共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
美国提高铝熔炼炉、热处理炉加热效率降低能耗的方法 总被引:1,自引:0,他引:1
在铝加工生产过程中,热能消耗占总能耗的比例非常大。需要消耗热能的工艺包括:(1)熔炼:燃气反射炉的干燥、预热、熔炼、合金化处理和保温;(2)半成品加工:铸锭浇铸、均匀化处理、退火、固溶热处理;(3)成品加工:预热、均匀化处理、退火、固溶热处理、时效、表面涂层的干燥。铝生产企业可以通过下述方法使各种熔炼炉和热处理炉的能耗减少10%30%。★改进生产工艺★定期维修保养★提高成本效益★改进炉子设计★采用先进的材料、传感元件和控制元件,并采用联合生产工艺。铝熔炼过程的节能途径Routestoenergysavinginaluminumsmelting铝生产企业节… 相似文献
3.
《有色金属(冶炼部分)》2014,(11):8-9
<正>江苏新宏大集团主要服务于生产硫酸、磷酸、磷复肥、氮肥、钛白、氧化铝等企业,是江苏省高新技术企业、2000年被评为中国专利江苏百强企业、英国SGS公司ISO9001:2008认证企业。三大系列产品★搅拌系列★浓密机系列★压滤机系列浓密机系列浓密机采用多点驱动,全自动控制模式,可与客户DCS系统结合,提升高度范围大。通过扭矩显示器随时测出刮泥耙在运转过程中扭力的变化情况。耙体设计科学合理,不会发生过载。高效的深层入料、平流沉降技术,浓密效率高。 相似文献
4.
5.
A mathematical model for describing the melting process in the medium-frequency induction furnace was developed.Finite difference method was applied to deal with coupling electromagnetic field and temperature field in the melting process.The magnetic induction,temperature distribution and the phase interface moving characteristic during melting of the furnace burden were calculated.The effects of the direct current and inductive heating frequency on the process were analyzed.The simulation results show that:In the direction of burden radius,magnetic induction decreases from the outside of the burden to the center.Solid/liquid interface moves gradually from the outside of the burden to the center.The movement speed increases when the burden begins to melt.In the direction of the burden height,the distribution of eddy current in the surface is accord with the edge effect of the coil.Solid/liquid interface moves gradually from the center to the two sides.The direct current has a greater effect on the electromagnetic field and temperature field than frequency. 相似文献
6.
7.
8.
某铜业公司由Ajax公司引进的2400kw铜熔化炉是目前国内最大的工频感应铜熔化炉,采用两只感应器、T型接线及晶闸管无级调压调功。本文对这台熔化炉的主回路进行了详细分析,指出了其几个值得借鉴的设计特点,并结合国内外工频感应炉的现状,探讨了未来工频感应炉的发展方向。 相似文献
9.
对熔化炉的技术要求,其中心环节是熔化技术,它涉及到原材料的熔化前处理,炉子操作,保温,熔液的处理,对环境的公害等多方面的内容。现将在大型熔化炉上实际应用的部分最新技术介绍如下。一、铝熔化炉的传热过程熔化技术的中心意题是快速熔化、节能和减少金属的烧损,这几方面是相互制约的。以往的大型熔化炉多数是以反射型为主,因此,要满足快速熔化、节能、减少金属烧损的要求则是很困难的。另外,传递给熔化炉中材料的热量,用以 相似文献
10.
《有色金属(冶炼部分)》2014,(11):6-7
<正>企业资质●江苏省高新技术企业●机电设备安装工程专业承包三级资质●中国磷肥、硫酸行业设备服务网资质——设备制造、施工安装,专业产品供应资格●通过NQA(英国国际质量认证中心)的质量管理体系认证企业荣誉★2005年中国工业排头兵企业★1995年江苏省环境保护产业百强企业★2004年质量、信誉双保障示范单位★2003年中国绿色产品名优企业荣誉单位★执行标准优秀企业★"蓝电"牌商标被誉为江苏省著名商标 相似文献
11.
通过对电工用铜线坯生产过程能源消耗的分析,指出天然气(或液化石油气)是生产过程中能源消耗的最重要部分,竖式熔化炉是燃气消耗的重点设备,研究并有针对性的提出了节能措施。 相似文献
12.
《有色金属(冶炼部分)》2016,(2):6-7
正新宏大产品铸就新天地江苏新宏大集团主要服务于冶金、矿山、硫酸、磷酸、磷复肥、氮肥、钛白,氧化铝等企业,是高新技术企业、2000年被评为中国专利江苏百强企业、英国SGS公司ISO9001:2008认证企业。三大系列产品★搅拌系列★浓密机系列★压滤机系列浓密机系列(江苏省高新技术产品)浓密机采用多点驱动,全自动控制模式,可与客户DCS系统结合,提升高度范围大。通过扭矩显示器随时测出刮泥耙在运转过程中扭力的变化情况。耙体设计科学合理,不会发生过载。高效的深层入料、平流沉降技术,浓密效率高。 相似文献
13.
针对冶金企业生产工艺特点,提出对生产过程中产生煤气的回收利用问题。从公司对煤气回收利用的应用实践中,阐述燃气联合循环发电在企业节能减排中的重要作用,并介绍燃气联合循环发电设备、工作原理、应用与发展。综合比较联合循环发电与其它火电的技术指标,突出联合循环发电的优越性;由此说明联合循环发电在冶金企业节能减排中的推广应用价值。 相似文献
14.
烧油烧气均可,可用在感应熔化炉的废钢预热。 1.优点 对装入物料进行预热,可以除去其中的水份、油和其它杂质。 这就带来如下好处: ①在炉子装料时,因炉料中去掉了残留水,所以不存在由水喷带来的危险。 ②可以改善铸件的质量,例如,这种改善来自于熔体吸氢量的降低。 ③可减少熔化炉的排出物,烟尘和水蒸汽也可降至最低量。 相似文献
15.
16.
17.
18.
已有24台玻璃熔化炉由通常的空气—燃料系统转换为100%氧—燃料系统。实践证明氧—燃料供热系统的优点是:(1)减少NO_x、SO_x及CO_2;(2)节约燃料;(3)减少粉尘 相似文献
19.
MA Shao-hua 《钢铁研究学报(英文版)》2010,17(2):6-6
Abstract: During the HNS melting process, the absorption reaction of Nitrogen in the liquid steel by blowing NH3 and N2 was investigated respectively. In order to obtain higher content of nitrogen in steel, the liquid steel should be deoxidized and desulfurized because the [O] and [S] as surface activity element is not favorable to absorb nitrogen in melting process. Based on the metallurgical thermodynamics, the coupling reaction of NH3 with [O] can improve the generation of activity nitrogen atom in liquid steel. Nitrogen atom is easier to be absorbed than nitrogen molecule. At the same time, blowing ammonia gas can remove the oxygen from liquid steel and decreased the inclusion in the steel. Experiments of HNS melting in ten-kilogram inductive furnace indicated that, for liquid steel with same content of alloys and blowing the same mole of nitrogen , the absorption effect of nitrogen by blowing NH3 increase 18~75% than that of blowing N2.The technical process of melting HNS by blowing NH3 under normal pressure is feasible in industry production.h 相似文献