Diffusivity of anion vacancies in WO3 passive films

The WO₃ films were grown in 0.1 M HClO₄ aqueous solution, at different formation potentials (E_f) in the range of 2.0-7.0 V versus sce, on W electrode. The anion diffusion coefficient (DO) of WO₃ films was calculated from EIS spectra, following the surface charge approach (at high-field limit approximation), the Point Defect Model and the Mott-Shottky analysis. Among the parameters necessary to evaluate DO, the half-jump distance (a) is very relevant, given that a small variation in a has a great impact in the calculation of DO. In this work, it is proposed the half-jump distance (a) should be evaluated from spectroscopic data (available in the literature). The value of a (∼1.9 Å) is taken from lattice constants of a-WO₃ (amorphous-WO₃), with different values of N (coordination number), and the lattice constants of m-WO₃ (monoclinic-WO₃). The calculated value of DO was ∼3 × 10⁻¹⁷ cm²/s.     

Degradation of the fluoroquinolone enrofloxacin by electrochemical advanced oxidation processes based on hydrogen peroxide electrogeneration

Solutions of the veterinary fluoroquinolone antibiotic enrofloxacin in 0.05 M Na₂SO₄ of pH 3.0 have been comparatively degraded by electrochemical advanced oxidation processes such as anodic oxidation with electrogenerated H₂O₂ (AO-H₂O₂), electro-Fenton (EF), photoelectro-Fenton (PEF) and solar photoelectro-Fenton (SPEF) at constant current density. The study has been performed using an undivided stirred tank reactor of 100 ml and a batch recirculation flow plant of 2.5 l with an undivided filter-press cell coupled to a solar photoreactor, both equipped with a Pt or boron-doped diamond (BDD) anode and a carbon-polytetrafluoroethylene gas diffusion cathode to generate H₂O₂ from O₂ reduction. In EF, PEF and SPEF, hydroxyl radical (OH) is formed from Fenton's reaction between added catalytic Fe²⁺ and generated H₂O₂. Almost total decontamination of enrofloxacin solutions is achieved in the stirred tank reactor by SPEF with BDD. The use of the batch recirculation flow plant showed that this process is the most efficient and can be viable for industrial application, becoming more economic and yielding higher mineralization degree with raising antibiotic content. This is feasible because organics are quickly oxidized with OH formed from Fenton's reaction and at BDD from water oxidation, combined with the fast photolysis of complexes of Fe(III) with generated carboxylic acids under solar irradiation. The lower intensity of UVA irradiation used in PEF with BDD causes a slower degradation. EF with BDD is less efficient since OH cannot destroy the most persistent Fe(III)-oxalate and Fe(III)-oxamate complexes. AO-H₂O₂ with BDD yields the poorest mineralization because pollutants are only removed with OH generated at BDD. All procedures are less potent using Pt as anode due to the lower production of OH at its surface. Enrofloxacin decay always follows a pseudo first-order reaction. Its primary aromatic by-products and short intermediates including polyols, ketones, carboxylic acids and N-derivatives are detected by GC-MS and chromatographic techniques. The evolution of F⁻, NO₃⁻ and NH₄⁺ ions released to the medium during each process is also determined.     

Estimation of standard reduction potentials of alkyl radicals involved in atom transfer radical polymerization

The redox properties of some alkyl radicals, which are important in atom transfer radical polymerization both as initiators and mimics of the propagating radical chains, have been investigated in CH₃CN by an indirect electrochemical method based on homogeneous redox catalysis involving alkyl halides (RX) and electrogenerated aromatic or heteroaromatic radical anions (D⁻). Dissociative electron transfer between RX and D⁻ yields an intermediate radical (R), which further reacts with D⁻ either by radical coupling or by electron transfer. Examination of the competition between these reactions, which depends on ED/D−°, allows determination of the standard reduction potential of R as well as the self-exchange reorganization energy λR/R⁻. The standard reduction potentials obtained for the radicals CH₂CN, CH₂CO₂Et and CH(CH₃)CO₂Me are −0.72 ± 0.06, −0.63 ± 0.07 and −0.66 ± 0.07 V vs. SCE, respectively. Quite high values of λR/R⁻ (from 122 to 164 kJ mol⁻¹) were found for all radicals, indicating that a significant change of structure accompanies electron transfer to R.     

In situ ESR spectroscopic evidence of the spin-trapped superoxide radical, O2, electrochemically generated in DMSO at room temperature

Superoxide radical (O₂⁻) was both electrochemically generated and detected at room temperature. In situ ESR spectroelectrochemistry with spin trapping was used for the radical detection. That is, the O₂⁻ radical was obtained in a DMSO solution under cyclic voltammetry conditions as soon as the potential of the dioxygen electroreduction was reached. This radical reacted then with a 5,5-dimethyl-1-pyrroline-N-oxide (DMPO) spin-trap reagent present in solution to form the DMPO-OOH adduct. The hyperfine coupling constants determined for the adduct were a_N = 1.285 mT, and in accord to those reported in literature.     

Electro-Fenton degradation of antimicrobials triclosan and triclocarban

The antimicrobials triclosan (2,4,4′-trichloro-2′-hydroxydiphenyl ether) and triclocarban (N-(4-chlorophenyl)-N′-(3,4-dichlorophenyl)urea) have been degraded by four electro-Fenton systems using undivided electrolytic cells with a Pt or boron-doped diamond (BDD) anode and a carbon felt or O₂ diffusion cathode. The main oxidant is hydroxyl radical (OH) produced both on the anode surface from water oxidation and in the medium by Fenton's reaction, which takes place between electrogenerated H₂O₂ and Fe²⁺ coming from cathodic reduction of O₂ and Fe³⁺, respectively. Triclosan from saturated aqueous solutions of pH 3.0 is completely removed in all cells, decreasing its decay rate in the order: Pt/carbon felt > BDD/carbon felt > Pt/O₂ diffusion > BDD/O₂ diffusion, in agreement with their OH generation ability from Fenton's reaction. Glyoxylic, maleic and oxalic acids are identified as aliphatic intermediates. Complexes between oxalic acid and iron ions persist largely in solution, although Fe²⁺-oxalato complexes are mineralized by OH in the medium and Fe³⁺-oxalato complexes are destroyed by OH on BDD. Analogous treatments of more concentrated triclosan solutions using a 20:80 (v/v) acetonitrile/water mixture as solvent evidence the role of hydroxyl radicals along the degradation. In this hydroorganic medium hydroxylated derivatives such as 2,4-dichlorophenol, 4-chlorocatechol, chlorohydroquinone and chloro-p-benzoquinone, and carboxylic acids such as maleic, oxalic, formic and acetic acids are detected as products. Complete destruction of iron-oxalato complexes and released Cl⁻ ion involves some oxidizing species coming from parallel acetonitrile oxidation. The same electro-Fenton systems also yield the overall removal of triclocarban in acetonitrile/water mixtures, giving rise to urea, hydroquinone, chlorohydroquinone, 1-chloro-4-nitrobenzene and 1,2-dichloro-4-nitrobenzene as primary intermediates.     

Electrochemical investigation of superoxide anion scavenging ability of 1,2,3-triketohydrindene hydrate in aprotic solvents

1,2,3-Triketohydrindene hydrate (NHy) shows well-defined redox electrochemistry in the formation of monoanionic radical (NHy⁻) and dianion (NHy²⁻) in nitrogen saturated aprotic solvents such as acetonitrile and dimethylsulfoxide. Cyclic voltammetry reveals that in an oxygen-saturated solution of DMSO, the oxidation peak of superoxide anion (O₂⁻) at −0.7 V versus Ag/AgCl wire electrode, decreases systematically with increasing NHy concentration. The similar behaviour is observed in the rotating disk voltammetry. On Pt disk, oxygen is reduced to O₂⁻ at a constant potential of −0.8 V and at Pt ring, O₂⁻ is oxidised to oxygen and the corresponding limiting current plateau in the ring voltammogram is decreased linearly as [NHy] is increased. In aqueous solutions, NHy is found to exhibit completely different redox chemistry due to its structural changes and hence showed no favourable redox potentials for efficient quenching of O₂⁻.     

Study on the oxidation of C4-phenolic-1,4-dihydropyridines and its reactivity towards superoxide radical anion in dimethylsulfoxide

Electrochemical characterization on glassy carbon electrode (GCE) and reactivity with superoxide radical anion in aprotic medium of three new synthesized C4-phenolic-1, 4-dihydropyridines is reported.Voltammetry, coulometry, controlled-potential electrolysis (CPE), UV-vis spectroscopy, ¹H NMR techniques were employed for the characterization of title compounds.The oxidation mechanism involves initially an oxidation process on the phenol moiety with the formation of the corresponding quinone followed by a second one affecting the dihydropyridine ring to give the pyridine derivative. Both processes appeared irreversible in character.Cyclic voltammetry was used to generate O₂⁻ by reduction on GCE of molecular oxygen in DMSO. The reactivity of DHPs towards O₂⁻ was directly measured by the anodic current decay of the radical in the presence of increasing concentration of tested 1,4-dihydropyridines and compared with the reaction of the reference antioxidant, Trolox. The linear correlations obtained between the anodic current of O₂⁻ and compound concentrations in the range between 0.01 mM and 1.00 mM allowed the determination of both the DHP antioxidant index (AI) and the concentrations needed to consume 50% of O₂⁻. Synthesized C4-phenolic 1,4-dihydropyridines exhibited significant scavenging capacity towards superoxide radical anion higher than Trolox and tested commercial 1,4-dihydropyridines.     

The importance of electrode material in environmental electrochemistry: Formation and reactivity of free hydroxyl radicals on boron-doped diamond electrodes

A model describing the hydroxyl radical (HO) concentration profile at the boron-doped diamond (BDD) electrode, in the presence and absence of organic compounds, is presented. It is shown that this profile depends strongly on the reaction rate constant between the HO and the organic compound. Furthermore, it is shown that the presence of organics affects the current-potential (I-V) curves. In fact, the higher the reaction rate between organics and HO, the higher is the shift of the I-V curves toward lower potential with respect to oxygen evolution. Supposing that water discharge to free hydroxyl radicals on BDD is governed by Nernst equation, this shift of the I-V curves toward lower potentials has been calculated and compared with the experimental data obtained on BDD using two model compounds: methanol and formic acid.     

Electrochemical destruction of chlorophenoxy herbicides by anodic oxidation and electro-Fenton using a boron-doped diamond electrode

The degradation of herbicides 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) in aqueous medium of pH 3.0 has been comparatively studied by anodic oxidation and electro-Fenton using a boron-doped diamond (BDD) anode. All solutions are totally mineralized by electro-Fenton, even at low current, being the process more efficient with 1 mM Fe²⁺ as catalyst. This is due to the production of large amounts of oxidant hydroxyl radical (OH) on the BDD surface by water oxidation and from Fenton’s reaction between added Fe²⁺ and H₂O₂ electrogenerated at the O₂-diffusion cathode. The herbicide solutions are also completely depolluted by anodic oxidation. Although a quicker degradation is found at the first stages of electro-Fenton, similar times are required for achieving overall mineralization in both methods. The decay kinetics of all herbicides always follows a pseudo first-order reaction. Reversed-phase chromatography allows detecting 4-chlorophenol, 4-chloro-o-cresol, 2,4-dichlorophenol and 2,4,5-trichlorophenol as primary aromatic intermediates of 4-CPA, MCPA, 2,4-D and 2,4,5-T, respectively. Dechlorination of these products gives Cl⁻, which is slowly oxidized on BDD. Ion-exclusion chromatography reveals the presence of persistent oxalic acid in electro-Fenton by formation of Fe³⁺-oxalato complexes, which are slowly destroyed by OH adsorbed on BDD. In anodic oxidation, oxalic acid is mineralized practically at the same rate as generated.     

Electrochemical incineration of p-cresol and o-cresol in the filter-press-type FM01-LC electrochemical cell using BDD electrodes in sulfate media at pH 0

This work shows a comparative study of the incineration of 2-mM p-cresol and o-cresol in 1 M-H₂SO₄ in aqueous media. Microelectrolysis studies indicated that both the p-cresol and o-cresol oxidation were carried out via hydroxyl radicals (OH) formed by water oxidation in the boron-doped diamonds (BDD)-H₂O-H₂SO₄-p-cresol and o-cresol interface. In both cases, the potential and current density ranges, where great amounts of OH are formed, were between 2.3 V ≤ E ≤ 2.75 V versus SHE and J = 10 mA cm⁻². Electrolyses in an undivided FM01-LC reactor were performed at different Reynolds values 27,129 ≤ Re ≤ 42,631, and at J = 10 mA cm⁻². For p-cresol and o-cresol, the rate of degradation was slow, however it increases slightly as a function of the Re, indicating that the oxidation involves a complex pathway; current efficiency also rises as a function of the Re. For p-cresol, the mineralization at Re = 42,631 reached 90%, with 71% current efficiency and an energy consumption of 7.84 kWh m⁻³; whereas o-cresol was mineralized to 84%, with 67% current efficiency and an energy consumption of 6.56 kWh m⁻³. The results obtained in this work demonstrated that o-cresol is more recalcitrant than p-cresol.     

Electrochemical study of tris(4-bromophenyl)amine and 2,2,6,6-tetramethylpiperidine-1-oxyl in room-temperature ionic liquids

The electrochemical behavior of tris(4-bromophenyl)amine (TBPA) and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) was comparatively studied in room temperature ionic liquids (RTILs) containing 1-butyl-3-methylimidazolium cation [BMIm]⁺ and the anions BF₄⁻, PF₆⁻and CF₃SO₃⁻. TEMPO showed a well-defined electrochemical reversibility with anodic to cathodic peak current ratio (I_a/I_c) equals to unity in all RTILs, at a glassy carbon electrode. In contrast, I_a/I_c ratio greater than unity was observed at all scan rates employed (10-1000 mV s⁻¹) in cyclic voltammograms (CV) of TBPA in RTILs. Controlled-potential bulk electrolysis of TBPA in RTILs yielded a dark blue colored solution of monocation TBPA⁺, which is stable under nitrogen. Diffusion coefficient of TBPA⁺ cation was determined in all three ILs by chronoamperometry and found to be at least one order of magnitude less than the calculated value of TBPA. This effect, in conjunction with the deviation of the I_a/I_c ratio from unity could be ascribed to ion-pairing interaction between the TBPA⁺ cation and the anion of the RTILs.     

Electro-Fenton, UVA photoelectro-Fenton and solar photoelectro-Fenton degradation of the drug ibuprofen in acid aqueous medium using platinum and boron-doped diamond anodes

The degradation of a 41 mg dm⁻³ ibuprofen (2-(4-isobutylphenyl)propionic acid) solution of pH 3.0 has been comparatively studied by electrochemical advanced oxidation processes (EAOPs) like electro-Fenton, UVA photoelectro-Fenton and solar photoelectro-Fenton at constant current density. Experiments were performed in a one-compartment cell with a Pt or boron-doped diamond (BDD) anode and an O₂-diffusion cathode. Heterogeneous hydroxyl radical (OH) is generated at the anode surface from water oxidation, while homogeneous OH is formed from Fenton's reaction between Fe²⁺ and H₂O₂ generated at the cathode, being its production strongly enhanced from photo-Fenton reaction induced by sunlight. Higher mineralization is attained in all methods using BDD instead Pt, because the former produces greater quantity of OH enhancing the oxidation of pollutants. The mineralization rate increases under UVA and solar irradiation by the rapid photodecomposition of complexes of Fe(III) with acidic intermediates. The most potent method is solar photoelectro-Fenton with BDD giving 92% mineralization due to the formation of a small proportion of highly persistent final by-products. The effect of Fe²⁺ content, pH and current density on photoelectro-Fenton degradation has been studied. The ibuprofen decay always follows a pseudo-first-order kinetics and its destruction rate is limited by current density and UV intensity. Aromatics such as 1-(1-hydroxyethyl)-4-isobutylbenzene, 4-isobutylacetophenone, 4-isobutylphenol and 4-ethylbenzaldehyde, and carboxylic acids such as pyruvic, acetic, formic and oxalic have been identified as oxidation by-products. Oxalic acid is the ultimate by-product and the fast photodecarboxylation of its complexes with Fe(III) under UVA or solar irradiation explains the higher oxidation power of photoelectro-Fenton methods in comparison to electro-Fenton procedures.     

Electrochemical behaviour of gold and stainless steel under proton irradiation and active RedOx couples

Model experiments are reported where proton beams delivered by the cyclotron located at CERI (CNRS-Orléans) are used for irradiating AISI 316L/water and Au/water high purity interfaces with 6 MeV protons. The free exchange potentials at the interfaces are recorded as a function of time at room temperature in situ before, under, and after proton irradiation. The evolutions are compared to those calculated for the Nernst potentials associated with the radiolytic RedOx couples. It is shown how the comparison gives evidence that five radiolytic species - O₂, H₂O₂, HO₂⁻, HO₂ and O₂⁻ - exchange electrons at the Au interfaces in a range of dose rates that vary over three orders of magnitudes, i.e. 0.0048 < dr(10⁷ Gy h⁻¹) < 4.8. The balance between the electron exchanges at Au interfaces is adjusted by the RedOx reactions associated with the above species. The free exchange potential reaches the same steady value for Au and AISI 316L interfaces irradiated at high doses, ≥2.5 × 10⁷ Gy, (0.020 ± 0.025) V versus NHE. Such low values are the first ones to be reported. The HO₂ and O₂⁻ radical disproportionations play a key role and control the potential at the interfaces under 6 MeV proton flux. This role is generally mostly overlooked for gamma irradiation.     

An electrochemical study of H2O2 decomposition on single-phase γ-FeOOH films

The electrochemical reduction and oxidation kinetics of hydrogen peroxide on γ-FeOOH films chemically deposited on indium tin oxide substrates were studied over the pH range of 9.2-12.6 and the H₂O₂ concentration range of 10⁻⁴ to 10⁻² mol dm⁻³. The Tafel slopes for H₂O₂ reduction and oxidation obtained from polarization measurements are 106 ± 4 and 93 ± 15 mV dec⁻¹, respectively, independent of pH and the concentration of H₂O₂. Both the reduction and oxidation of H₂O₂ on γ-FeOOH have a first-order dependence on the concentration of molecular H₂O₂. However, for the pH dependence, the reduction has an inverse first-order dependence, whereas the oxidation has a first-order dependence, on the concentration of OH⁻. For both cases the electroactive species is the molecular H₂O₂, not its base form, HO₂⁻. Based on these observations, reaction kinetic mechanisms are proposed which involve adsorbed radical intermediates; HOOH⁻ and HO for the reduction, and HO₂H⁺, HO₂, and O₂⁻ for the oxidation. These intermediates are assumed to be in linear adsorption equilibria with OH⁻ and H⁺ in the bulk aqueous phase, respectively, giving the observed pH dependences. The rate-determining step is the reduction or oxidation of the adsorbed H₂O₂ to the corresponding intermediates, a reaction step which involves the use of Fe^III/Fe^II sites in the γ-FeOOH surface as an electron donor-acceptor relay. The rate constant for the H₂O₂ decomposition on γ-FeOOH determined from the oxidation and reduction of Tafel lines is very low, indicating that the γ-FeOOH surface is a very poor catalyst for H₂O₂ decomposition.     

Electrochemical degradation of clofibric acid in water by anodic oxidation: Comparative study with platinum and boron-doped diamond electrodes

Aqueous solutions containing the metabolite clofibric acid (2-(4-chlorophenoxy)-2-methylpropionic acid) up to close to saturation in the pH range 2.0-12.0 have been degraded by anodic oxidation with Pt and boron-doped diamond (BDD) as anodes. The use of BDD leads to total mineralization in all media due to the efficient production of oxidant hydroxyl radical (OH). This procedure is then viable for the treatment of wastewaters containing this compound. The effect of pH, apparent current density, temperature and metabolite concentration on the degradation rate, consumed specific charge and mineralization current efficiency has been investigated. Comparative treatment with Pt yields poor decontamination with complete release of stable chloride ion. When BDD is used, this ion is oxidized to Cl₂. Clofibric acid is more rapidly destroyed on Pt than on BDD, indicating that it is more strongly adsorbed on the Pt surface enhancing its reaction with OH. Its decay kinetics always follows a pseudo-first-order reaction and the rate constant for each anode increases with increasing apparent current density, being practically independent of pH and metabolite concentration. Aromatic products such as 4-chlorophenol, 4-chlorocatechol, 4-chlororesorcinol, hydroquinone, p-benzoquinone and 1,2,4-benzenetriol are detected by gas chromatography-mass spectrometry (GC-MS) and reversed-phase chromatography. Tartronic, maleic, fumaric, formic, 2-hydroxyisobutyric, pyruvic and oxalic acids are identified as generated carboxylic acids by ion-exclusion chromatography. These acids remain stable in solution using Pt, but they are completely converted into CO₂ with BDD. A reaction pathway for clofibric acid degradation involving all these intermediates is proposed.     

Synthesis and high electrochemical activity of poly(aniline-co-2-amino-4-hydroxybenzenesulfonic acid)

Poly(aniline-co-2-amino-4-hydroxybenzenesulfonic acid) (PAAHB) was synthesized using chemical oxidative copolymerization of aniline and 2-amino-4-hydroxybenzenesulfonic acid (AHB) in the presence of an ionic liquid at 50 °C. The conductivity of the PAAHB copolymer synthesized at the optimum conditions is 0.47 S cm⁻¹ that is lower than that of polyaniline, but is slightly affected by water. The cyclic voltammograms demonstrate that the PAAHB copolymer has excellent redox activity from highly acidic solution to pH 12.0 in a wider potential range. This is attributed to the synergistic effect of the SO₃⁻ and OH functional groups in the copolymer chain and the ionic liquid incorporated into the PAAHB film. It is evident that the pH dependence of the redox activity and conductivity of the PAAHB copolymer prepared chemically is much better than that of polyaniline, and is further improved, compared to the PAAHB copolymer prepared electrochemically. The proton NMR spectrum of the PAAHB copolymer demonstrates that the SO₃⁻ group exists in the copolymer chain instead of the SO₃H group. The ESR spectra show that the ESR signal intensity is a function of the monomer concentration ratio of AHB to aniline in the mixture. The morphology of the PAAHB copolymer is also dependent on the monomer concentration ratio in the mixture.     

Correlation of cyclic voltammetry behaviour and photooxidative properties of indoprofen and its photoproducts

The electrochemical behaviour of indoprofen (INP) and its photoproducts was investigated in acetonitrile containing tetrabutylammonium hexafluorophosphate at a Pt or Cv ultramicro-electrodes. These photosensitizers (PS) undergo irreversible oxidation yielding at first a radical cation PS⁺ and more or less reversible reductions through monoelectronic exchange involving a radical anion PS⁻. By varying the potential scan speed, the stabilities of the radical anions were evaluated. The determination of the redox potential and Rehm-Weller's equation shows the high exergonicity of the oxidative photodamagings whatever is the compound PS. The difference in DNA photosensitizing properties could rather be related to a kinetic control and then to the relative stabilities of the radical anions PS⁻. Cyclic voltammetry was found powerful in order to get a new insight in the photosensitizing properties of drugs.     

Mechanisms of NH3 formation during the reaction of H2 with nitrogen containing carbonaceous materials

A molecular modeling study using density functional theory was carried out in order to get an insight of the thermodynamics and mechanisms for NH₃ evolution during the reaction of hydrogen with nitrogen containing carbonaceous materials using pyridinic nitrogen species as a model. Both zigzag and armchair configurations were used to model the local structure of the carbonaceous materials. Based on thermodynamic argument, we propose reaction mechanisms that involve consecutive hydrogenation steps and rearrangements that lead to the formation of C-NH₂ groups. Dissociation of the C-N bond releases NH₂ radicals to the gas phase. NH₃ can be produced either through homogeneous or heterogeneous hydrogen abstraction or recombination reactions. It was found that the first hydrogenation reaction is highly exothermic, further hydrogenations are endothermic. Several pathways for NH₃ evolution were proposed, most of them are exothermic reactions. Rate constants for the NH₂ desorption step were calculated using the transition state theory.