniques. ZnTa₂O₆ ceramics can be densified at a lower sintering temperature of 1200 °C. Microwave dielectric properties show that both of Q × f and ?_r values are lower than those of ceramics prepared by solid state route, and the τ_f values do not show different from that of solid state route. ZnTa₂O₆ ceramics sintered at 1200 °C exhibit good microwave dielectric properties: Q × f = 50,600 GHz, ?_r = 35.12 and τ_f = 9.69 ppm/°C.     

Low-temperature sintering and microwave dielectric properties of Nd(Co1/2Ti1/2)O3 ceramics using glass addition of oxides

The microstructures and microwave dielectric characteristics of complex perovskite Nd(Co_1/2Ti_1/2)O₃ ceramics with 60P₂O₅–15ZnO–5La₂O₃–5Al₂O₃–5Na₂O–5MgO–5Yb₂O₃ (PZLANMY) additions (1–4 wt%) prepared through the conventional solid-state route were investigated. It was found that Nd(Co_1/2Ti_1/2)O₃ ceramics can be sintered at 1210 °C owing to the sintering aid of PZLANMY-glass addition. At 1300 °C, Nd(Co_1/2Ti_1/2)O₃ ceramics with 1 wt% of PZLANMY-glass addition possess a dielectric constant (ε_r) of 27, a Q×f value of 64,000 GHz and a temperature coefficient of resonant frequency (τ_f) of ?29 ppm/°C. The PZLANMY-glass doped Nd(Co_1/2Ti_1/2)O₃ ceramics can find applications in microwave devices that require low sintering temperature.     

Sintering behavior and microwave dielectric properties of Ca1-xBixW1-xVxO4 ceramics

Structure, sintering behavior and microwave dielectric properties of ceramics have been investigated by x-ray powder diffraction (XRD) and scanning electron microscopy (SEM) in this paper. The microwave dielectric properties of the ceramics were studied with a network analyzer at the frequency of about 6–11 GHz. The sintering temperature and microwave dielectric properties could be successfully tuned in a wide window simultaneously by adjusting the A–O bond characteristics. The sintering temperature of CaWO₄ was successfully reduced from 1100 °C to about 950 °C by BiVO₄ addition. Approximately 95%–96% theoretical density could be obtained after sintering at 950 °C for 2 h. All samples exhibit single Scheelite structure (I4₁/a) phase. The dielectric constant increased, whereas the Q×f value decreased, with the increase of x. The τ_f value changed from negative to positive with the increases of x. Combined excellent microwave dielectric properties with ε_r=22. 1, Q×f=16,730 GHz and τ_f=2.39 ppm/°C could be obtained after sintered at the 950 °C for 2 h for x=0.3 compositions.     

Characterization and dielectric behavior of willemite and TiO2-doped willemite ceramics at millimeter-wave frequency

Willemite ceramics (Zn₂SiO₄) have been successfully prepared in the temperature range from 1280 to 1340 °C. It is found that willemite ceramics possess excellent millimeter-wave dielectric properties: a dielectric constant ɛ_r value of 6.6, a quality factor Q × f value of 219,000 GHz and a temperature coefficient of resonant frequency τ_f value of −61 ppm/°C. By adding TiO₂ with large positive τ_f value (450 ppm/°C), near zero τ_f value can be achieved in a wide sintering temperature range. With 11 wt% of TiO₂, an ɛ_r value of 9.3, a Q × f value of 113,000 GHz, and a τ_f value of 1.0 ppm/°C are obtained at 1250 °C. The relationships between microstructure and properties are also studied. Our results show that willemite with appropriate TiO₂ is an ideal temperature stable, low ɛ_r and high Q × f dielectric for millimeter-wave application.     

Preparation and microwave dielectric properties of low-loss MgZrNb2O8 ceramics

A novel low-loss microwave dielectric material MgZrNb₂O₈ was reported for the first time. Single-phase MgZrNb₂O₈ was prepared by a conventional mixed-oxide route and sintered in the temperature range of 1280–1360 °C. The microstructure and microwave dielectric properties were investigated systematically. The X-ray diffraction results showed that all samples exhibit a single wolframite structure. When the sintering temperature was lower than 1340 °C, the Q×f value mainly depended on the relative density. However, when the sintering temperature was above 1340 °C, the Q×f value mainly relied on the grain morphology in addition to the density. The MgZrNb₂O₈ ceramic sintered at 1340 °C for 4 h exhibited excellent microwave dielectric of ε_r=26, Q×f=120,816 GHz (where f=6.85 GHz), and τ_f=?50.2 ppm/°C. These results demonstrate that MgZrNb₂O₈ could be a promising candidate material for the application of highly selective microwave ceramic resonators and filters.     

Microwave dielectric properties of LiNb3O8 ceramics with TiO2 additions

The microwave dielectric properties of LiNb₃O₈ ceramics were investigated as a function of the sintering temperature and the amount of TiO₂ additive. LiNb₃O₈ ceramics, which were calcined at 750 °C and sintered at 1075 °C for 2 h, showed a dielectric constant (ɛ_r) of 34, a quality factor (Q × f₀) of 58,000 GHz and a temperature coefficient of resonance frequency (τ_f) of −96 ppm/°C, respectively. The density of the samples influenced the properties of these properties. As the TiO₂ content increased in the LiNb₃O₈–TiO₂ system, ɛ_r and τ_f of the material were increased due to the mixing effect of TiO₂ phase, which has higher dielectric constant and larger positive τ_f. The 0.65LiNb₃O₈–0.35TiO₂ ceramics showed a dielectric constant ɛ_r of 46.2, a quality factor (Q × f₀) of 5800 GHz and a temperature coefficient of resonance frequency τ_f of near to 0 ppm/°C.     

Li4Mg3Ti2O9: A novel low-loss microwave dielectric ceramic for LTCC applications

Low-loss novel Li₄Mg₃Ti₂O₉ dielectric ceramics with rock-salt structure were prepared by a conventional solid-state route. The crystalline structure, chemical bond properties, infrared spectroscopy and microwave dielectric properties of the abovementioned system were initially investigated. It could be concluded from this work that the extrinsic factors such as sintering temperatures and grain sizes significantly affected the dielectric properties of Li₄Mg₃Ti₂O₉ at lower sintering temperatures, while the intrinsic factors like bond ionicity and lattice energy played a dominant role when the ceramics were densified at 1450 °C. In order to explore the origin of intrinsic characteristics, complex dielectric constants (ε^’ and ε^’’) were calculated by the infrared spectra, which indicated that the absorptions of phonon oscillation predominantly effected the polarization of the ceramics. The Li₄Mg₃Ti₂O₉ ceramics sintered at 1450 °C exhibited excellent properties of ε_r=15.97, Q·f=135,800 GHz and τ_f=−7.06 ppm/°C. In addition, certain amounts of lithium fluoride (LiF) were added to lower the sintering temperatures of matrix. The Li₄Mg₃Ti₂O₉−3 wt% LiF ceramics sintered at 900 °C possessed suitable dielectric properties of ε_r=15.17, Q·f =42,800 GHz and τ_f=−11.30 ppm/°C, which made such materials promising for low temperature co-fired ceramic applications (LTCC).     

Microwave dielectric properties of Re3Ga5O12 (Re: Nd,Sm, Eu,Dy and Yb) ceramics and effect of TiO2 on the microwave dielectric properties of Sm3Ga5O12 ceramics

Re₃Ga₅O₁₂ (Re: Nd, Sm, Eu, Dy and Yb) garnet ceramics sintered at 1350–1500 °C had a high quality factor (Q × f) ranging from 40,000 to 192,173 GHz and a low dielectric constant (ɛ_r) of between 11.5 and 12.5. They also exhibited a relatively stable temperature coefficient of resonant frequency (τ_f) in the range of −33.7 to −12.4 ppm/°C. In order to tailor the τ_f value, TiO₂ was added to the Sm₃Ga₅O₁₂ ceramics, which exhibited good microwave dielectric properties. The relative density and grain size increased with addition of TiO₂, resulting in the enhancement of Q × f value. The τ_f increased with the addition of TiO₂. Excellent microwave dielectric properties of ɛ_r = 12.4, Q × f = 240,000 GHz and τ_f = −16.1 ppm/°C were obtained from the Sm₃Ga₅O₁₂ ceramics sintered at 1450 °C for 6 h with 1.0 mol% TiO₂. Therefore, Re₃Ga₅O₁₂ ceramics, especially TiO₂-added Sm₃Ga₅O₁₂ ceramics are good candidates for advanced substrate materials in microwave integrated circuits (MICs) applications.     

Microwave dielectric properties and microstructures of Nd(Mg0.5Sn0.5−xTix)O3 ceramics

This study elucidates the microwave dielectric properties and microstructures of Nd(Mg_0.5Sn_0.5?xTi_x)O₃ ceramics with a view to their potential for microwave devices. The Nd(Mg_0.5Sn_0.5?xTi_x)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The X-ray diffraction patterns of the Nd(Mg_0.5Sn_0.4Ti_0.1)O₃ ceramics revealed no significant variation of phase with sintering temperatures. A dielectric constant (?_r) of 21.1, a quality factor (Q × f) of 50,000 GHz, and a temperature coefficient of resonant frequency (τ_f) of ?60 ppm/°C were obtained for Nd(Mg_0.5Sn_0.4Ti_0.1)O₃ ceramics that were sintered at 1550 °C for 4 h.     

Influence of Li2O–B2O3–SiO2 glass on the sintering behavior and microwave dielectric properties of BaO–0.15ZnO–4TiO2 ceramics

This paper reports the investigation of the performance of Li₂O–B₂O₃–SiO₂ (LBS) glass as a sintering aid to lower the sintering temperature of BaO–0.15ZnO–4TiO₂ (BZT) ceramics, as well as the detailed study on the sintering behavior, phase evolution, microstructure and microwave dielectric properties of the resulting BZT ceramics. The addition of LBS glass significantly lowers the sintering temperature of the BZT ceramics from 1150 °C to 875–925 °C. Small amount of LBS glass promotes the densification of BZT ceramic and improves the dielectric properties. However, excessive LBS addition leads to the precipitation of glass phase and growth of abnormal grain, deteriorating the dielectric properties of the BZT ceramic. The BZT ceramic with 5 wt% LBS addition sintered at 900 °C shows excellent microwave dielectric properties: ε_r=27.88, Q×f=14,795 GHz.     

Phase structure,band gap and microwave dielectric properties of Ba8Ti3Nb4−xSbxO24 ceramics

High dielectric constant and low loss ceramics in the Ba₈Ti₃Nb_4?xSb_xO₂₄ (x=0–2) system were prepared by conventional solid-state ceramic route. As x increased from 0 to 1.5, a single phase with hexagonal 8H perovskite structure was formed and the band gap values increased from 3.38 to 3.47 eV. However, the Sb₂O₃ secondary phase was detected as the x reached 2. The optimum sintering temperature was reduced from 1460 to 1380 °C, the quality factors (Q×f) were effectively enhanced from 22,900 to 38,000 GHz and τ_f was significantly lowered from 110 ppm/°C to 2 ppm/°C, whereas the dielectric constant decreased from 49 to 35. A good combined microwave dielectric properties with ε_r=37.5, Q×f=38,000 GHz, τ_f=15 ppm/°C were obtained for x=1.5.     

Microwave dielectric properties and low-temperature sintering of Ba3Ti4Nb4O21 ceramics with B2O3 and CuO additions

The low sintering temperature and the good dielectric properties such as high dielectric constant (ɛ_r), high quality factor (Q × f) and small temperature coefficient of resonant frequency (τ_f) are required for the application of chip passive components in the wireless communication technologies. In the present study, the sintering behaviors and dielectric properties of Ba₃Ti₄Nb₄O₂₁ ceramics were investigated as a function of B₂O₃–CuO content. Ba₃Ti₄Nb₄O₂₁ ceramics with B₂O₃ or CuO addition could be sintered above 1100 °C. However, the additions of both B₂O₃ and CuO successfully reduced the sintering temperature of Ba₃Ti₄Nb₄O₂₁ ceramics from 1350 to 900 °C without detriment to the microwave dielectric properties. From the X-ray diffraction (XRD) studies, the sintering behaviors and the microwave dielectric properties of low-fired Ba₃Ti₄Nb₄O₂₁ ceramics were examined and discussed in the formation of the secondary phases. The Ba₃Ti₄Nb₄O₂₁ sample with 1 wt% B₂O₃ and 3 wt% CuO addition, sintered at 900 °C for 2 h, had the good dielectric properties: ɛ_r = 65, Q × f = 16,000 GHz and τ_f = 101 ppm/°C.     

Two novel ultralow temperature firing microwave dielectric ceramics LiMVO6 (M = Mo,W) and their chemical compatibility with metal electrodes

Low temperature cofired ceramics technology (LTCC) has been widely studied and used in wireless communication because of their outstanding capability for device miniaturization and integration. However, many commercial microwave dielectric materials have high sintering temperatures that pose challenge for cofiring with inner electrodes. Herein, two brannerite vanadate LiMVO₆ (M = Mo, W) ceramics with intrinsically low sintering temperatures were prepared. Dense and stable LiMVO₆ (M = Mo, W) ceramics could obtained at 640 °C for LiMoVO₆ and 700 °C for LiWVO₆. Favorable microwave dielectric properties were also obtained with ε_r = 13.3, Q × f = 12,460 GHz, and τ_f = +101.0 ppm/°C for LiMoVO₆ and ε_r = 11.5, Q × f = 13,260 GHz, and τ_f = +163.8 ppm/°C for LiWVO₆. Moreover, the relationship between crystal structure and microwave dielectric properties was studied by means of packing fraction, bond valence, and octahedral distortion. Their chemical compatibility with the metal electrodes were confirmed.     

Influence of sintering temperature on dielectric properties and crystal structure of corundum-structured Mg4Ta2O9 ceramics at microwave frequencies

Microwave dielectric properties of corundum-structured Mg₄Ta₂O₉ ceramics were investigated as a function of sintering temperatures by an aqueous sol–gel process. Crystal structure and microstructure were examined by X-ray diffraction (XRD) technique and field emission scanning electron microscopy (FE-SEM). Sintering characteristics and microwave dielectric properties of Mg₄Ta₂O₉ ceramics were studied as a function of sintering temperature from 1250 °C to 1450 °C. With increasing sintering temperature, the density, ε_r and Qf values increased, saturating at 1300 °C with excellent microwave properties of ε_r=11.9, Qf=195,000 GHz and τ_f=?47 ppm/°C. Evaluation of dielectric properties of Mg₄Ta₂O₉ ceramics were also analyzed by means of first principle calculation method and ionic polarizability theory.     

The effect of sintering temperature and time on microwave properties of Sm(Zn1/2Ti1/2)O3 ceramics for resonators

The microwave dielectric properties of Sm(Zn_1/2Ti_1/2)O₃ ceramics have been investigated. Sm(Zn_1/2Ti_1/2)O₃ ceramics were prepared by conventional solid-state route with various sintering temperatures and times. The prepared Sm(Zn_1/2Ti_1/2)O₃ exhibited a mixture of Zn and Ti showing 1:1 order in the B-site. Higher sintered density of 7.01 g/cm³ can be produced at 1310 °C for 2 h. The dielectric constant values (ɛ_r) of 22–31 and the Q × f values of 4700–37,000 (at 8 GHz) can be obtained when the sintering temperatures are in the range of 1250–1370 °C for 2 h. The temperature coefficient of resonant frequency τ_f was a function of sintering temperature. The ɛ_r value of 31, Q  ×  f value of 37,000 (at 8 GHz) and τ_f value of −19 ppm/°C were obtained for Sm(Zn_1/2Ti_1/2)O₃ ceramics sintered at 1310 °C for 2 h. For applications of high selective microwave ceramic resonator, filter and antenna, Sm(Zn_1/2Ti_1/2)O₃ is proposed as a suitable material candidate.     

Microwave dielectric properties of BaO–4.3TiO2–0.5ZnO ceramics with BaCu(B2O5)

Effect of BaCu(B₂O₅) (BCB) addition on microwave dielectric properties and sintering behaviors of BaO–4.3TiO₂–0.5ZnO system (BTZ) ceramics were investigated to develop middle-k dielectric composition with low sintering temperatures. When a small amount of BCB was added to BTZ system, the sintering temperature can be lowered from 1100 °C to 900 °C due to the formation of BCB liquid phase. The system added with 7 wt% BCB was sintered at 900 °C for 2 h and ?_r of 31, Q × f of 18,200 GHz and τ_f of 3.8 ppm/°C were obtained. The suitability of BTZ ceramics for tape casting and cofiring with Ag electrodes was investigated, and no evidence of chemical reaction between Ag and ceramics was observed. The dielectric properties of the stacked multilayer plate without any electrodes were also measured. The result shows that the as-prepared BTZ ceramics are suitable for low-temperature co-fired ceramics applications.     

Effect of dopants on synthesis of BaTi4O9 and Ba2Ti9O20 ceramics prepared by reaction-sintering process

The effect of dopants on BaTi₄O₉ (BT4) and Ba₂Ti₉O₂₀ (B2T9) ceramics by the reaction-sintering process was investigated. CuO addition is more effective in lowering the sintering temperature of BT4 and B2T9 ceramics. MnO₂ and CuO addition are effective to obtain temperature stable BT4 ceramics. With MnO₂ addition, Q × f of BT4 ceramics could be raised. ZrO₂ addition is effective to obtain B2T9 ceramics with higher dielectric constant. With CuO addition, τ_f of B2T9 ceramics shifted toward negative values and 0 ppm/°C could be obtained. Optimum properties in BT4 doped with MnO₂ of ɛ_r = 37.1, Q × f = 51,200 GHz (at 7 GHz) and τ_f = 0 ppm/°C and in B2T9 doped with ZrO₂ of ɛ_r = 37.9, Q × f = 39,700 GHz (at 7 GHz) and τ_f = 5.9 ppm/°C were obtained.